Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cloud microphysics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS2008

High Vertically Resolved Atmospheric and Surface/Cloud Parameters Retrieved with Infrared Atmospheric Sounding Interferometer (IASI)

The Joint Airborne IASI Validation Experiment (JAIVEx) was conducted during April 2007 mainly for validation of the IASI on the MetOp satellite. IASI possesses an ultra-spectral resolution of 0.25/cm and a spectral coverage from 645 to 2760/cm. Ultra-spectral resolution infrared spectral radiance obtained from near nadir observations provide atmospheric, surface, and cloud property information. An advanced retrieval algorithm with a fast radiative transfer model, including cloud effects, is used for atmospheric profile and cloud parameter retrieval. This physical inversion scheme has been developed, dealing with cloudy as well as cloud-free radiance observed with ultraspectral infrared sounders, to simultaneously retrieve surface, atmospheric thermodynamic, and cloud microphysical parameters. A fast radiative transfer model, which applies to the cloud-free and/or clouded atmosphere, is used for atmospheric profile and cloud parameter retrieval. A one-dimensional (1-d) variational multi-variable inversion solution is used to improve an iterative background state defined by an eigenvector-regression-retrieval. The solution is iterated in order to account for non-linearity in the 1-d variational solution. It is shown that relatively accurate temperature and moisture retrievals are achieved below optically thin clouds. For optically thick clouds, accurate temperature and moisture profiles down to cloud top level are obtained. For both optically thin and thick cloud situations, the cloud top height can be retrieved with relatively high accuracy (i.e., error < 1 km). Preliminary retrievals of atmospheric soundings, surface properties, and cloud optical/microphysical properties with the IASI observations are obtained and presented. These retrievals will be further inter-compared with those obtained from airborne FTS system, such as the NPOESS Airborne Sounder Testbed - Interferometer (NAST-I), dedicated dropsondes, radiosondes, and ground based Raman Lidar. The capabilities of satellite ultra-spectral sounder such as the IASI are investigated indicating a high vertical structure of atmosphere is retrieved.

Zhou, Daniel K.↗
NASA NTRS2015

Remote Sensing of Cloud Top Heights Using the Research Scanning Polarimeter

Clouds cover roughly two thirds of the globe and act as an important regulator of Earth's radiation budget. Of these, multilayered clouds occur about half of the time and are predominantly two-layered. Changes in cloud top height (CTH) have been predicted by models to have a globally averaged positive feedback, however observational changes in CTH have shown uncertain results. Additional CTH observations are necessary to better and quantify the effect. Improved CTH observations will also allow for improved sub-grid parameterizations in large-scale models and accurate CTH information is important when studying variations in freezing point and cloud microphysics. NASA's airborne Research Scanning Polarimeter (RSP) is able to measure cloud top height using a novel multi-angular contrast approach. RSP scans along the aircraft track and obtains measurements at 152 viewing angles at any aircraft location. The approach presented here aggregates measurements from multiple scans to a single location at cloud altitude using a correlation function designed to identify the location-distinct features in each scan. During NASAs SEAC4RS air campaign, the RSP was mounted on the ER-2 aircraft along with the Cloud Physics Lidar (CPL), which made simultaneous measurements of CTH. The RSPs unique method of determining CTH is presented. The capabilities of using single and combinations of channels within the approach are investigated. A detailed comparison of RSP retrieved CTHs with those of CPL reveal the accuracy of the approach. Results indicate a strong ability for the RSP to accurately identify cloud heights. Interestingly, the analysis reveals an ability for the approach to identify multiple cloud layers in a single scene and estimate the CTH of each layer. Capabilities and limitations of identifying single and multiple cloud layers heights are explored. Special focus is given to sources of error in the method including optically thin clouds, physically thick clouds, multi-layered clouds as well as cloud phase. When determining multi-layered CTHs, limits on the upper clouds opacity are assessed.

