Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electronic conductivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Targeted synthesis and reaction mechanism discussion of Mo 2 C based insertion-type electrodes for advanced pseudocapacitors

Mo 2 C is one of the few compounds that possess good electronic conductivity. Meanwhile, it possesses a natural 1D zigzag tunnel structure that is ideally suited for fast ion diffusion. Here, an effective approach is demonstrated for fabrication of structurally stable N-doped Mo 2 C/C nanobelts. They demonstrate high and fast energy storage ability with initial capacitances of 1139 C g -1 at 1 mV s-1, 151 C g -1 at an extremely high scan rate of 2000 mV s -1 and 208 C g -1 at a discharge current density of 200 A g -1 . After electrochemical activation of cycling, the capacity is continuously enhanced and much higher capacitances of 2523 C g -1 at 1 mV s -1 and 1403 C g -1 at 50 A g -1 are achieved after 15,000 cycles at 50 mV s -1 . Using the power law, it is evaluated that a surface-controlled capacitive process makes the main contribution to the capacity, which is over 90% when the scan rates are higher than 10 mV s -1 and still high as 73% at 1 mV s -1 . From in situ synchrotron XRD, it is found that there is a negligible change in the crystal structure and volume during charging/discharging, reflecting an insertion-type charge storage mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The effect of chemically preintercalated alkali ions on the structure of layered titanates and their electrochemistry in aqueous energy storage systems

We introduce a novel chemical preintercalation synthesis technique based on a hydrogen peroxide induced sol–gel process to obtain alkali ion containing ternary layered titanates (MTO, where M = Li, Na, K). Synthesis parameters leading to the formation of single-phase materials with homogeneous elemental distribution are reported for each of the preintercalated ions. Our analyses indicate that the interlayer spacing in the structure of the layered titanates increases with the increase of the radius of the hydrated preintercalated ion. Scanning and transmission electron microscopy imaging revealed morphological diversity: the LTO phase crystallized as nanoplates assembled in “peony-like” spherical agglomerates while NTO and KTO particles exhibited a one-dimensional nanobelt or wire-like morphology, with the KTO nanobelts being shorter and more aggregated than the NTO nanobelts. Structural refinement corroborated by electron diffraction and high-resolution transmission electron microscopy revealed that the structure of the LTO phase is built by stacking Ti–O layers containing a single straight layer of connected TiO 6 octahedra. The layers in NTO and KTO structures form differently and consist of double Ti–O layers with two titanium rows and ragged arrangement of units built by TiO6 octahedra. The NTO electrodes exhibited the highest electrochemical performance in cells with aqueous 1 M Na 2 SO 4 electrolyte, followed by the KTO electrodes and then LTO electrodes, and this trend is maintained at various scan rates. The established relationships between the structure and electrochemical performance reveal that, in addition to interlayer distance and chemistry of the interlayer region, the structure of the layers can play an important role in charge storage properties of layered oxide electrodes. The double Ti–O layers in the structure of NTO and KTO phases provide a larger number of redox centers which could contribute to the superior electrochemical performance as compared to the LTO electrodes. Our findings indicate that layered materials containing double transition metal oxide layers are promising candidates for exfoliation and assembly with electronically conductive layers with the aim to create 2D heterostructures with high electrochemical performance.

25 ENERGY STORAGE↗

Quantifying the reaction mechanisms of a high-capacity CuP 2 /C composite anode for potassium ion batteries

Introducing metals into phosphorus to form metal phosphide materials as anodes for potassium ion batteries (PIBs) is an effective strategy to improve the electronic conductivity and alleviate the volume change during cycling, although with a compromise of capacity. Here in this paper, we explore a CuP 2 /C composite as a novel anode for PIBs, which delivers a high reversible capacity of >450 mA h g -1 . Unexpectedly, our results reveal that the POx components existing in the prepared composite are reversible, through a quantitative analysis via high-resolution solid-state 31 P NMR and synchrotron X-ray diffraction tests. Their potassiation products K 3 PO 4 and K 4 P 2 O 7 can react with K–P alloys and turn back to PO x during depotassiation, which probably accounts for the high capacity of the prepared material. The results also illustrate a crystallization–amorphization evolution process during cycling involving nanocrystalline α-K 4 P 6 , K 4 P 3 and KP, and amorphous K 4 P 6 , KP and K 3 P phases, among which, the amorphous phases are identified for the first time.

