Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “atomic force microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2012

Synthesis of graphene-based Pt nanoparticles by a one-step in situ plasma approach under mild conditions

Herein, a one-step in situ plasma approach to synthesize the highly dispersed Pt nanoparticles on graphene under mild conditions is reported. The graphene oxide (GO) was transformed into graphene and H{sub 2}PtCl{sub 6} was simultaneously transformed into Pt nanoparticles under argon plasma conditions. The synthesized graphene-based Pt nanoparticles were characterized by scanning electron microscopy, atomic force microscopy, x-ray diffraction, and Fourier transform infrared spectroscopy. The analysis showed that the Pt nanoparticles were deposited on graphene as a form of face-centered cubical structure and the oxygen groups on graphene oxide were partially removed. The results of x-ray photoelectron spectroscopy analysis further confirmed the results.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2016

Ru nucleation and thin film smoothness improvement with ammonia during chemical vapor deposition

This study reports the use of ammonia to inhibit the growth of previously nucleated ruthenium islands and force the nucleation of additional islands such that thinner films form as the islands coalesce with continued growth. Ruthenium films are grown at 448 K in a chemical vapor deposition process on SiO{sub 2}/Si(001) using triruthenium dodecacarbonyl, Ru{sub 3}(CO){sub 12}, with and without a constant partial pressure of ammonia. Film growth was performed at a Ru{sub 3}(CO){sub 12}/Ar pressure of 47.2 mTorr. The ammonia partial pressure varied from 0 to 27.8 mTorr. X-ray photoelectron spectroscopy was used to analyze the samples in situ. Ex situ characterization included scanning electron microscopy, atomic force microscopy, and x-ray diffraction and x-ray reflectivity. Nucleation studies limited to the first 10 min of growth revealed the maximum nanoparticle (island) density of 8.1 × 10{sup 11 }cm{sup −2} occurred at an intermediate ammonia pressure (5.25 mTorr) compared to a density of 3.1 × 10{sup 11 }cm{sup −2} for no ammonia addition. Extending film growth to 120 min and varying the ammonia partial pressure during the first 10 min followed by 5.25 mTorr ammonia pressure for the final 110 min reveals the importance of nucleation on film smoothness. A model describing the inhibition effects of ammonia during nucleation and growth is presented.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Preparation of GaN on GaAs (100) substrate by annealing and post-nitridation

Preparation of GaN on GaAs (100) substrate by annealing and post-nitridation process has been studied. X-ray diffraction analysis confirmed the formation β-Ga{sub 2}O{sub 3} phase on annealed substrate. Nitridation of annealed samples resulted in formation hexagonal structure of GaN. Morphological changes of annealed and nitridated samples were analyzed using optical microscopy, scanning electron microscopy, atomic force microscopy. Chemical composition and elemental impurities were analysed by energy dispersive x-ray diffraction. The room-temperature photoluminescence study of annealed samples shows broad emission from 300 nm to 500 nm related to of β-Ga{sub 2}O{sub 3}, whereas nitridated samples show near band edge emission at 370 nm (3.36 eV) which corresponds to GaN.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Surface modification and optical properties of metal doped indium sulfide thin films

Indium sulfide (In{sub 2}S{sub 3}) thin films were prepared by chemical bath deposition method in same deposition conditions, and then doped by metals including Ag, Al and Cu. Produced films post annealed at 400 °C temperature about 1 h. The effects of different metal-doping on structural, morphological and optical properties of the films were investigated by means of X-ray diffraction, scanning electron microscopy, atomic force microscopy and UV–Vis spectroscopy analyses. Produced indium sulfide thin film was amorphous and doping process lead to shifts peaks in lower angles. Morphology and nanostructure of doped films changed completely. Compact doped films have been formed. Optical constants of the produced thin films were calculated using Kramers–Kronig relations on reflectivity curves. Different doping impurities changed optical curves and band gaps.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2019

Study of the physical properties of CuS thin films grown by SILAR method

CuS thin films were obtained using the SILAR method on an amorphous glass substrate. All experiments were performed at room temperature. CuS thin films were deposited at 30, 40, 50 and 60 cycles, respectively. Structural, morphological and optical properties of the structures that increase the thickness of nanostructured CuS thin films were investigated. X-ray diffraction, scanning electron microscopy, atomic force microscopy, RAMAN and optical absorption measurements were carried out in order to examine the physical properties of CuS thin films. As a result of the analysis, we can say that the thickness increase positively affects the crystal structure of CuS thin films. In addition, the energy bandgap range of CuS thin films ranged from 2.22 to 1.78 eV. Analysis results of CuS thin films using SILAR method show that thickness is an important factor for thin film studies.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2011