Cloud height indicators↗
DOE OSTI2022

Enhancing Convection Parameterization for Next Generation E3SM (Final Technical Report)

This technical report summarizes the achievements during the project period. The general goal of the project is to enhance the representation of atmospheric deep convection in the DOE global climate model E3SM. By implementing a stochastic convection scheme into E3SM, we improved the simulation of precipitation intensity and frequency. As a result, it has a profound impact on the simulation of other fields in the model, including aerosol scavenging by precipitation and aerosol radiative effects. We also implemented a convective cloud microphysics scheme into E3SMv2 to represent more accurately the interaction between convection and grid-scale clouds. An extensive analysis of model simulations as part of the Next Generation Development (NGD) convection scheme assessment project found that including the convective microphysics scheme improved the simulation of Madden-Julian oscillations (MJO) in the model. To make convective parameterization schemes more scale-aware as the GCM resolution increases, we analyzed the output from cloud-resolving model (CRM) simulations of both organized and unorganized convection by coarse-graining the CRM data to different GCM resolutions. Using a novel approach to modify the convective closure, we demonstrated that the convection scheme used in E3SM (ZM scheme) can be made scale-aware.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Lagrangian and Eulerian Supersaturation Statistics in Turbulent Cloudy Rayleigh–Bénard Convection: Applications for LES Subgrid Modeling

Abstract Turbulent fluctuations of scalar and velocity fields are critical for cloud microphysical processes, e.g., droplet activation and size distribution evolution, and can therefore influence cloud radiative forcing and precipitation formation. Lagrangian and Eulerian water vapor, temperature, and supersaturation statistics are investigated in direct numerical simulations (DNS) of turbulent Rayleigh–Bénard convection in the Pi Convection Cloud Chamber to provide a foundation for parameterizing subgrid-scale fluctuations in atmospheric models. A subgrid model for water vapor and temperature variances and covariance and supersaturation variance is proposed, valid for both clear and cloudy conditions. Evaluation of phase change contributions through an a priori test using DNS data shows good performance of the model. Supersaturation is a nonlinear function of temperature and water vapor, and relative external fluxes of water vapor and heat (e.g., during entrainment-mixing and phase change) influence turbulent supersaturation fluctuations. Although supersaturation has autocorrelation and structure functions similar to the independent scalars (temperature and water vapor), the autocorrelation time scale of supersaturation differs. Relative scalar fluxes in DNS without cloud make supersaturation PDFs less skewed than the adiabatic case, where they are highly negatively skewed. However, droplet condensation changes the PDF shape response: it becomes positively skewed for the adiabatic case and negatively skewed when the sidewall relative fluxes are large. Condensation also increases correlations between water vapor and temperature in the presence of relative scalar fluxes but decreases correlations for the adiabatic case. These changes in correlation suppress supersaturation variability for the nonadiabatic cases and increase it for the adiabatic case. Implications of this work for subgrid microphysics modeling using a Lagrangian stochastic scheme are also discussed.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2017

Challenges for Cloud Modeling in the Context of Aerosol–Cloud–Precipitation Interactions

The International Cloud Modeling Workshop (CMW) has been a longstanding tradition in the cloud microphysics modeling community and is typically held the week prior to the International Conference on Clouds and Precipitation (ICCP). For the Ninth CMW, more than 40 participants from 10 countries convened at the Met Office in Exeter, United Kingdom. The workshop included 4 detailed case studies (described in more detail below) rooted in recent field campaigns. The overarching objective of these cases was to utilize new observations to better understand inter-model differences and model deficiencies, explore new modeling techniques, and gain physical insight into the behavior of clouds. As was the case at the Eighth CMW, there was a general theme of understanding the role of aerosol impacts in the context of cloud-precipitation interactions. However, an additional objective was the focal point of several cases at the most recent workshop: microphysical-dynamical interactions. Many of the cases focused less on idealized small-domain simulations (as was the general focus of previous workshops) and more on large-scale nested configurations examining effects at various scales.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Warm-phase microphysical evolution in large-eddy simulations of tropical cumulus congestus: evaluating drop size distribution evolution using polarimetry retrievals, in situ measurements, and a thermal-based framework

