Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cloud ice”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

AERO-MAP: a data compilation and modeling approach to understand spatial variability in fine- and coarse-mode aerosol composition

Abstract. Aerosol particles are an important part of the Earth climate system, and their concentrations are spatially and temporally heterogeneous, as well as being variable in size and composition. Particles can interact with incoming solar radiation and outgoing longwave radiation, change cloud properties, affect photochemistry, impact surface air quality, change the albedo of snow and ice, and modulate carbon dioxide uptake by the land and ocean. High particulate matter concentrations at the surface represent an important public health hazard. There are substantial data sets describing aerosol particles in the literature or in public health databases, but they have not been compiled for easy use by the climate and air quality modeling community. Here, we present a new compilation of PM2.5 and PM10 surface observations, including measurements of aerosol composition, focusing on the spatial variability across different observational stations. Climate modelers are constantly looking for multiple independent lines of evidence to verify their models, and in situ surface concentration measurements, taken at the level of human settlement, present a valuable source of information about aerosols and their human impacts complementarily to the column averages or integrals often retrieved from satellites. We demonstrate a method for comparing the data sets to outputs from global climate models that are the basis for projections of future climate and large-scale aerosol transport patterns that influence local air quality. Annual trends and seasonal cycles are discussed briefly and are included in the compilation. Overall, most of the planet or even the land fraction does not have sufficient observations of surface concentrations – and, especially, particle composition – to characterize and understand the current distribution of particles. Climate models without ammonium nitrate aerosols omit ∼ 10 % of the globally averaged surface concentration of aerosol particles in both PM2.5 and PM10 size fractions, with up to 50 % of the surface concentrations not being included in some regions. In these regions, climate model aerosol forcing projections are likely to be incorrect as they do not include important trends in short-lived climate forcers.

Mahowald, Natalie M. (ORCID:000000022873997X)↗
DOE OSTI2023

Subsetted model output for aerosol-related variables from a LASSO-CACTI WRF simulation

Aerosol-related model output from a Weather Research and Forecasting (WRF) simulation from the Large-Eddy Simulation (LES) Atmospheric Radiation Measurement (ARM) Symbiotic Simulation and Observation (LASSO) deep-convection scenario for the Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign. The LASSO-CACTI simulations span grid spacings from 7.5 km to 100 m through the use of four nested domains, labeled d1 through d4. The simulations are of convection near the Sierras de Córdoba mountain range, roughly centered on the ARM Mobile Facility. More information can be found at https://www.arm.gov/capabilities/modeling/lasso. This version of the output is a collection of variables subsetted from the raw WRF output to reduce the file overhead for users not needing the full raw dataset. The subset files are in netCDF format with the height-based variables on the raw, model eta levels. The aerosol properties are consistent with the Thompson aerosol-aware cloud microphysics scheme where the simulated aerosol are proxies for representative “water friendly” and “ice friendly” aerosol.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Toward Better Understanding of Microphysical Processes and Resulting Precipitation Physics: A Merger Of Observations and Cloud Models (Final Report)

