SEARCH · Engineering Papers

Results for “convergence rate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Automating Bayesian inference and design to quantify acoustic particle levitation

Self-propulsion of micro- and nanoparticles powered by ultrasound provides an attractive strategy for the remote manipulation of colloidal matter using biocompatible energy inputs. Quantitative understanding of particle motion and its dependence on size, shape, and composition requires accurate characterization of the acoustic field, which depends sensitively on the experimental setup. Here, we show how automated experiments based on Bayesian inference and design can accurately and efficiently characterize the acoustic field within resonant chambers used to propel acoustic nanomotors. Repeated cycles of observation, inference, and design (OID) are guided by a physical model that describes the rate at which levitating particles approach the nodal plane. Using video microscopy, we observe the relaxation of tracer particles to this plane following the application of the acoustic field. We use sequential Monte Carlo methods to infer model parameters such as the amplitude and frequency of the resonant chamber while accounting for particle-level measurement noise and population-level heterogeneity in the field. Guided by simulated outcomes, we select the optimal design for the next experiment as to maximize the information gain in the relevant parameters. We show how this iterative process serves to discriminate between competing hypotheses and efficiently converges to accurate parameter estimates using only few automated experiments. We discuss the need for model criticism to ensure the validity of the guiding model throughout automated cycles of observation, inference, and design. Furthermore, this work demonstrates how Bayesian methods can learn the parameters of nonlinear, hierarchical models used to describe video microscopy data of active colloids.

42 ENGINEERING↗

DOE OSTI2024

NUMERICAL MODELING OF A SOLID OXIDE FUEL CELL FOR USE IN REAL-TIME SIMULATION AND CYBER-PHYSICAL SYSTEMS

Cyber-physical systems provide a mechanism with which to investigate the physical phenomena and behavior of traditionally cost-prohibitive or otherwise fragile equipment. For the National Energy Technology Laboratory (NETL), this approach resulted in the Hybrid Performance (Hyper) facility which features a gas turbine-SOFC hybrid cycle utilizing real turbomachinery and a simulated SOFC stack. This allows for the investigation of combined cycle performance and control strategies, in an exhaustive manner, both without fear of destroying delicate state-of-the-art fuel cells, and with the full accuracy of real-world turbomachinery. Issues arose between the transient response of the SOFC model being limited to a sample time of 80 milliseconds, due to the calculation time of the SOFC model taking on average 40 milliseconds to calculate for a given timestep with spikes in calculation time reaching the 80 millisecond threshold. In order to be able to match the speed of transients from the turbomachinery and likewise better discern transient behavior, it was determined that the SOFC model must be optimized to operate at a sample time of 5 milliseconds. Therefore, it is necessary to optimize the SOFC model in order to decrease the calculation time from around 40 milliseconds, down to at the most 5 milliseconds. To do this, both the electrochemical algorithm and the thermal algorithm used to simulate the physical behavior of the SOFC are investigated to determine where improvements can be made. To this end the rootfinding numerical recipes of the electrochemical algorithm are investigated as the complex electrochemistry requires a highly iterative nested dual convergence loop to resolve the voltage-current relationship, and likewise the temporal discretization of the thermal algorithm is modified for the sake of higher accuracy and stability. Ultimately the new electrochemical algorithm featuring higher order rootfinding schemes proves to be efficient enough to reach the sub 5 millisecond target, signifying an order of magnitude reduction in calculation time, and when coupled with the new temporal discretization similar calculation time characteristics show that a fully implicit, higher order temporal discretization can also successfully be used if desired. Ultimately this result means that the cyber-physical simulation system can operate at higher sample rates, and resolve transient events at significantly higher resolution and fidelity.

