Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “error propagation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Present status and future prospects for ionospheric propagation corrections for precise time transfer using GPS

The ionosphere can be the greatest variable source of error in precise time transfer using Global Positioning System (GPS) satellites. For single frequency GPS users, the ionospheric correction algorithm can provide an approximate 50 percent r.m.s. correction to the time delay, but users who desire a more complete correction must make actual measurements of ionospheric time delay along the path to the GPS satellite. Fortunately, at least three commercial GPS receivers, specifically designed to measure and correct for ionospheric time delay, are now, or soon will be, available. Initial operation with two different types of GPS ionospheric receivers demonstrated a high degree of accuracy in measuring the ionospheric group delay. Results of these measurements are presented. For those who use a model to correct for ionospheric time delay, it is tempting to use daily values of solar 10.7 cm radio flux to correct a monthly average ionospheric time delay model for each day's operation. The results of correlation of daily maximum ionospheric time delay against solar radio flux values show a poor correlation will be obtained by this procedure. Prospects for improving ionospheric corrections during the declining phase of the present solar cycle are discussed.

Klobuchar, John A.↗
NASA NTRS1986

Mode 1 delamination growth in adhesively bonded joints under static and fatigue loads

The objective of this investigation was to characterize the pure mode 1 delamination growth in metal to metal adhesively bonded joints under static and fatigue loading conditions, using FM 73 adhesive. Double cantilever beam specimens (DCB) were used for pure mode 1 tests. Aluminum 2024-T3 adherends were bonded with FM 73 adhesive. Delamination was introduced during fabrication by inserting a Teflon film between the two adherends. The mode 1 strain energy release rate G sub I sub c was obtained directly from static DCB tests conducted in accordance with the ASTM designation D1876-12. Constant amplitude fatigue tests on DCB specimens were conducted to determine the relationship between delamination growth rate da/dN and strain energy release rate G sub I sub c for a pure mode 1 delamination growth. It is found that the debond propagation rate in adhesive joints using FM 73 is more sensitive to errors in design load than is typical crack growth rate in metallic structures.

Biswas, S. C.↗
NASA NTRS1994

Advanced Teleoperator Control System

Proposed teleoperator control system incorporates several advanced features to improve coordination between remote robotic manipulator (slave arm) and human operator at control manipulator (master arm). Provides superior performance in terms of error profiles and task-completion time in presence of human control errors varying over wide range and maintains stability under large signal-propagation delays. System highly robust in presence of nonlinearities and incorrect human commands in both position and rate modes of control.

Lee, Sukhan↗
NASA NTRS2005

Measurements of Aperture Averaging on Bit-Error-Rate

We report on measurements made at the Shuttle Landing Facility (SLF) runway at Kennedy Space Center of receiver aperture averaging effects on a propagating optical Gaussian beam wave over a propagation path of 1,000 in. A commercially available instrument with both transmit and receive apertures was used to transmit a modulated laser beam operating at 1550 nm through a transmit aperture of 2.54 cm. An identical model of the same instrument was used as a receiver with a single aperture that was varied in size up to 20 cm to measure the effect of receiver aperture averaging on Bit Error Rate. Simultaneous measurements were also made with a scintillometer instrument and local weather station instruments to characterize atmospheric conditions along the propagation path during the experiments.

Bastin, Gary L.↗
NASA NTRS1990

Effect of atmospherics on beamforming accuracy

Two mathematical representations of noise due to atmospheric turbulence are presented. These representations are derived and used in computer simulations of the Bartlett Estimate implementation of beamforming. Beamforming is an array processing technique employing an array of acoustic sensors used to determine the bearing of an acoustic source. Atmospheric wind conditions introduce noise into the beamformer output. Consequently, the accuracy of the process is degraded and the bearing of the acoustic source is falsely indicated or impossible to determine. The two representations of noise presented here are intended to quantify the effects of mean wind passing over the array of sensors and to correct for these effects. The first noise model is an idealized case. The effect of the mean wind is incorporated as a change in the propagation velocity of the acoustic wave. This yields an effective phase shift applied to each term of the spatial correlation matrix in the Bartlett Estimate. The resultant error caused by this model can be corrected in closed form in the beamforming algorithm. The second noise model acts to change the true direction of propagation at the beginning of the beamforming process. A closed form correction for this model is not available. Efforts to derive effective means to reduce the contributions of the noise have not been successful. In either case, the maximum error introduced by the wind is a beam shift of approximately three degrees. That is, the bearing of the acoustic source is indicated at a point a few degrees from the true bearing location. These effects are not quite as pronounced as those seen in experimental results. Sidelobes are false indications of acoustic sources in the beamformer output away from the true bearing angle. The sidelobes that are observed in experimental results are not caused by these noise models. The effects of mean wind passing over the sensor array as modeled here do not alter the beamformer output as significantly as expected.

