Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “chemical specificity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Pattern-enhanced Resonant Soft X-ray Scattering for Operando monitoring of electrochemical solid-liquid interfaces

Unveiling interfaces at sub-nanometer scales is essential for advancing the understanding of complex chemical transformations. However, characterizing solid-liquid interfaces with high dimensional sensitivity and temporal resolution remains challenging, due to their dynamic nature and inaccessibility by conventional probes. Here we present an approach, Pattern-enhanced Resonant Soft X-ray Scattering, to overcome the challenges. Rooted in a “sample-as-optics” philosophy, this technique utilizes precisely engineered line-grating nanopatterns to modulate near-field X-ray illumination, coherently enhancing scattering signals from the line-gratings. We implement the method using Ni line-grating nanopatterns in electrochemical water oxidation. The periodic nanostructures serve as diffractive optical elements to reveal the Ni oxidation gradients and structural dynamics at the electrode-electrolyte interfaces. Finite-element simulations corroborate the observed trends by modeling variations in compositions and structures during electrocatalysis. Through integrating advanced sample design with coherent wave nature of soft X-rays, our approach opens accessible pathways to operando exploring chemical evolution and sub-nanometer dimensional variations simultaneously in electrochemical systems. This non-destructive method is efficient and element-specific, making it valuable for probing chemical and dimensional dynamics with appropriate modeling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1971

The production rate of Al/26/ from target elements in the Bruderheim chondrite.

A specimen of the Bruderheim chondrite was subjected to magnetic and heavy-liquid mineral separation procedures, resulting in a number of chemically distinct samples. These samples were analyzed for cosmogenic Al(26) by nondestructive gamma-gamma coincidence counting. The observed Al(26) specific activities were correlated with the chemical composition of potential target elements by a weighted least-squares fitting technique. The calculated Al(26) production rates from Al, Si, S, Mg, and Ca are presented. Most meteorite classes are shown to have a distribution of observed Al(26) vs calculated Al(26) primarily between 0.80 and 1.10, with the only exception of the eucrites. Two Apollo 12 samples, from mean depths of 15-20 cm, have approximately 0.78 of the Al(26) activities calculated for their chemical composition. A depletion in Al(26) in lunar samples shielded from solar radiation is in accord with a reduced cosmic-ray flux near the earth's orbit, relative to that experienced by most meteorites.

Cressy, P. J., Jr.↗
DOE OSTI2022

Controlling Sustainability of Hydraulic Fracture Permeability in Ductile Shales

Hydraulic fracturing technology, along with horizontal drilling and associated completion technologies, dramatically increased US oil and gas production, by increasing the permeability of tight shales and allowing for cost-effective extraction of trapped hydrocarbons. For efficient and economical production, the targeted shale has to be fractured easily (i.e., good ‘frackability’), but also the permeability of induced fractures have to be sustained during production (good ‘sustainability’). For these reasons, currently, ductile shale with high clay content (>~40%) is difficult to exploit as a hydrocarbon resource, although hydrocarbons can still be found in it. Good frackability, high-TOC, low-clay-content resource shales—the ‘low-hanging fruit’—will be depleted, and we need to develop tools that allow tapping into currently underutilized, clay-rich ductile shales. This research project aims (1) to understand the behavior of fractures in clay-rich, ductile (and sometimes swelling) shales and (2) to begin to develop technologies for efficient and economical production from such shales. With these objectives, we examine time-dependent, coupled mechanical-hydrological behavior of open and proppant-filled fractures within different types of shales. In the preceding project, the focus of the research was to understand the behavior of the fractures and to predict their permeability changes due to fracture closure from shale matrix deformation and proppant embedment. In the current project, we investigate the possibility of chemically manipulating the sustainability of hydraulic fractures in ductile shales—specifically by altering the proppant-embedding behavior—via chemical means, at different stages of oil and gas production.