25 ENERGY STORAGE↗

Designing 1D multiheme peptide amphiphile assemblies reminiscent of natural systems

We discuss protein assemblies that bind and organize ordered arrays of cofactors yield function structures. Multiheme assemblies found in nature yield electronically conductivity 1D nanoscale fibers and are employed in anaerobic respiration. To understand the fundamental characteristics of these organized arrays, the design of peptide amphiphiles that assemble into 1D nanostructures and yield metalloporphyrin binding sites is presented. One challenge with this class of peptide amphiphiles is identifying the correct sequence composition for high affinity binding with high heme density. Here, the peptide c16-AH(Kx)n-CO 2 H is explored to identify the impact of sequence length (n) and amino acid identity (x = L, I, or F) on binding affinity and midpoint potential. When n = 2, the peptide assembly yields the greatest affinity. The resulting nanoscale assemblies yield ordered arrays of the redox active molecule heme and have potential utility in the development of supramolecular bioelectronic materials useful in sensing as well as the development of enzymatic materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Highly efficient organic solar cells with superior deformability enabled by diluting the small molecule acceptor content

Developing efficient organic solar cells (OSCs) with strong mechanical deformability is important to be addressed to ensure their operational reliability in wearable electronics. However, it is challenging to achieve mechanically robust polymer/small molecule OSCs with an efficiency over 17% due to the abundant brittle donor/acceptor (D/A) interface. Decreasing the small molecule content can reduce the brittle D/A interface area to enhance deformability, but it may also cause discontinuous electron-conducting regions and thus deteriorate photovoltaic performance. Here, we incorporate a polymer donor (D18) into a binary PTQ10cm-BTP-PhC6 system at a constant PTQ10:m-BTP-PhC6 ratio of 1 : 1.2 to minimize the D/A interfacial area and modulate phase separation, and subsequently fabricate mechanically reliable OSCs with high efficiency. The large incorporation of D18 molecules increases the crystallinity of m-BTP-PhC6 molecules because of the poor interaction between D18 and the two host materials, affording sufficient pathways for efficient charge percolation at a large D/A ratio. More importantly, highly aggregated m-BTP-PhC6 molecules help to minimize the D/A interfacial area, enabling ternary films with better deformability than their binary counterparts. As a result, ternary OSCs with a large D/A ratio of 1.5 : 1.2 exhibit a high efficiency of 17.3% with a crack-onset strain (COS) of 8.8%, which significantly outperforms their binary counterparts with an efficiency of 13.8% and a COS of 4.4%. Finally, diluting the content of small molecules and controlling intermolecular interaction through the introduction of the second polymer donor represents a promising strategy to fabricate efficient OSCs with superior deformability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A nitrogen- and carbonyl-rich conjugated small-molecule organic cathode for high-performance sodium-ion batteries

Organic-based cathode materials have attracted considerable attention for sustainable Na-ion batteries due to their great promise to overcome the issues arising from the insertion of large Na + into the rigid structures of conventional transition-metal-containing inorganic electrodes. The structural flexibility as a result of weak intermolecular interactions and simple electron- and ion-storage mechanisms found in organic compounds ensure facile and reversible transport of Na ions. In order to address the general drawbacks of small-molecule organic electrodes such as material dissolution in commonly used organic electrolytes and poor electronic conductivity, we report the use of a nitrogen- and carbonyl-rich highly extended π-conjugated small molecule, hexaazatrianthranylene (HATA) embedded quinone (HATAQ), as a cathode for sodium-ion batteries. The unique hydrogen bonds between highly functionalized conjugated HATAQ molecules allow supramolecular graphite-like 2D layered arrangements in the solid state which help facilitate the structural stability during long-term cycling and promote charge transfer. The compound delivers a capacity as high as 460 mA h g -1 at 500 mA g -1 and an excellent capacity retention of 99% (~138 mA h g -1 ) after 5000 cycles at an extremely high rate of 60 A g -1 . The reaction kinetics and redox mechanism of the material have been elucidated by several characterization techniques together with density functional theory (DFT) studies. The insights gained in this work could pave the way for ultra-high-performance small-molecule organic cathodes for sustainable energy storage.

