Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “core formation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

The nature of cometary materials

Because cometary surfaces are likely to be far colder and of a different composition than planetary surfaces, there are some new considerations that must be examined in regards to placing instrumented packages or sample return devices on their surfaces. The qualitative analysis of the problem of attaching hardware to a comet and not being ejected back into space can be divided into two parts. The first problem is to pierce the mantle and obtain access to the icy core. Drilling through the mantle requires that the drilling forces be reacted. Reacting such forces probably requires attachment to the icy core below. Therefore, some kinetic impact piercing device is likely to be required as the first act of attachment. The second problem for a piercing device to overcome is the force produced by the impact kinetic energy that tries to eject the piercing device back into space. The mantle and icy core can absorb some of the impact kinetic energy in the form of fracture formation and friction energy. The energy that is not absorbed in these two ways is stored by the core as elastic deformation of the mantle and icy core. It is concluded that because the cometary materials are almost certainly brittle and the icy core is likely to be self lubricating, the elastic rebound and gas pressure expulsion forces must be counteracted by forces greater than those that may be provided by a piercing device or its capture devices (barbs).

Stephens, James↗
NASA NTRS1992

Global star formation in the L1630 molecular cloud

The first systematic and coordinated surveys for both dense gas and young stellar objects within a single molecular cloud, the L1630 molecular cloud are compared. It is found that (1) star formation in the L1630 molecular cloud occurs almost exclusively within the dense gas; (2) star formation does not occur uniformly throughout the dense gas and is strongly favored in a few very massive dense cores, where efficient conversion of molecular gas into stars has resulted in the production of rich stellar clusters; and (3) high gas densities and high gas mass may be necessary but not sufficient conditions for the formation of star clusters since two of the five most massive dense cores in the cloud have very low levels of star formation activity.

Lada, Elizabeth A.↗
NASA NTRS1972

Seismic investigations - The Viking Mars Lander.

A lightweight three-component short period seismometer has been developed for preliminary seismic investigations of Mars. Because of weight and data-rate constraints the Viking seismic experiment is far from optimal but it should, at a minimum, provide information about the microseismic level and an upper bound on the seismicity of the planet. If Mars is tectonically active a start can be made on the problem of the internal structure, dynamics, and composition of the planet. A good distribution of modest sized Marsquakes will make it possible to determine if Mars has a core. The size of the core is related to the conditions of planetary formation.

Anderson, D. L.↗
NASA NTRS1975

Observations and theory of Mg II lines in early type stars. II - Theory and predicted profiles. III - The observations and a comparison with the predictions

Profiles of the UV Mg II lines in the spectra of early type stars are computed in a grid of model atmospheres with effective temperatures between 8000 and 35,000 K and log g values of 2.5 to 4.0 using the LTE and non-LTE theories of line formation. The theoretical results indicate that the line cores are strengthened by non-LTE effects over the entire temperature range, resonance-line wings are weaker in the cooler models than in the LTE case, and very large deviations from LTE occur in the hot low-gravity models. These predictions are compared with the equivalent widths of the UV Mg II lines in 106 stars and of the visual lines in 48 stars (spectral types O4 to A3). The observed equivalent widths of normal stars in luminosity classes II through V are found to agree with the predictions over the entire range from O8 to A2 if a certain Mg/H abundance is adopted. The line intensities observed in supergiants, Be, Bp, and Ap stars are discussed.

Snijders, M. A. J.↗
NASA NTRS1989

The physics and chemistry of the L134N molecular core

The dark cloud L134N is studied in detail via millimeter- and centimeter-wavelength emission-line spectra. A high-density core of molecular gas exists in L134N which has a kinetic temperature of about 12 K, a peak molecular hydrogen density of about 10 exp 4.5/cu cm, and a mass of about 23 solar. The core may be the site of future star formation. Maps of emission from (C-18)O, CS, H(C-13)O(+), SO, NH3, and C3H2 reveal morphologically different distributions resulting in part from both varying physical conditions within the cloud and optical depth effects. Significant differences also exist which are probably due to chemical abundance variations. A consistent set of LTE chemical abundances has been estimated at as many as seven positions, which can be used to constrain chemical models of dark clouds.