Investigation of size dependent structural and optical properties of thin films of CdSe quantum dots

Research highlights: {yields} CdSe q-dots have been synthesized using simple chemical synthesis route. {yields} Thin film of CdSe quantum dots exhibited self-organized growth. {yields} Size dependent blue shift observed in the absorption edge of CdSe nanocrystallites. {yields} PL emission band corresponds to band edge luminescence and defect luminescence. {yields} Organized growth led to enhancement in luminescence yield of smaller size Q-dots. -- Abstract: Cadmium selenide (CdSe) quantum dots were grown on indium tin oxide substrate using wet chemical technique for possible application as light emitting devices. The structural, morphological and luminescence properties of the as deposited thin films of CdSe Q-dot have been investigated, using X-ray diffraction, transmission electron microscopy, atomic force microscopy and optical and luminescence spectroscopy. The quantum dots have been shown to deposit in an organized array on ITO/glass substrate. The as grown Q-dots exhibited size dependent blue shift in the absorption edge. The effect of quantum confinement also manifested as a blue shift of photoluminescence emission. It is shown that the nanocrystalline CdSe exhibits intense photoluminescence as compared to the large grained polycrystalline CdSe films.

36 MATERIALS SCIENCE↗
DOE OSTI2012

Combined microscopies study of the C-contamination induced by extreme-ultraviolet radiation: A surface-dependent secondary-electron-based model

SiO{sub 2} and Al{sub 2}O{sub 3} surfaces exposed to periodically modulated extreme ultraviolet (EUV) light ({lambda} = 46.9 nm) have been investigated at the {mu}m scale by optical microscopy, scanning electron microscopy, scanning Auger microscopy, atomic force microscopy, and Kelvin probe force microscopy. The formation of a carbon contamination layer preserving the same periodical modulation of the EUV dose has been observed. The mechanisms of hydrocarbon molecules deposition have been studied with the help of correlation plots between the modulated Auger signal and the corresponding EUV dose. A surface-dependent secondary-electron-based model has been proposed.

36 MATERIALS SCIENCE↗
DOE OSTI2011

Spinodal Decomposition of Ga{sub x}In{sub 1-x}As{sub y}P{sub 1-y}Quaternary Alloys

Using X-ray structural analysis, scanning electron microscopy, atomic force microscopy, and photoluminescent spectroscopy, it is shown that it is possible to obtain a small-scale domain structure on the surface of liquid-phase epitaxial heterostructures. The domain structure emerges as a result of spinodal decomposition of the Ga{sub x}In{sub 1-x}As{sub y}P{sub 1-y} quaternary alloy due to immiscibility of its components and relaxation of its lattice parameter to surrounding layers.

36 MATERIALS SCIENCE↗
DOE OSTI2010

Gold nanoparticles-graphene hybrids as active catalysts for Suzuki reaction

Graphene was successfully modified with gold nanoparticles in a facile route by reducing chloroauric acid in the presence of sodium dodecyl sulfate, which is used as both a surfactant and reducing agent. The gold nanoparticles-graphene hybrids were characterized by high-resolution transmission electron microscopy, atomic force microscopy, X-ray photoelectron spectroscopy, Raman spectroscopy, X-ray diffraction and energy X-ray spectroscopy. We demonstrate for the first time that the gold nanoparticles-graphene hybrids can act as efficient catalysts for the Suzuki reaction in water under aerobic conditions. The catalytic activity of gold nanoparticles-graphene hybrids was influenced by the size of the gold nanoparticles.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Structure of platinum–carbon electrodes containing various forms of nafion proton-conducting polymer

Scanning electron microscopy, atomic force microscopy, and cyclic voltammetry have been used to perform a complex comparative study of the structure of hydrogen fuel cell electrodes consisting of nanostructured platinum on carbon black and electrodes containing a proton-conducting Nafion polymer introduced into the electrode in the form of a solution and in a precoagulated state. It has been shown that, in the latter case, the specific area of electrochemically active platinum increases significantly (by up to two times).

