Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “direct casting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Determination of solid-propellant transient regression rates using a microwave Doppler shift technique

A microwave Doppler shift system, with increased resolution over earlier microwave techniques, was developed for the purpose of measuring the regression rates of solid propellants during rapid pressure transients. A continuous microwave beam is transmitted to the base of a burning propellant sample cast in a metal waveguide tube. A portion of the wave is reflected from the regressing propellant-flame zone interface. The phase angle difference between the incident and reflected signals and its time differential are continuously measured using a high resolution microwave network analyzer and related instrumentation. The apparent propellant regression rate is directly proportional to this latter differential measurement. Experiments were conducted to verify the (1) spatial and time resolution of the system, (2) effect of propellant surface irregularities and compressibility on the measurements, and (3) accuracy of the system for quasi-steady-state regression rate measurements. The microwave system was also used in two different transient combustion experiments: in a rapid depressurization bomb, and in the high-frequency acoustic pressure environment of a T-burner.

Strand, L. D.↗
NASA NTRS1993

Hot hydrogen testing of metallic turbo pump materials

The objectives of this investigation are to expose heat resistant alloys to hydrogen at elevated temperatures and to use various microstructural and analytical techniques to determine the chemical and rate process involved in degradation of these materials due to hydrogen environment. Inconel 718 and NASA-23 (wrought and cast) are candidate materials. The degradation of these materials in the presence of 1 to 5 atmospheric pressure of hydrogen from 450 C to 1100 C was examined. The hydrogen facility at Auburn University was used for this purpose. Control experiments were also conducted wherein the samples were exposed to vacuum so that a direct comparison of the results would separate the thermal contribution from the hydrogen effects. The samples were analyzed prior to and after exposure. A residual gas collection system was used to determine the gaseous species produced by any chemical reaction that may have occurred during the exposure. Analysis of this gas sample shows only the presence of H2 as expected. Analyses of the samples were conducted using optical microscopy, x-ray diffraction, scanning electron microscopy, and weight change. There appears to be no change in weight of the samples as a result of hydrogen exposure. In addition no visible change on the surface structure was detected. This indicates that the materials of interest do not have strong interaction with hot hydrogen. This is consistent with the microstructure results.

Zee, Ralph↗
DOE OSTI2020

Temporal dynamics of the alignment of the turbulent stress and strain rate

We report that the flux of energy between scales in turbulence can be cast as the result of the interaction between a turbulent stress and a rate of strain. Efficient energy transfer requires that these two tensors be oriented properly relative to each other, but previous work has shown that the instantaneous alignment between them is poor. Here, we consider the temporal dynamics of this alignment in a direct numerical simulation of isotropic turbulence. We show that the orientation of the stress lags behind that of the strain rate, both at a single location and along trajectories. However, the timescale of the reorientation of the stress in these cases does not follow the expected dynamical scaling with length scale. To capture the proper dynamical scaling, we reformulate the energy flux between scales using the right Cauchy-Green strain tensor and the second Piola-Kirchhoff stress tensor. Our results highlight the key role played by the deformation of fluid elements in the physics of the energy cascade, and suggest that their irreversible deformation is a Lagrangian manifestation of the cascade's broken time-reversal symmetry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1972

Development of gas-pressure bonding process for air-cooled turbine blades

An investigation was conducted on the application of gas-pressure bonding to the joining of components for convectively cooled turbine blades and vanes. A processing procedure was established for joining the fins of Udimet 700 and TD NiCr sheet metal airfoil shells to cast B1900 struts without the use of internal support tooling. Alternative methods employing support tooling were investigated. Testing procedures were developed and employed to determine shear strengths and internal burst pressures of flat and cylindrical bonded finned shell configurations at room temperature and 1750 F. Strength values were determined parallel and transverse to the cooling fin direction. The effect of thermal cycles from 1750 F to room temperature on strength was also investigated.