04 OIL SHALES AND TAR SANDS↗
DOE OSTI2024

Establishing a clostridia foundry for biosystems design by integrating computational modeling, systems-level analyses, and cell-free engineering technologies (Final Report)

Rapid population growth, a rise in global living standards, and economic competitiveness have intensified the need for sustainable, low-cost biofuels and bioproducts production. Industrial biotechnology using microbial cell factories – and waste and/or renewable feedstocks – is one of the most attractive approaches for addressing this need, particularly when large-scale chemical synthesis is untenable. Unfortunately, designing, building, and optimizing biosynthetic pathways in cells remains a complex challenge. With support from the Department of Energy, we worked to address this challenge in a new interdisciplinary venture that established the world’s first clostridial Foundry for Biosystems Design (cBioFAB). Working both in vitro (cell-free) and in vivo, the goal of this project was to interweave and advance state-of-the-art computational modeling, genome editing, omics measurements, systems-biology analyses, and cell-free technologies to expand the set of platform organisms that meet DOE bioenergy goals. Specifically, we manufactured fuel and chemical intermediates via existing and de novo pathways. This report covers the outcomes of our research project.

09 BIOMASS FUELS↗
DOE OSTI2023

Syntheses and characterization of isotopically labeled 1,3,5-triamino-2,4,6-trinitrobenzene (TATB)

Synthesis and characterization of chemical analogues of TATB, where specific atoms in the structure have been isotopically substituted, are reported. 15 N, 2 H, and 18 O have replaced the naturally occurring isotope distributions in the amino and/or the nitro attendant sites and 13 C has replaced the carbon in the ring structure. A modified wet-amination method was used to produce the analogues, and the isotopic replacements were performed by selective choice of labeled precursors. Four 15 N-labeled compounds (N replaced in the amino and nitro positions), two deuterium-labeled compounds (hydrogens replaced on the amino groups), and one 13 C-labeled compound (C in the ring substituted) were synthesized of high isotopic and chemical purity. One partially labeled 18 O-labeled compound (O in the nitro position) was a result of incomplete labeling due to exchange reactions during synthesis. The compounds were characterized by various spectroscopic methods – mass spectrometry (MS), solid-state nuclear magnetic resonance (SS-NMR), infrared (FTIR), powder x-ray diffraction (PXRD), and differential scanning calorimetry (DSC), depending upon the substitution. In conclusion, these compounds have been critical to the efforts in understanding the decomposition pathways of TATB when exposed to abnormal thermal environments.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Editorial: Functionalization of porous materials for sustainable energy applications

Global energy demands are shifting toward a more sustainable future, with the goal of achieving carbon neutrality by 2050. Emerging technologies are driving this transition. The industry, academia, government, non-profit organizations, and the broader community are collaboratively working to reduce greenhouse gas (GHG) emissions and address climate change to ensure a sustainable future. According to the International Energy Agency, in 2022, the production, transportation, and processing of oil and gas resulted in 5.1 billion tons of CO 2 -equivalent emissions, representing nearly 15% of all energy-related GHG emissions. Moreover, the end-use of oil and gas accounted for an additional 40% of emissions. The IEA’s Net Zero Emissions by 2050 Scenario calls for immediate, collective action from the industry, transportation and other stakeholders to mitigate these emissions. In this effort, the development of energy materials will play a critical role in reducing emissions. Among these, porous materials offer an innovative solution, leveraging their high surface area, adjustable pore sizes, and chemical versatility to address these pressing challenges effectively. By carefully designing their nanostructures, the architecture and properties of these materials can be tailored for specific applications. Key factors such as chemical composition, particle size, pore distribution, and surface area optimization enhance the reactivity and energy conversion efficiency. Additionally, pre- and post-functionalization processes can introduce targeted chemical properties, further improving their performance. This Research Topic explores recent advancements in energy and materials science through four scholarly papers, showcasing innovative solutions for sustainable energy technologies while providing valuable insights into the unique properties and structure of porous materials (Figure 1). Li et al. present their work on highly defective NiFeV layered triple hydroxides, highlighting enhanced electrocatalytic activity and stability for oxygen evolution reactions (OER). Kovalskii et al. contribute a mini-review on hydrogen storage using hexagonal boron nitride (h-BN) and BN-based materials, offering an insightful overview of these promising materials. Chava et al. discuss their recent achievements in ceramic electrolytes used for improvement of performance of solid-state batteries. Lastly, Li et al. review the properties of porous materials with a focus on shrinkage behavior during the drying process, shedding light on key considerations for material design.

