Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “continuous models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Minimizing Segregation During the Controlled Directional Solidification of Dendritic Alloys Publication: Metallurgical and Materials Transactions

Gravity-driven thermosolutal convection that arises during controlled directional solidification (DS) of dendritic alloys promotes detrimental macro-segregation (e.g. freckles and steepling) in products such as turbine blades. Considerable time and effort has been spent to experimentally and theoretically investigate this phenomena; although our knowledge has advanced to the point where convection can be modeled and accurately compared to experimental results, little has been done to minimize its onset and deleterious effects. The experimental work demonstrates that segregation can be. minimized and microstructural uniformity promoted when a slow axial rotation is applied to the sample crucible during controlled directional solidification processing. Numerical modeling utilizing continuation and bifurcation methods have been employed to develop accurate physical and mathematical models with the intent of identifying and optimizing processing parameters.

Grugel, R. N.↗

The Late Peaking Afterglow of GR8 100418A

GRB 100418A is a long Gamma-Ray Burst at redshift z=0.6235 discovered with the Swift Gamma-Ray Burst Explorer with unusual optical and X-ray light curves ' After an initial short-lived, rapid decline in X-rays, the optical and X-ray light curves observed with Swift are approximately flat or rising slightly out to at least approx.7 ks after the trigger, peak at approx.50 ks, and then follow an approximately power-law decay. Such a long optical plateau and late peaking is rarely seen in 6R8 afterglows. Observations with REM during a gap in the Swift coverage indicate a bright optical flare at approx.25 ks, The long plateau phase of the afterglow is interpreted using either a model with continuous injection of energy into the forward shock of the burst or a model in which the 'et of the burst is viewed off-axis. In both models the isotropic kinetic energy in the late afterglow after the plateau phase is >100 times the 10(exp 51) erg of the prompt isotropic gamma-ray energy release. The energy injection model is favored because the off-axis 'et model would require the intrinsic $T f801$ for the GR8 'et viewed on-axis to be very short, approx.10 ms, and the intrinsic isotropic gamma-ray energy release and the true jet energy to be much higher than the typical values of known short GRBs^ The non-detection of a 'et break up to approx.2 Ms indicates a jet half-opening angle of at least 14 degrees, and a relatively high collimation-corrected 'et energy of at least 10(exp 52) erg.

Marshall, Frank↗

Preliminary Characterization Results from the DebriSat Project

The DebriSat project is a continuing effort sponsored by NASA and DoD to update existing break-up models using data obtained from two separate hypervelocity impact tests used to simulate on-orbit collisions. To protect the fragments resulting from the impact tests, "soft-catch" arenas made of polyurethane foam panels were utilized. After each impact test, the test chamber was cleaned and debris resulting from the catastrophic demise of the test article were collected and shipped to the University of Florida for post-impact processing. The post-impact processing activities include collecting, characterizing, and cataloging of the fragments. Since the impact tests, a team of students has been working to characterize the fragments in terms of their mass, size, shape, color and material content. The focus of the 20 months since the impact tests has been on the collection of 2 millimeters- and larger fragments resulting from impact test on the 56 kilogram-representative LEO (Low Earth Orbit) satellite referred to as DebriSat. To date we have recovered in excess of 115,000 fragments, 30,000 more than the prediction of 85,000 fragments from the existing model. We continue to collect fragments but have transitioned to the characterization phase of the post-impact activities. Since the start of the characterization phase, the focus has been to utilize automation to (i) expedite fragment characterization process and (ii) minimize human-in-the- loop. We have developed and implemented such automated processes; e.g., we have automated the data entry process to reduce operator errors during transcription of the measurement data. However, at all steps of the process, there is human oversight to ensure the integrity of the data. Additionally, we have developed and implemented repeatability and reproducibility tests to ensure that the instrumentation used in the characterization process is accurate and properly calibrated. In this paper, the implemented processes are described and preliminary results presented. Additionally, lessons learned from the implemented automations and their impacts on the integrity of the results are discussed.