Meiners, K. E.↗
NASA NTRS1973

Additional thermal fatigue data on nickel and cobalt-base superalloys

The fluidized bed technique was used to measure the relative thermal fatigue resistance of 21 superalloys: B1900, B1900 DID, IN-100, MAR-M 200, Udimet 700 wrought and cast, NX-188, WAZ-20, TAZ-8A, M22, IN 713C, IN 738, IN 162, MAR-M 509, Rene 80, RBH, NASA VI A, TD-NiCr, MAR-M 302, WI-52, and X-40. IN-100, MAR-M 200, NX-188, WAZ-20 and TAZ-8A were also tested in the directionally solidified form. B1900, B1900 DID, IN-100, MAR-M200, Udimet 700, NX-188, WAZ-20 and TAZ-8A were tested with surface protection. Among the 36 variations of composition, solidification method, and surface protection the cycles to cracking differed by 2 to 3 orders of magnitude. Some alloys suffered serious weight losses and oxidation. Previous fluidized bed thermal fatigue data on some of these alloys were reported in N71-10027. Thermal fatigue data, oxidation, and dimensional changes are reported in N73-30507. Metallographic and hardness data are given in this report.

Howes, M. A. H.↗
NASA NTRS1982

Conservative supra-characteristics method for splitting the hyperbolic systems of gasdynamics for real and perfect gases

A conservative flux difference splitting is presented for the hyperbolic systems of gasdynamics. The stable robust method is suitable for wide application in a variety of schemes, explicit or implicit, iterative or direct, for marching in either time or space. The splitting is modeled on the local quasi one dimensional characteristics system for multi-dimensional flow similar to Chakravarthy's nonconservative split coefficient matrix method; but, as the result of maintaining global conservation, the method is able to capture sharp shocks correctly. The embedded characteristics formulation is cast in a primitive variable the volumetric internal energy (rather than the pressure) that is effective for treating real as well as perfect gases. Finally the relationship of the splitting to characteristics boundary conditions is discussed and the associated conservative matrix formulation for a computed blown wall boundary condition is developed as an example. The theoretical development employs and extends the notion of Roe of constructing stable upwind difference formulae by sending split simple one sided flux difference pieces to appropriate mesh sites. The developments are also believed to have the potential for aiding in the analysis of both existing and new conservative difference schemes.

Lombard, C. K.↗
NASA NTRS1974

The 1973 Ethiopian-Rift geodimeter survey

Remeasurement of the Adama, Lake Langana, and Arba Minch (Lake Margherita) geodimeter networks in 1973 has enabled Mohr's interpretation concerning possible surface ground deformation in the Ethiopian rift to be considerably developed. Extension appears to have occurred across the Mojjo-Adama horst at a rate of about 1 cm yr/1. The opposing rims of the Adama graben have not moved significantly relative to one another (between 1969 and 1973), but stations on the sliced graben floor show possible movement with a large rift-trend component. In the Wolenchiti quadrilateral, significant movement of station RABBIT is confirmed, but the radical change of vector (that of 1970-1971 to that of 1971-1973) casts doubt on a tectonic cause and seems to indicate that stations on steep hillslopes are liable to be unstable. South of the quadrilateral and east of the Adama graben, alternating rift-trend zones of extension and shortening appear to coexist. In the Lake Langana network, significant movements of the order of 0.5 cm yr/1 are directed perpendicular to the rift floor faulting.

Mohr, P. A.↗
NASA NTRS2010

Comments on "Atlantic Tropical Cyclogenetic Processes during SOP-3 NAMMA in the GEOS-5 Global Data Assimilation and Forecast System"

Considerable attention has been given to the potential negative impacts of the Saharan air layer (SAL) in recent years. Researchers recently raised questions about the negative impacts of Dunion and Velden and other studies in terms of storms that reached at least tropical storm strength and suggested that the SAL was an intrinsic part of the tropical cyclone environment for both storms that weaken after formation and those that intensify. Braun also suggested that several incorrect assumptions underlie many of the studies on the negative impacts of the SAL, including assumptions that most low-to-midlevel dry tropical air is SAL air, that the SAL is dry throughout its depth, and that the proximity of the SAL to storms struggling to intensify implies some role in that struggle. The recent paper by Reale et al.(RL1) is an example of the problems inherent in some of these assumptions. In their paper, RL1 analyze a simulation from the Global Earth Observing System (GEOS-5) global model and describe an extensive tongue of warm, dry air that stretches southward from at least 30 deg N (the northern limit of their plots) and wraps into a low pressure system during the period 26-29 August 2006, suppressing convection and possibly development of the African easterly wave associated with that low pressure system. They attributed the warm, dry tongue to the SAL (i.e., heating of the air mass during passage over the Sahara and radiative warming of the dust layer). Whether it was their intention, the implication is that this entire feature is due solely to the SAL and not to other possible sources of dry air or warmth. In addition, they suggested that a cool tongue of air in the boundary layer located directly beneath the elevated warm, dry tongue (forming a thermal dipole) was possibly the result of reduced solar radiation caused by an overlying dust layer. They stated that "the cool anomaly in the lower levels does not have any plausible explanation relying only on transport." In this comment, evidence from satellite and global meteorological analyses is presented that casts considerable doubt upon RL1 s interpretation of the GEOS-5 forecasts and their conclusion that the results implied a negative role of the SAL. We show that the major portion of the warm, dry air aloft was located in a nearly dust-free slot between two Saharan dust outbreaks, had a significant source from the midlatitudes (>30 N), and was likely driven by strong subsidence warming and drying. In addition, when wind fields are examined in a reference frame moving with the wave, National Centers for Environmental Prediction (NCEP) global meteorological analyses suggest that the cool tongue in the boundary layer can be readily explained by transport of cooler air from higher latitudes. At the very least, it offers a plausible alternative explanation for the cool tongue that does not rely on radiative impacts of the dust.