25 ENERGY STORAGE↗

Template Assisted Lithium Superoxide Growth for Lithium-Oxygen Batteries

Developing batteries with energy densities comparable to internal combustion technology is essential for a worldwide transition to electrified transportation. Li-O2 batteries are seen as the ‘holy grail’ of battery technologies since they have the highest theoretical energy density of all battery technologies. Current lithium-oxygen (Li-O2) batteries suffer from large charge overpotentials related to electronic resistivity of the insulating lithium peroxide (Li2O2) discharge product. One potential solution is the formation and stabilization of a lithium superoxide (LiO2) discharge intermediate that exhibits good electronic conductivity. However, LiO2 is reported to be unstable at ambient temperature despite its favorable formation energy at -1.0 eV/atom. In this paper, based on our recent work on the development of cathode materials for aprotic lithium oxygen batteries including two intermetallic compounds, LiIr3 and LiIr, that are found to form good template interfaces with LiO2, a simple goodness of fit R factor to gauge how well a template surface structure can support LiO2 growth is developed. The R factor is a quantitative measurement to calculate the geometric difference in the unit cells of specific Miller Index 2D planes of the template surface and LiO2. Using this as a guide, the R factors for LiIr3, LiIr, and La2NiO4+, are found to be good. This guide is attested by simple extension to other noble metal intermetallics with electrochemical cycling data including LiRh3, LiRh, and Li2Pd. Finally, the template concept is extended to main group elements and the R factors for LiO2 (111) and Li2Ca suggest that Li2Ca is a possible candidate for the template assisted LiO2 growth strategy.

Intermetallics↗

TaO x electron transport layers for CO 2 reduction Si photocathodes

Electron transport layers (ETLs) used as components of photocathodes for light-driven CO 2 reduction (CO 2 R) in aqueous media should have good electronic transport, be stable under CO 2 R conditions, and, ideally, be catalytically inert for the competing hydrogen evolution reaction (HER). Here, using planar p-Si (100) as the absorbing material, we show that TaO x satisfies all three of the above criteria. TaO x films were synthesized by both pulsed laser deposition (PLD) and radio-frequency (RF) sputtering. In both cases, careful control of the oxygen partial pressure during growth was required to produce ETLs with acceptable electron conductivity. p-Si/TaO x photocathodes were interfaced with ca. 10 nm of a CO 2 R catalyst: Cu or Au. Under front illumination with simulated AM 1.5G in CO 2 -saturated bicarbonate buffer, we observed, for both metals, faradaic efficiencies for CO 2 R products of ~50% and ~30% for PLD TaO x and RF sputtered TaO x , respectively, at photocurrent densities up to 8 mA cm -2 . p-Si/TiO 2 /Cu photocathodes were also evaluated but produced mostly H 2 (>97%) due to reduction of the TiO 2 to Ti metal under CO 2 R conditions. In contrast, a dual ETL photocathode (p-Si/TiO 2 /TaO x /Cu) was selective for CO 2 R, which suggests a strategy for separately optimizing selective charge collection and the stability of the ETL/water interface. The maximum photovoltage obtained with p-Si/TaO x /Cu devices was 300 mV which was increased to 430–460 mV by employing ion implantation to make pn + -Si/TaO x /Cu structures. Photocathodes with RF sputtered TaO x ETLs are stable for CO 2 R for at least 300 min. In conclusion, techno-economic analysis shows that the reported system, if scaled, could allow for an economically viable production of feedstocks for chemical synthesis under the adoption of specific CO 2 credit schemes, thus becoming a significant component of carbon-neutral manufacturing.