36 MATERIALS SCIENCE↗
NASA NTRS1991

New developments in thermally stable polymers

Advances in high-temperature polymers since 1985 are discussed with the emphasis on the chemistry. High-temperature polymers refer to materials that exhibit glass-transition temperatures greater than 200 C and have the chemical structure expected to provide high thermooxidative stability. Specific polymers or series of polymers were selected to show how the chemical structure influences certain properties. Poly(arylene ethers) and polyimides are the two principal families of polymers discussed. Recent work on poly(arylene ethers) has concentrated on incorporating heterocyclic units within the polymer backbone. Recent polyimide work has centered on the synthesis of new polymers from novel monomers, several containing the trifluoromethyl group strategically located on the molecule. Various members in each of these polymer families display a unique combination of properties, heretofore unattainable. Other families of polymers are also briefly discussed with a polymer from an AB maleimidobenzocyclobutene exhibiting an especially attractive combination of properties.

Hergenrother, Paul M.↗
NASA NTRS2004

Bubble Combustion

A method of energy production that is capable of low pollutant emissions is fundamental to one of the four pillars of NASA s Aeronautics Blueprint: Revolutionary Vehicles. Bubble combustion, a new engine technology currently being developed at Glenn Research Center promises to provide low emissions combustion in support of NASA s vision under the Emissions Element because it generates power, while minimizing the production of carbon dioxide (CO2) and nitrous oxides (NOx), both known to be Greenhouse gases. and allows the use of alternative fuels such as corn oil, low-grade fuels, and even used motor oil. Bubble combustion is analogous to the inverse of spray combustion: the difference between bubble and spray combustion is that spray combustion is spraying a liquid in to a gas to form droplets, whereas bubble combustion involves injecting a gas into a liquid to form gaseous bubbles. In bubble combustion, the process for the ignition of the bubbles takes place on a time scale of less than a nanosecond and begins with acoustic waves perturbing each bubble. This perturbation causes the local pressure to drop below the vapor pressure of the liquid thus producing cavitation in which the bubble diameter grows, and upon reversal of the oscillating pressure field, the bubble then collapses rapidly with the aid of the high surface tension forces acting on the wall of the bubble. The rapid and violent collapse causes the temperatures inside the bubbles to soar as a result of adiabatic heating. As the temperatures rise, the gaseous contents of the bubble ignite with the bubble itself serving as its own combustion chamber. After ignition, this is the time in the bubble s life cycle where power is generated, and CO2, and NOx among other species, are produced. However, the pollutants CO2 and NOx are absorbed into the surrounding liquid. The importance of bubble combustion is that it generates power using a simple and compact device. We conducted a parametric study using CAVCHEM, a computational model developed at Glenn, that simulates the cavitational collapse of a single bubble in a liquid (water) and the subsequent combustion of the gaseous contents inside the bubble. The model solves the time-dependent, compressible Navier-Stokes equations in one-dimension with finite-rate chemical kinetics using the CHEMKIN package. Specifically, parameters such as frequency, pressure, bubble radius, and the equivalence ratio were varied while examining their effect on the maximum temperature, radius, and chemical species. These studies indicate that the radius of the bubble is perhaps the most critical parameter governing bubble combustion dynamics and its efficiency. Based on the results of the parametric studies, we plan on conducting experiments to study the effect of ultrasonic perturbations on the bubble generation process with respect to the bubble radius and size distribution.