Owing to uncertainties in convective microphysics processes, improving parameterizations in Earth system models (ESMs) can benefit from observationally constrained cases suitable for scaling between cloud-resolving models and ESMs. We propose a benchmark large-eddy simulation (LES) cumulus congestus case study from the NASA Cloud, Aerosol, and Monsoon Processes Philippines Experiment (CAMP 2 Ex) for evaluating and improving ESMs in single-column model (SCM) mode. We seek observational constraints using novel polarimetric retrievals and in situ cloud microphysics measurements. Simulations using bulk and bin microphysics initialized with observed aerosol profiles are compared to cloud-top retrievals of cloud droplet effective radius (R eff ), effective variance (ν eff ), and number concentration (N d ) from the airborne Research Scanning Polarimeter (RSP). Both schemes reproduce characteristics of cloud-top N d and R eff that increase and decrease with altitude, respectively. Cloud-top N d is low-biased relative to RSP retrievals in both schemes, potentially due to limitations in both simulations and retrieval assumptions. Cloud-top R eff is low-biased in the bulk scheme but reasonably reproduced by the bin scheme. Profiles of N d and R eff are sensitive to the collision–coalescence process and the vertical variation in aerosol size distribution. Comparison of simulated and in situ droplet size distributions (DSDs) shows that, to first order, integrated moments are always sensitive to sizes < ~ 30 µm and can also be sensitive to larger sizes if the DSDs are sufficiently broad, with implications for the assumed maximum observed size retrieved by the RSP. The bin scheme captures the observed extended tail of the DSD, while the bulk scheme is unable to due to parametric constraints. Differences in expected relationships between in situ measurements of cloud cores and cloud-top retrievals by RSP demonstrate difficulty in constraining well the case presented herein. Finally, a thermal-tracking framework demonstrates that the dilution of N d throughout a thermal's lifetime is heavily determined by collision–coalescence and the height-varying aerosol distribution and that, in the absence of these, the impact of entrainment on diluting N d is largely offset by secondary activation. Implications for evaluating warm-phase convective microphysics schemes in ESMs and translating results for use on global, space-based polarimetry platforms are discussed.

Stanford, McKenna Wallace [Columbia Univ., New Yor↗
DOE OSTI2015

Advancing Models and Evaluation of Cumulus, Climate and Aerosol Interactions

This project was successfully able to meet its’ goals, but faced some serious challenges due to personnel issues. Nonetheless, it was largely successful. The Project Objectives were as follows: 1. Develop a unified representation of stratifom and cumulus cloud microphysics for NCAR/DOE global community models. 2. Examine the effects of aerosols on clouds and their impact on precipitation in stratiform and cumulus clouds. We will also explore the effects of clouds and precipitation on aerosols. 3. Test these new formulations using advanced evaluation techniques and observations and release

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1988

Physical processes in polar stratospheric ice clouds

A one dimensional model of cloud microphysics was used to simulate the formation and evolution of polar stratospheric ice clouds. Some of the processes which are included in the model are outlined. It is found that the clouds must undergo preferential nucleation upon the existing aerosols just as do tropospheric cirrus clouds. Therefore, there is an energy barrier between stratospheric nitric acid particles and ice particles implying that nitric acid does not form a continuous set of solutions between the trihydrate and ice. The Kelvin barrier is not significant in controlling the rate of formation of ice particles. It was found that the cloud properties are sensitive to the rate at which the air parcels cool. In wave clouds, with cooling rates of hundreds of degrees per day, most of the existing aerosols nucleate and become ice particles. Such clouds have particles with sizes on the order of a few microns, optical depths on order of unity and are probably not efficient at removing materials from the stratosphere. In clouds which form with cooling rates of a few degrees per day or less, only a small fraction of the aerosols become cloud particles. In such clouds the particle radius is larger than 10 microns, the optical depths are low and water vapor is efficiently removed. Seasonal simulations show that the lowest water vapor mixing ratio is determined by the lowest temperature reached, and that the time when clouds disappear is controlled by the time when temperatures begin to rise above the minimum values.

