Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WHISPER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Flexible Micropost Arrays for Shear Stress Measurement

Increased fuel costs, heightened environmental protection requirements, and noise abatement continue to place drag reduction at the forefront of aerospace research priorities. Unfortunately, shortfalls still exist in the fundamental understanding of boundary-layer airflow over aerodynamic surfaces, especially regarding drag arising from skin friction. For example, there is insufficient availability of instrumentation to adequately characterize complex flows with strong pressure gradients, heat transfer, wall mass flux, three-dimensionality, separation, shock waves, and transient phenomena. One example is the acoustic liner efficacy on aircraft engine nacelle walls. Active measurement of shear stress in boundary layer airflow would enable a better understanding of how aircraft structure and flight dynamics affect skin friction. Current shear stress measurement techniques suffer from reliability, complexity, and airflow disruption, thereby compromising resultant shear stress data. The state-of-the-art for shear stress sensing uses indirect or direct measurement techniques. Indirect measurements (e.g., hot-wire, heat flux gages, oil interferometry, laser Doppler anemometry, small scale pressure drag surfaces, i.e., fences) require intricate knowledge of the studied flow, restrictive instrument arrangements, large surface areas, flow disruption, or seeding material; with smaller, higher bandwidth probes under development. Direct measurements involve strain displacement of a sensor element and require no prior knowledge of the flow. Unfortunately, conventional "floating" recessed components for direct measurements are mm to cm in size. Whispering gallery mode devices and Fiber Bragg Gratings are examples of recent additions to this type of sensor with much smaller (m) sensor components. Direct detection techniques are often single point measurements and difficult to calibrate and implement in wind tunnel experiments. In addition, the wiring, packaging, and installation of delicate micro-electromechanical devices impede the use of most direct shear sensors. Similarly, the cavity required for sensing element displacement is sensitive to particulate obstruction. This work was focused on developing a shear stress sensor for use in subsonic wind tunnel test facilities applicable to an array of test configurations. The non-displacement shear sensors described here have minimal packaging requirements resulting in minimal or no disturbance of boundary layer flow. Compared to previous concepts, device installation could be simple with reduced cost and down-time. The novelty lies in the creation of low profile (nanoscale to 100 μm) micropost arrays that stay within the viscous sub-layer of the airflow. Aerodynamic forces, which are related to the surface shear stress, cause post deflection and optical property changes. Ultimately, a reliable, accurate shear stress sensor that does not disrupt the airflow has the potential to provide high value data for flow physics researchers, aerodynamicists, and aircraft manufacturers leading to greater flight efficiency arising from more in-depth knowledge on how aircraft design impacts near surface properties.

Wohl, Christopher J.↗

Microsphere Integration in Active and Passive Photonics Devices

An important step towards integration of microspheres in compact functional photonics devices, we demonstrate direct efficient coupling of light in and out of high-Q whispering-gallery (WG) modes in silica microspheres using angle-polished single mode fibers.

photonics↗

Optical vortices with large orbital momentum : generation and interference

We demonstrate a method for generation of beams of light with large angular momenta. The method utilizes whispering gallery mode resonators that transform a plane electromagnetic wave into high order Bessel beams. Interference pattern among the beams as well as shadow pictures induced by the beams are observed and studied.

Maleki, Lute↗

MCNP Progress & Performance Improvements

Twenty-eight slides give information about the work of the US DOE/NNSA Nuclear Criticality Safety Program on MCNP6 under the following headings: MCNP6.1.1 Release, with ENDF/B-VII.1; Verification/Validation; User Support & Training; Performance Improvements; and Work in Progress. Whisper methodology will be incorporated into the code, and run speed should be increased.