Corrigan, Jackie↗
NASA NTRS2002

Magnetohydrodynamic Augmented Propulsion Experiment

A fundamental obstacle to routine space access is the specific energy limitations associated with chemical fuels. In the case of vertical take-off, the high thrust needed for vertical liftoff and acceleration to orbit translates into power levels in the 10 GW range. Furthermore, useful payload mass fractions are possible only if the exhaust particle energy (i.e., exhaust velocity) is much greater than that available with traditional chemical propulsion. The electronic binding energy released by the best chemical reactions (e.g., LOX/LH2 for example, is less than 2 eV per product molecule (approx. 1.8 eV per H2O molecule), which translates into particle velocities less than 5 km/s. Useful payload fractions, however, will require exhaust velocities exceeding 15 km/s (i.e., particle energies greater than 20 eV). As an added challenge, the envisioned hypothetical RLV (reusable launch vehicle) should accomplish these amazing performance feats while providing relatively low acceleration levels to orbit (2-3g maximum). From such fundamental considerations, it is painfully obvious that planned and current RLV solutions based on chemical fuels alone represent only a temporary solution and can only result in minor gains, at best. What is truly needed is a revolutionary approach that will dramatically reduce the amount of fuel and size of the launch vehicle. This implies the need for new compact high-power energy sources as well as advanced accelerator technologies for increasing engine exhaust velocity. Electromagnetic acceleration techniques are of immense interest since they can be used to circumvent the thermal limits associated with conventional propulsion systems. This paper describes the Magnetohydrodynamic Augmented Propulsion Experiment (MAPX) being undertaken at NASA Marshall Space Flight Center (MSFC). In this experiment, a 1-MW arc heater is being used as a feeder for a 1-MW magnetohydrodynamic (MHD) accelerator. The purpose of the experiment is to demonstrate that an MHD accelerator can be an effective augmentation system for increasing engine exhaust velocity. More specifically, the experiment is intended to show that electromagnetic effects are effective at producing flow acceleration whereas electrothermal effects do not cause unacceptable heating of the working fluid. The MHD accelerator was designed as an externally diagonalized segmented Faraday channel, which will be inserted into an existing 2-tesla electromagnet. This allows the external power to be connected through two terminals thereby minimizing the complexity and cost associated with powering each segment independently. The design of the accelerator and other components in the flow path has been completed and fabrication activities are underway. This paper provides a full description of MAPX including performance analysis, design, and test plans, and current status.

Litchford, Ron J.↗
DOE OSTI2021

Machine-learning-accelerated multimodal characterization and multiobjective design optimization of natural porous materials

Natural porous materials such as nanoporous clays are used as green and low-cost adsorbents and catalysts. The key factors determining their performance in these applications are the pore morphology and surface activity, which are typically represented by properties such as specific surface area, pore volume, micropore content and pH. The latter may be modified and tuned to specific applications through material processing and/or chemical treatment. Characterization of the material, raw or processed, is typically performed experimentally, which can become costly especially in the context of tuning of the properties towards specific application requirements and needing numerous experiments. In this work, we present an application of tree-based machine learning methods trained on experimental datasets to accelerate the characterization of natural porous materials. The resulting models allow reliable prediction of the outcomes of experimental characterization of processed materials (R2 from 0.78 to 0.99) as well as identification of key factors contributing to those properties through feature importance analysis. Furthermore, the high throughput of the models enables exploration of processing parameter–property correlations and multiobjective optimization of prototype materials towards specific applications. We have applied these methodologies to pinpoint and rationalize optimal processing conditions for clays exploitable in acid catalysis. One of such identified materials was synthesized and tested revealing appreciable acid character improvement with respect to the pristine material. Specifically, it achieved 79% removal of chlorophyll-a in acid catalyzed degradation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Chemical kinetic interactions of NO with a multi-component gasoline surrogate: Experiments and modeling

Here this work reports an experimental and modeling study on the chemical kinetic interactions of NO with a multi-component gasoline surrogate, namely PACE-20, using a twin-piston rapid compression machine at a stochiometric fuel loading with 20% EGR (exhaust gas recirculation) by mass, pressures of 20 and 40 bar, and temperatures from 700 to 930 K. Five NO concentrations are investigated, namely 0, 20, 50, 70 and 150 ppm, where NO addition effects are characterized through changes in PACE-20 ignition reactivity and heat release characteristics. Experiments indicate that within the low-temperature regime, NO promotes low-temperature heat release rate and main ignition reactivity at low addition levels, with saturation or even inhibiting effects observed at >50 ppm NO addition, while within the NTC/intermediate-temperature regime, adding NO only promotes reactivity. A recently updated, detailed chemical kinetic model with chemistry specific to NOx/hydrocarbons interaction incorporated is used to simulate the experiments, and reasonable agreement is obtained. In-depth sensitivity and rate of production analyses are further performed. The results indicate that NO interacts with PACE-20 via two types of interaction: (a) direct interactions between NO and PACE-20 derivatives, primarily through NO+HO 2 ↔NO 2 +OH and RO 2 +NO↔RO+NO 2 , and (b) indirect interactions between PACE-20 derivatives and NO 2 produced from the direct interactions, primarily through R+NO 2 ↔RO+NO. The observed NO inhibiting effect at low temperatures and 150 ppm NO addition is attributed to the lack of HO 2 radicals to sustain NO consumption via NO+HO 2 ↔NO 2 +OH, and the take-up of inhibiting pathways via RO 2 +NO↔RO+NO 2 . The results also indicate that even with the presence of multiple fuel components, NOx/hydrocarbons interactions are highly selective, and are mainly initiated by the interactions between NO and RO 2 radicals from cyclopentane and ethanol, as well as between NO 2 and R radicals from toluene, 1,2,4-trimethylbenzene and 1-hexene. Further studies on these interactive reactions are therefore highly recommended.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1980