Arias, Jesus↗

DOE OSTI2022

Characteristic momentum of Hydro + and a bound on the enhancement of the speed of sound near the QCD critical point

Near the critical point in the QCD phase diagram, hydrodynamics breaks down at a momentum where the frequency of the fastest hydrodynamic mode becomes comparable with the decay rate of the slowest nonhydrodynamic mode. Hydro+ was developed as a framework which extends the range of validity of hydrodynamics beyond that momentum value. This was achieved through coupling the hydrodynamic modes to the slowest nonhydrodynamic mode. In this work, analyzing the spectrum of linear perturbations in Hydro+, we find that a slow mode falls out of equilibrium if its momentum is greater than a characteristic momentum value. That characteristic momentum turns out to be set by the branch points of the dispersion relations. These branch points occur at the critical momenta of so-called spectral curves and are related to the radius of convergence of the derivative expansion. The existence of such a characteristic momentum scale suggests that a particular class of slow modes has no remarkable effect on the flow of the plasma. Based on these results, we show that there is an enhancement of the speed of sound due to the Hydro+ corrections compared to the known thermodynamic corrections near the critical point. This enhancement can not exceed a temperature-dependent upper bound which we derive near the critical point in the QCD phase diagram.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2022

The MaNGA firefly Value-Added-Catalogue: resolved stellar populations of 10,010 nearby galaxies

We present the Mapping Nearby Galaxies at Apache Point Observatory survey (MaNGA) FIREFLY Value Added Catalogue (VAC) – a catalogue of ~3.7 million spatially resolved stellar population properties across 10 010 nearby galaxies from the final data release of the MaNGA survey. The full spectral fitting code FIREFLY is employed to derive parameters such as stellar ages, metallicities, stellar and remnant masses, star formation histories, star formation rates, and dust attenuation. In addition to Voronoi-binned measurements, our VAC also provides global properties, such as central values and radial gradients. Two variants of the VAC are available: presenting the results from fits using the M11-MILES and the novel MaStar stellar population models. MaStar allows to constrain the fit over the whole MaNGA wavelength range, extends the age-metallicity parameter space, and uses empirical spectra from the same instrument as MaNGA. The fits employing MaStar models find, on average, slightly younger ages, higher mass-weighted metallicities, and smaller colour excesses. These differences are reduced when matching the wavelength range and converging template grids. We further report that FIREFLY stellar masses are systematically lower by ~0.3 dex than masses from the MaNGA PCA and Pipe3D VACs, but match masses from the NSA best with only ~0.1-dex difference. Finally, we show that FIREFLY stellar ages correlate with spectral index age indicators H δ A and D n (4000), though with a clear additional metallicity dependence.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2020

How eigenmode self-interaction affects zonal flows and convergence of tokamak core turbulence with toroidal system size

Self-interaction is the process by which a microinstability eigenmode that is extended along the direction parallel to the magnetic field interacts non-linearly with itself. This effect is particularly significant in gyrokinetic simulations accounting for kinetic passing electron dynamics and is known to generate stationary $E\times B$ zonal flow shear layers at radial locations near low-order mode rational surfaces (Weikl et al. Phys. Plasmas, vol. 25, 2018, 072305). Here, we find that self-interaction, in fact, plays a very significant role in also generating fluctuating zonal flows, which is critical to regulating turbulent transport throughout the radial extent. Unlike the usual picture of zonal flow drive in which microinstability eigenmodes coherently amplify the flow via modulational instabilities, the self-interaction drive of zonal flows from these eigenmodes are uncorrelated with each other. It is shown that the associated shearing rate of the fluctuating zonal flows therefore reduces as more toroidal modes are resolved in the simulation. In simulations accounting for the full toroidal domain, such an increase in the density of toroidal modes corresponds to an increase in the toroidal system size, leading to a finite system size effect that is distinct from the well-known profile shearing effect.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

A high fidelity and user-friendly equation-oriented optimization model for carbon capture using a novel water-lean solvent