Toon, Owen B.↗
NASA NTRS1989

Physical processes in polar stratospheric ice clouds

The formulation and evolution of polar stratospheric ice clouds are simulated using a one-dimensional model of cloud microphysics. It is found that the optical thickness and particle size of ice clouds depend on the cooling rate of the air in which the cloud formed. It is necessary that there be an energy barrier to ice nucleation upon the preexisting aerosols in order to account for the cooling rate dependence of the cloud properties.

Toon, Owen B.↗
NASA NTRS2010

Hyperspectrally-Resolved Surface Emissivity Derived Under Optically Thin Clouds

Surface spectral emissivity derived from current and future satellites can and will reveal critical information about the Earth s ecosystem and land surface type properties, which can be utilized as a means of long-term monitoring of global environment and climate change. Hyperspectrally-resolved surface emissivities are derived with an algorithm utilizes a combined fast radiative transfer model (RTM) with a molecular RTM and a cloud RTM accounting for both atmospheric absorption and cloud absorption/scattering. Clouds are automatically detected and cloud microphysical parameters are retrieved; and emissivity is retrieved under clear and optically thin cloud conditions. This technique separates surface emissivity from skin temperature by representing the emissivity spectrum with eigenvectors derived from a laboratory measured emissivity database; in other words, using the constraint as a means for the emissivity to vary smoothly across atmospheric absorption lines. Here we present the emissivity derived under optically thin clouds in comparison with that under clear conditions.

Zhou, Daniel K.↗
NASA NTRSDate not supplied

TPSAS-NF1676L-10888-DND

Hyperspectrally-resolved surface emissivities are derived with an algorithm utilizes a combined fast radiative transfer model (RTM) with a molecular RTM and a cloud RTM accounting for both atmospheric absorption and cloud absorption/scattering. Clouds are automatically detected and cloud microphysical parameters are retrieved; and emissivity is retrieved under clear and optically thin cloud conditions. The retrieval technique separates surface emissivity from skin temperature by representing the emissivity spectrum with eigenvectors derived from a laboratory measured emissivity database. Global land emissivities retrieved under the optically thin clouds are investigated by means of their accuracy in comparison with that under cloud-free conditions. Here we present the emissivity derived under optically thin clouds, their accuracy, and the inter-comparison with that under clear conditions.

Daniel K Zhou↗
DOE OSTI2025

Improving the Parameterization of Cloud and Rain Microphysics in E3SM using Novel Observationally-Constrained Bayesian Approach (Final Technical Report)

In this project, we sought to develop new cloud and rain microphysics frameworks within the Energy Exascale Earth System Model (E3SM). This work encompassed two primary avenues of research: 1) Further development of a Bayesian-based scheme called BOSS (Bayesian Observationally-constrained Statistical-physical Scheme) to represent cloud and rain microphysics, testing it in realistic high-resolution cloud models, and implementing it in E3SM; 2) Development of a methodology utilizing machine learning to enable computationally tractable use of tractable use of Markov chain Monte Carlo sampling for Bayesian parameter estimation in Earth system and cloud models. In this project, we adapted the BOSS microphysics scheme, originally formulated for rain-only, to include all liquid-phase microphysical processes for cloud and rain, in particular the processes that mediate between these two categories, for example the conversion from cloud to rain through collision and coalescence of drops. We constrained the scheme via comparison and testing against a detailed model that explicitly represents the evolution of cloud and rain particles, called a bin microphysics scheme.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1994