Braun, Scott A.↗
NASA NTRS1986

Geometric-optical bidirectional reflectance modeling of a conifer forest canopy

A geometric-optical forest canopy model that treats conifers as cones casting shadows on a contrasting background explains the major anisotropies in bidirectional reflectance measurements of a conifer forest canopy. The model uses parallel-ray geometry to describe the illumination and viewing of conifers as three-dimensional cones. Both computer simulation and analytical closed-form expressions are implemented. The results show a good qualitative agreement with the directional reflectance measurements of the conifer stand, indicating that the three-dimensional nature of the canopy is a key factor in determining its directional reflectance.

Li, X.↗
DOE OSTI2021

SAR Geolocation Using Range-Only Multilateration

Radar is by its basic nature a ranging instrument. If radar range measurements from multiple directions can be made and assembled, then multilateration allows locating a feature common to the set of Synthetic Aperture Radar (SAR) images to an accurate 3-D coordinate. The ability to employ effective multilateration algorithms is highly dependent on the geometry of the data collections, and the accuracy with which relative range measurements can be made. The problem can be cast as a least-squares exercise, and the concept of Dilution of Precision can describe the accuracy and precision with which a 3-D location can be made.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

SAR Geolocation Using Range-Doppler Multilateration

Radar is by its basic nature a ranging instrument. If radar range and range-rate measurements from multiple directions can be made and assembled, then multilateration allows locating a feature common to the set of Synthetic Aperture Radar (SAR) images to an accurate 3-D coordinate. The ability to employ effective multilateration algorithms is highly dependent on the geometry of the data collections, and the accuracy with which relative range measurements can be made. The problem can be cast as a least-squares exercise, and the concept of Dilution of Precision can describe the accuracy and precision with which a 3-D location can be made.

42 ENGINEERING↗
NASA NTRS1980

Comment on 'magnetosheath burst of predominantly medium nuclei observed with Imp 8 on February 16, 1974' by T. P. Armstrong, S. M. Krimigis, and R. P. Lepping

Armstrong et al. (1978) have observed a unique series of bursts with an unusually high content of Z greater than 2 particles and a high degree of collimation from the direction of the sun. The bursts were observed only with the CPME (Charged Particle Measurement Instrument) on Imp 8, but not with the CPME on Imp 7 nor with the ULET (Ultralow Energy Telescope) on Imp 8, whose response characteristics matched those of the CPME on Imp 7. The present comparison of the measurements made with the CPME and ULET cast doubt on the correctness of the reported observations.