Swade, Daryl A.↗
NASA NTRS1993

Measurements in the near-field of a turbulent wingtip vortex

The roll-up of a wingtip vortex, at Reynold's number based on chord of 4.6 million, was examined with emphasis on suction side and near wake measurements. Surface oil flow and laser smoke flow studies are performed, demonstrating the highly 3D nature of the flow around the wingtip, the formation of the feeding sheet, and the viscous core region of the vortex. Flow visualization and correlation measurements show that meandering of the vortex is small and does not appreciably contribute to the turbulence measurements.

Chow, Jim S.↗
NASA NTRS1993

When clusters collide - A numerical Hydro/N-body simulation of merging galaxy clusters

A 3D numerical simulation of two merging clusters of galaxies, using a hybrid Hydro/N-body code, is presented. The hydrodynamics of the code is solved by an Eulerian finite difference method. Initial results disclose that the X-ray emission of the dominant cluster becomes elongated and broadened; heating occurs at the core of the dominant cluster as a result of multiple shocks, and high velocity gas motions within the intracluster medium. It is predicted that clusters which have undergone recent mergers and do not have cooling flows will have high peculiar gas velocities and that the shocks and turbulence generated during the merger may power cluster-wide radio halos. Prolonged high-velocity gas motions through the dominant cluster core possibly play a major role in the formation and shaping of wide-angle tailed radio sources associated with central dominant galaxies. The N-body component of the simulation reveals the subcluster to be dispersed as it passes through the dominant cluster.

Roettiger, Kurt↗
NASA NTRS2005

Data Format Standardization of Space Weather Model Output at the Community Coordinated Modeling Center

The disparate nature of space weather model output provides many challenges with regards to the portability and reuse of not only the data itself, but also any tools that are developed for analysis and visualization. We are developing and implementing a comprehensive data format standardization methodology that allows heterogeneous model output data to be stored uniformly in any common science data format. We will discuss our approach to identifying core meta-data elements that can be used to supplement raw model output data, thus creating self-descriptive files. The meta-data should also contain information describing the simulation grid. This will ultimately assists in the development of efficient data access tools capable of extracting data at any given point and time. We will also discuss our experiences standardizing the output of two global magnetospheric models, and how we plan to apply similar procedures when standardizing the output of the solar, heliospheric, and ionospheric models that are also currently hosted at the Community Coordinated Modeling Center.

Maddox, M.↗
NASA NTRS2005

Simulations of inducers at Low-Flow Off-Design Conditions

The ability to accurately model details of inlet back flow for inducers operating at low-flow, off-design conditions is evaluated. A sub-scale version of a three- bladed liquid hydrogen inducer tested in water with detailed velocity and pressure measurements is used as a numerical test bed. Under low-flow, off-design conditions the length of the separation zone as well as the swirl velocity magnitude was under predicted with a standard k-E model. When the turbulent viscosity coefficient was reduced good comparison was obtained at all the flow conditions examined with both the magnitude and shape of the profile matching well with the experimental data taken half a diameter upstream of the leading edge. The velocity profiles and incidence angles at the leading edge itself were less sensitive to the back flow length predictions indicating that single-phase performance predictions may be well predicted even if the details of flow separation modeled are incorrect. However, for cavitating flow situations the prediction of the correct swirl in the back flow and the pressure depression in the core becomes critical since it leads to vapor formation. The simulations have been performed using the CRUNCH CFD@ code that has a generalized multi-element unstructured framework and an advanced multi-phase formulation for cryogenic fluids. The framework has been validated rigorously for predictions of temperature and pressure depression in cryogenic fluid cavities and has also been shown to predict the cavitation breakdown point for inducers at design conditions.