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2017

One-step construction of a molybdenum disulfide/multi-walled carbon nanotubes/polypyrrole nanocomposite biosensor for the ex-vivo detection of dopamine in mouse brain tissue

Highlights: • Ex vivo dopamine detection in mouse brain tissues of Parkinson's disease model. • Nanocomposite constructed by one-step electrochemical approach. • The synergetic performance enhancement of the sensor by nanocomposite. We developed a new strategy for construction of a biosensor for the neurotransmitter dopamine. The biosensor was constructed by one-step electrochemical deposition of a nanocomposite in aqueous solution at pH 7.0, consisting of molybdenum disulfide, multi-walled carbon nanotubes, and polypyrrole. A series of analytical methods was performed to investigate the surface characteristics and the improved electrocatalytic effect of the nanocomposite, including cyclic voltammetry, electrochemical impedance spectroscopy, field-emission scanning electron microscopy, atomic force microscopy, and Raman spectroscopy. The constructed biosensor showed high sensitivity (1.130 μAμM{sup −1}cm{sup −2}) with a dynamic linearity range of 25–1000 nM and a detection limit of 10 nM. Additionally, the designed sensor exhibited strong anti-interference ability and satisfactory reproducibility. The practical application of the sensor was manifested for the ex vivo determination of dopamine neurotransmitters using brain tissue samples of a mouse Parkinson's disease model.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2011

Synthesis of few-layered graphene by H{sub 2}O{sub 2} plasma etching of graphite

Herein, we reported an approach to synthesize few-layered graphene by etching of the graphite using H{sub 2}O{sub 2} plasma technique. The synthesized few-layered graphene was characterized by scanning electron microscopy, atomic force microscopy, Raman spectroscopy, and x-ray photoelectron spectroscopy (XPS). The analysis showed that few-layered graphene was formed in high quality level. The XPS analysis suggested that H{sub 2}O{sub 2} plasma etching of graphite could oxidize graphene and generated -C-OH and >C=O groups on the graphene surfaces. The H{sub 2}O{sub 2} plasma technique is an easy and environmental friendly method to synthesize few-layered graphene from the graphite.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Shape transition in nano-pits after solid-phase etching of SiO{sub 2} by Si islands

We study the nano-pits formed during the etching of a SiO{sub 2} film by reactive Si islands at T≈1000 °C. Combining low energy electron microscopy, atomic force microscopy, kinetic Monte Carlo simulations, and an analytic model based on reaction and diffusion at the solid interface, we show that the shape of the nanopits depend on the ratio R/x{sub s} with R the Si island radius and x{sub s} the oxygen diffusion-length at the Si/SiO{sub 2} interface. For small R/x{sub s}, nanopits exhibit a single-well V-shape, while a double-well W-shape is found for larger R/x{sub s}. The analysis of the transition reveals that x{sub s}∼60 nm at T≈1000 °C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2011

Controllable synthesis of graphene sheets with different numbers of layers and effect of the number of graphene layers on the specific capacity of anode material in lithium-ion batteries

High quality graphene sheets are synthesized through efficient oxidation process followed by rapid thermal expansion and reduction by H{sub 2}. The number of graphene layers is controlled by tuning the oxidation degree of GOs. The higher the oxidation degree of GOs is getting, the fewer the numbers of graphene layers can be obtained. The material is characterized by elemental analysis, thermo-gravimetric analysis, scanning electron microscopy, atomic force microscopy, transmission electron microscopy and Fourier transform infrared spectroscopies. The obtained graphene sheets with single, triple and quintuplicate layers as anode materials exhibit a high reversible capacity of 1175, 1007, and 842 mA h g{sup -1}, respectively, which show that the graphene sheets with fewer layers have higher reversible capacity. -- Graphical abstract: The typical TEM images of the graphene sheets derived from GO3(a), GO2(b) and GO1(c). Display Omitted Highlights: {yields} With the oxidation degree of GO increasing, the numbers of graphene layers decreased. {yields} With the numbers of graphene layers decreasing, the reversible capacity improved. {yields} Graphene sheets with single-layer exhibit the best electrochemical performances.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Pressure-assisted fabrication of organic light emitting diodes with MoO{sub 3} hole-injection layer materials

In this study, pressures of ∼5 to ∼8 MPa were applied to organic light emitting diodes containing either evaporated molybdenum trioxide (MoO{sub 3}) or spin-coated poly(3,4-ethylene dioxythiophene) doped with poly(styrene sulphonate) (PEDOT:PSS) hole-injection layers (HILs). The threshold voltages for both devices were reduced by about half, after the application of pressure. Furthermore, in an effort to understand the effects of pressure treatment, finite element simulations were used to study the evolution of surface contact between the HIL and emissive layer (EML) under pressure. The blister area due to interfacial impurities was also calculated. This was shown to reduce by about half, when the applied pressures were between ∼5 and 8 MPa. The finite element simulations used Young's modulus measurements of MoO{sub 3} that were measured using the nanoindentation technique. They also incorporated measurements of the adhesion energy between the HIL and EML (measured by force microscopy during atomic force microscopy). Within a fracture mechanics framework, the implications of the results are then discussed for the pressure-assisted fabrication of robust organic electronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Ti3+-TiO2/Ce3+-CeO2 Nanosheet heterojunctions as efficient visible-light-driven photocatalysts

