Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “continuum modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

Nondestructive Characterization Techniques Used for Ceramic Matrix Composite Life Determination

Recent results indicate that the specific damping capacity and resonant frequency measurements taken periodically during a component's lifetime is able to quantify the mechanical fatigue of CMCS. This gives hope for the potential of determining the actual and residual life of CMC materials using a combination of nondestructive techniques. If successful, then this new paradigm for life prediction of CMCs could revolutionize the approach for designing and servicing CMC components, thereby significantly reducing costs for design, development, health monitoring, and maintenance of CMC components and systems. The Nondestructive Characterization (NDC) life prediction approach would complement life prediction using micromechanics and continuum finite element models. This paper reports on the initial concept of NDC life prediction, a review of the C/SiC blisk damping data, and how changes in the specific damping capacity & ultrasonic elastic modulus data have established the concept as a possibility.

Effinger, Michael↗
NASA NTRS2000

Quiescent Giant Molecular Cloud Cores in the Galactic Center

We have used the Long Wavelength Spectrometer (LWS) aboard the Infrared Space Observatory (ISO) to map the far-infrared continuum emission (45-175 micrometer) toward several massive Giant Molecular Cloud (GMC) cores located near the Galactic center. The observed far-infrared and submillimeter spectral energy distributions imply low temperatures (approx. 15 - 22 K) for the bulk of the dust in all the sources, consistent with external heating by the diffuse ISRF and suggest that these GMCs do not harbor high- mass star-formation sites, in spite of their large molecular mass. Observations of FIR atomic fine structure lines of C(sub II) and O(sub I) indicate an ISRF enhancement of approx. 10(exp 3) in the region. Through continuum radiative transfer modeling we show that this radiation field strength is in agreement with the observed FIR and submillimeter spectral energy distributions, assuming primarily external heating of the dust with only limited internal luminosity (approx. 2 x 10(exp 5) solar luminosity). Spectroscopic observations of millimeter-wave transitions of H2CO, CS, and C-34S carried out with the Caltech Submillimeter Observatory (CSO) and the Institut de Radio Astronomie Millimetrique (IRAM) 30-meter telescope indicate a gas temperature of approx. 80 K, significantly higher than the dust temperatures, and density of approx. 1 x 10(exp 5)/cc in GCM0.25 + 0.01, the brightest submillimeter source in the region. We suggest that shocks caused by cloud collisions in the turbulent interstellar medium in the Galactic center region are responsible for heating the molecular gas. This conclusion is supported by the presence of wide-spread emission from molecules such as SiO, SO, and CH3OH, which are considered good shock tracers. We also suggest that the GMCs studied here are representative of the "typical", pre-starforming cloud population in the Galactic center.

Lis, D. C.↗
NASA NTRS2018

Modeling Fiber Kinking at the Microscale and Mesoscale

A computational micromechanics (CMM) model is employed to interrogate the assumptions of a recently developed mesoscale continuum damage mechanics (CDM) model for fiber kinking. The CMM model considers an individually discretized three dimensional fiber and surrounding matrix accounting for nonlinearity in the fiber, matrix plasticity, fiber/matrix interface debonding, and geometric nonlinearity. Key parameters of the CMM model were measured through experiments. In particular, a novel experimental technique to characterize the in situ longitudinal compressive strength of carbon fibers through indentation of micropillars is presented. The CDM model is formulated on the basis of Budiansky's fiber kinking theory (FKT) with a constitutive deformation-decomposition approach to alleviate mesh size sensitivity. In contrast to conventional mesoscale CDM models that prescribe a constitutive response directly, the response of the proposed model is an outcome of material nonlinearity and large rotations of the fiber direction following FKT. Comparison of the predictions from the CMM and CDM models shows remarkable correlation in strength, post-peak residual stress, and fiber rotation, with less than 10% difference between the two models in most cases. Additional comparisons are made with several fiber kinking models proposed in the literature to highlight the efficacy of the two models. Finally, the CMM model is exercised in parametric studies to explore opportunities to improve the longitudinal compression strength of a ply through the use of nonconventional microstructures.