Hosangadi, Ashvin↗
NASA NTRS2005

Simulations of a Liquid Hydrogen Inducer at Low-Flow Off-Design Flow Conditions

The ability to accurately model details of inlet back flow for inducers operating a t low-flow, off-design conditions is evaluated. A sub-scale version of a three-bladed liquid hydrogen inducer tested in water with detailed velocity and pressure measurements is used as a numerical test bed. Under low-flow, off-design conditions the length of the separation zone as well as the swirl velocity magnitude was under predicted with a standard k-E model. When the turbulent viscosity coefficient was reduced good comparison was obtained a t all the flow conditions examined with both the magnitude and shape of the profile matching well with the experimental data taken half a diameter upstream of the leading edge. The velocity profiles and incidence angles a t the leading edge itself were less sensitive to the back flow length predictions indicating that single-phase performance predictions may be well predicted even if the details of flow separation modeled are incorrect. However, for cavitating flow situations the prediction of the correct swirl in the back flow and the pressure depression in the core becomes critical since it leads to vapor formation. The simulations have been performed using the CRUNCH CFD(Registered Trademark) code that has a generalized multi-element unstructured framework and a n advanced multi-phase formulation for cryogenic fluids. The framework has been validated rigorously for predictions of temperature and pressure depression in cryogenic fluid cavities and has also been shown to predict the cavitation breakdown point for inducers a t design conditions.

Hosangadi, A.↗
NASA NTRS1984

A unified N-body and statistical treatment of stellar dynamics. I - The hybrid code. II - Applications to globular cluster cores

A unified N-body and statistical treatment of stellar dynamics is developed and applied to the late stages of core collapse and early stages of post collapse evolution in globular clusters. A 'hybrid' computer code is joined to a direct N-body code which is used to calculate exactly the behavior of particles in the inner spatial region, and the combination is used to follow particles statistically in the outer spatial region. A transition zone allows the exchange of particles and energy between the two regions. The main application results include: formation of a hard central binary system, reversal of core collapse and expansion due to the heat input from this binary, ejection of the binary from the core, and recollapse of the core; density profiles that form a one-parameter sequence during the core oscillations; and indications that these oscillations will eventually cease.

Mcmillan, S. L. W.↗
NASA NTRS1973

Neutron-star formation in the carbon-detonation supernova.

Neutrino losses, such as those driven by the convective Urca process, may affect the evolution of stars in the mass range from 4 to 8 solar masses so as to lead to collapse of their degenerate carbon/oxygen cores. A corresponding hydrodynamic model is computed which leads to the formation of a 1.3 to 1.4 solar mass neutron star with the expulsion of a small fraction of the mass, about 0.l solar mass at about 20,000 km/sec into the overlying hydrogen envelope. This sets the stage for the Ostriker-Gunn mechanism in which Type II supernovae and pulsars are formed.

Wheeler, J. C.↗
NASA NTRS1978

The nature of rays and sources of highland material in Mare Crisium

Although highland fragments are rare in the Luna 24 core, they should provide an important source of information on the sequence of formation and lithology of lunar east-limb basins. The numerous rays that cross the Crisium basin suggest several sources of highland materials. Both deposition of primary ejecta and reworking of local material were most likely responsible for the formation of ray systems in Mare Crisium. In addition to the fact that Luna 24 landed near the uprange end of a Giordano Bruno ray, incomplete sampling of the uppermost layer and formation of the ray by reworking of in situ regolith suggest that its materials may be scarce or not present in the core. Highland fragments present are most likely to be representative of several highland sources.

Maxwell, T. A.↗
NASA NTRS2005

Measuring the Internal Structure and Physical Conditions in Star and Planet Forming Clouds Core: Toward a Quantitative Description of Cloud Evolution

This grant funds a research program to use infrared extinction measurements to probe the detailed structure of dark molecular cloud cores and investigate the physical conditions which give rise to star and planet formation. The goals of this program are to acquire, reduce and analyze deep infrared and molecular-line observations of a carefully selected sample of nearby dark clouds in order to internal structure of starless cloud cores and to quantitatively investigate the evolution of such structure through the star and planet formation process. During the second year of this grant, progress toward these goals is discussed.

