SEARCH · Engineering Papers

Results for “coupling method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

All sources NASA NTRS DOE OSTI

NASA NTRS1986

Theoretical study of the X 2Pi and A 2Sigma(+) states of CuO and CuS

Theoretical spectroscopic constants and dipole moments are determined for the X 2Pi and A 2Sigma(+) states of CuO and CuS, using extended Gaussian basis sets and incorporating correlation using both configuration interaction (CI) and coupled pair (CPF) methods. Relativistic corrections (Darwin plus mass velocity), included using first-order perturbation theory, are found to be relatively small. At the CPF level, significant configuration mixing with the 3d(9)4s(1) occupation occurs for both states, resulting in some bond shortening and a significant increase in the dissociation energy. The best spectroscopic parameters are in excellent agreement with experiment for both CuO and CuS. In analogy with CuO, CuS is predicted to have a yet unobserved 2Sigma(+) state near 10,000 per cm.

Langhoff, S. R.↗

NASA NTRS1986

Theoretical study of the low-lying electronic states of ZnO and ZnS

Theoretical spectroscopic constants and dipole moments are determined for the 1 Sigma(+), 1,3 Pi, and 3 Sigma(+) states of ZnO and ZnS, using extended Gaussian basis sets and incorporating correlation using both configuration-interaction and coupled pair (CPF) methods. Relativistic corrections (Darwin plus mass velocity), included using first-order perturbation theory, are relatively small. At the CPF level, both ZnO and ZnS have 1 Sigma(+) ground states, with the 3 Pi state lying 209 and 2075/cm higher, respectively. The 3 Sigma(+) state lies about 1.5 eV higher in ZnO and 2.1 eV higher in ZnS. The 1,3 Pi states are relatively close together since the exchange splitting is small with the sigma electron localized on Zn and the pi electron on oxygen (or sulfur).

Bauschlicher, C. W., Jr.↗

NASA NTRS1987

Full CI benchmark calculations on CH3

Full CI calculations have been performed on the CH3 radical. The full CI results are compared to those obtained using CASSCF/multireference CI and coupled-pair functional methods, both at the equilibrium CH distance and at geometries with the three CH bonds extended. In general, the performance of the approximate methods is similar to that observed in calculations on other molecules in which one or two bonds were stretched.

Bauschlicher, Charles W., Jr.↗

NASA NTRS1987

Mixed Cu-simple metal dimers and trimers - CuLi, CuLi2, CuNa, CuK, CuBe, CuBe2, Cu2Be, CuAl, and CuAl2

Theoretical studies of selected diatomic and triatomic molecules containing copper and the simple metals Li, Na, K, Be, and Al are presented, with emphasis on elucidating the nature of the bonding in mixed transition metal-simple metal systems. Large Gaussian basis sets are used in the diatomic calculations, and are used to calibrate the triatomic calculations, in which somewhat smaller Gaussian basis sets are employed. Electron correlation is incorporated using both the single-reference singles plus doubles configuration interaction and coupled pair functional methods. It is found that alkali atoms form very polar sigma bonds with copper, and that the ionicity increases with the inclusion of higher excitations because they improve the electron affinity of copper, which in turn allows a larger negative charge on copper. Aluminum is found to form stronger bonds than beryllium, since it does not have to undergo sp hybridization. Some of the trimers bond by forming three-center three-electron bonds. These multicenter bonds are quite strong even when compared to the two-electron bonds in the dimers or to other bonding mechanisms in the trimers.

Bauschlicher, Charles W., Jr.↗

NASA NTRS1988

Comparison of methods for the calculation of thermal contact resistance of the first Brazilian satellite

A comparative study of the methods developed for the calculation of thermal contact resistance between two surfaces submitted to a perpendicular heat flux is presented. Several factors affecting this resistance are analyzed and a brief historical review of the works in this field is made, spotting the methods of interest for space applications. These are compared to experimental data so as to establish the most proper method for the couplings of the first Brazilian satellite.