Highlights: • A novel Ti{sup 3+}-TiO{sub 2}/Ce{sup 3+}-CeO{sub 2} nanosheet heterojunction is fabricated. • It owns the bandgap of 2.6 eV and extends the photoresponse to visible light region. • It exhibits excellent visible-light-driven photocatalytic performance. • It is due to synergy of Ti{sup 3+}, Ce{sup 3+} co-doping and nanosheet heterojunction. - Abstract: Novel Ti{sup 3+}-TiO{sub 2}/Ce{sup 3+}-CeO{sub 2} nanosheet heterojunctions are successfully prepared via a facile hydrothermal approach combined with a wet-chemical deposition precipitation and an in situ solid-state chemical reduction strategy. The structures of the as-prepared samples are characterized in detail by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, atomic force microscopy, X-ray photoelectron spectroscopy and UV–vis diffuse reflectance spectroscopy. The results show that Ti{sup 3+} and Ce{sup 3+} are both doped into the lattice of TiO{sub 2} and CeO{sub 2}, respectively, which narrow the band gap to 2.7 eV and extend the photoresponse to visible light region. The photocatalytic degradation rate of methyl orange and methylene blue are as high as 93.3% and 97.1% under visible-light illumination, respectively. The high degradation rate is attributed to the efficient doping of Ti{sup 3+} and Ce{sup 3+}, formation of surface oxygen vacancy and heterojunction, which favors the absorption of visible light and separation of photogenerated charge carriers.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Effects of electron beam irradiation on CrMnV and CrMnTiV high entropy alloys: Nano-mechanical, structural, and thermodynamic perspectives

Beam exit windows are crucial components of any particle accelerator as they provide an interface between the beamline vacuum and target material at atmospheric media. For high beam power machines, special materials and designs are required to withstand high radiation and mechanical loads, while minimizing energy loss during transition and maximizing window lifetime. This research investigates the impact of electron beam exposure to bulk CrMnV and CrMnTiV high entropy alloys (HEAs) with the primary goal of identifying suitable candidate materials for the design of robust and durable exit window settings. The selection criteria include intrinsic characteristics, power dissipation, and mechanical responses. According to the thermodynamic calculations, both equiatomic CrMnV and the addition of 7% of Ti with equiatomic CrMnV yield solid-solutions phases. The structural and mechanical properties of CrMnV and CrMnTiV samples were tested using field emission scanning electron microscopy, atomic force microscopy, scanning electron microcopy with energy dispersive x-ray spectroscopy, x-ray diffraction, and nanoindentation before and after exposure to a dose of ~66 kGy from a 10 MeV e-beam accelerator. Despite exhibiting beam transmission characteristics comparable to Cr and V, the indentation hardness of HEAs exceeded that of the Cr and V samples by five to six times. The examination of the CrMnTiV irradiated samples revealed organized deformation patterns depicting new features, which we suspect twinning and twin boundaries due to the addition of Ti to CrMnV. Ti, a hexagonal-close-packed crystal structure, is commonly known for deformation twinning behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Investigation of the Effect of Residual Stress Gradient on the Wear Behavior of PVD Thin Films

The control of residual stresses has been seldom investigated in multilayer coatings dedicated to improvement of wear behavior. Here, we report the preparation and characterization of superposed structures composed of Cr, CrN and CrAlN layers. Nano-multilayers CrN/CrAlN and Cr/CrN/CrAlN were deposited by Physical Vapor Deposition (PVD) onto Si (100) and AISI4140 steel substrates. The Cr, CrN and CrAlN monolayers were developed with an innovative approach in PVD coatings technologies corresponding to deposition with different residual stresses levels. Composition and wear tracks morphologies of the coatings were characterized by scanning electron microscopy, high-resolution transmission electron microscopy, atomic force microscopy, x-ray photoelectron spectroscopy, energy-dispersive x-ray spectroscopy, x-ray diffraction and 3D-surface analyzer. The mechanical properties (hardness, residual stresses and wear) were investigated by nanoindentation, interferometry and micro-tribometry (fretting-wear tests). Observations suggest that multilayer coatings are composed mostly of nanocrystalline. The residual stresses level in the films has practically affected all the physicochemical and mechanical properties as well as the wear behavior. Consequently, it is demonstrated that the coating containing moderate stresses has a better wear behavior compared to the coating developed with higher residual stresses. The friction contact between coated samples and alumina balls shows also a large variety of wear mechanisms. In particular, the abrasive wear of the coatings was a combination of plastic deformation, fine microcracking and microspallation. The application of these multilayers will be wood machining of green wood.

36 MATERIALS SCIENCE↗