Lada, Charles J.↗
NASA NTRS2005

IRAS 16293-2422: Evidence for Infall onto a Counter-Rotating Protostellar Accretion Disk

We report high spatial resolution VLA observations of the low-mass star-forming region IRAS 16293-2422 using four molecular probes: ethyl cyanide (CH3CH2CN)) methyl formate (CH3OCHO), formic acid (HCOOH), and the ground vibrational state of silicon monoxide (SiO). Ethyl cyanide emission has a spatial scale of approx. 20" and encompasses binary cores A and B as determined by continuum emission peaks. Surrounded by formic acid emission, methyl formate emission has a spatial scale of approx. 6" and is confined to core B. SiO emission shows two velocity components with spatial scales less than 2" that map approx. 2" northeast of the A and B symmetry axis. The redshifted SiO is approx. 2" northwest of blueshifted SiO along a position angle of approx. 135deg which is approximately parallel to the A and B symmetry axis. We interpret the spatial position offset in red and blueshifted SiO emission as due to rotation of a protostellar accretion disk and we derive approx. 1.4 Solar Mass, interior to the SiO emission. In the same vicinity, Mundy et al. (1986) also concluded rotation of a nearly edge-on disk from OVRO observations of much stronger and ubiquitous CO-13 emission but the direction of rotation is opposite to the SiO emission findings. Taken together, SiO and CO-13 data suggest evidence for a counter-rotating disk. Moreover, archival BIMA array CO-12C data show an inverse P Cygni profile with the strongest absorption in close proximity to the SiO emission, indicating unambiguous material infall toward the counter-rotating protostellar disk at a new source location within the IRAS 16293-2422 complex. The details of these observations and our interpretations are discussed.

Remijan, Anthony J.↗
NASA NTRS1993

Genesis of a planet in Messier 4

The anomalous spin period second derivative of the binary millisecond pulsar PSR 1620-26 in the globular cluster M4 is best explained by a sub-Jovian mass planet in a moderately eccentric about 7 AU orbit about the pulsar binary. We consider formation scenarios for PSR 1620-26. A planet scavenged from a single main-sequence star during an exchange encounter naturally produces systems such as PSR 1620-26. The position of the pulsar just outside the core of M4 is shown to fit naturally with the preferred formation scenario and permit a planet to have survived in the inferred orbit about the binary. It is possible that the orbital eccentricity of the binary was induced by the planet. A confirmation of a planet in eccentric orbit about PSR 1620-26 would strongly suggest that planets form ubiquitously around low-mass main-sequence stars, even stars of low metallicity.

Sigurdsson, Steinn↗
NASA NTRS1989

Fabrication and evaluation of enhanced diffusion bonded titanium honeycomb core sandwich panels with titanium aluminide face sheets

A joining process was developed for fabricating lightweight, high temperature sandwich panels for aerospace applications using Ti-14Al-21Nb face sheets and Ti-3Al-2.5V honeycomb core. The process, termed Enhanced Diffusion Bonding (EDB), relies on the formation of a eutectic liquid through solid-state diffusion at elevated temperatures and isothermal solidification to produce joints in thin-gage titanium and titanium aluminide structural components. A technique employing a maskant on the honeycomb core was developed which permitted electroplating a controlled amount of EDB material only on the edges of the honeycomb core in order to minimize the structural weight and metallurgical interaction effects. Metallurgical analyses were conducted to determine the interaction effects between the EDB materials and the constituents of the sandwich structure following EDB processing. The initial mechanical evaluation was conducted with butt joint specimens tested at temperatures from 1400 - 1700 F. Further mechanical evaluation was conducted with EDB sandwich specimens using flatwise tension tests at temperatures from 70 - 1100 F and edgewise compression tests at ambient temperature.

Hoffmann, E. K.↗