Alexander, Richard M.↗
NASA NTRS1998

Preconditioning the Helmholtz Equation for Rigid Ducts

An innovative hyperbolic preconditioning technique is developed for the numerical solution of the Helmholtz equation which governs acoustic propagation in ducts. Two pseudo-time parameters are used to produce an explicit iterative finite difference scheme. This scheme eliminates the large matrix storage requirements normally associated with numerical solutions to the Helmholtz equation. The solution procedure is very fast when compared to other transient and steady methods. Optimization and an error analysis of the preconditioning factors are present. For validation, the method is applied to sound propagation in a 2D semi-infinite hard wall duct.

Baumeister, Kenneth J.↗
NASA NTRS1989

Impact of device level faults in a digital avionic processor

This study describes an experimental analysis of the impact of gate and device-level faults in the processor of a Bendix BDX-930 flight control system. Via mixed mode simulation, faults were injected at the gate (stuck-at) and at the transistor levels and, their propagation through the chip to the output pins was measured. The results show that there is little correspondence between a stuck-at and a device-level fault model, as far as error activity or detection within a functional unit is concerned. In so far as error activity outside the injected unit and at the output pins are concerned, the stuck-at and device models track each other. The stuck-at model, however, overestimates, by over 100 percent, the probability of fault propagation to the output pins. An evaluation of the Mean Error Durations and the Mean Time Between Errors at the output pins shows that the stuck-at model significantly underestimates (by 62 percent) the impact of an internal chip fault on the output pins. Finally, the study also quantifies the impact of device fault by location, both internally and at the output pins.

Suk, Ho Kim↗
NASA NTRS1999

Advanced Communications Technology Satellite (ACTS) Fade Compensation Protocol Impact on Very Small-Aperture Terminal Bit Error Rate Performance

The Advanced Communications Technology Satellite (ACTS) communications system operates at Ka band. ACTS uses an adaptive rain fade compensation protocol to reduce the impact of signal attenuation resulting from propagation effects. The purpose of this paper is to present the results of an analysis characterizing the improvement in VSAT performance provided by this protocol. The metric for performance is VSAT bit error rate (BER) availability. The acceptable availability defined by communication system design specifications is 99.5% for a BER of 5E-7 or better. VSAT BER availabilities with and without rain fade compensation are presented. A comparison shows the improvement in BER availability realized with rain fade compensation. Results are presented for an eight-month period and for 24 months spread over a three-year period. The two time periods represent two different configurations of the fade compensation protocol. Index Terms-Adaptive coding, attenuation, propagation, rain, satellite communication, satellites.

Cox, Christina B.↗
NASA NTRS2004

Performance and Reliability Optimization for Aerospace Systems subject to Uncertainty and Degradation

This report summarizes work performed by the Space Systems Laboratory (SSL) for NASA Langley Research Center in the field of performance optimization for systems subject to uncertainty. The objective of the research is to develop design methods and tools to the aerospace vehicle design process which take into account lifecycle uncertainties. It recognizes that uncertainty between the predictions of integrated models and data collected from the system in its operational environment is unavoidable. Given the presence of uncertainty, the goal of this work is to develop means of identifying critical sources of uncertainty, and to combine these with the analytical tools used with integrated modeling. In this manner, system uncertainty analysis becomes part of the design process, and can motivate redesign. The specific program objectives were: 1. To incorporate uncertainty modeling, propagation and analysis into the integrated (controls, structures, payloads, disturbances, etc.) design process to derive the error bars associated with performance predictions. 2. To apply modern optimization tools to guide in the expenditure of funds in a way that most cost-effectively improves the lifecycle productivity of the system by enhancing the subsystem reliability and redundancy. The results from the second program objective are described. This report describes the work and results for the first objective: uncertainty modeling, propagation, and synthesis with integrated modeling.