Parameterization of bulk condensation in numerical cloud models

The accuracy of the moist saturation adjustment scheme has been evaluated using a three-dimensional explicit microphysical cloud model. It was found that the error in saturation adjustment depends strongly on the Cloud Condensation Nucleii (CCN) concentration in the ambient atmosphere. The scheme provides rather accurate results in the case where a sufficiently large number of CCN (on the order of several hundred per cubic centimeter) is available. However, under conditions typical of marine stratocumulus cloud layers with low CCN concentration, the error in the amounts of condensed water vapor and released latent heat may be as large as 40%-50%. A revision of the saturation adjustment scheme is devised that employs the CCN concentration, dynamical supersaturation, and cloud water content as additional variables in the calculation of the condensation rate. The revised condensation model reduced the error in maximum updraft and cloud water content in the climatically significant case of marine stratocumulus cloud layers by an order of magnitude.

Kogan, Yefim L.↗
NASA NTRS2004

Microphysical Timescales in Clouds and their Application in Cloud-Resolving Modeling

Computational phenomena (i.e., spurious supersaturation and negative mixing ratio of cloud water) usually exist in cloud-resolving models when the time step for explicit integration is larger than a microphysical timescale in clouds. In this paper, the microphysical timescales in clouds are studied, showing that the timescale of water vapor condensation (or cloud water evaporation) is smaller than 10 s - the order of a typical time step for cloud-resolving models. To avoid spurious computational phenomena in cloud-resolving modeling, it is suggested that moist entropy be used as a prognostic thermodynamic variable, and temperature be diagnosed from that and other prognostic variables. A simple numerical model with moist entropy as a prognostic variable, for example, is presented to show that spurious computational phenomena are removed when moist entropy is used as a prognostic variable.

Zeng, Xi-Ping↗
NASA NTRS2021

Modeling the Radiative Effect on Microphysics in Cirrus Clouds against Satellite Observations

The radiative effect on microphysics 23 (REM) plays an important role in the dew/frost formation near the surface. How REM impacts cirrus clouds is investigated in this paper, using bin microphysical model simulations and coincident data of the CloudSat and Global Precipitation Measurement (GPM) satellites. REM affects ice crystal spectrum with two types: radiative cooling and warming. Radiative cooling, as predicted by the bin model simulations, favors the formation of horizontally oriented ice crystals (HOICs), but radiative warming does not. Hence, a test of REM can be transformed to a test of HOICs, because HOICs can be measured by the microwave polarization observations of the GPM Microwave Imager (GMI) at 166 GHz. To analyze the GMI data for their HOIC distribution, clouds are sorted into four groups with different optical depth and altitude, based on the radiative cooling/warming ratio (or eta) computed with satellite-retrieved ice water content. Their HOIC distributions (e.g., the mid-level thick clouds have more HOICs than the high-level ones) agree well with those predicted by the bin model simulations. The general agreement between the GMI observations and bin model simulations suggests that REM is common in cirrus clouds and impacts cirrus clouds significantly.

microphysics↗
DOE OSTI2024

Evaluation of Physical Microphysical Property Retrieval Algorithms During the 2020 IMPACTS Field Campaign

The NASA Investigation of Microphysics and Precipitation for Atlantic Coast Threatening Snowstorms (IMPACTS) field campaign provides high-quality, high-altitude aircraft lidar (532 nm), radar (W-band) and in-cloud microphysical aircraft data taken during wintertime storm events impacting the United States. This study evaluates two mass-dimensional relationships (Brown and Francis (1995, BF95); Heymsfield (2014, H14) and two lidar-radar microphysical retrieval algorithms (Cloudsat and CALIPSO Ice Cloud Property Product (2C-ICE); VarPy (a variational method derived from the satellite lidar-radar data community)) to estimate aircraft-retrieved volume extinction coefficient (σ), ice water content (IWC), and effective radius (r e ) during the 2020 IMPACTS deployment. BF95 and H14 have a close 1:1 correlation (R 2 = 0.98) with in-situ observations of σ. However, only BF95 displays a linear, consistent, and almost temperature-independent low bias for IWC and r e , which likely arises from the environmental conditions used to determine each. Unlike the field-campaign-derived BF95 and H14 relationships, VarPy and 2C-ICE directly ingest the aircraft-based lidar and radar data to simulate σ, IWC, and r e . For all three microphysical parameters, VarPy and 2C-ICE retrieval errors became notably more pronounced around the dendritic growth zone (-15°C to -10°C) and near freezing (≥-5°C), which suggests that both algorithms experience difficulty addressing riming and aggregation processes and with larger particles (dendrites and plates) due in part to their simplified ice particle assumptions. However, the mean-melt diameter ice-particle assumption did yield more accurate IWC estimates, which led to slightly better overall results for VarPy.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2015