Herraez, Miguel↗
NASA NTRS2020

NuSTAR Observation of GROJ1744−28 at Low Mass Accretion Rate

Context.Neutron stars in low-mass X-ray binaries (LMXBs) are important systems to study the physics of accretion onto compact ob-jects. The system GRO J1744−28 is particularly interesting, as it usually shows clear pulsations as well as X-ray bursts. Additionally,there are claims for a magnetic field of 5×1011G through the detection of a Cyclotron Resonant Scattering Feature (CRSF).Aims.We present the spectral analysis of GRO J1744−28 using∼29 ks of NuSTAR data taken in 2017 February at a low luminosityof 3.2×1036erg s−1(3–50 keV). Our goal is to study the variability of the source spectrum with pulse phase and to search for the claimed CRSF. Methods.The continuum spectrum is modeled with an absorbed power-law with exponential cut-off, and an additional iron line component. We find no obvious indications for a CRSF and therefore perform a detailed cyclotron line search using statistical methods.We perform this search on pulse phase-averaged as well as phase-resolved spectra. Results.GRO J1744−28 was observed at one of the lowest luminosities studied so far. The previously detected Type II X-ray bursts re absent. Clear pulsations at a period of 2.141124(9) Hz are detected. The pulse profile shows an indication of a secondary peak,which was not seen at higher flux. The 4σupper limit for the strength of a CRSF in the 3–20 keV band is 0.07 keV, lower than the strength of the line found at higher luminosity. Conclusions.The detection of pulsations shows that the source did not enter the “propeller” regime, even though the source flux of4.15×10−10erg cm−2s−1was almost one order of magnitude below the threshold for the propeller regime claimed in previous studies on this source. The transition into the propeller regime in GRO J1744−28 must therefore be below a luminosity of 3.2×1036erg s−1(3–50 keV), which implies a surface magnetic field.2.9×1011G and mass accretion rate.1.7×1016g s−1. A change of the CRSF depth as function of luminosity is not unexpected and has been observed in other sources. This result possibly implies a change in emission geometry as function of mass accretion rate to reduce the depth of the line below our detection limit.

Ole König↗
NASA NTRSDate not supplied

Validating Drag and Heating Coefficients for Hollow Reentry Objects in Continuum Flow Using a Mach 7 Ludwieg Tube

Drag and heating coefficient databases and models are crucial to destructive reentry simulation. The NASA Orbital Debris Program Office (ODPO) develops, maintains, and performs analysis with the Object Reentry Survival Analysis Tool (ORSAT), which comprises drag and heating models for free molecular, transitional, and continuum flow regimes. These models have, in the past, only included solid, convex, blunt shapes (such as boxes, spheres, and cylinders). Previous work led by ODPO includes the extension of these models to hollow cylinders and square boxes in free molecular and transitional flow using the Direct Simulation Monte Carlo (DSMC) method. Since 2019, the ODPO has continued its program of DSMC simulations and extended the project to include analyses with the NASA Data Parallel Line Relaxation (DPLR) program on hollow cylinders and boxes (with varying wall thickness-diameter ratio). In fall 2022, the ODPO began a collaboration with the University of Texas San Antonio (UTSA) to use the Mach 7 Ludwieg Tube facility to validate the model built using numerical simulations. This facility can replicate (at a scale of approximately 100:1) the conditions seen by reentering objects near typical demise altitudes. We present here the drag and heating coefficients derived from the continued DSMC simulations, the new DPLR simulations, and the 26-test series at UTSA.

Chris Ostrom↗
NASA NTRS2023

Validating Drag and Heating Coefficients for Hollow Reentry Objects in Continuum Flow Using a Mach 7 Ludwieg Tube