Hovestadt, D.↗
DOE OSTI2024

Tropical Cyclone Wind Shear-Relative Asymmetry in Reanalyses

Abstract While tropical cyclones (TCs) are axisymmetric vortices to the first order, they often exhibit noteworthy structural asymmetries. These often result from environmental vertical wind shear, which tilts the vortex and induces a wavenumber 1 pattern in the circulation and precipitation fields. Reanalyses and climate models have improved in representing the TC structure and climatology, but their relatively coarse resolution and dependence on parameterized physics cast doubt on their ability to capture the asymmetric TC structure. We perform the most comprehensive process-oriented assessment of TC asymmetry to date in reanalyses. Specifically, we analyze the composite shear-relative TC structure in ERA5 and Climate Forecast System Reanalysis (CFSR), which vary in their resolutions, physical parameterization suites, and data assimilation techniques. These structures are compared with aircraft reconnaissance radar observations. In agreement with the observations, the strongest tangential winds are usually found left-of-shear, while inner core rainfall, ascent, vortex tilt, and low-level inflow are favored directly downshear or in the downshear-left quadrant. Outer rainband convection generally peaks in the downshear-right quadrant. Thermodynamic asymmetries are also apparent, with anomalous low-level moisture right-of-shear, midlevel warmth in the upshear-right quadrant (uptilt), and cloud properties suggestive of a realistic precipitation life cycle from growth to fallout. We also decompose rainfall contributions from the convective parameterization and large-scale cloud schemes and highlight the roles of vorticity advection, buoyancy advection, and diabatic processes in driving asymmetric vertical motions in the inner core and outer rainband regions. Our results suggest that process-level studies of TC asymmetry and TC–wind shear interaction under future warming are viable using climate models. Significance Statement Asymmetries are common in tropical cyclones (TCs), influencing their intensity, track, and hazards. Vertical wind shear often plays a leading-order role in causing these asymmetries. It is uncertain how well asymmetric structures and processes are captured in reanalyses and global climate models (GCMs) with grid spacings of 0.25° and coarser. In this study, we first evaluate TC asymmetry in reanalyses, which have the benefit of being forced by observations. This helps to assess whether the resolutions associated with GCMs sufficiently capture asymmetric structures and processes and motivates upcoming work with free-running GCMs to study how TC asymmetry may change in a warming climate.

Carstens, Jacob D.↗
NASA NTRS1984

Effect of localized polycrystalline silicon properties on solar cell performance

Several forms of polycrystalline silicon, mostly from cast ingots, (including UCP, SILSO and HEM) were studied. On typical slices, localized properties were studied in two ways. Small area (about 2.5 sq mm) mesa diodes were formed, and localized photovoltaic properties were measured. Also a small area (about .015 sq mm) light spot was scanned across the cells; the light spot response was calibrated to measure local diffusion length directly. Using these methods, the effects of grain boundaries, or of intragrain imperfections were correlated with cell performance. Except for the fine grain portion of SILSO, grain boundaries played only a secondary role in determining cell performance. The major factor was intra-grain material quality and it varied with position in ingots and probably related to solidification procedure.

Leung, D.↗
NASA NTRS2001

The Diffuse EUV and X-Ray Background as a Probe of the Interstellar Medium

We have used the Deep Survey telescope of the Extreme Ultraviolet Explorer to investigate shadows in the diffuse EUV/soft X-ray background that are cast by clouds in the interstellar medium. We confirm the existence of a shadow previously reported and provide evidence for two new shadows. We used IRAS data to identify the clouds producing these shadows and to determine their optical depth to EUV radiation. The EUV-absorbing clouds are optically thick in the EUV, and all EUV emission detected in the direction of these shadows must be produced from material in front of the clouds. We obtained new optical data to determine the distance to these clouds. We use a new differential cloud technique to obtain the pressure of the interstellar medium. These results do not depend on any zero-level calibration of the data. Our results provide evidence that the pressure of the hot interstellar gas is the same in three different directions in the local interstellar medium and is at least 8 times higher than that derived for the Local Cloud surrounding our Sun. This provides new evidence for large thermal pressure imbalances in the local ISM and directly contradicts the basic assumption of thermal pressure equilibrium used in almost all present models of the interstellar medium.

Lieu, Richard↗
DOE OSTI2022

Thermal conductivity of salvaged fused cast alumina used in the glass industry

Fused cast alumina (FCA) has been and continues to be used as a refractory material in energy intensive industries such as glass melting and chemical processing. In-service degradation due to high temperature exposure in harsh environment affects the designed furnace thermal profiles and energy consumption. Phase transformation may occur at the refractory hot face during glass melting altering the properties. Three FCA blocks recovered from industrial furnaces were investigated in this study. The as-received FCA consists primarily of a mixture of alpha (α) and beta (β) alumina that has a thermal conductivity value of 5–6 W/mK. The Hot Disk method was used to obtain thermal conductivity directly on the refractory blocks. At the hot face, a transformation from β to α alumina occurred and was confirmed by an X-ray diffraction study. Thermal conductivity measurements as a function of position also showed a clear transition from β to α alumina at both ends of a complete block with no voids. Thermal conductivity of the α alumina tripled compared to β alumina. This study provides important information of heat transfer and thermal conductivity evolution to refractory manufacturers and users.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Highly Loaded Sulfur Cathode, Coated Separator and Gel Electrolyte for High Rate Li-Sulfur Batteries