Incorporating an advanced aerosol activation parameterization into WRF-CAM5: Model evaluation and parameterization intercomparison

Aerosol activation into cloud droplets is an important process that governs aerosol indirect effects. The advanced treatment of aerosol activation by Fountoukis and Nenes (2005) and its recent updates, collectively called the FN series, have been incorporated into a newly developed regional coupled climate-air quality model based on the Weather Research and Forecasting model with the physics package of the Community Atmosphere Model version 5 (WRF-CAM5) to simulate aerosol-cloud interactions in both resolved and convective clouds. The model is applied to East Asia for two full years of 2005 and 2010. A comprehensive model evaluation is performed for model predictions of meteorological, radiative, and cloud variables, chemical concentrations, and column mass abundances against satellite data and surface observations from air quality monitoring sites across East Asia. The model performs overall well for major meteorological variables including near-surface temperature, specific humidity, wind speed, precipitation, cloud fraction, precipitable water, downward shortwave and longwave radiation, and column mass abundances of CO, SO 2 , NO 2 , HCHO, and O 3 in terms of both magnitudes and spatial distributions. Larger biases exist in the predictions of surface concentrations of CO and NO x at all sites and SO 2 , O 3 , PM 2.5 , and PM 10 concentrations at some sites, aerosol optical depth, cloud condensation nuclei over ocean, cloud droplet number concentration (CDNC), cloud liquid and ice water path, and cloud optical thickness. Compared with the default Abdul-Razzack Ghan (2000) parameterization, simulations with the FN series produce ~107–113% higher CDNC, with half of the difference attributable to the higher aerosol activation fraction by the FN series and the remaining half due to feedbacks in subsequent cloud microphysical processes. With the higher CDNC, the FN series are more skillful in simulating cloud water path, cloud optical thickness, downward shortwave radiation, shortwave cloud forcing, and precipitation. Here, the model evaluation identifies several areas of improvements including emissions and their vertical allocation as well as model formulations such as aerosol formation, cloud droplet nucleation, and ice nucleation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Computational Modeling of Atmospheric Processes at Texas Southern University

Texas Southern University (TSU) is strengthening its research program in atmospheric chemistry and physics with a climate science emphasis by leveraging partnerships with the U.S. Department of Energy’s Atmospheric Radiation Measurement (ARM) Facility, Brookhaven National Laboratory (BNL), and the Tracking Aerosol Convection Interactions ExpeRiment (TRACER). This RDPP-supported program focuses on secondary organic aerosols (SOAs) and reactive atmospheric species that influence cloud formation, precipitation processes, and radiative forcing. SOAs play a critical role in cloud microphysics and Earth’s energy balance, yet the chemical and physical mechanisms governing SOA–cloud interactions remain a significant source of uncertainty in predictive climate models. Through computational modeling, observational data analysis, and national laboratory collaboration, this program develops a skilled cohort of students trained in atmospheric science, environmental data analysis, and climate-relevant modeling. These research experiences build technical competencies that are transferable to careers in government laboratories, academia, and industry. By engaging students from historically underrepresented communities in high-impact climate research, TSU expands participation in the atmospheric sciences workforce while contributing meaningful scientific insights to DOE-supported ARM research activities. This partnership strengthens national capacity in climate science and supports the development of the next generation of atmospheric researchers.

54 ENVIRONMENTAL SCIENCES↗