Miller, David W.↗
NASA NTRS2005

TRMM Re-Entry Planning: Attitude Determination and Control During Thruster Modes

The Tropical Rainfall Measuring Mission (TRMM) spacecraft has been undergoing design for a controlled re-entry to Earth. During simulation of the re-entry plan, there was evidence of errors in the attitude determination algorithms during thruster modes. These errors affected the bum efficiency, and thus planning, during re-entry. During thruster modes, the spacecraft attitude is controlled off of integrated Gyro Error Angles that were designed to closely follow the nominal spacecraft pointing frame (Tip Frame). These angles, however, were not exactly mapped to the Tip Frame from the Body Frame. Additionally, in the initial formulation of the thruster mode attitude determination algorithms, several assumptions and approximations were made to conserve processor speed. These errors became noticeable and significant when simulating bums of much longer duration (-10 times) than had been produced in flight. A solution is proposed that uses attitude determination information from a propagated extended Kalman filter that already exists in the TRMM thruster modes. This attitude information is then used to rotate the Gyro Error Angles into the Tip Frame. An error analysis is presented that compares the two formulations. The new algorithm is tested using the TRMM High-Fidelity Simulator and verified with the TRMM Software Testing and Training Facility. Simulation results for both configurations are also presented.

DeWeese, Keith↗
NASA NTRS2003

Efficient Low Dissipative High Order Schemes for Multiscale MHD Flows: Minimization of Delta * B Numerical Error - II

The generalization of a class of low-dissipative high order filter finite difference schemes for long time wave propagation of shock/turbulence/combustion compressible viscous gas dynamic flows to compressible MHD equations for structured curvilinear grids has been developed. The new scheme consists of a divergence free preserving high order spatial base scheme with a filter approach which can be divergence-free preserving depending on the type of filter operator being used, the method of applying the filter step, and the type of flow problem to be considered. Several variants of the filter approach that cater to different flow types are proposed. These filters provide a natural and efficient way for the minimization of the divergence of the magnetic field (Delta * B) numerical error in the sense that no standard divergence cleaning is required. Performance evaluation of these variants, and the key role that the proper treatment of their corresponding numerical boundary conditions can play will be illustrated. Many levels of grid refinement and detailed comparison with several commonly used compressible MHD shock-capturing schemes will be sought. For certain MHD 2-D test problems, divergence free preservation of the magnetic fields of these filter schemes has been achieved.

Sjoegreen, Bjoern↗
NASA NTRS1982

An improved pulse-height analyzer for energetic particle measurements in the upper atmosphere

An energetic particle spectrometer for measurements in the upper atmosphere by rocket is described. The system has two methods of processing data. One is a staircase generator using threshold detectors; the other is a peak detector. The system incorporates a logarithmic converter for better resolution at low amplitudes and better use of telemetry channels. The circuits are described and calibration procedures are given. Modifications are recommended for high flux environments. Appendices cover sampling error in the peak detector and modifications made to the receiver of the propagation experiment.

Dean, L.↗
NASA NTRS1988

Methods of correction for the 'wet' atmosphere in estimating baseline lengths from VLBI

The error in VLBI estimates of baseline length caused by unmodelled variations in the propagation path through the atmosphere is greater for longer baselines. Series of estimates of baseline lengths obtained using different methods to correct for the propagation delay caused by atmospheric water vapor are presented and discussed. The main methods are use of data from: a water-vapor radiometer (WVR) and Kalman-filtering of the VLBI data themselves to estimate the propagation delay. Since the longest timespan of WVR data associated with geodetic VLBI experiments was obtained at the Onsala Space Observatory in Sweden, results are presented for the following three baselines: (1) Onsala-Wettzell, FRG (920 km), (2) Onsala-Haystack/Westford, MA (5600 km), and (3) Onsala-Owens Valley (7914 km).