Rivero, M.↗

On the Use of the Beta Distribution in Probabilistic Resource Assessments

The triangular distribution is a popular choice when it comes to modeling bounded continuous random variables. Its wide acceptance derives mostly from its simple analytic properties and the ease with which modelers can specify its three parameters through the extremes and the mode. On the negative side, hardly any real process follows a triangular distribution, which from the outset puts at a disadvantage any model employing triangular distributions. At a time when numerical techniques such as the Monte Carlo method are displacing analytic approaches in stochastic resource assessments, easy specification remains the most attractive characteristic of the triangular distribution. The beta distribution is another continuous distribution defined within a finite interval offering wider flexibility in style of variation, thus allowing consideration of models in which the random variables closely follow the observed or expected styles of variation. Despite its more complex definition, generation of values following a beta distribution is as straightforward as generating values following a triangular distribution, leaving the selection of parameters as the main impediment to practically considering beta distributions. This contribution intends to promote the acceptance of the beta distribution by explaining its properties and offering several suggestions to facilitate the specification of its two shape parameters. In general, given the same distributional parameters, use of the beta distributions in stochastic modeling may yield significantly different results, yet better estimates, than the triangular distribution.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The core structure and recombination energy of a copper screw dislocation: a Peierls study

The recombination process of dislocations is central to cross-slip, and transmission through Σ3 grain boundaries among other fundamental plastic deformation processes. Despite its importance, a detailed mechanistic understanding remains lacking. In this paper, we apply a continuous dislocation model, inspired by Peierls and Nabarro, complete with an ab-initio computed -surface and continuous units of infinitesimal dislocation slip, towards computing the stress-dependent recombination path of both an isotropic and anisotropic Cu screw dislocation. Under no applied stress, our model reproduces the stacking fault width between Shockley partial dislocations as predicted by discrete linear elasticity. Upon application of a compressive Escaig stress, the two partial dislocations coalesce to a separation of ~|b|. Upon increased loading the edge components of each partial dislocation recede, leaving behind a spread Peierls screw dislocation, indicating the recombined state. We demonstrate that the critical stress required to achieve the recombined state is independent of the shear modulus. Rather the critical recombination stress depends on an energy difference between an unstable fault energy (γτ) and the intrinsic stacking fault energy (γτ-γisf). We report recombination energies of ΔW = 0.168 eV/Å and ΔW = 0.084 eV/Å, respectively, for the Cu screw dislocation within isotropic and anisotropic media. Finally, we develop an analytic model which provides insight into our simulation results which compare favourably with other (similar) models.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Checkerboard patterns in E3SMv2 and E3SM-MMFv2

Abstract. An unphysical checkerboard pattern is identified in E3SMv2 and E3SM-MMF that is detectable across a wide range of timescales, from instantaneous snapshots to multi-year averages. A detection method is developed to quantify characteristics of the checkerboard signal by cataloguing all possible configurations of the eight adjacent neighbors for each cell on the model's cubed sphere grid using daily mean data. The checkerboard pattern is only found in cloud-related quantities, such as precipitation and liquid water path. Instances of pure and partial checkerboard are found to occur more often in E3SMv2 and E3SM-MMF when compared to satellite data regridded to the model grid. Continuous periods of partial checkerboard state are found to be more persistent in both models compared to satellite data, with E3SM-MMF exhibiting more persistence than E3SMv2. The checkerboard signal in E3SMv2 is found to be a direct consequence of the recently added deep convective trigger condition based on dynamically generated CAPE (DCAPE). In E3SM-MMF the checkerboard signal is found to be associated with the “trapping” of cloud-scale fluctuations within the embedded cloud-resolving model. Solutions to remedy this issue are discussed.

54 ENVIRONMENTAL SCIENCES↗

Development of a global 3-D magnetohydrodynamic computational model for solar wind/cometary and planetary studies

Progress is reported in the development of a global, 3-D magnetohydrodynamic computational model to quantitatively describe the detailed continuum field and plasma interaction process of the solar wind with cometary and planetary magneto/ionopause shapes. Activities described include enhancements to the present Level 1 model, development of the 3-D gas dynamic flow field solvers for the Level 2 model, and continued development of the 3-D frozen magnetic field solver for the Level 2 model.

Stahara, S. S.↗

The Role of Uncertainty in Aerospace Vehicle Analysis and Design

Effective uncertainty quantification (UQ) begins at the earliest phase in the design phase for which there are adequate models and continues tightly integrated to the analysis and design cycles as the refinement of the models and the fidelity of the tools increase. It is essential that uncertainty quantification strategies provide objective information to support the processes of identifying, analyzing and accommodating for the effects of uncertainty. Assessments of uncertainty should never render the results more difficult for engineers and decision makers to comprehend, but instead provide them with critical information to assist with resource utilization decisions and risk mitigation strategies. Success would be measured by the tools to enable engineers and decision makers to effectively balance critical project resources against system requirements while accounting for the impact of uncertainty.