A large database of global disdrometer observations and a diverse set of simulations from the Regional Atmospheric Modeling System (RAMS) were compared using principal component analysis (PCA) in order to better understand warm and ice-based precipitation processes. The analysis demonstrated that six distinct precipitation groups (PGs) with common characteristics were revealed in both the observations and model simulations. These PGs were defined by similar co-variability of rain parameters. However, the model showed large concentrations of drops with a given size compared to the observations. Detailed investigations determined the parameterization of drop breakup was forcing the drops to an equilibrium size with a stronger constraint than was indicated by the observations. A series of sensitivity studies permutating the rain shape parameter in the RAMS 2-moment bulk scheme demonstrated how the assumed shape of the rain distribution influences the microphysics as well as precipitation characteristics. Results were compared to the same simulations performed with a bin microphysics scheme where the rain shape parameter is freely evolving. In the bin scheme, a wide range of shape parameters were found, with horizontal and vertical variability, in addition to being a function of storm lifetime. The results of this study highlight the limitations of a fixed assumed rain distribution in 2-moment microphysics schemes. Model simulations were used to probe the microphysical origins of the six PGs. Rain budgets from a supercell case showed that several of the groups hypothesized to be associated with strong ice microphysical processes had significant contributions from melting hail, but the complexity of ice and warm-rain processes in the supercell precluded definitive determination of microphysical origins for many of the PGs. A case study from the Mid-latitude Continental Convection and Clouds Experiment (MC3E) compared the model PGs to disdrometer observations, and demonstrated the spatial and temporal variability of the PGs which is not possible from disdrometer point measurements alone. The analyses performed during this project demonstrated how statistical analysis can provide a robust method for comparing model simulations and observations, which ultimately resulted identification of limitations in some current microphysics parameterizations as well as insights into precipitation variability which ultimately benefits both observations and modeling efforts.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Aerosol Hygroscopic Growth, Mixing State, and Cloud Condensation Nuclei Activity during TRACER (Field Campaign Report)

Convective clouds play a critical role in the Earth’s climate system. Recent research has shown that a realistic representation of convective processes is critical to constraining climate sensitivity in global climate models. Theoretical and modeling studies showed that aerosols could have strong dynamic feedback to convection in warm and humid environments through enhancing ice-related processes and condensational growth. A few observation-based studies also suggested the influence of aerosols on convective cloud and precipitation properties. However, robust observational quantification of an aerosol effect on convective clouds isolated from other factors remains elusive. Understanding the impact of aerosol on convective clouds requires knowledge of the cloud condensation nuclei (CCN) spectrum, which represents the number of particles that uptake water and form cloud droplets as a function of supersaturation. The water uptake by aerosol is also of critical importance for the direct interaction of aerosol with radiation (i.e., aerosol direct effect) due to light scattering and absorption by aerosol. While both droplet activation under supersaturated conditions (i.e., relative humidity RH > 100%) and the hygroscopic growth under sub-saturated conditions (i.e., RH < 100%) are strongly influenced by particle hygroscopicity, the thermodynamic regimes and measurement methods are quite different. Aerosol particles, especially organic particles, can exhibit higher hygroscopicity for droplet activation than that for hygroscopic growth. In the subsaturated regime, the hygroscopicity of organic particles can also vary strongly with RH. However, global climate models usually treat organic species in aerosols with a constant hygroscopicity, potentially introducing substantial uncertainties in the quantification of aerosol radiative effects.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Mini Micropulse Lidar measurements in vertical and scanning modes

The Atmospheric Radiation Measurement (ARM) program operates ten Sigma Space (currently Droplet Measurement Technologies/DMT) micropulse lidar systems (MPL-4B-IDS/POL-FS series), which detect the backscattered light in two orthogonal linear polarization channels allowing to distinguish between spherical (e.g. water) and non-spherical (e.g. ice) scattering particles. The ARM MPLs have been providing valuable measurements to the aerosol and cloud research community for well over a decade. DMT&rsquo;s Mini-Micropulse lidar (MiniMPL) is a compact version of the standard MPL. It reduces the power-aperture product to minimize cost, size, weight, power requirements and has all the electronics integrated with optics in a single box. Although as a result, it has a lower detection range than the MPL, limiting the measurements to the troposphere, its performance is promised to match that of the standard MPL within the troposphere. The MiniMPL weighs 13 kg, and the complete system, consisting of an optical transceiver and a laptop running the data acquisition and post-processing software, fits in a storm case, allowing its transport on domestic or international flights. This can be especially valuable for short field campaigns or Intensive Operational Periods, where time is of the essence when replacing a faulty instrument. In addition, the scanning polarization lidar capability (MiniMPL-SCAN option) could be of great interest for satisfying ARM measurement needs for certain research topics related to clouds and precipitation. To evaluate its full potential in comparison with co-located remote sensing instruments including the ARM MPL-4B-IDS/POL-FS at SGP, a miniMPL was hosted at the ARM Southern Great Plains (SGP) mega-site in 2020 for approximately 3 months. During this time the miniMPL was tested in both vertical sampling and scanning modes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Do Arctic mixed-phase clouds sometimes dissipate due to insufficient aerosol? Evidence from comparisons between observations and idealized simulations