Mantelli, Marcia B. H.↗

NASA NTRS1988

Adaptive mesh generation for viscous flows using Delaunay triangulation

A method for generating an unstructured triangular mesh in two dimensions, suitable for computing high Reynolds number flows over arbitrary configurations is presented. The method is based on a Delaunay triangulation, which is performed in a locally stretched space, in order to obtain very high aspect ratio triangles in the boundary layer and the wake regions. It is shown how the method can be coupled with an unstructured Navier-Stokes solver to produce a solution adaptive mesh generation procedure for viscous flows.

Mavriplis, Dimitri J.↗

NASA NTRS1988

Theoretical study of the scandium and yttrium halides

The X1Sigma(+) ground states and a3Delta excited states of the diatomic halides of Sc and Y are characterized theoretically, using the SDCI coupled-pair functional method and the state-averaged CASSCF method to determine the spectroscopic constants and related properties. The techniques employed are discussed, and the results are presented in extensive tables. The dissociation energies are given as D0 = 6.00 eV for ScF, 4.55 eV for ScCl, 3.90 eV for ScBr, 6.72 eV for YF, 5.36 eV for YCl, and 4.74 eV for YBr.

Langhoff, Stephen R.↗

NASA NTRS1989

Theoretical spectroscopic constants for the low-lying states of the oxides and sulfides of Mo and Tc

Spectroscopic results were determined for the ground and low-lying states of the oxides and sulfides of Mo and Tc, using the single-reference-based modified coupled pair functional method of Ahlrichs et al. (1985) and Chong et al. (1986) and the multireference-based state-averaged CASSCF/MRCI method. Spectroscopic constants, dipole moments, Mulliken populations, and radiative lifetimes were calculated for selected low-lying states of these molecular systems. The spectroscopy of the MoS and TcS molecules was found to be quite analogous to the corresponding oxides.

Langhoff, Stephen R.↗

NASA NTRS1989

Theoretical study of the dipole moment function of OH(X2Pi)

A theoretical study of the sensitivity of the dipole moment function (DMF) of the X2Pi ground state of OH to basis-set saturation and to refinements in the correlation treatment is presented. Emphasis is placed on determining the slope of the DMF at r(e) and the r value at which the maximum occurs. Consideration is given to the effect of oxygen polarization functions up through h type, expansion of the active orbital space to include the O 3d-delta orbital, the effect of higher excitations using the averaged coupled-pair functional method, and the effect of evaluating the dipole moment as an energy derivative rather than as an expectation value. The theoretical DMFs obtained here, which should be the most accurate to date, differ markedly from an empirical DMF of Turnbull and Lowe that is based on experimentally derived intensity ratios. The theoretical DMFs agree better with a recently published DMF of Nelson et al., but suggest that this empirical DMF is also inaccurate for r greater than 2.3 a0.

Langhoff, Stephen R.↗

NASA NTRS1988

Adaptive mesh generation for viscous flows using Delaunay triangulation

Mavriplis, Dimitri J.↗

NASA NTRS1990

Vibrational frequencies for Be3 and Be4

The harmonic frequencies of Be3 and Be4, evaluated by multireference configuration-interaction (MRCI) and singles and doubles coupled-cluster (CCSD) methods, are reported, as are IR intensities evaluated by using the double harmonic approximation. A comparison of the results shows that the CCSD method augmented with a correction for connected triple excitations, CCSD(T), can be a viable alternative to MRCI for determining the ground-state properties of small Be clusters (other than the dimer). Results of normal mode analyses indicate that the anharmonic vibrational frequencies of Be3 and Be4 are reasonably consistent at the CCSD, CCSD(T), or MRCI levels of treatment.

Rendell, Alistair P.↗

NASA NTRS1990

The vibrational frequencies of ozone

The singles and doubles coupled-cluster (CCSD) method is used, together with the recently proposed CCSD(T) and CCSDT-1 methods, to determine the equilibrium structure and harmonic frequencies of ozone at various levels, on the basis of large one-particle basis sets. It is demonstrated that f-type functions are required in order to obtain quantitative accuracy for the equilibrium structure and harmonic frequencies. The CCSD(T) level of theory, in conjunction with a (4s 3p 2d 1f) atomic natural orbital set, yields an equilibrium geometry and harmonic frequencies that are in excellent agreement with experimental results; an effort has accordingly been made to determine the cubic and quartic force constants, and evaluate the anharmonic corrections to the fundamental vibrational frequencies.