Kenny, Sean P.↗

Global High Resolution Crustal Magnetic Field at the Surface of the Moon from Low-Altitude Lunar Prospector Magnetic Gradient Data

We derived new vector gradients based models of crustal magnetic field at the lunar surface with data from the Lunar Prospector (LP) satellite using two model parameterization approaches: a global set of 35820 1° spaced (~30 km) equal area monopoles at 20 km below the surface (O’Brien and Parker, 1994; Olsen et al., 2017) and combined results of subsets of 100000 0.66° spaced monopoles at the same depth. We use the scheme of iteratively reweighted least-squares inversion to compute the initial model. Then the amplitudes of these monopoles are determined by minimizing the misfit to the components together with the global average of |Br| at the ellipsoid surface (i.e. applying a L1 model regularization of Br). In previous approaches using vector fields for modeling, we found that external field contamination leads to spurious anomalies in the downward continued field models even with stringent data selection criteria and ad-hoc noise removal techniques (e.g., satellite’s position in the Moon’s wake w.r.t. the solar wind and in the Earth’s magnetotail, internal/external dipoles fields removal, low-order polynomial removal, joint equivalent source cross-validation technique and visually removing remaining anomalous segments). On the other hand, with the use of gradients-only data (along-track first finite differences), we were able to completely bypass the ad-hoc techniques. Similar processing of Kaguya magnetic data, which have only higher altitude coverage over the most of the Moon except in the region of the South Pole–Aitken (SPA) basin, completely misses some of the anomalies seen in the Lunar Prospector data. The combined Lunar Prospector and Kaguya gradient-based models also severely degrade the derivation of the anomaly fields in many regions. Euler analysis of isolated anomaly features from the Reiner Gamma swirl suggests top depths of about 0.3 to 1.5 km and center depths of 10-14 km; in the region between Stein and Vallier craters north of the SPA basin our analysis suggests top depths of around 1.5 km and center depths of 13-15 km. With the spectral depth determination techniques, the SPA basin region yields depths to the base of magnetization ranging between 15 and 40 km. Three-dimensional modeling and the bulk magnetization determinations of the sources constrained by the Euler and spectral methods is underway.

Gradient↗

Checkerboard Patterns in E3SMv2 and E3SM-MMFv2

An unphysical checkerboard pattern is identified in E3SMv2 and E3SM-MMF that is detectable across a wide range of timescales, from instantaneous snapshots to multi-year averages. A detection method is developed to quantify characteristics of the checkerboard signal by cataloguing all possible configurations of the eight adjacent neighbors for each cell on the model's cubed sphere grid using daily mean data. The checkerboard pattern is only found in cloud-related quantities, such as precipitation and liquid water path. Instances of pure and partial checkerboard are found to occur more often in E3SMv2 and E3SM-MMF when compared to satellite data regridded to the model grid. Continuous periods of partial checkerboard state are found to be more persistent in both models compared to satellite data, with E3SM-MMF exhibiting more persistence than E3SMv2. The checkerboard signal in E3SMv2 is found to be a direct consequence of the recently added deep convective trigger condition based on dynamically generated CAPE (DCAPE). In E3SM-MMF the checkerboard signal is found to be associated with the “trapping” of cloud-scale fluctuations within the embedded cloud-resolving model. Solutions to remedy this issue are discussed.

E3SMv2↗

Titan Haze

The Titan haze exerts a dominating influence on surface visibility and atmospheric radiative heating at optical and near-infrared wavelengths and our desire to understand surface composition and atmospheric dynamics provides a strong motivation to study the properties of the haze. Prior to the Cassini/Huygens missions the haze was known to be global in extent, with a hemispheric contrast asymmetry, with a complicated structure in the polar vortex region poleward of about 55 deg latitude, and with a distinct layer near 370 km altitude outside of the polar vortex at the time of the Voyager 2 flyby. The haze particles measured by the Pioneer and Voyager spacecraft were both highly polarizing and strongly forward scattering, a combination that seems to require an aggregation of small (several tens of nm radius) primary particles. These same properties were seen in the Cassini orbiter and Huygens Probe data. The most extensive set of optical measurements were made inside the atmosphere by the Descent Imager/Spectral Radiometer (DISR) instrument on the Huygens Probe. At the probe location as determined by the DISR measurements the average haze particle contained about 3000 primary particles whose radius is about 40 nm. Three distinct vertical regions were seen in the DISR data with differing particle properties. Refractive indices of the particles in the main haze layer resemble those reported by Khare et al. between O.3S and about 0.7 micron but are more absorbing than the Khare et al. results between 0.7 micron and the long-wavelength limit of the DISR spectra at 1.6 micron. These and other results are described by Tomasko et al., and a broader summary of results was given by Tomasko and West,. New data continue to stream in from the Cassini spacecraft. New data analyses and new laboratory and model results continue to move the field forward. Titan's 'detached' haze layer suffered a dramatic drop in altitude near equinox in 2009 with implications for the circulation and seasonal change in the stratosphere. The book chapter associated with this talk will also present new material on thermal-infrared data analysis and on new developments in laboratory work and haze microphysical modeling.