Abstract. Mixed-phase clouds are ubiquitous in the Arctic. These clouds can persist for days and dissipate in a matter of hours. It is sometimes unknown what causes this sudden dissipation, but aerosol–cloud interactions may be involved. Arctic aerosol concentrations can be low enough to affect cloud formation and structure, and it has been hypothesized that, in some instances, concentrations can drop below some critical value needed to maintain a cloud. We use observations from a Department of Energy ARM site on the northern slope of Alaska at Oliktok Point (OLI), the Arctic Summer Cloud Ocean Study (ASCOS) field campaign in the high Arctic Ocean, and the Integrated Characterisation of Energy, Clouds, Atmospheric state, and Precipitation at Summit – Aerosol Cloud Experiment (ICECAPS-ACE) project at the NSF (National Science Foundation) Summit Station in Greenland (SMT) to identify one case per site where Arctic boundary layer clouds dissipated coincidentally with a decrease in surface aerosol concentrations. These cases are used to initialize idealized large eddy simulations (LESs) in which aerosol concentrations are held constant until, at a specified time, all aerosols are removed instantaneously – effectively creating an extreme case of aerosol-limited dissipation which represents the fastest a cloud could possibly dissipate via this process. These LESs are compared against the observed data to determine whether cases could, potentially, be dissipating due to insufficient aerosol. The OLI case's observed liquid water path (LWP) dissipated faster than its simulation, indicating that other processes are likely the primary drivers of the dissipation. The ASCOS and SMT observed LWP dissipated at similar rates to their respective simulations, suggesting that aerosol-limited dissipation may be occurring in these instances. We also find that the microphysical response to this extreme aerosol forcing depends greatly on the specific case being simulated. Cases with drizzling liquid layers are simulated to dissipate by accelerating precipitation when aerosol is removed while the case with a non-drizzling liquid layer dissipates quickly, possibly glaciating via the Wegener–Bergeron–Findeisen (WBF) process. The non-drizzling case is also more sensitive to ice-nucleating particle (INP) concentrations than the drizzling cases. Overall, the simulations suggest that aerosol-limited cloud dissipation in the Arctic is plausible and that there are at least two microphysical pathways by which aerosol-limited dissipation can occur.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Remote-sensing detectability of airborne Arctic dust

Remote-sensing (RS)-based estimates of Arctic dust are oftentimes overestimated due to a failure in separating out the dust contribution from that of spatially homogeneous clouds or low-altitude cloud-like plumes. A variety of illustrations are given with a particular emphasis on questionable claims of using brightness temperature differences (BTDs) as a signature indicator of Arctic dust transported from mid-latitude deserts or generated by local Arctic sources. While there is little dispute about the presence of both Asian and local dust across the Arctic, the direct RS detectability of airborne dust, as ascribed to satellite (MODIS and AVHRR) measurements of significantly negative brightness temperature differences at 11 and 12 µm (BTD 11–12 ), has been misrepresented in certain cases. While it is difficult to account for all examples of strongly negative BTD 11–12 values in the Arctic, it is unlikely that airborne dust plays a significant role. One much more likely contributor would be water clouds in the Arctic inversion layer. The RS detectability of the impact of Arctic dust (notably due to Arctic dust from local sources) can, however, be of significance. Sustained dust deposition can substantially decrease (visible to shortwave IR) snow and ice reflectance albedo (pan-chromatic reflectance) and the signal measured by satellite sensors. Significantly negative BTD 11–12 values would, however, only represent a limited area near the drainage basin sources according to our event-level case studies. The enhanced ice-nucleating particle (INP) role of local Arctic dust can, for example, induce significant changes in the properties of low-level mixed-phase clouds (cloud optical depth changes <~ 1) that can readily be detected by active and passive RS instruments. It is critical that the distinction between the RS detectability of airborne Arctic dust versus the RS detectability of the impacts of that dust be understood if we are to appropriately parameterize, for example, the radiative forcing influence of dust in this climate-sensitive region.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Evaluation of the Rapid Refresh Numerical Weather Prediction Model over Arctic Alaska