Drag and heating coefficient databases and models are crucial to destructive reentry simulation. The NASA Orbital Debris Program Office (ODPO) develops, maintains, and performs analysis with the Object Reentry Survival Analysis Tool (ORSAT), which comprises drag and heating models for free molecular, transitional, and continuum flow regimes. These models have, in the past, only included solid, convex, blunt shapes (such as boxes, spheres, and cylinders). Previous work led by ODPO includes the extension of these models to hollow cylinders and square boxes in free molecular and transitional flow using the Direct Simulation Monte Carlo (DSMC) method. Since 2019, the ODPO has continued its program of DSMC simulations and extended the project to include analyses with the NASA Data Parallel Line Relaxation (DPLR) program on hollow cylinders and boxes (with varying wall thickness-diameter ratio). In fall 2022, the ODPO began a collaboration with the University of Texas San Antonio (UTSA) to use the Mach 7 Ludwieg Tube facility to validate the model built using numerical simulations. This facility can replicate (at a scale of approximately 100:1) the conditions seen by reentering objects near typical demise altitudes. We present here the drag and heating coefficients derived from the continued DSMC simulations, the new DPLR simulations, and the 26-test series at UTSA.

Chris Ostrom↗
NASA NTRS1986

Continuum variability of the optically-active radio-quiet quasar GQ Comae

The use of thermal accretion disk models to explain the continuum shape and variability of GQ Comae is outlined. The mass is estimated at 7 x 10 to the 8th solar masses and its accretion rate at 0.1-0.2 solar masses per year. The effects of assuming different values of the inclination angle of the disk, and of the specific angular momentum of the central black hole, are explored. Additional uncertainties in the emergent fluxes in these models are discussed.

Sitko, Michael L.↗
NASA NTRS1983

Inclusion of discrete-to-continuum coupling in multiphoton excitation and dissociation calculations

A nonperturbative approach to multiphoton excitation and dissociation of molecules is presented in which coupling to the continuum is treated explicitly. Transitions among continuum levels are not modeled directly, but something of their effect is represented by assuming that the continuum population density is so low as to be effectively zero at all times. Two trial applications are briefly discussed.

Zimmerman, I. H.↗
NASA NTRS2011

Uncovering the Spectral Energy Distribution in Active Galaxies Using High Ionization Mid-Infrared Emission Lines

The shape of the spectral energy distribution of active galaxies in the EUV soft X-ray band (13.6 eV to 1 keV) is uncertain because obscuration by dust and gas can hamper our view of the continuum. To investigate the shape of the spectral energy distribution in this energy band, we have generated a set of photoionization models which reproduce the small dispersion found in correlations between high-ionization mid-infrared emission lines in a sample of hard X-ray selected AGN. Our calculations show that a broken power-law continuum model is sufficient to reproduce the [Ne V]14.32 microns/[Ne III], [Ne V]24.32 microns/[O IV]25.89 micron and [O IV] 25.89 microns/[Ne III] ratios, and does not require the addition of a "big bump" EUV model component. We constrain the EUV-soft X-ray slope, alpha(sub i), to be between 1.5 - 2.0 and derive a best fit of alpha(sub i) approx. 1.9 for Seyfert 1 galaxies, consistent with previous studies of intermediate redshift quasars. If we assume a blue bump model, most sources in our sample have derived temperatures between T(sub BB) = 10(exp 5.18) K to 10(exp 5.7) K, suggesting that the peak of this component spans a large range of energies extending from approx. (Lambda)600 A to > (Lambda)1900 A. In this case, the best fitting peak energy that matches the mid-infrared line ratios of Seyfert 1 galaxies occurs between approx. (Lambda)700-(Lambda)1000 A. Despite the fact that our results do not rule out the presence of an EUV bump, we conclude that our power-law model produces enough photons with energies > 4 Ry to generate the observed amount of mid-infrared emission in our sample of BAT AGN.