Anderson, Carrie M.↗

Model Predictive Control of Discrete-Continuous Energy Systems via Generalized Disjunctive Programming

Generalized Disjunctive Programming (GDP) provides an alternative framework to model optimization problems with both discrete and continuous variables. The key idea behind GDP involves the use of logical disjunctions to represent discrete decisions in the continuous space, and logical propositions to denote algebraic constraints in the discrete space. Compared to traditional mixed-integer programming (MIP), the inherent logic structure in GDP yields tighter relaxations that are exploited by global branch and bound algorithms to improve solution quality. In this paper, we present a general GDP model for optimal control of hybrid systems that exhibit both discrete and continuous dynamics. Specifically, we use GDP to formulate a model predictive control (MPC) model for piecewise-affine systems with implicit switching logic. As an example, the GDP-based MPC approach is used as a supervisory control to improve energy efficiency in residential buildings with binary on/off, relay-based thermostats. A simulation study is used to demonstrate the validity of the proposed approach, and the improved solution quality compared to existing MIPbased control approaches.

Bhattacharya, Arnab↗

A Predictive Safety Management System Software Package Based on the Continuous Hazard Tracking and Failure Prediction Methodology

The goal of this research was to integrate a previously validated and reliable safety model, called Continuous Hazard Tracking and Failure Prediction Methodology (CHTFPM), into a software application. This led to the development of a safety management information system (PSMIS). This means that the theory or principles of the CHTFPM were incorporated in a software package; hence, the PSMIS is referred to as CHTFPM management information system (CHTFPM MIS). The purpose of the PSMIS is to reduce the time and manpower required to perform predictive studies as well as to facilitate the handling of enormous quantities of information in this type of studies. The CHTFPM theory encompasses the philosophy of looking at the concept of safety engineering from a new perspective: from a proactive, than a reactive, viewpoint. That is, corrective measures are taken before a problem instead of after it happened. That is why the CHTFPM is a predictive safety because it foresees or anticipates accidents, system failures and unacceptable risks; therefore, corrective action can be taken in order to prevent all these unwanted issues. Consequently, safety and reliability of systems or processes can be further improved by taking proactive and timely corrective actions.

Quintana, Rolando↗

GenMod: A generative modeling approach for spectral representation of PDEs with random inputs

Here, we propose a method for quantifying uncertainty in high-dimensional PDE systems with random parameters, where the number of solution evaluations is small. Parametric PDE solutions are often approximated using a spectral decomposition based on polynomial chaos expansions. For the class of systems we consider (i.e., high dimensional with limited solution evaluations) the coefficients are given by an underdetermined linear system in a regression formulation. This implies additional assumptions, such as sparsity of the coefficient vector, are needed to approximate the solution. Here, we present an approach where we assume the coefficients are close to the range of a generative model that maps from a low to a high dimensional space of coefficients. Our approach is inspired be recent work examining how generative models can be used for compressed sensing in systems with random Gaussian measurement matrices. Using results from PDE theory on coefficient decay rates, we construct an explicit generative model that predicts the polynomial chaos coefficient magnitudes. The algorithm we developed to find the coefficients, which we call GenMod, is composed of two main steps. First, we predict the coefficient signs using Orthogonal Matching Pursuit. Then, we assume the coefficients are within a sparse deviation from the range of a sign-adjusted generative model. This allows us to find the coefficients by solving a nonconvex optimization problem, over the input space of the generative model and the space of sparse vectors. We obtain theoretical recovery results for a Lipschitz continuous generative model and for a more specific generative model, based on coefficient decay rate bounds. We examine three high-dimensional problems and show that, for all three examples, the generative model approach outperforms sparsity promoting methods at small sample sizes.