Noble gas component organization in 14301

A study is conducted of the organization of noble gases in the Apollo 14 breccia 14301, giving particular attention to xenon from the extinct radionuclides I-129 and Pu-244. An essential ingredient of this work is the intercomparison between noble gases released in single-stage melts of grain size fractions and those released in stepwise extractions. This approach resolves 'functional' noble gas components, which are organized by siting, into the specific genetic contributions on the basis of the 'activation energies' for diffusive loss. The procedure makes it possible to resolve various genetic components on the basis of the chemical and structural differences in their specific locations. Consequently, distinctions can be made among components acquired by different processes and among components which have undergone different regolith histories.

Bernatowicz, T. J.↗
DOE OSTI2020

Two-level systems and growth-induced metastability in hydrogenated amorphous silicon

Specific heat measurements from 2 to 300 K of hydrogenated amorphous silicon prepared by hot-wire chemical vapor deposition show a large excess specific heat at low temperature, significantly larger than the Debye specific heat calculated from the measured sound velocity. The as-prepared films have a Schottky anomaly that is associated with metastable hydrogen in the amorphous network, as well as large linear and excess cubic term commonly associated with tunneling two-level systems in amorphous solids. Annealing at 200 °C, a temperature that enables hydrogen mobility but not evaporation, irreversibly reduces the heat capacity, eliminating the Schottky anomaly and leaving a reduced linear heat capacity. A non-monotonic dependence on growth temperature and H content is observed in all effects, except for sound velocity, which suggests that the tunneling two-level systems and the Schottky anomaly are associated with atomic hydrogen and require low density regions to form, while sound velocity is associated with the silicon network and increases with increasing growth temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2026

ab initio Sub-Mechanism Development for Cyclopentene Oxidation

To accurately predict low-temperature oxidation behavior, chemical kinetics mechanisms must contain complete reaction networks that include detailed consumption reactions of intermediates produced directly from hydroperoxyalkyl radicals, Q̇OOH, which undergo competing unimolecular reactions and bimolecular reactions with O2. Rates of chain-branching are governed by the flux between the two competing pathways, and inherently depend on temperature, pressure, and oxygen concentration. Neglect of consumption pathways for major oxidation intermediates leads to mechanism truncation error that is ameliorated by expanding the level of detail included in sub-mechanisms and employing ab initio methods for computing rates of elementary reactions and thermochemical properties of species involved. In the present work, an ab initio-derived sub-mechanism is developed using AutoMech to model the chemical kinetics of cyclopentene, a major product of cyclopentane oxidation. The ab initio sub-mechanism builds on a detailed mechanism developed using Reaction Mechanism Generator (RMG) for the specific purpose of determining the extent to which replacing cyclopentene-specific reactions and species with quantum chemical computations reduces model inaccuracies resulting from mechanism truncation error. In an effort to minimize interference from other reactions present during the formation of cyclopentene from cyclopentyl + O2, providing a narrower experimental scope, the model is compared against speciation measurements from jet-stirred reactor (JSR) experiments on cyclopentene oxidation. The experiments utilize vacuum ultraviolet-absorption spectroscopy and mass spectrometry for isomer-resolved speciation of intermediates at 835 Torr from 700 – 950 K. [O2]-dependent experiments were also conducted from 0.057 – 2.01 · 1018 molecules cm–3 at 825 K to examine the influence of oxygen on species profiles. Model predictions using the ab initio-revised mechanism yielded significant improvements in species profiles for both the temperature- and [O2]-dependent measurements, owing in part to increased rates of HOȮ and H2O2 production, which underscores the influence of theoretical calculations of reaction rates involving species produced from Ṙ + O2 such as cyclopentene.