Melendez, M.↗
NASA NTRS2010

Far-IR Measurements at Cerro Toco, Chile: FIRST, REFIR, and AERI

In mid-2009, the Radiative Heating in the Underexplored Bands Campaign II (RHUBC-II) was conducted from Cerro Toco, Chile, a high, dry, remote mountain plateau, 23degS , 67.8degW at 5.4km, in the Atacama Desert of Northern Chile. From this site, dominant IR water vapor absorption bands and continuum, saturated when viewed from the surface at lower altitudes, or in less dry locales, were investigated in detail, elucidating IR absorption and emission in the atmosphere. Three FTIR instruments were at the site, the Far-Infrared Spectroscopy of the Troposphere (FIRST), the Radiation Explorer in the Far Infrared (REFIR), and the Atmospheric Emitted Radiance Interferometer (AERI). In a side-by-side comparison, these measured atmospheric downwelling radiation, with overlapping spectral coverage from 5 to100um (2000 to 100/cm), and instrument spectral resolutions from 0.5 to 0.64/cm, unapodized. In addition to the FTIR and other ground-based IR and microwave instrumentation, pressure/temperature/relative humidity measuring sondes, for atmospheric profiles to 18km, were launched from the site several times a day. The derived water vapor profiles, determined at times matching the FTIR measurement times, were used to model atmospheric radiative transfer. Comparison of instrument data, all at the same spectral resolution, and model calculations, are presented along with a technique for determining adjustments to line-by-line calculation continuum models. This was a major objective of the campaign.

Cageao, Richard P.↗
NASA NTRS1993

Model atmospheres - Tool for identifying interstellar features

Model atmosphere parameters are derived for 14 early A stars with rotation velocities, from optical spectra, in excess of 80 km/s. The models are compared with IUE observations of the stars in regions where interstellar lines are expected. In general, with the assumption of solar abundances, excellent fits are obtained in regions longward of 2580 A, and accurate interstellar equivalent widths can be derived using models to establish the continuum. The fits are poorer at shorter wavelengths, particularly at 2026-2062 A, where the stellar model parameters seem inadequate. Features indicating mass flows are evident in stars with known infrared excesses. In gamma TrA, variability in the Mg II lines is seen over the 5-year interval of these data, and also over timescales as short as 26 days. The present technique should be useful in systematic studies of episodic mass flows in A stars and for stellar abundance studies, as well as interstellar features.

Frisch, P. C.↗
NASA NTRS1990

Model atmospheres for the early stages of novae in outburst

For the photospheres of classical novae during the early stages of their outbursts, continuum and line blanketed models are presented. The expanding envelopes are characterized by small density gradients that lead to very large geometrical extensions and large temperature differences between inner and outer parts. The spectra show large excesses in the IR and small Balmer jumps which may either be in absorption or emission. For the parameters considered most lines are in absorption if powerlaw density distributions and radiative equilibrium are assumed. The effects of modifications in the temperature structure (e.g., heating from shock fronts) and in the density stratifications as well as changes in the abundances are discussed.

Wehrse, R.↗
NASA NTRS1993

A Realizable Reynolds Stress Algebraic Equation Model

The invariance theory in continuum mechanics is applied to analyze Reynolds stresses in high Reynolds number turbulent flows. The analysis leads to a turbulent constitutive relation that relates the Reynolds stresses to the mean velocity gradients in a more general form in which the classical isotropic eddy viscosity model is just the linear approximation of the general form. On the basis of realizability analysis, a set of model coefficients are obtained which are functions of the time scale ratios of the turbulence to the mean strain rate and the mean rotation rate. The coefficients will ensure the positivity of each component of the mean rotation rate. These coefficients will ensure the positivity of each component of the turbulent kinetic energy - realizability that most existing turbulence models fail to satisfy. Separated flows over backward-facing step configurations are taken as applications. The calculations are performed with a conservative finite-volume method. Grid-independent and numerical diffusion-free solutions are obtained by using differencing schemes of second-order accuracy on sufficiently fine grids. The calculated results are compared in detail with the experimental data for both mean and turbulent quantities. The comparison shows that the present proposal significantly improves the predictive capability of K-epsilon based two equation models. In addition, the proposed model is able to simulate rotational homogeneous shear flows with large rotation rates which all conventional eddy viscosity models fail to simulate.