Abstract Despite a need for accurate weather forecasts for societal and economic interests in the U.S. Arctic, thorough evaluations of operational numerical weather prediction in the region have been limited. In particular, the Rapid Refresh Model (RAP), which plays a key role in short-term forecasting and decision-making, has seen very limited assessment in northern Alaska, with most evaluation efforts focused on lower latitudes. In the present study, we verify forecasts from version 4 of the RAP against radiosonde, surface meteorological, and radiative flux observations from two Arctic sites on the northern Alaskan coastline, with a focus on boundary layer thermodynamic and dynamic biases, model representation of surface inversions, and cloud characteristics. We find persistent seasonal thermodynamic biases near the surface that vary with wind direction, and may be related to the RAP’s handling of sea ice and ocean interactions. These biases seem to have diminished in the latest version of the RAP (version 5), which includes refined handling of sea ice, among other improvements. In addition, we find that despite capturing boundary layer temperature profiles well overall, the RAP struggles to consistently represent strong, shallow surface inversions. Further, while the RAP seems to forecast the presence of clouds accurately in most cases, there are errors in the simulated characteristics of these clouds, which we hypothesize may be related to the RAP’s treatment of mixed-phase clouds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Model-observation discrepancies in Arctic moisture intrusions: causes and pathways for improved simulation

Arctic moisture intrusions (MIs), narrow filaments of strong moisture transport, are key drivers of poleward moisture flux and Arctic weather extremes, yet their representation in climate models is poorly understood. Using a new Arctic MI detection algorithm, we document persistent biases across three CMIP generations (CMIP3–CMIP6): models overestimate MI occurrence over the Pacific sector and underestimate it over the Atlantic sector. These errors stem from misrepresented midlatitude westerly jets, with an equatorward North Atlantic jet associated with too few Atlantic MIs, and a poleward, weakened North Pacific jet linked to too many Pacific MIs. Experiments that correct sea surface temperature and sea ice concentration biases and increase atmospheric resolution improve jet structure and MI statistics, while a cloud-locking simulation indicates that better high-frequency cloud–radiation–circulation interactions can yield further gains. Our results clarify pathways to reducing long-standing MI and jet biases, providing guidance for improving simulations of Arctic and midlatitude climate.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Polarimetric Radar Characteristics of Simulated and Observed Intense Convective Cores for a Midlatitude Continental and Tropical Maritime Environment

This study contrasts midlatitude continental and tropical maritime deep convective cores using polarimetric radar observables and retrievals from selected deep convection episodes during the MC3E and TWPICE field campaigns. The continental convective cores produce stronger radar reflectivities throughout the profiles, while maritime convective cores produce more positive differential reflectivity Z dr and larger specific differential phase K dp above the melting level. Hydrometeor identification retrievals revealed the presence of large fractions of rimed ice particles (snow aggregates) in the continental (maritime) convective cores, consistent with the Z dr and K dp observations. The regional cloud-resolving model simulations with bulk and size-resolved bin microphysics are conducted for the selected cases, and the simulation outputs are converted into polarimetric radar signals and retrievals identical to the observational composites. Both the bulk and the bin microphysics reproduce realistic land and ocean (L-O) contrasts in reflectivity, polarimetric variables of rain drops, and hydrometeor profiles, but there are still large uncertainties in describing Z dr and K dp of ice crystals associated with the ice particle shapes/orientation assumptions. Sensitivity experiments are conducted by swapping background aerosols between the continental and maritime environments, revealing that background aerosols play a role in shaping the distinct L-O contrasts in radar reflectivity associated with raindrop sizes, in addition to the dominant role of background thermodynamics.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Long-Term Trends for Marine Sulfur Aerosol in the Alaskan Arctic and Relationships With Temperature