97 MATHEMATICS AND COMPUTING↗

The ROSAT All-Sky Survey of active binary coronae. II - Coronal temperatures of the RS Canum Venaticorum systems

We present the results from an analysis of X-ray spectra of 44 RS CVn systems obtained during the ROSAT All-Sky Survey with the Position Sensitive Proportional Counter (PSPC). Thermal plasma models with two temperature components are found to reproduce the observations better than single or continuous temperature models. We typically find that a bimodal distribution of temperatures centered near 2 x 10 exp 6 and 1.6 x 10 exp 7 K fit the data best. We show that the PSPC temperatures agree well with those from similar low-resolution measurements, although differences exist, primarily due to differing detector bandpasses. After comparing coronal (either temperature or emission measure) characteristics with stellar parameters including rotation period and dynamo number, we find no compelling relationship. The height-integrated emission measures of the components in the two-temperature models, including a gravity term, are found to be well correlated with temperature.

Dempsey, Robert C.↗

Simulating the Martian Middle and Upper Atmosphere with the NASA Ames Mars GCM.

The NASA Ames Mars Global Climate Model (MGCM) continues to be utilized to examine the dynamical coupling between the lower atmosphere and middle/upper atmosphere. This coupling impacts the transport of water, dust, and chemistry which augments the thermal structure and circulation. The interactions and coupling within the atmosphere are important for understanding the present-day and past atmosphere and climate. MGCM simulations are compared with observations from recent Mars missions to provide model constraints, and in turn, the simulations can then provide context to the observations. This cycle is important to move us forward in our understanding of planetary atmospheres. We will present on one of the fundamental atmospheric features, the thermal structure, and how the physics in the MGCM can elucidate the observed diurnal and seasonal behavior. Additionally, we will focus on the distribution of chemical species which influences the thermal structure and provides additional information on the coupling between the lower and middle/upper atmosphere. Lastly, we will provide a summary of the model capabilities, as the MGCM continues to be improved upon to properly simulate Mars’ atmosphere from the ground to ~250 km.

Amanda Susanne Brecht↗

A robust and efficient generalized real cascade model

This paper describes a new separation cascade model that allows for arbitrary cascade connectivity and includes the effects of mixing, material losses and generalized separation element performance. The model also accommodates mixtures with an arbitrary number of component species. The mathematical and numerical framework of this model includes both time-dependent and steady state cascade simulation. Robust numerical approximations of the continuous mathematical model are accomplished using the Sundials suite of nonlinear algebraic and differential-algebraic equation solvers. Verification of the model is accomplished using manufactured solutions while validation is demonstrated by comparison to published experimental results and benchmarks.

36 MATERIALS SCIENCE↗

Recent progress in low energy neutrino scattering physics and its implications for the standard and beyond the standard model physics

Neutrinos continue to provide a testing ground for the structure of the standard model of particle physics as well as hints towards the physics beyond the standard model. Neutrinos of energies spanning over several orders of magnitude, originating in many terrestrial and astrophysical processes, have been detected via various decay and interaction mechanisms. At MeV scales, there has been one elusive process, until a few years ago, known as coherent elastic neutrino-nucleus scattering (CEvNS) that was theoretically predicted over five decades ago but was never observed experimentally. The recent experimental observation of the CEvNS process by the COHERENT collaboration at a stopped pion neutrino source has inspired physicists across many subfields. This has vital implications for nuclear physics, high-energy physics, astrophysics, and beyond. CEvNS, being a low-energy process, provides a natural window to study light, weakly-coupled, new physics in the neutrino sector. In this review, we intend to provide the current status of low energy neutrino scattering physics and its implications for the standard and beyond the standard model physics. We discuss the general formalism of calculating the tree-level CEvNS cross section and present estimated theoretical uncertainties on the CEvNS cross section stemming from different sources. We also discuss the inelastic scattering of tens of MeV neutrinos that have implications for supernova detection in future neutrino experiments. We discuss how the CEvNS experiments can be used as a testing ground for the Standard Model (SM) weak physics as well as in searching for the Beyond the Standard Model (BSM) physics signals. Any deviation from the SM predicted event rate either with a change in the total event rate or with a change in the shape of the recoil spectrum, could indicate new contributions to the interaction cross-section. The SM implications include the study of weak nuclear form factor and weak mixing angle. The BSM studies include non-standard interactions, neutrino electromagnetic properties, and sterile neutrino searches. In conclusion, stopped pion facilities are also a copious source of neutral and changed mesons that allow study of several dark sector physics scenarios such as vector portal models, leptophobic dark matter as well as axion-like particle searches.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