Research Triangle Institute (RTI) International and SLB have developed a novel water-lean solvent technology for carbon capture, demonstrating low specific reboiler duty (SRD) values at capture rates exceeding 90%. At the Technology Centre Mongstad (TCM) pilot plant, the technology achieved an SRD of 2.55 GJ/t-CO2 at 95% capture, utilizing an intercooler and a 5°C temperature approach in the lean/rich solvent cross exchanger. To meet varying carbon capture targets for Front End Engineering and Design (FEED) studies and to enable real-time optimization and advanced process control, an efficient optimization model is required. This model needs to minimize energy demand for a given capture rate and determine optimal operating parameters in response to fluctuating flue gas conditions. While an existing Aspen Plus simulation model, developed by RTI and SLB, accurately matches TCM plant data, its sequential modular (SM) strategy is too slow for real-time applications due to recycle streams and tight heat integration inherent in solvent-based carbon capture processes. Although an equation-oriented (EO) modeling strategy is more suitable for optimizing these processes, its adoption has been limited by several factors: feature limitations in Aspen Plus EO mode (e.g., lack of balance block support), a less user-friendly interface for variable identification and loop solving, complex troubleshooting of convergence issues, and the necessity for accurate initial values.

carbon capture↗

DOE OSTI2020

Creation of discrete active site domains via mesoporous silica poly(styrene) composite materials for incompatible acid–base cascade reactions

This work highlights the design and synthesis of bifunctional mesoporous silicate – polymer composite dual acid–base supported cascade catalysts. Compartmentalization of the two incompatible active sites is sought by segregating acid sites on the silica surface, and base sites within polymer chains and/or polymer domains. The ability to isolate and segregate active sites via control of the mesoporous silica pore size and polymer molecular weight is probed with silica samples functionalized by a grafting-to process. Supplemental activator and reducing agent (SARA) atom transfer radical polymerization is used to synthesize random copolymers containing protected primary amines. Thiol–ene ‘click’ chemistry facilitates silica functionalization via a convergent approach, with the ene-functionalized polymer end group and silica-grafted thiols forming SBA/MCM-SH-poly(styrene-co-2-(4-vinylbenzyl)isoindoline-1,3-dione). Polymer deprotection and thiol oxidation produces primary amine/sulfonic acid containing composite catalysts. With the polymer supported Lewis base and silica grafted Brønsted acid, the two-step deacetalization – Knoevenagel condensation cascade is explored to assess the ability of these polymer/silica hybrids to segregate active sites, allowing both acid and base site accessibility. Six composite catalysts are synthesized and tested in individual and cascade reactions with kinetic results demonstrating that lower molecular weight SBA-15-P1 and MCM-41-P1 catalysts outperform (higher turnover frequencies and initial rates) their higher molecular weight analogues, as well as a polymer-free system containing molecular active sites dispersed on the silica surface. Higher molecular weight composite catalysts perform more poorly due to limited chain solubility, mass transfer limitations, and poor catalyst accessibility. In many cases, the polymer chains effectively thread into the mesopores, with higher molecular weight polymers leading to pore blockage and inhibited mass transfer.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Formation and evolution of protostellar accretion discs – II. From 3D simulation to a simple semi-analytic model of Class 0/I discs

Here we use a 3D radiative non-ideal magnetohydrodynamic simulation to investigate the formation and evolution of a young protostellar disc from a magnetized pre-stellar core. The simulation covers the first ${\sim }10\, {\rm kyr}$ after protostar formation and shows a massive, weakly magnetized disc with radius that initially grows and then saturates at ${\sim }30\, {\rm au}$. The disc is gravitationally unstable with prominent large-amplitude spiral arms. We use our simulation results and a series of physical arguments to construct a predictive and quantitative physical picture of Class 0/I protostellar disc evolution from several aspects, including (i) the angular-momentum redistribution in the disc, self-regulated by gravitational instability to make most of the disc marginally unstable; (ii) the thermal profile of the disc, well-approximated by a balance between radiative cooling and accretion heating; and (iii) the magnetic-field strength and magnetic-braking rate inside the disc, regulated by non-ideal magnetic diffusion. Using these physical insights, we build a simple 1D semi-analytic model of disc evolution. We show that this 1D model, when coupled to a computationally inexpensive simulation for the evolution of the surrounding pseudo-disc, can be used reliably to predict disc evolution in the Class 0/I phase. The predicted long-term evolution of disc size, which saturates at ${\sim }30\, {\rm au}$ and eventually shrinks, is consistent with a recent observational survey of Class 0/I discs. Such hierarchical modelling of disc evolution circumvents the computational difficulty of tracing disc evolution through Class 0/I phase with direct, numerically converged simulations.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2024

