Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ballistic range”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Outer planet entry nonequilibrium heating

An analytical tool has been developed which enables the impact of nonequilibrium effects on outer planet entry heating to be estimated. The analysis combines recent shock tube experiments, flow field calculations, and planetary entry trajectory analysis. The thickness of the nonequilibrium layer and its variation around the entry body have been correlated by a reaction flow parameter over a wide range of entry conditions. The influence of nonequilibrium effects on heating during entry into Saturn and Jupiter model atmospheres has been studied and the effect of vehicle size and ballistic coefficient determined. A nonequilibrium layer of significant thickness was found to exist during portions of entry into Saturn and Jupiter warm atmospheres. However, the nonequilibrium layer was found to be thin during the peak heating portions of the trajectory and resulted in reductions in total probe heating of less than 15 per cent.

Leibowitz, L. P.↗

Analytic Ballistic Performance Model of Whipple Shields

The dual-wall Whipple shield is the shield of choice for lightweight, long-duration flight. The shield uses an initial sacrificial wall to initiate fragmentation and melt an impacting threat that expands over a void before hitting a subsequent shield wall of a critical component. The key parameters to this type of shield are the rear wall and its mass which stops the debris, as well as the minimum pressure generated under threat particle impact of the sacrificial wall and the amount of void that is available for expansion. Ensuring the minimum pressure is sufficiently high to achieve large scale fragmentation/melt of the threat particle enables the expansion of the threat and reduces the momentum flux of the debris on the rear wall. Three key factors in the minimum pressure achieved are the thickness of the sacrificial wall relative to the characteristic dimension of the impacting particle, the density and material cohesion contrast of the sacrificial wall relative to the threat particle and the impact speed. The mass of the rear wall and the sacrificial wall are desirable to minimize for launch costs and dynamic concerns making it important to have an understanding of the effects of density contrast and impact speed. In this paper a fourth key parameter is identified related to fragmentation, which corresponds to the ratio of the size of the projectile relative to the transition from brittle to ductile hole growth in the projectile. Ballistic limit equations have been developed to define the failure limits of a MMOD shield, generally in terms of projectile diameter (or mass), impact velocity, and angle. Within the range of impact velocities relevant for Earth-orbiting spacecraft, three distinct regions of penetration phenomenology have been identified for Whipple shields: center dot Low velocity: the projectile is eroded (and possibly deformed) during its passage through the bumper plate, but is not fragmented. Thus, perforation of the rear wall is by a fragment with a mass and speed equal to or less than the original impactor. center dot Intermediate (shatter) velocity: impact velocities are sufficient to induce projectile fragmentation upon impact with the bumper plate, resulting in a coarse debris cloud with large solid fragments. Increasing velocity within the shatter regime results in increased fragmentation, and eventually melting, of the projectile and bumper fragments, generating a finer and more evenly dispersed debris cloud. Failure of the rear wall is a complicated combination of modes observed at low- and hypervelocity. center dot Hypervelocity: the projectile and holed-out bumper material is completely, or nearly completely, melted and/or vaporized by the initial impact. The resultant debris cloud impacts over a dispersed area of the rear wall, loading it impulsively and inducing failure through rupture or petalling. While each of these regimes are well observed with extensive empirical methods to describe these regions, differences in impactor materials, configurations of shields and questions about the limitations of the attainable impact speeds have left questions that are difficult to answer from completely empirical methods.

Miller, J. E.↗

NASA Capture, Containment, and Return System: Bringing Mars Samples to Earth

The Capture, Containment, and Return System (CCRS) project is NASA’s last step in bringing back Mars samples. CCRS will close a decades-long multi-mission and multi-agency effort to bring Mars surface samples back to Earth for scientific studies. CCRS will launch in 2027 on the European Earth Return Orbiter (ERO) spacecraft, which will provide communications relay for the Mars Sample Return ground missions, Perseverance rover and the Sample Retrieval Lander (SRL) (to be launched in 2028). The main mission for CCRS begins when the first-ever orbital planetary capture operation occurs with CCRS catching and securing the Orbiting Sample (OS)in low Mars orbit. From this point, the system will perform additional "firsts": it will autonomously contain the OS with heat-shrink-fit, sterilize the outside surface, and assemble the Earth entry capsule, named Earth Entry System (EES), in orbit around Mars using a gantry mechanism. At approximately 2.8 Lunar distances from Earth, or 3-days from entry into Earth’s atmosphere, CCRS will open its micrometeoroid shield and release the EES on a ballistic trajectory to Earth. The EES is designed to be a fully passive system that will enter the atmosphere and land without parachute at the Utah Test and Training Range (UTTR).