Marine aerosol plays a vital role in cloud-aerosol interactions during summer in the Arctic. The recent rise in temperature and decrease in sea ice extent have the potential to impact marine biogenic sources. Compounds like methanesulfonic acid (MSA) and non-sea-salt sulfate (nss-SO 4 2- ), oxidation products of dimethyl sulfide (DMS) emitted by marine primary producers, are likely to increase in concentration. Long-term studies are vital to understand these changes in marine sulfur aerosol and potential interactions with Arctic climate. Samples were collected over three summers at two coastal sites on the North Slope of Alaska (Utqiagvik and Oliktok Point). MSA concentrations followed previously reported seasonal trends, with evidence of high marine primary productivity influencing both sites. When added to an additional data set collected at Utqiagvik, an increase in MSA concentration of + 2.5% per year and an increase in nss-SO 4 2- of + 2.1% per year are observed for the summer season over the 20-year record (1998–2017). This study identifies ambient air temperature as a strong factor for MSA, likely related to a combination of interrelated factors including warmer sea surface temperature, reduced sea ice, and temperature-dependent chemical reactions. Analysis of individual particles at Oliktok Point, within the North Slope of Alaska oil fields, showed evidence of condensation of MSA onto anthropogenic particles, highlighting the connection between marine and oil field emissions and secondary organic aerosol. Finally, this study shows the continued importance of understanding MSA in the Arctic while highlighting the need for further research into its seasonal relationship with organic carbon.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

A review of coarse mineral dust in the Earth system

Mineral dust particles suspended in the atmosphere span more than three orders of magnitude in diameter, from <0.1 µm to more than 100 µm. This wide size range makes dust a unique aerosol species with the ability to interact with many aspects of the Earth system, including radiation, clouds, hydrology, atmospheric chemistry, and biogeochemistry. This review focuses on coarse and super-coarse dust aerosols, which we respectively define as dust particles with a diameter of 2.5–10 µm and 10–62.5 µm. We review several lines of observational evidence indicating that coarse and super-coarse dust particles are transported farther than previously expected and that the abundance of these particles is substantially underestimated in current global models. We synthesize previous studies that used observations, theories, and model simulations to highlight the impacts of coarse and super-coarse dust aerosols on the Earth system, including their effects on dust-radiation interactions, dust-cloud interactions, atmospheric chemistry, and biogeochemistry. Specifically, coarse and super-coarse dust aerosols produce a net positive direct radiative effect (warming) at the top of the atmosphere and can modify temperature and water vapor profiles, influencing the distribution of clouds and precipitation. In addition, coarse and super-coarse dust aerosols contribute a substantial fraction of ice-nucleating particles, especially at temperatures above –23 °C. They also contribute a substantial fraction to the available reactive surfaces for atmospheric processing and the dust deposition flux that impacts land and ocean biogeochemistry by supplying important nutrients such as iron and phosphorus. Furthermore, we examine several limitations in the representation of coarse and super-coarse dust aerosols in current model simulations and remote-sensing retrievals. Because these limitations substantially contribute to the uncertainties in simulating the abundance and impacts of coarse and super-coarse dust aerosols, we offer some recommendations to facilitate future studies. Overall, we conclude that an accurate representation of coarse and super-coarse properties is critical in understanding the impacts of dust aerosols on the Earth system.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Predictive Proxies of Present and Future Lightning in a Superparameterized Model