Enhanced Production of Λ b 0 Baryons in High-Multiplicity p p Collisions at s = 13 TeV

The production rate of Λ b 0 baryons relative to B 0 mesons in p p collisions at a center-of-mass energy s = 13 TeV is measured by the LHCb experiment. The ratio of Λ b 0 to B 0 production cross sections shows a significant dependence on both the transverse momentum and the measured charged-particle multiplicity. At low multiplicity, the ratio measured at LHCb is consistent with the value measured in e + e − collisions, and increases by a factor of ∼ 2 with increasing multiplicity. At relatively low transverse momentum, the ratio of Λ b 0 to B 0 cross sections is higher than what is measured in e + e − collisions, but converges with the e + e − ratio as the momentum increases. These results imply that the evolution of heavy b quarks into final-state hadrons is influenced by the density of the hadronic environment produced in the collision. Comparisons with several models and implications for the mechanisms enforcing quark confinement are discussed. © 2024 CERN, for the LHCb Collaboration 2024 CERN

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2022

State Estimation for Distribution Networks with Asynchronous Sensors Using Stochastic Descent: Preprint

This paper investigates the problem of state estimation for distribution networks with asynchronous sensors comprising of a mix of smart meters and phasor measurement units (PMUs) with multiple sampling and reporting rates. We consider two independent scenarios of state estimation and tracking, with either voltages or currents as states. With these two sets, we investigate estimation under (a) full data, assuming all measurements are available and (b) limited data, where an online algorithmic approach is adopted to estimate the possibly time-varying states by processing measurements as and when available. The proposed algorithm, inspired by the classical Stochastic Gradient Descent (SGD) approach updates the states based on the previous estimate and the newly available measurements. Finally, we demonstrate the estimation and tracking efficacy through numerical simulations on the IEEE-37 test network, while also highlighting how estimation with currents as states leads to faster convergence.

asynchronous sensors↗

DOE OSTI2021

Modeling fission product diffusion in TRISO fuel particles with BISON

Diffusion of fission products in intact TRISO particles depends on particle geometry, fission product source rates, time, temperature, and temperature-dependent diffusion coefficients. Simulating this diffusion process requires models for source rates and diffusion coefficients, plus computation of the temperature field if not prescribed. In addition, simulation quality depends on discretization of the geometry, appropriate time stepping, and the accuracy of the solution method. In this paper, we explore the simulation of fission product diffusion in TRISO fuel particles using the finite element method via the fuel performance code Bison. Recent material model development has occurred in Bison for each material present in tri-structural isotropic (TRISO) fuel particles: the buffer, inner pyrolytic carbon, silicon carbide, and outer pyrolytic carbon layers, as well as the fuel kernel. Also, new mesh generation and fission product release fraction capabilities have been added. Diffusion capabilities are shown to converge to the correct solution via formal verification tests. A large number of code benchmarking problems are also given, with good results, showing that Bison’s computed release fractions closely match those of other software tools. Finally, a significant validation effort is detailed in which fission product release, measured as part of the AGR-1 capsule experiments, is compared to Bison outputs. Bison outputs compare very well to the experimental data and to PARFUME results.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2025

Machine learning informed rational design of high entropy double perovskite oxide universal air/steam electrodes for solid oxide electrochemical cells