Mars mission, Sample return, Mission design↗

Know the enemy: 2D Fermi liquids

Highlights: • Regime of validity of the Fermi liquid theory in 2D interacting Fermi systems has been investigated. • Phase diagram for hydrodynamic and ballistic regimes in the frequency–temperature space has been obtained. • Temperature correction to quasiparticle effective mass has been calculated. • 2D Wiedemann–Franz law and 2D Kadawoki–Woods relation have been discussed. We describe an analytical theory investigating the regime of validity of the Fermi liquid theory in interacting, via the long-range Coulomb coupling, two-dimensional Fermi systems comparing it with the corresponding 3D systems. We find that the 2D Fermi liquid theory and 2D quasiparticles are robust up to high energies and temperatures of the order of Fermi energy above the Fermi surface, very similar to the corresponding three-dimensional situation. We calculate the phase diagram in the frequency–temperature space separating the collisionless ballistic regime and the collision-dominated hydrodynamic regime for 2D and 3D interacting electron systems. We also provide the temperature corrections up to third order for the renormalized effective mass, and comment on the validity of 2D Wiedemann–Franz law and 2D Kadawoki–Woods relation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Requirements and Capabilities for Planetary Missions: Mariner Encke Ballistic Flyby 1980

This mission will provide a broad-based fast reconnaissance of comet Encke, building a data base for subsequent more detailed comet investigations, including rendezvous. After a 3 month flight, the spacecraft will encounter the comet at a nominal range of about 500 km. Flyby velocity will be 7 to 28 km/sec depending on choice of arrival data (0 to 35 days before Encke perihelion) and launch vehicle. The spacecraft will be similar to the MVM 73 spacecraft, with scan platform and 117 kbps encounter data rate, and designed to survive the thermal environment of 0.34 to 0.8 AU.

Ball, G. G.↗

Sub-micron fracture mechanism in silica-based glass activated by permanent densification from high-strain loading

Several silica-based glasses were fractured at high strain energy via drop-weight testing on small specimens. A cylindrical specimen geometry was chosen to promote initially simple, axisymmetric, and uniform compressive loading. The imposed uniaxial compressive strain at impact was sufficiently high to qualitatively cause permanent densification. Produced fragments were collected for postmortem and a fraction of them, for all the silica-based glasses, consistently had distinct sub-micron-sized fractures (~ 300–1000 nm), designated here as “microkernels”, on their surfaces. They would most often appear as a sub-micron pore on the fragment - apparently if the microkernel had popped out as a consequence of the local crack plane running through it, tensile-strain release, and the associated formation of the fragment it was on. No fractographic evidence was found to show the microkernels were associated with local failure initiation. However, their positioning and habit sometimes suggested they were associated with localized crack branching and that they could have influenced secondary fracturing that occurred during overall crushing and comminution and associated fragment size and shape creation. Furthermore, the size range of these microkernels is much too small to affect structural flexure strength of these glasses for most applications but are of a size and concentration that may affect their ballistic, shock, crush, and comminution responses when permanent densification is concomitantly occurring.

36 MATERIALS SCIENCE↗

Advanced meteoroid and debris shielding concepts

The results of the shielding screening and optimization work conducted at the NASA Johnson Space Center Hypervelocity Impact Research Laboratory (HIRL) are described. The impact tests to investigate and optimize certain aspects of the aluminum mesh double-bumper concept, which was considered the best performer in the screening test, are analyzed. Preliminary results indicate that the aluminum mesh double-bumper concept shows a 30 to 40 percent weight reduction compared to an aluminum Whipple shield in the velocity range study, besides such advantages as an increased resistance to penetration and the fact that the aluminum mesh does not produce damaging secondary ejecta particles. It is suggested that the ballistic protection can be improved even more if an intermediate layer of a high-strength cloth is attached near the rear wall.