Shih, Tsan-Hsing↗
NASA NTRS1994

The 1993 multiwavelength campaign on 3C 279: The radio to gamma-ray energy distribution inlow state

Simultaneous observations of 3C 279 at radio, millimeter, near-infrared, optical, ultraviolet (with IUE) and X-ray (with ROSAT) wavelengths were obtained in 1992 December-1993 January, during a three week pointing at the source by the Compton Gamma Ray Observatory. The blazar was in a quiescent or 'low' state during this period. Comparing the multiwavelength energy distribution to that from 1991 June, when 3C 279 was in its brightest recorded gamma-ray state, we find the following: (1) 3C 279 faded dramatically at all frequencies above 10(exp 14) Hz, while the flux variations at low frequencies (radio to millimeter wavelengths) were minor. (2) The near-infrared-optical-ultraviolet spectral shape was softer (steeper) in the quiescent state, and the X-ray spectra also appear softer, although the spectral indix measured by ROSAT refer to a lower energy band than that measured earlier with Ginga. (3) The ratio of the gamma-ray luminosity to that across all other frequencies decreased from a value of approximately equal to 10 in the flaring state to a value approximately equal to 1 in the quiescent state. These findings imply that the production of gamma-rays is closely related to the optical-ultraviolet continuum, in agreement with models where gamma-rays are produced through inverse Compton (IC) scattering by relativistic electrons emitting the synchrotron continuum. The observed nonlinear relation between the synchrotron and IC requires both a change in the electron spectrum and an associated change in the seed photons.

Maraschi, L.↗
NASA NTRS1989

A new rotational relaxation model for use in hypersonic computational fluid dynamics

The theoretical basis for the Landau-Teller equation commonly used to model rotational nonequilibrium is reviewed. Several assumptions underlying this model are indicated to be unrealistic for rarefied hypersonic flow. A new rotational nonequilibrium model based on recent measurements up to 2000K of quantum state transition rates is presented. The new model is applied to the continuum study of normal shock wave structure using both the Burnett equations and a simplified nonlinear constitutive relation. Comparisons are made between shock wave temperature profiles generated from the new model and those generated using the Landau-Teller model. Comparisons of shock reciprocal thicknesses between experimental data for nitrogen and continuum solutions using both rotational models are made. The new rotational model agrees well with experiment up to Mach 6, and under predicts shock thickness at higher Mach numbers. The Landau-Teller model agrees well with experimental shock thickness up to Mach 3, and over predicts the thickness at higher Mach numbers. A modification to the rotational collision number in the Landau-Teller model is found to give results which agree with experimental shock thicknesses at all Mach numbers up to 11.

Chapman, Dean E.↗
NASA NTRS1982

1 millimeter continuum observations of quasars

Broadband 1-mm continuum observations of 37 active extragalactic objects are discussed in the context of several models of the radio and IR continuum emission of compact extragalactic objects. The observed correlation of the 1-mm flux density of 'blazars', or BL Lac objects and optically violent, variable quasars, with both radio and IR emission, is a natural consequence of the attribution of the radio-to-optical blazar continuum to synchrotron radiation from a relativistic jet viewed nearly along its axis. It is shown that a Comptonization model in which the IR continuum of quasars is produced by the upscattering of radio photons into the IR by a thermal plasma will be in accord with the 1-mm and IR data, if these photons have frequencies in the 10 to the 12th to 10 to the 13th Hz range.

Ennis, D. J.↗
NASA NTRS1994

Disk instability and the spectral evolution of the 1992 outburst of the intermediate polar GK Persei

The disk instability model can explain the previous history of dwarf-nova-like outbursts in the intermediate polar GK Per, which occur about once every three years. Disk models that reproduce the recurrence time and outburst light curves suggest that GK Per has a large effective inner disk radius (approx. 30-40 white dwarf radii) truncated by a strong magnetic field (10(exp 7) G). In this context, the effective radius is that of the portion of the disk that participates in the disk thermal instability. The radius derived is larger than the corotation radius, which must be an upper limit on the true dynamical inner radius of the disk. Disk instability models with this large effective inner radius predict that the ultraviolet continuum should be rather flat. Here we compare the predictions of the disk instability model to IUE observations of the 1981 outburst and to IUE and ROSAT observations of the recent 1992 outburst of GK Per. The model disk continuum spectral evolution is consistent with the observed UV and optical spectra, especially at maximum and in the early decay phase of the outburst. The consistency of the model with the observed UV spectra suggests that the effective inner radius of the disk is almost constant, independent of mass accretion rate, and that whatever structure lies between the effective inner radius and the corotation radius neither participates in the disk instability nor radiates substantially in the UV. The related physics of the inner disk region will be briefly discussed.

Kim, S.-W.↗