As one of DOE Battery 500 Seedling projects, Cornell University and EIC Labs investigated and developed i) highly loaded sulfur cathodes (> 3 mg/cm 2 ), ii) hybrid separators, and iii) gel ceramic electrolytes (GCE) to mitigate the low rate capability, shuttling effect and limited cycle life in high performance Li-Sulfur batteries. Scalable nanomanufacturing processes such as air-controlled electrospray (ACES) and gas-assisted electrospinning (GAES) have been utilized to develop directly deposited electrodes and polymer/ceramic hybrid separators. First, in the development of highly loaded cathodes, alternating layers of sulfur impregnated mesoporous carbon and graphene were fabricated via ACES and the resulting layered cathodes and coated separators exhibit higher capacity and capacity retention (about 1,000 mAh/g capacity with less than 0.02% fade/cycles) than single layer cathode or cathode prepared by conventional slurry cast. Alternating layer approach via ACES has been applied to high loading systems (3 - 5 mg S/cm 2 ), demonstrating the potential to increase sulfur utilization and capacity retention. We have also incorporated iron oxides (Fe 3 O 4 ) into S/mesoporous carbon/graphene cathodes to enhance sulfur utilization and mitigation of polysulfide shuttling. and the effect of Fe 3 O 4 in mesoporous carbon and Gr is highly pronounced at high C rates of 1C and 2C cycling performance. To further improve the cathodes at high rates, graphene nanoribbons (GNR) which can promote ion transport were incorporated in the cathode, resulting in 550 mAh/g at 5C/5C rates. Hybrid Li-ion/Li-S cathodes has also been explored to better engage unreacted polysulfides during charge/discharge. S/LFP hybrid cathodes offer higher sulfur utilization and enhanced rate capability, as well as higher areal loading. This study suggests inclusion of iron phosphide (Fe2P) which can chemically interact with polysulfides can further enhance sulfur utilization and mitigation of soluble polysulfides at high rates. Secondly, in the development of hybrid separators, we first employed graphene coating on the commercial polyolefin separators, which exhibits higher capability, better capacity retention and enhanced rate capability. To improve the rate capability with enhanced safety features such as thermal stability and nonflammability, we developed polymer/ceramic hybrids based on thermally stable polyimide (PI) and room temperature curable ceramic precursors such as organopolysilazane (OPSZ) or polysilsesquioxanes (PSSQ), which exhibit no shrinkages up to 300 ºC and non-flammability. To improve mechanical properties and electrochemical stability, polybenzimidazole (PBI) and alumina have been incorporated in polymer/ceramic hybrid separator, replacing PI and OPSZ/PSSQ, respectively. Finally, the gel ceramic electrolyte (GCE) based on ceramic cross linkers have been applied to make Li-S cells even safer and also to mitigate the polysulfide shuttling further. The resulting gel ceramic electrolyte offers improved capacity retention and rate capability, and also effectively mitigates polysulfide shuttling which was also confirmed by modeling. Inclusion of high ion conducting additives into GCE together with polymer/ceramic hybrid separators exhibit the higher ionic conductivity than liquid electrolyte with commercial polyolefin separator. We demonstrated that the developed highly loaded sulfur cathodes, polymer/ceramic hybrid separators and gel ceramic electrolyte can effectively mitigate the low rate capability, shuttling effect and limited cycle life in high performance Li-Sulfur batteries with improved safety.

25 ENERGY STORAGE↗
NASA NTRS2009

Tensile Properties and Microstructure of Inconel 718 Fabricated with Electron Beam Freeform Fabrication (EBF(sup 3))

Electron beam freeform fabrication (EBF3) direct metal deposition processing was used to fabricate two Inconel 718 single-bead-width wall builds and one multiple-bead-width block build. Specimens were machined to evaluate microstructure and room temperature tensile properties. The tensile strength and yield strength of the as-deposited material from the wall and block builds were greater than those for conventional Inconel 718 castings but were less than those for conventional cold-rolled sheet. Ductility levels for the EBF3 material were similar to those for conventionally-processed sheet and castings. An unexpected result was that the modulus of the EBF3-deposited Inconel 718 was significantly lower than that of the conventional material. This low modulus may be associated with a preferred crystallographic orientation resultant from the deposition and rapid solidification process. A heat treatment with a high solution treatment temperature resulted in a recrystallized microstructure and an increased modulus. However, the modulus was not increased to the level that is expected for Inconel 718.

Bird, R. Keith↗