AutoMech↗
DOE OSTI2022

A Generalizable Approach to Direct the Self-Assembly of Functional Blue-Phase Liquid Crystals

Blue phases (BPs) are soft and stimuli-responsive photonic crystals that are interesting for sensing, display, and lasing applications. Polycrystallinity has, however, limited both the study and applicability of BPs. Continuum simulations, which lack molecule-specific details, predict that striped chemical patterns, consisting of alternating homeotropic and planar regions, can be used to nucleate single crystals of BPs. Here it is experimentally demonstrated that, independent of the chemistry and complexity of the BP forming material, chemical patterns direct the self-assembly of BPs; these results indicate that a general, thermodynamics-based continuum description of BP self-assembly is adequate for a broad range of materials. When the pattern periodicity equals the BPII unit cell size, single crystals with (100) orientation form for all studied materials. Chemical patterns also promote the growth of BPI crystals with (110) orientation. Importantly, the self-assembly of a photopolymerizable BP is directed and thermally stable, UV-polymerized single crystals are prepared. As a result, the ability to create arbitrarily large, polymeric photonic single crystals with uniform lattice orientation, may have broad implications for optical applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

CO Adsorption on a Single‐Atom Catalyst Stably Embedded in Graphene

Abstract Confined single metal atoms in graphene‐based materials have proven to be excellent catalysts for several reactions and promising gas sensing systems. However, whether the chemical activity arises from the specific type of metal atom or is a direct consequence of the confinement itself remains unclear.

Chemistry↗
DOE OSTI2022

Achieving low-temperature hydrothermal relithiation by redox mediation for direct recycling of spent lithium-ion battery cathodes

Lithium-ion battery (LIB) recycling is an urgent need to address the massive generation of spent LIBs from portable devices and electrical vehicles. However, the large-scale recycling is hampered by economic and safety issues associated with today's recycling processes. In this study, we demonstrate a safe and energy efficient direct regeneration process based on low-temperature hydrothermal relithiation (LTHR) at low pressure for spent LiNi x Co y Mn z O 2 (0 < x,y,z <1, x + y + z = 1, or NCM) cathode materials. A low concentration of low-cost redox mediator is employed to improve the relithiation kinetics of spent NCM materials, enabling full relithiation temperature to be reduced from 220 °C to 100 °C or below. Correspondingly, the pressure incurred in the relithiation process can be reduced from ~25 bar to 1 bar, offering significantly improved operation safety. Specifically, three NCM materials, including chemically delithiated NCM111, cycled (degraded) NCM111, and cycled NCM622, were successfully regenerated with complete recovery of composition, crystal structure, and electrochemical performance, achieving the same effectiveness as that achieved at high temperature process. Meanwhile, the total energy consumption of spent cell recycling and the greenhouse gas emission is also reduced. This work provides a facile and scalable way to more sustainable LIB recycling with high economic return, high operation safety and low cost.

25 ENERGY STORAGE↗
DOE OSTI2022

Crystalline compounds for remediation of rare-earth fission products: A review

Rare-earth (RE) containing crystals have been investigated as media for the immobilization of RE fission products. During reprocessing of spent nuclear fuels, various fission products including REs, alkalis, and alkaline earths are found after the extraction of actinides. One viable option to immobilize the RE fission products is to incorporate them into chemically durable crystalline phases in specific waste forms. This study summarizes the crystal structures and synthesis methods of six RE-containing compounds that have applications in remediation of RE fission products. These compounds include oxyapatite [Ca2RE8(SiO4)6O2], oxychloride [REOCl], borosilicate [RE3BSi2O10], pyrochlore [RE2A2O7], monazite [REPO4], and perovskite [REAO3] where A denotes transitional metals. This review provides an overview of literature on the usage of these six compounds for immobilizing RE fission products and summarizes different synthesis methods for producing these compounds. Comparisons of structural parameters with different REs in each compound are also discussed.

rare-earth oxychloride, rare-earth oxyapatite, rar↗