36 MATERIALS SCIENCE↗

Defect-induced formation and frustration-driven multiple magnetic transitions in Gd 2 Co 0.90 Si 2.90

A new ternary compound, Gd 2 Co 0.90 Si 2.90 , has been synthesized in a chemically single phase by deliberately introducing lattice vacancies in the Co and Si sites. The system is characterized by DC magnetization, heat capacity, resistivity and density functional theory (DFT) calculations. Here, a detailed experimental study reveals that the system exhibits an antiferromagnetic transition below T N = 11.3 K followed by spin freezing behaviour below T B ~ 4.8 K. An additional high-temperature magnetic transition could also be detected at T H ~ 150 K, which is short range in character and is associated with defect-induced polarization of the conduction electrons. The spin-glass-like state formation in the system is additionally bolstered by the observation of magnetic relaxation and associated aging phenomena as well as the magnetic memory effect. On the basis of non-equilibrium dynamical behaviour, we argue that the glassy state in this compound favours the hierarchical model over the droplet model. DFT calculations and experimental outcomes establish that the ground state is magnetically frustrated due to the small energy difference between distinct spin configurations having closely spaced ground-state energies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Metal ion dopant-induced famatinite to chalcostibite phase transformation of copper antimony sulphide colloidal nanostructures: effect on photophysical and pseudocapacitance properties

Here, the strategic doping of transition metal ions into copper antimony sulphide (CAS) semiconducting nanostructures can significantly influence their photophysical and pseudocapacitive properties, for which there are few reports and therefore is the focus of this study. Accordingly, highly crystalline metal ion (Mn 2+ , Fe 2+ , Co 2+ , Ni 2+ and Zn 2+ ) doped off-stoichiometric copper rich/poor, antimony-rich/poor, and sulphur-poor CAS nanostructures (10–23 nm) were grown via colloidal (hot-injection) synthesis using metal diethyldithiocarbamate precursors. Importantly, metal ion doping significantly influences the structure and composition of the off-stoichiometric CAS nanostructures. Data from powder X-ray diffraction, Raman spectroscopy, high-resolution scanning/transmission electron microscopy, and energy dispersive X-ray spectroscopy confirm that the heavier metal ion dopants induce a novel phase transformation from famatinite (fCAS) to chalcostibite (cCAS) nanostructures. The influence of the metal ion dopants is also observed in the optical properties of as-synthesized nanostructures. This involves blue-shifted ultraviolet-visible absorption, reduced Urbach tailing, and tunable bandgaps between 2.17 and 2.38 eV. Also, the doped nanostructures display broad visible-near infrared photoluminescence via a triple radiative pathway with relatively short decay lifetimes between 0.2 and 6.1 ns. This is mediated by electronic transitions involving intrinsic (copper/antimony/sulphur interstitial) and extrinsic (metal ion interstitial) defect states. Additionally, electrodes prepared from Mn 2+ -doped fCAS nanostructures show enhanced pseudocapacitance via Na+ surface adsorption and intercalation relative to undoped fCAS electrodes, while Zn 2+ -doped cCAS electrodes exhibit pseudocapacitance via a combination of Na+ surface adsorption, intercalation, and redox reactions. These electrodes exhibit reduced charge transfer resistance, improved electronic conductivity and notably enhanced specific capacitance (∼222 F g −1 ), and charge transport, as measured in 1 M Na 2 SO 4 electrolyte via cyclic voltammetry and electrochemical impedance spectroscopy. To this end, the discovery of the metal ion-induced phase transformation presents a new avenue for optimizing the functional properties of fCAS and cCAS nanostructures, highlighting the critical role of metal ion-related defects in controlling the optical and electrochemical properties, towards potential solar absorption and energy storage applications.