Abstract A superparameterized climate model is used to assess the global performance of several previously proposed proxies for lightning. In particular, predictors incorporating hydrometeor (ice, graupel) profiles and convective vertical velocities are compared to observations, then used to estimate changes in flash rates with global warming. The choice of microphysics parameterization is also investigated, with all predictors showing higher correlations with Lightning Imaging Sensor/Optical Transient Detector observations when using a 2‐moment scheme compared to a 1‐moment representation. All proxies generally agree in their response to warming over tropical land, with notable decreases in Africa, the Middle East, and northern South America, but disagree over oceans and the midlatitudes. The product of convective available potential energy and precipitation predicts increases over these latter areas, as do the 2‐moment ice‐based proxies, while those of the 1‐moment model tend to show decreases, highlighting the importance of cloud microphysics when using climate models to simulate lightning.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Cloud radiative effect dominates variabilities of surface energy budget in the dark Arctic

Climate models simulate a wide range of temperatures in the Arctic. Here we investigate one of the main drivers of changes in surface temperature: the net surface heat flux in the models. We show that in the winter months of the dark Arctic, there is a more than two-fold difference in the net surface heat fluxes among the models, and this difference is dominated by the downward infrared radiation from clouds. Owing to the small amount of water vapor in the winter Arctic, infrared radiation from clouds transmits more easily to the surface in the Arctic than at other latitudes, resulting in large cloud radiative effect at the surface. The dominant role of the cloud effect is also found in the transient variability of the net surface heat flux. Results demonstrate that accurate simulation of clouds is crucial for determining the net surface heat flux, which in turn affects surface temperature and sea ice properties in the Arctic.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Seasonal Variation of Dust Aerosol Vertical Distribution in Arctic Based on Polarized Micropulse Lidar Measurement

This study investigates the seasonal variation of dust aerosol vertical distribution using polarized Micropulse lidar (MPL) measurements at the Atmospheric Radiation Measurement (ARM) North Slope of Alaska (NSA) observatory from January 2013 to September 2017. For the first time, multi-year aerosol backscatter coefficients are retrieved at the ARM NSA site from MPL measurements and are consistent with co-located high spectral resolution lidar (HSRL) measurements. The high-quality aerosol backscatter coefficient retrievals are used to derive the particle depolarization ratio (PDR) at the wavelength of 532 nm, which is used to identify the presence of dust aerosols. The annual cycles of the vertical distributions of dust backscatter coefficient and PDR and dust aerosol optical depth (DAOD) show that aerosol loading has a maximum in late winter and early spring but a minimum in late summer and early autumn. Vertically, dust aerosol occurs in the entire troposphere in spring and winter and in the low and middle troposphere in summer and autumn. Because dust aerosols are effective ice nuclei, the seasonality of dust aerosol vertical distribution has important implications for the Arctic climate through aerosol–cloud–radiation interactions, primarily through impacting mixed-phase cloud processes.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Stochastic nucleation processes and substrate abundance explain time-dependent freezing in supercooled droplets

Atmospheric immersion freezing (IF), a heterogeneous ice nucleation process where an ice nucleating particle (INP) is immersed in supercooled water, is a dominant ice formation pathway impacting the hydrological cycle and climate. Implementation of IF derived from field and laboratory data in cloud and climate models is difficult due to the high variability in spatio-temporal scales, INP composition, and morphological complexity. We demonstrate that IF can be consistently described by a stochastic nucleation process accounting for uncertainties in the INP surface area. This approach accounts for time-dependent freezing, a wide range of surface areas and challenges phenomenological descriptions typically used to interpret IF. The results have an immediate impact on the current description, interpretation, and experiments of IF and its implementation in models. The findings are in accord with nucleation theory, and thus should hold for any supercooled liquid material that nucleates in contact with a substrate.

54 ENVIRONMENTAL SCIENCES↗