THE MAGNETOSPHERE
The magnetosphere - density measurements, atmospheric drag, temperature
DENSITY MEASUREMENT↗
SEARCH · Engineering Papers
Results for “density measurement”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Experimental testing of four correction algorithms for the forward scattering spectrometer probe
Three number density correction algorithms and one size distribution correction algorithm for the Forward Scattering Spectrometer Probe (FSSP) were compared with data taken by the Phase Doppler Particle Analyzer (PDPA) and an optical number density measuring instrument (NDMI). Of the three number density correction algorithms, the one that compared best to the PDPA and NDMI data was the algorithm developed by Baumgardner, Strapp, and Dye (1985). The algorithm that corrects sizing errors in the FSSP that was developed by Lock and Hovenac (1989) was shown to be within 25 percent of the Phase Doppler measurements at number densities as high as 3000/cc.
Hovenac, Edward A.↗
Coordinated rocket and satellite measurements of an auroral event. II - The rocket observations and analysis
A rocket-borne payload launched into an aurora and a simultaneous overpass of the Atmosphere Explorer C satellite yielded measurements of auroral optical emission rates, thermal ion and electron densities, and low-energy electron fluxes. Model calculations of the thermospheric manifestation of the aurora were performed through use of rocket-determined auroral ionization rates and satellite-determined neutral gas densities. Measured oxygen densities provided a means of assessing the quenching rate of an excited state of N2. Energy transfer from this excited state appears to be the major source of 5577-A emission. Optical emission at 6300 A cannot be explained either by electron impact on atomic oxygen or by dissociative recombination of O2(+).
Sharp, W. E.↗
Dynamic Harris current sheet thickness from Cluster current density and plasma measurements
We use the first accurate measurements of current densities in the plasma sheet to calculate the half-thickness and position of the current sheet as a function of time. Our technique assumes a Harris current sheet model, which is parameterized by lobe magnetic field B(o), current sheet half-thickness h, and current sheet position z(sub o). Cluster measurements of magnetic field, current density, and plasma pressure are used to infer the three parameters as a function of time. We find that most long timescale (6-12 hours) current sheet crossings observed by Cluster cannot be described by a static Harris current sheet with a single set of parameters B(sub o), h, and z(sub o). Noting the presence of high-frequency fluctuations that appear to be superimposed on lower frequency variations, we average over running 6-min intervals and use the smoothed data to infer the parameters h(t) and z(sub o)(t), constrained by the pressure balance lobe magnetic field B(sub o)(t). Whereas this approach has been used in previous studies, the spatial gnuhen& now provided by the Cluster magnetometers were unavailable or not well constrained in earlier studies. We place the calculated hdf&cknessa in a magnetospheric context by examining the change in thickness with substorm phase for three case study events and 21 events in a superposed epoch analysis. We find that the inferred half-thickness in many cases reflects the nominal changes experienced by the plasma sheet during substorms (i.e., thinning during growth phase, thickening following substorm onset). We conclude with an analysis of the relative contribution of (Delta)B(sub z)/(Delta)X to the cross-tail current density during substorms. We find that (Delta)B(sub z)/(Delta)X can contribute a significant portion of the cross-tail c m n t around substorm onset.
Thompson, S. M.↗
A method for measuring temperatures and densities in hypersonic wind tunnel air flows using laser-induced O2 fluorescence
Laser-induced fluorescence in oxygen, in combination with Raman scattering, is shown to be an accurate means by which temperature, density, and their fluctuations due to turbulence can be measured in air flows associated with high-speed wind tunnels. For temperatures above 60 K and densities above 0.01 amagat, the uncertainty in the temperature and density measurements can be less than 2 and 3 percent, respectively, if the signal uncertainties are dominated by photon-statistical noise. The measurements are unaffected by collisional quenching and can be achieved with laser fluences for which nonlinear effects are insignificant. Temperature measurements using laser-induced fluorescence alone have been demonstrated at known densities in the range of low temperatures and densities which are expected in a hypersonic wind tunnel.
Laufer, Gabriel↗
Method for measuring temperatures and densities in hypersonic wind tunnel air flows using laser-induced O2 fluorescence
Laser-induced fluorescence in oxygen, in combination with Raman scattering, is shown to be an accurate means by which temperature, density, and their fluctuations owing to turbulence can be measured in air flows associated with high-speed wind tunnels. For temperatures above 60 K and densities above 0.01 amagat, the uncertainties in the temperature and density measurements can be less than 2 percent, if the signal uncertainties are dominated by photon statistical noise. The measurements are unaffected by collisional quenching and can be achieved with laser fluences for which nonlinear effects are insignificant. Temperature measurements using laser-induced fluorescence alone have been demonstrated at known densities in the range of low temperatures and densities which are expected in a hypersonic wind tunnel.
Laufer, Gabriel↗
Neutral thermosphere temperatures from density scale height measurements.