Christiansen, Eric L.↗

Propellant development for the Advanced Solid Rocket Motor

The properties of a propellant developed for the NASA Advanced Solid Rocket Motor (ASRM) are described in terms of its composition, performance, and compliance to NASA specifications. The class 1.3 HTPB/AP/A1 propellant employs an ester plasticizer and the content of ballistic solids is set at 88 percent. Ammonia evolution is prevented by the utilization of a neutral bonding agent which allows continuous mixing. The propellant also comprises a bimodal AP blend with one ground fraction, ground AP of at least 20 microns, and ferric oxide to control the burning rate. The propellant's characteristics are discussed in terms of tradeoffs in AP particle size and the types of Al powder, bonding agent, and HTPB polymer. The size and shape of the ballistic solids affect the processability, ballistic properties, and structural properties of the propellant. The revised baseline composition is based on maximizing the robustness of in-process viscosity, structural integrity, and burning-rate tailoring range.

Landers, L. C.↗

Ballistic magnon heat conduction and possible Poiseuille flow in the helimagnetic insulator Cu 2 OSeO 3

Herein we report on the observation of magnon thermal conductivity κ m ~ 70 W/mK near 5 K in the helimagnetic insulator Cu 2 OSeO 3 , exceeding that measured in any other ferromagnet by almost two orders of magnitude. Ballistic, boundary-limited transport for both magnons and phonons is established below 1 K, and Poiseuille flow of magnons is proposed to explain a magnon mean-free path substantially exceeding the specimen width for the least defective specimens in the range 2 K < T < 10 K. These observations establish Cu 2 OSeO 3 as a model system for studying long-wavelength magnon dynamics.

36 MATERIALS SCIENCE↗

Space shuttle SRM interim contract, part 2

The characteristics of the solid rocket propellant for use with the space shuttle rocket engine are discussed. Design ramifications have created different web thicknesses and motor operating pressures which have necessitated small changes in the required propellant burning rate at 1,000 psia. However, the SRM burning rate remains well within the range demonstrated in the Poseidon and Minuteman first stage motors. Any change in propellant burning rate can be accomplished readily by a slight modification in the oxidizer particle size distribution. The ballistic and mechanical properties of the propellant remain unchanged from the baseline (Configuration 0).

Source record↗

Ignition of global wildfires at the Cretaceous/Tertiary boundary

The recent discovery of an apparently global soot layer at the Cretaceous/Tertiary boundary indicates that global wildfires were somehow ignited by the impact of a comet or asteroid. It is shown here that the thermal radiation produced by the ballistic reentry of ejecta condensed from the vapor plume of the impact could have increased the global radiation flux by factors of 50 to 150 times the solar input for periods ranging from one to several hours. This great increase in thermal radiation may have been responsible for the ignition of global wildfires, as well as having deleterious effects on unprotected animal life.

Melosh, H. J.↗

An Investigation of Terminal Guidance and Control Techniques for a Robotic Mars Lander

Continuing on previous work, various precision landing control algorithms arc examined with the goal of minimizing the landed distance to a specified location on the Mars surface. This study considers a set of points from parachute handoff to touchdown on the surface. The first scenario considers a reverse gravity turn to a hover condition 500 meters above the surface and then uses lateral thrusting to minimize die range to target. The second scenario examines a guided, lifting parachute followed by a powered gravity turn to the targeted landing site. The third scenario considers thrust vectoring while on the ballistic parachute, followed by a reverse gravity turn to touchdown.