25 ENERGY STORAGE↗

Insights into catalyst degradation during alkaline water electrolysis under variable operation

Energy conversion technologies that are key to decarbonization efforts face significant durability challenges due to variable operation. Understanding the impact of variable operation on catalytic stability and identifying the key variables that dictate degradation is crucial for developing robust technologies. Here, we present a comprehensive investigation of the effects of variable operation on liquid alkaline water electrolysis. Our findings reveal that variable operation induces severe degradation of Ni, Fe, and Co catalytic films that is not observed during steady-state operation. By systematically interrogating the electrode discharge during simulated shutdown tests using Raman spectroscopy and mass spectrometry techniques, we uncover significant alterations caused by reverse currents in real time. These include changes in crystal structure, composition, film thickness, electronic conductivity, and dissolution rates. Lab-scale electrolyzer experiments further highlight the impact of variable operation on catalyst materials under relevant conditions. Finally, we provide guidelines for leveraging these insights to advance electrocatalysis research. This work underscores the importance of integrating realistic stressors into stability testing and offers practical guidelines for catalyst design, performance evaluation, and industrial implementation. Collectively, insights from this study will drive the development of more resilient energy conversion technologies.

Marquez, Raul A. [Univ. of Texas, Austin, TX (Unit↗

A thermodynamic condition for ignition and burn-propagation in cryogenic layer inertially confined fusion implosions

A Lawson-like criterion for ignition (where self-heating dominates over all energy losses) in a dynamic implosion is developed, which accounts for asymmetry and for differences in an implosion x-ray confinement quality. It is shown that the thermodynamic ignition condition is equivalent to yield amplification levels of 16–32. Since negative pdV work of expansion after stagnation increases energy losses above that of x-ray and electron-conduction losses, the Lawson-like ignition criterion is necessary but not sufficient for igniting the hot spot to propagate into the DT fuel with sufficient vigor to generate high gain. Additionally, a higher dimensional generalization of the Lawson-like criterion, which includes the cooling of the implosion upon disassembly, does provide the needed criteria, and it shows that significantly higher temperature is needed for very high levels of yield amplification compared to what traditional ignition metrics imply.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Second-harmonic generation in nonlinear plasmonic lattices enhanced by quantum emitter gain medium

In this work, we report on a theoretical study of second-harmonic generation (SHG) in plasmonic nanostructures interacting with two-level quantum emitters (QEs) under incoherent energy pump. We generalize the driven-dissipative Tavis–Cummings model by introducing the anharmonic surface plasmon-polariton (SPP) mode coupled to QEs and examine physical properties of corresponding SPP-QE polariton states. Our calculations of the SHG efficiency for strong QE-SPP coupling demonstrate orders of magnitude enhancement facilitated by the polariton gain. We further discuss time-domain numerical simulations of SHG in a square lattice comprising Ag nanopillars coupled to QEs utilizing a fully vectorial nonperturbative nonlinear hydrodynamic model for conduction electrons coupled to Maxwell–Bloch equations for QEs. The simulations support the idea of gain enhanced SHG and show orders of magnitude increase in the SHG efficiency as the QEs are tuned in resonance with the lattice plasmon mode and brought above the population inversion threshold by incoherent pumping. By varying pump frequency and tuning QEs to a localized plasmon mode, we demonstrate further enhancement of the SHG efficiency facilitated by strong local electric fields. The incident light polarization dependence of the SHG is examined and related to the symmetries of participating plasmon modes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fantastic n = 4: Ce5Co4+xGe13−ySny of the A n +1M n X3 n +1 homologous series

Ce-based intermetallics are of interest due to the potential to study the interplay of localized magnetic moments and conduction electrons. Our work on Ce-based germanides led to the identification of a new homologous series An+1MnX3n+1 (A = rare earth, M = transition metal, X = tetrels, and n = 1–6). This work presents the single-crystal growth, structure determination, and anisotropic magnetic properties of the n = 4 member of the Cen+1ConGe3n+1 homologous series. Ce5Co4+xGe13−ySny consists of three Ce sites, three Co sites, seven Ge sites, and two Sn sites, and the crystal structure is best modeled in the orthorhombic space group Cmmm where a = 4.3031(8) Å, b = 45.608(13) Å, and c = 4.3264(8) Å, which is in close agreement with the previously reported Sn-free analog where a = 4.265(1) Å, b = 45.175(9) Å, and c = 4.293(3) Å. Anisotropic magnetic measurements show Kondo-like behavior and three magnetic transitions at 6, 4.9, and 2.4 K for Ce5Co4+xGe13−ySny.

Weiland, Ashley (ORCID:0000000171983559)↗