During each 4-min satellite interrogation period the Explorer 32 density gages measured the atmospheric density approximately every 2 sec. Over certain segments of the satellite orbit these measurements determined the neutral atmospheric density scale height. The scale heights measured at an altitude of 400 (plus or minus 50) km have been analyzed to infer thermospheric temperatures. The results confirm an earlier conclusion from the density data of the same experiment that the diurnal temperature variation is latitude dependent.
Newton, G. P.↗
Lunar atmospheric measurements
Maximum densities and gaseous contents of lunar atmosphere - use of optical or mass spectrometry for translunar, lunar orbit, transearth, and lunar surface phases of Apollo mission
GAS COMPOSITION↗
Radio propagation measurements using the explorer vi satellite
Electron density measurements above ionosphere using very high frequency and ultrahigh frequency radio signals from Explorer VI SATELLITE
ELECTRON DENSITY↗
One-dimensional mapping of femtosecond laser filaments using coherent microwave scattering
Here, this paper reports on the use of coherent microwave scattering (CMS) for spatially resolved electron number density measurements of elongated plasma structures induced at mid-IR femtosecond filamentation in air. The presented studies comprise one-dimensional mapping of laser filaments induced via 3.9 µm, 127.3 fs laser pulses at output energies up to 15 mJ. The axial electron number density was measured to be invariant (about 2 × 10 15 cm −3 ) along the entire filament length and for all tested laser pulse energies 5–15 mJ, and the corresponding laser intensity in the middle portion of the filament was estimated to be nearly constant for 5–15 mJ pulse energies (about 30−40 TW/cm 2 ). These findings support that intensity clamping conditions were achieved in the experiments. The proposed approach enables capabilities that are currently unavailable to perform absolute and longitudinally resolved measurements of electron number density in laser filaments and to precisely characterize conditions associated with self-focusing and intensity clamping.
plasma diagnostic techniques↗
Hemispheric differences in the morphology of the high latitude ionosphere measured at about 500 km
Ambient electron density measurements made by the radio frequency capacitance probe on Ariel 4 have been analyzed in order to study the structures present at about 500 km altitude at latitudes poleward of + or - 50 deg Lambda during the 1971 Northern Hemisphere winter (December solstice) and the 1972 Southern Hemisphere winter (June solstice); data obtained on 94 days centered on each solstice have been used. The general morphology of, and the extreme densities within, the midlatitude electron density trough, the polar cap depletions, and the electron density enhancements associated with the cusp-auroral zone were determined statistically. Analyses of data acquired during quiet magnetic conditions show that the Northern and Southern Hemisphere winter ionospheres were significantly different; in particular, the Southern Hemisphere densities were lower than those in the Northern Hemisphere. The maximum electron densities observed in the Northern Hemisphere occurred in a magnetic-local-time range symmetrical about the 02-14 MLT meridian, whereas in the Southern Hemisphere the maxima were symmetrical with respect to the midnight-noon magnetic meridian.
Tulunay, Y. K.↗
NSTAR Ion Thruster Plume Impact Assessments
Tests were performed to establish 30-cm ion thruster plume impacts, including plume characterizations via near and farfield ion current measurements, contamination, and sputtering assessments. Current density measurements show that 95% of the beam was enclosed within a 22 deg half-angle and that the thrust vector shifted by less than 0.3 deg during throttling from 2.3 to 0.5 kW. The beam flatness parameter was found to be 0.47, and the ratio of doubly charged to singly charged ion current density decreased from 15% at 2.3 kW to 5% at 0.5 kW. Quartz sample erosion measurements showed that the samples eroded at a rate of between 11 and 13 pm/khr at 25 deg from the thruster axis, and that the rate dropped by a factor of four at 40 deg. Good agreement was obtained between extrapolated current densities and those calculated from tantalum target erosion measurements. Quartz crystal microbalance and witness plate measurements showed that ion beam sputtering of the tank resulted in a facility material backflux rate of -10 A/hr in a large space simulation chamber.
Myers, Roger M.↗
Crustal evolution inferred from Apollo magnetic measurements
Magnetic field and solar wind plasma density measurements were analyzed to determine the scale size characteristics of remanent fields at the Apollo 12, 15, and 16 landing sites. Theoretical model calculations of the field-plasma interaction, involving diffusion of the remanent field into the solar plasma, were compared to the data. The information provided by all these experiments shows that remanent fields over most of the lunar surface are characterized by spatial variations as small as a few kilometers. Large regions (50 to 100 km) of the lunar crust were probably uniformly magnetized during early crustal evolution. Bombardment and subsequent gardening of the upper layers of these magnetized regions left randomly oriented, smaller scale (5 to 10 km) magnetic sources close to the surface. The larger scale size fields of magnitude approximately 0.1 gammas are measured by the orbiting subsatellite experiments and the small scale sized remanent fields of magnitude approximately 100 gammas are measured by the surface experiments.