Birge, Brian K.↗

Temporary Atmospheres Produced By Human Activities on the Moon

Outgassing from materials, whether through the ascent/descent stages of lunar vehicles, airlock depressurizing, rover or astronaut suit outgassing, may cause an effect of unwanted accumulation of volatiles at the surface and exosphere. This is especially important at (or proximal) to permanently shadowed regions (PSRs) at the lunar poles. Herein, we provide estimates of expected outgassing from various human-landed objects on the Moon, including backpacks, airlocks, rovers, landers, trash and mining operations. Astronaut suits produce some level of oxygen outgassing (Helou et al., 2022), which may transport and condense in these PSRs, even in micro- cold traps (Glavin et al., 2010).We estimate the outgassing from drill mining and trash-to-gas conversion assuming a specific technology is operating. These outgassing systems can create local, temporary atmospheres in the vicinity (∼100 km radius) of the sources. The atmosphere may be particularly high within meters of the source. To obtain column densities for these temporary atmospheres, we first bracket ranges for the gas number loss as a function of time. We then derive the maximum distance traveled and the time the released molecules remain in the exosphere for a single ballistic hop, assuming the molecules are ejected from the surface of the object at its surface temperature. In some cases, such as the astronaut backpack and the rover, the temperature is that of the source. Given this information, an average and peak local exospheric density and column density can be estimated. We find that backpacks, airlock releases, and the Starship lander can create relatively high-density local atmospheres, with local near-lander outgassing water densities exceeding 107/cm3. This local water exosphere is over 106 times greater than the LADEE-derived lower limit of the natural water exosphere at ∼3/cm3. Thus, the anthropogenic temporary water exosphere will likely dominate the environment near the lander, making an assessment of the natural exospheric water environment difficult.

Rosemary M Killen↗

Hyperspectral Imager-Tracker

The Hyperspectral Imager-Tracker (HIT) is a technique for visualization and tracking of low-contrast, fast-moving objects. The HIT architecture is based on an innovative and only recently developed concept in imaging optics. This innovative architecture will give the Light Prescriptions Innovators (LPI) HIT the possibility of simultaneously collecting the spectral band images (hyperspectral cube), IR images, and to operate with high-light-gathering power and high magnification for multiple fast- moving objects. Adaptive Spectral Filtering algorithms will efficiently increase the contrast of low-contrast scenes. The most hazardous parts of a space mission are the first stage of a launch and the last 10 kilometers of the landing trajectory. In general, a close watch on spacecraft operation is required at distances up to 70 km. Tracking at such distances is usually associated with the use of radar, but its milliradian angular resolution translates to 100- m spatial resolution at 70-km distance. With sufficient power, radar can track a spacecraft as a whole object, but will not provide detail in the case of an accident, particularly for small debris in the onemeter range, which can only be achieved optically. It will be important to track the debris, which could disintegrate further into more debris, all the way to the ground. Such fragmentation could cause ballistic predictions, based on observations using high-resolution but narrow-field optics for only the first few seconds of the event, to be inaccurate. No optical imager architecture exists to satisfy NASA requirements. The HIT was developed for space vehicle tracking, in-flight inspection, and in the case of an accident, a detailed recording of the event. The system is a combination of five subsystems: (1) a roving fovea telescope with a wide 30 field of regard; (2) narrow, high-resolution fovea field optics; (3) a Coude optics system for telescope output beam stabilization; (4) a hyperspectral-mutispectral imaging assembly; and (5) image analysis software with effective adaptive spectral filtering algorithm for real-time contrast enhancement.

Agurok, Llya↗

Range Safety Flight Elevation Limit Calculation Software

This program was developed to fill a need within the Wallops Flight Facility workflow for automation of the development of vertical plan limit lines used by flight safety officers during the conduct of expendable launch vehicle missions. Vertical plane present-position-based destruct lines have been used by range safety organizations at numerous launch ranges to mitigate launch vehicle risks during the early phase of flight. Various ranges have implemented data submittal and processing workflows to develop these destruct lines. As such, there is significant prior art in this field. The ElLimits program was developed at NASA's Wallops Flight Facility to automate the process for developing vertical plane limit lines using current computing technologies. The ElLimits program is used to configure launch-phase range safety flight control lines for guided missiles. The name of the program derives itself from the fundamental quantity that is computed - flight elevation limits. The user specifies the extent and resolution of a grid in the vertical plane oriented along the launch azimuth. At each grid point, the program computes the maximum velocity vector flight elevation that can be permitted without endangering a specified back-range location. Vertical plane x-y limit lines that can be utilized on a present position display are derived from the flight elevation limit data by numerically propagating 'streamlines' through the grid. The failure turn and debris propagation simulation technique used by the application is common to all of its analysis options. A simulation is initialized at a vertical plane grid point chosen by the program. A powered flight failure turn is then propagated in the plane for the duration of the so-called RSO reaction time. At the end of the turn, a delta-velocity is imparted, and a ballistic trajectory is propagated to impact. While the program possesses capability for powered flight failure turn modeling, it does not require extensive user inputs of vehicle characteristics (e.g., thrust and aerodynamic data), nor does it require reams of turn data after the traditional fashion of the Air Force ranges. The program requires a nominal trajectory table (time, altitude, range, velocity, and flight elevation) and makes heavy use of it to initialize and model a failure turn.