Due to their high efficiency and versatility, solid oxide electrochemical cells (SOCs) are poised to play a significant role in future energy conversion and storage applications. In recent years, SOCs have bifurcated into two distinct categories: traditional oxygen-ion conducting SOCs that typically operate from ∼650—850 °C and the more recent proton-conducting ceramic (PCC) SOCs that typically operate from ∼400—650 °C. Current performance and lifetime of both oxygen-ion conducting SOCs and PCCs is primarily limited by the air/steam electrode, which facilitates the oxygen reduction reaction (ORR) during fuel cell operation and must also facilitate the oxygen evolution reaction (OER) during electrolysis operation. Here, we present a newly designed high-entropy double perovskite oxide suitable as a universal ORR/OER electrode for both oxygen-ion conducting SOCs and PCCs. Machine learning methods are applied to identify chemical descriptors for highly catalytic high-entropy double perovskite oxides (AA’B 2 O 6 ) across a large compositional space. Based on the machine-learning guidance, we ultimately converge on Ba 0.9 Cs 0.1 (Ca 0.2 Gd 0.2 La 0.2 Pr 0.2 Sr 0.2 )Co 1.5 Fe 0.5 O 6 (CsBaHEO) as a universal air/steam electrode. Structure stabilization is accomplished by an equimolar five-cation high-entropy composition on the A’-site, while cesium substitution on the A-site enhances the electrical conductivity and leads to a higher oxygen vacancy concentration. This material exhibits versatility and high performance in reversible oxygen-ion SOCs, reversible PCCs, and also large-scale tubular PCCs. For example, the CsBaHEO-based PCC reaches 1018 mW∙cm −2 at 600°C, while a large-scale tubular PCC using CsBaHEO for electrolysis achieves a hydrogen production rate of 21.314 ML∙min −1 at 600 °C.

Cell↗

DOE OSTI2024

The Impact of Radiative Transfer at Reduced Spectral Resolution in Large‐Eddy Simulations of Convective Clouds

Abstract Many radiative transfer schemes approximate the spectral integration over ∼10 5 to ∼10 6 wavelengths with correlated k ‐distributions methods that typically require only 10 1 –10 2 spectral integration points ( g ‐points). The exact number of g ‐points is then chosen as an optimal balance between computational costs and accuracy, normally assessed in terms of a number of radiative quantities. How this radiative accuracy propagates to simulation accuracy, however, is not straightforward. In this study, we therefore explore the sensitivity of cloud properties in large‐eddy simulations (LES) to the accuracy of radiative fluxes and heating rates. We first generate smaller sets of g ‐points from existing k ‐distributions by repeatedly combining adjacent g ‐points while maintaining the highest possible accuracy on a chosen set of radiative metrics. Next, we perform three sets of LES with varying cloud—radiation coupling pathways, and therefore different requirements for the accuracy of the radiative transfer computations, to investigate how these smaller and thus less accurate k ‐distributions affect simulation characteristics. The decrease in radiative accuracy with 3–4 times smaller k ‐distributions results in biases in cloud properties that are relative small compared to their temporal fluctuations. These results show potential for speeding up radiative transfer computations in cloud‐resolving models by reducing the resolved spectral detail. However, more statistically converged simulations and a wider set of case studies is required to fully assess the robustness of our results.