Dyal, P.↗
Methanol and hydrogen sulfide in comet P/Halley
The Neutral Mass Spectrometer on the Giotto spacecraft measured the gas and ion composition in the coma of comet P/Halley. A detailed model of the ion chemistry inside the contact surface located at 4660 km is used to interpret the measured ion desnity profiles in the 32 to 35 amu/e mass range. The masses 33 and 35 amu/e are dominated by the protonated methanol and hydrogen sulfide ions CH3OH2(+) and H3S(+). Both profiles are essentially compatible with CH3OH and H2S originating from the nucleus only. The production rates relative to water are Y(CH3OH) = Q(CH3OH)/Q(H2O) = 1.7% and Y(H2S) = 0.41%. Our Y(CH3OH) agrees well with a determination from IR spectra obtained about 6 weeks after the Giotto encounter with P/Halley. In 7 other comets IR and microwave observations give Y(CH3OH) values between about 0.7 and 6%, indicating that the methanol abundance shows a strong variability from comet to comet. In three other comets Y(H2S) values between 0.2 and 0.5% have been reported. In addition to H2S(+), only ions containing minor isotopes of H, C, O and S contribute to mass 34 amu/e (e.g. (34)S(+), (13)CH3OH2(+), CH4DO(+)). These contributions can be calculated from the measured densities of the ions containing the major isotopes and the H2S(+) contribution from the measured H3S(+) density. From mass 34 amu/e we can also derive an upper limit of 1% for the abundance of deuterated methanol. This limit is at most marginally compatible with a direct interstellar origin of the CH3OH in P/Halley as the measured interstellar abundance of deuterated methanol is 1 to 6%.
Eberhardt, P.↗
Validation of ISS Floating Potential Measurement Unit Electron Densities and Temperatures
Validation of the Floating Potential Measurement Unit (FPMU) electron density and temperature measurements is an important step in the process of evaluating International Space Station spacecraft charging issues .including vehicle arcing and hazards to crew during extravehicular activities. The highest potentials observed on Space Station are due to the combined VxB effects on a large spacecraft and the collection of ionospheric electron and ion currents by the 160 V US solar array modules. Ionospheric electron environments are needed for input to the ISS spacecraft charging models used to predict the severity and frequency of occurrence of ISS charging hazards. Validation of these charging models requires comparing their predictions with measured FPMU values. Of course, the FPMU measurements themselves must also be validated independently for use in manned flight safety work. This presentation compares electron density and temperatures derived from the FPMU Langmuir probes and Plasma Impedance Probe against the independent density and temperature measurements from ultraviolet imagers, ground based incoherent scatter radar, and ionosonde sites.
Coffey, Victoria N.↗
High-resolution electron microscope observation of voids in amorphous Ge.
Electron micrographs have been obtained which clearly show the existence of a void network in amorphous Ge films formed at substrate temperatures of 25 and 150 C, and the absence of a void network in films formed at higher substrate temperatures of 200 and 250 C. These results correlate quite well with density measurements and predictions of void densities by indirect methods.
Donovan, T. M.↗
Quantification of vapor screen analysis
The traditionally qualitative method of vapor screening is applied to the task of gathering quantitative density measurements in supersonic flows. Quantitative density information for flow around a two-dimensional biconvex airfoil at Mach 2.8 is extracted from digitized images of vapor screens by assuming a linear relation between particle density and scattering intensity. Intensity readings are calibrated through known conditions in the free stream and at the airfoil bow shock. The experimental results are compared to densities generated by a Euler code and determined to have errors of less than ten percent.
Benedict, Lance H.↗
Atomic Oxygen Erosion Yield Prediction for Spacecraft Polymers in Low Earth Orbit
The ability to predict the atomic oxygen erosion yield of polymers based on their chemistry and physical properties has been only partially successful because of a lack of reliable low Earth orbit (LEO) erosion yield data. Unfortunately, many of the early experiments did not utilize dehydrated mass loss measurements for erosion yield determination, and the resulting mass loss due to atomic oxygen exposure may have been compromised because samples were often not in consistent states of dehydration during the pre-flight and post-flight mass measurements. This is a particular problem for short duration mission exposures or low erosion yield materials. However, as a result of the retrieval of the Polymer Erosion and Contamination Experiment (PEACE) flown as part of the Materials International Space Station Experiment 2 (MISSE 2), the erosion yields of 38 polymers and pyrolytic graphite were accurately measured. The experiment was exposed to the LEO environment for 3.95 years from August 16, 2001 to July 30, 2005 and was successfully retrieved during a space walk on July 30, 2005 during Discovery s STS-114 Return to Flight mission. The 40 different materials tested (including Kapton H fluence witness samples) were selected specifically to represent a variety of polymers used in space as well as a wide variety of polymer chemical structures. The MISSE 2 PEACE Polymers experiment used carefully dehydrated mass measurements, as well as accurate density measurements to obtain accurate erosion yield data for high-fluence (8.43 1021 atoms/sq cm). The resulting data was used to develop an erosion yield predictive tool with a correlation coefficient of 0.895 and uncertainty of +/-6.3 10(exp -25)cu cm/atom. The predictive tool utilizes the chemical structures and physical properties of polymers to predict in-space atomic oxygen erosion yields. A predictive tool concept (September 2009 version) is presented which represents an improvement over an earlier (December 2008) version.
Banks, Bruce A.↗