Elgered, G.↗
NASA NTRS2015

Overview of Threats and Failure Models for Safety-Relevant Computer-Based Systems

This document presents a high-level overview of the threats to safety-relevant computer-based systems, including (1) a description of the introduction and activation of physical and logical faults; (2) the propagation of their effects; and (3) function-level and component-level error and failure mode models. These models can be used in the definition of fault hypotheses (i.e., assumptions) for threat-risk mitigation strategies. This document is a contribution to a guide currently under development that is intended to provide a general technical foundation for designers and evaluators of safety-relevant systems.

Torres-Pomales, Wilfredo↗
NASA NTRS2017

Precomputing Process Noise Covariance for Onboard Sequential Filters

Process noise is often used in estimation filters to account for unmodeled and mismodeled accelerations in the dynamics. The process noise covariance acts to inflate the state covariance over propagation intervals, increasing the uncertainty in the state. In scenarios where the acceleration errors change significantly over time, the standard process noise covariance approach can fail to provide effective representation of the state and its uncertainty. Consider covariance analysis techniques provide a method to precompute a process noise covariance profile along a reference trajectory using known model parameter uncertainties. The process noise covariance profile allows significantly improved state estimation and uncertainty representation over the traditional formulation. As a result, estimation performance on par with the consider filter is achieved for trajectories near the reference trajectory without the additional computational cost of the consider filter. The new formulation also has the potential to significantly reduce the trial-and-error tuning currently required of navigation analysts. A linear estimation problem as described in several previous consider covariance analysis studies is used to demonstrate the effectiveness of the precomputed process noise covariance, as well as a nonlinear descent scenario at the asteroid Bennu with optical navigation.

onboard↗
NASA NTRS2020

Improved LOLA Elevation Maps for South Pole Landing Sites: Error Estimates and Their Impact on Illumination Conditions

We present new high-resolution topographic models of 4 high-priority lunar south pole landing sites based exclusively on the laser altimetry data acquired by the Lunar Orbiter Laser Altimeter (LOLA) onboard the Lunar Reconnaissance Orbiter. By iteratively adjusting the LOLA tracks to the LOLA-based digital elevation model (LDEM) in a self-consistent fashion, we reduce the orbital geolocation errors by over a factor of 10 such that the new ground track geolocation uncertainty is ~10–20 ​cm horizontally and ~2–4 ​cm vertically over each 16 ​× ​16 km region. These new and improved 5 ​m/pix LDEMs will be useful to constrain higher-resolution topographic models derived from imagery, which are not as well controlled geodetically and which can be hindered by shadows. We developed a method to estimate surface height uncertainty in the new LDEMs, which accounts for the reduced orbital errors and interpolation errors by assuming a fractal behavior for the short-scale topography. The LDEM surface height and slope uncertainties have typical RMS values of ~0.30–0.50 ​m and ~1.5–2.5°, respectively. Finally, we examine how height uncertainties propagate to variations in horizon elevation and thus the predicted illumination conditions at these polar latitudes, and we show how this error characterization can inform landing site studies.

Michael K Barker↗
NASA NTRS1982

Solar particle propagation and modulation theory

Developments related to solar flare particle propagation theory are considered, taking into account the transport equation currently employed to describe the propagation of solar flare particles. This equation does not take into consideration convection with the solar wind, drifts, and changes in particle energy. The equation was solved numerically to generate typical solar flare particle time profiles at 1 AU. The results, however, were not satisfactory. It was found that the numerical method used was apparently in error. New advances which provide approximate analytical solutions to the equation are reported. Questions of galactic cosmic ray propagation in interplanetary space are also discussed.

Lee, M. A.↗
NASA NTRS1985

Statrospheric warmings during the winter of 1979

Some of the arguments crucial to the current understanding of stratospheric warmings are recapitulated briefly. The circulation at 10 mb during the winter of 1979 is described. A review of numerical forecasts of stratospheric warmings reveals that, in general, these events are predictable from several days in advance. In some cases, however, relatively small errors in the predicted tropospheric zonal mean wind produce large differences in upward wave propagation and, consequently, in the stratospheric forecast.

Mechoso, C. R.↗