Meteorology & Atmospheric Sciences↗

DOE OSTI2024

Multifaceted aerosol effects on precipitation

Aerosols have been proposed to influence precipitation rates and spatial patterns from scales of individual clouds to the globe. However, large uncertainty remains regarding the underlying mechanisms and importance of multiple effects across spatial and temporal scales. Here, in this study, we review the evidence and scientific consensus behind these effects, categorized into radiative effects via modification of radiative fluxes and the energy balance, and microphysical effects via modification of cloud droplets and ice crystals. Broad consensus and strong theoretical evidence exist that aerosol radiative effects (aerosol–radiation interactions and aerosol–cloud interactions) act as drivers of precipitation changes because global mean precipitation is constrained by energetics and surface evaporation. Likewise, aerosol radiative effects cause well-documented shifts of large-scale precipitation patterns, such as the intertropical convergence zone. The extent of aerosol effects on precipitation at smaller scales is less clear. Although there is broad consensus and strong evidence that aerosol perturbations microphysically increase cloud droplet numbers and decrease droplet sizes, thereby slowing precipitation droplet formation, the overall aerosol effect on precipitation across scales remains highly uncertain. Global cloud-resolving models provide opportunities to investigate mechanisms that are currently not well represented in global climate models and to robustly connect local effects with larger scales. This will increase our confidence in predicted impacts of climate change.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

304L Can Crush Validation Studies

Accurate prediction of ductile behavior of structural alloys up to and including failure is essential in component or system failure assessment, which is necessary for nuclear weapons alteration and life extensions programs of Sandia National Laboratories. Modeling such behavior requires computational capabilities to robustly capture strong nonlinearities (geometric and material), rate- dependent and temperature-dependent properties, and ductile failure mechanisms. This study's objective is to validate numerical simulations of a high-deformation crush of a stainless steel can. The process consists of identifying a suitable can geometry and loading conditions, conducting the laboratory testing, developing a high-quality Sierra/SM simulation, and then drawing comparisons between model and measurement to assess the fitness of the simulation in regards to material model (plasticity), finite element model construction, and failure model. Following previous material model calibration, a J 2 plasticity model with a microstructural BCJ failure model is employed to model the test specimen made of 304L stainless steel. Simulated results are verified and validated through mesh and mass-scaling convergence studies, parameter sensitivity studies, and a comparison to experimental data. The converged mesh and degree of mass-scaling are the mesh discretization with 140,372 elements, and a mass scaling with a target time increment of 1.0e-6 seconds and time step scale factor of 0.5, respectively. Results from the coupled thermal-mechanical explicit dynamic analysis are comparable to the experimental data. Simulated global force vs displacement (F/D) response predicts key points such as yield, ultimate, and kinks of the experimental F/D response. Furthermore, the final deformed shape of the can and field data predicted from the analysis are similar to that of the deformed can, as measured by 3D optical CMM scans and DIC data from the experiment.

36 MATERIALS SCIENCE↗

DOE OSTI2023

A sharp interface Lagrangian-Eulerian method for flexible-body fluid-structure interaction

This paper introduces a sharp-interface approach to simulating fluid-structure interaction (FSI) involving flexible bodies described by general nonlinear material models and across a broad range of mass density ratios. This new flexible-body immersed Lagrangian-Eulerian (ILE) scheme extends our prior work on integrating partitioned and immersed approaches to rigid-body FSI. Our numerical approach incorporates the geometrical and domain solution flexibility of the immersed boundary (IB) method with an accuracy comparable to body-fitted approaches that sharply resolve flows and stresses up to the fluid-structure interface. Unlike many IB methods, our ILE formulation uses distinct momentum equations for the fluid and solid subregions with a Dirichlet-Neumann coupling strategy that connects fluid and solid subproblems through simple interface conditions. As in earlier work, we use approximate Lagrange multiplier forces to treat the kinematic interface conditions along the fluid-structure interface. This penalty approach simplifies the linear solvers needed by our formulation by introducing two representations of the fluid-structure interface, one that moves with the fluid and another that moves with the structure, that are connected by stiff springs. This approach also enables the use of multi-rate time stepping, which allows us to use different time step sizes for the fluid and structure subproblems. Our fluid solver relies on an immersed interface method (IIM) for discrete surfaces to impose stress jump conditions along complex interfaces while enabling the use of fast structured-grid solvers for the incompressible Navier-Stokes equations. The dynamics of the volumetric structural mesh are determined using a standard finite element approach to large-deformation nonlinear elasticity via a nearly incompressible solid mechanics formulation. This formulation also readily accommodates compressible structures with a constant total volume, and it can handle fully compressible solid structures for cases in which at least part of the solid boundary does not contact the incompressible fluid. Selected grid convergence studies demonstrate second-order convergence in volume conservation and in the pointwise discrepancies between corresponding positions of the two interface representations as well as between first and second-order convergence in the structural displacements. The time stepping scheme is also demonstrated to yield second-order convergence. To assess and validate the robustness and accuracy of the new algorithm, comparisons are made with computational and experimental FSI benchmarks. Test cases include both smooth and sharp geometries in various flow conditions. Furthermore, we also demonstrate the capabilities of this methodology by applying it to model the transport and capture of a geometrically realistic, deformable blood clot in an inferior vena cava filter.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2022