Lee, Timothy J.↗

NASA NTRS1990

Adaptive mesh generation for viscous flows using Delaunay triangulation

Mavriplis, Dimitri J.↗

NASA NTRS1990

Modeling the dust size distribution in comets with dust fragmentation

A hydrodynamic model was developed of a spherically symmetric dusty gas flow in a cometary atmosphere assuming a single fluid, inviscid, perfect gas. The hydrodynamics for gas and dust, which involves the gas drag force (momentum transfer), heat exchange between gas and dust, photodissociation energy for H2O gas, and radiative heating and cooling terms for dust particles, are solved using the Gear method for stiff, coupled differential equations. Calculations were done with a dust size distribution for radii alpha = 0.01 micron to 10 cm with densities variable with the size. A nucleus size of 4.0 km radius with a density of 0.5 g/cu cm and a total dust-to-gas mass ratio chi = 1 was adopted. There are indications from in situ observations that dust particle fragment into smaller ones. Fragmentation of dust particles was incorporated into the model. This is done by adding source and sink terms in the continuity equations for the dust. Lifetimes for the decay of dust particles were assumed as a function of particle size. It is also assumed that dust particles always fragment only into the next smaller size.

Konno, Ichishiro↗

NASA NTRS1991

Theoretical study of the hyperfine parameters of OH

In the present study of the hyperfine parameters of O-17H as a function of the one- and n-particle spaces, all of the parameters except oxygen's spin density, b sub F(O), are sufficiently easily tractable to allow concentration on the computational requirements for accurate determination of b sub F(O). Full configuration-interaction (FCI) calculations in six Gaussian basis sets yield unambiguous results for (1) the effect of uncontracting the O s and p basis sets; (2) that of adding diffuse s and p functions; and (3) that of adding polarization functions to O. The size-extensive modified coupled-pair functional method yields b sub F values which are in fair agreement with FCI results.

Chong, Delano P.↗

NASA NTRS1990

Propagation characteristics of optical fiber structures with arbitrary shape and index variation

The application of the scalar wave-fast Fourier transform (SW-FFT) technique to the computation of the propagation characteristics of some complex optical fiber structures is presented. The SW-FFT technique is based on the numerical solution of the scalar wave equation by a forward-marching fast Fourier transform method. This solution yields the spatial configuration of the fields as well as its modal characteristics in and around the guiding structure. The following are treated by the SW-FFT method: analysis of coupled optical fibers and computation of their odd and even modes and coupling length; the solution of tapered optical waveguides (transitions) and the study of the effect of the slope of the taper on mode conversion; and the analysis of branching optical fibers and demonstration of their mode-filtering and/or power-dividing properties.

Manshadi, F.↗

NASA NTRS1992

Theoretical study of the bond dissociation energies of methanol

A theoretical study of the bond dissociation energies for H2O and CH3OH is presented. The C-H and O-H bond energies are computed accurately with the modified coupled-pair functional method using a large basis set. For these bonds, an accuracy of +/- 2 kcal/mol is achieved, which is consistent with the C-H and C-C single bond energies of other molecules. The C-O bond is much more difficult to compute accurately because it requires higher levels of correlation treatment and more extensive one-particle basis sets.

Bauschlicher, Charles W., Jr.↗

NASA NTRS1992

Theoretical study of the bond dissociation energies of propyne (C3H4)

The C-C and C-H bond dissociation energies (BDEs) of propyne have been computed using the modified coupled-pair functional method. Due to hyperconjugation, the C-C and methyl C-H single bonds are stronger and weaker, respectively than those in ethane. The acetylenic C-H and C triple bond C BDEs are larger and smaller, respectively, than in acetylene, also as a result of the hyperconjugation. Our best estimate of 92.5 +/- 2 kcal/mol for the methyl C-H BDE in propyne is slightly larger than the experimental value. For the acetylenic C-H BDE in propyne we predict 135.9 +/- 2 kcal/mol.

Bauschlicher, Charles W., Jr.↗