Lanzi, Raymond J↗

Negative differential resistance in GaN tunneling hot electron transistors

Room temperature negative differential resistance is demonstrated in a unipolar GaN-based tunneling hot electron transistor. Such a device employs tunnel-injected electrons to vary the electron energy and change the fraction of reflected electrons, and shows repeatable negative differential resistance with a peak to valley current ratio of 7.2. The device was stable when biased in the negative resistance regime and tunable by changing collector bias. Good repeatability and double-sweep characteristics at room temperature show the potential of such device for high frequency oscillators based on quasi-ballistic transport.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

MONITORING THE BIDIRECTIONAL RELATIVISTIC JETS OF THE RADIO GALAXY 1946+708

We report on a multifrequency, multi-epoch campaign of Very Long Baseline Interferometry (VLBI) observations of the radio galaxy 1946+708 using the Very Long Baseline Array and a Global VLBI array. From these high-resolution observations, we deduce the kinematic age of the radio source to be {approx}4000 years, comparable with the ages of other Compact Symmetric Objects. Ejections of pairs of jet components appears to take place on time scales of ten years and these components in the jet travel outward at intrinsic velocities between 0.6c and 0.9c. From the constraint that jet components cannot have intrinsic velocities faster than light, we derive H {sub 0} > 57 km s{sup -1} Mpc{sup -1} from the fastest pair of components launched from the core. We provide strong evidence for the ejection of a new pair of components in {approx}1997. From the trajectories of the jet components, we deduce that the jet is most likely to be helically confined, rather than being purely ballistic in nature.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Impact and Penetration of Thin Aluminum 2024 Flat Panels at Oblique Angles of Incidence

The U.S. Federal Aviation Administration (FAA) and the National Aeronautics and Space Administration (NASA) are actively involved in improving the predictive capabilities of transient finite element computational methods for application to safety issues involving unintended impacts on aircraft and aircraft engine structures. One aspect of this work involves the development of an improved deformation and failure model for metallic materials, known as the Tabulated Johnson-Cook model, or MAT224, which has been implemented in the LS-DYNA commercial transient finite element analysis code (LSTC Corp., Livermore, CA) (Ref. 1). In this model the yield stress is a function of strain, strain rate and temperature and the plastic failure strain is a function of the state of stress, temperature and strain rate. The failure criterion is based on the accumulation of plastic strain in an element. The model also incorporates a regularization scheme to account for the dependency of plastic failure strain on mesh size. For a given material the model requires a significant amount of testing to determine the yield stress and failure strain as a function of the three-dimensional state of stress, strain rate and temperature. In addition, experiments are required to validate the model. Currently the model has been developed for Aluminum 2024 and validated against a series of ballistic impact tests on flat plates of various thicknesses (Refs. 1 to 3). Full development of the model for Titanium 6Al-4V is being completed, and mechanical testing for Inconel 718 has begun. The validation testing for the models involves ballistic impact tests using cylindrical projectiles impacting flat plates at a normal incidence (Ref. 2). By varying the thickness of the plates, different stress states and resulting failure modes are induced, providing a range of conditions over which the model can be validated. The objective of the study reported here was to provide experimental data to evaluate the model under more extreme conditions, using a projectile with a more complex shape and sharp contacts, impacting flat panels at oblique angles of incidence.

Ruggeri, Charles R.↗