Decay Dose Shielding Analysis with Hybrid Unstructured Mesh/Constructive Solid Geometry Monte Carlo Calculation and ADVANTG Acceleration

The Oak Ridge National Laboratory (ORNL) Second Target Station (STS) neutron production facility is an accelerator driven pulsed neutron source that is currently being actively developed at ORNL. The neutrons are produced by proton-induced spallation reactions. A proton beam of 700 kW power is delivered to a spallation target in short, less than 1 µs long pulses, with 15 Hz repetition rate. The spallation target of ORNL STS is a rotating water-cooled tungsten target with tantalum cladding housed in a stainless-steel shroud. It is divided into 21 segments. These segments become highly activated due to spallation reactions or nuclei transmutation by the emitted neutrons. The radioactive nuclides continue to decay after ceasing operation. The decay dose rates generated from the target segments once they are removed from their operational location within the core vessel must be accurately quantified to determine the shielding configurations of remote handling tools and transport casks and to aid in planning maintenance events. To determine the shielding configurations needed for an activated target segment after ceasing operation, both the hybrid unstructured mesh (UM)/constructive solid geometry (CSG) approach that was previously utilized for STS analyses [1] and the ADVANTG code [2] were used. Even though the ADVANTG code does not include UM capability, the utilization of its advanced variance reduction technique was crucial to accelerate the extremely difficult final photon transport calculation in this analysis. This paper also describes the procedures taken to mitigate the convergence issues that occur when ADVANTG uses a source definition that does not match the source of the final Monte Carlo (MC) calculation. These convergence issues often occur because of inconsistencies between source and transport biasing parameters.

Ibrahim, Ahmad↗

DOE OSTI2024

Poromechanical cohesive interface element with combined Mode I-II cohesive zone elastoplasticity for simulating fracture in fluid-saturated porous media

A combined Mode I-II cohesive zone (CZ) elasto-plastic constitutive model, and a two-dimensional (2D) cohesive interface element (CIE) are formulated and implemented at small strain within an ABAQUS User Element (UEL) for simulating 2D crack nucleation and propagation in fluid-saturated porous media. Here, the CZ model mitigates problems of convergence for the global Newton-Raphson solver within ABAQUS, which when combined with a viscous stabilization procedure allows for simulation of post-peak response under load control for coupled poromechanical finite element analysis, such as concrete gravity dam stability analysis. Verification examples are presented, along with a more complex ambient limestone-concrete wedge fracture experiment, water-pressurized concrete wedge experiment, and concrete gravity dam stability analyses. A calibration procedure for estimating the CZ parameters is demonstrated with the limestone-concrete wedge fracture process. For the water-pressurized concrete wedge fracture experiment it is shown that the inherent time-dependence of the poromechanical CIE analysis provides a good match with experimental force versus displacement results at various crack mouth opening rates, yet misses the pore water pressure evolution ahead of the crack tip propagation. This is likely a result of the concrete being partially-saturated in the experiment, whereas the finite element analysis assumes fully water saturated concrete. For the concrete gravity dam analysis, it is shown that base crack opening and associated water uplift pressure leads to a reduced Factor of Safety, which is confirmed by separate analytical calculations.

97 MATHEMATICS AND COMPUTING↗