42 ENGINEERING↗

Validation of MCNP Critical Benchmarks Models of Highly Enriched Uranium Cylinders

A new centralized repository of high-quality MCNP models of critical benchmark experiments is currently under development at Los Alamos National Laboratory (LANL). The benchmark experiments are described in the International Criticality Safety Benchmark Evaluation Project (ICSBEP) Handbook, and the initial set of benchmark models are derived from the Whisper Suite provided with MCNP6.2. This effort is a collaboration among the Nuclear Criticality Safety, Nuclear Data, and Monte Carlo code development/application organization at LANL. The objective is to create a current single LANL benchmark collection that includes the latest ICSBEP revision that has a formal review and revision process, is contained in an open- source repository, and utilizes new Python tools for improved input and output file review.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Investigations into validation of plutonium solutions for criticality safety analysis

Plutonium solution chemistry is among the most complex of all the elements in the periodic table. Under acidic conditions up to four different oxidation states can be present in significant amounts in a single solution. From the perspective of nuclear criticality safety, accurate information regarding the concentration of plutonium and other constituents in solution must be well-known in order to correctly model plutonium solution systems for analysis. This requires knowledge of the solution system along with the ability to make accurate assumptions and predictions of the chemical and physical properties of the solution system. If neutron transport methods are used to assess subcriticality in a nuclear criticality safety analysis, the models must be compared with benchmark experiments which are similar and the suitability of the computer code system must be quantified. This paper describes some investigations undertaken to support the validation of plutonium solution systems for nuclear criticality safety analysis and how the Whisper sensitivity/uncertainty (S/U) tool can provide information to support validation of such systems. Case study results for various solution systems such as aqueous plutonium nitrate, aqueous plutonium chloride and hypothetical metal-water mixture are presented. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

MCNP Progress for the Nuclear Criticality Safety Program

The DOE/NNSA Nuclear Criticality Safety Program (NCSP) supports research, development, maintenance, and verification and validation of the MCNP{sup R} Monte Carlo radiation transport software package for nuclear criticality safety (NCS) customers within DOE/NNSA. The MCNP Monte Carlo code has been used for high-fidelity analyses of criticality safety problems since the 1970's. This paper summarizes MCNP progress during FY 2015 and early FY 2016. Activities and accomplishments are summarized in five major areas: - MCNP6 status, - Whisper status, - Verification and validation testing, - User support and training, - Work in progress. (authors)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Resonance-Enhanced Absorption in Hollow Nanoshell Spheres with Omnidirectional Detection and High Responsivity and Speed

Optical resonance formed inside a nanocavity resonator can trap light within the active region and hence enhance light absorption, effectively boosting device or material performance in applications of solar cells, photodetectors (PDs), and photocatalysts. Complementing conventional circular and spherical structures, a new type of multishelled spherical resonant strategy is presented. Due to the resonance–enhanced absorption by multiple convex shells, ZnO nanoshell PDs show improved optoelectronic performance and omnidirectional detection of light at different incidence angles and polarization. In addition, the response and recovery speeds of these devices are improved (0.8 and 0.7 ms, respectively) up to three orders of magnitude faster than in previous reports because of the existence of junction barriers between the nanoshells. As a result, the general design principles behind these hollow ZnO nanoshells pave a new way to improve the performance of sophisticated nanophotonic devices.

36 MATERIALS SCIENCE↗

Hybrid Optical–Thermal Antennas for Enhanced Light Focusing and Local Temperature Control

Metal nanoantennas supporting localized surface plasmon resonances have become an indispensable tool in bio(chemical) sensing and nanoscale imaging applications. The high plasmon-enhanced electric field intensity in the visible or near-IR range that enables the above applications may also cause local heating of nanoantennas. We present a design of hybrid optical–thermal antennas that simultaneously enable intensity enhancement at the operating wavelength in the visible and nanoscale local temperature control. We demonstrate a possibility to reduce the hybrid antenna operating temperature via enhanced infrared thermal emission. We predict via rigorous numerical modeling that hybrid optical–thermal antennas that support high-quality-factor photonic-plasmonic modes enable up to 2 orders of magnitude enhancement of localized electric fields and of the optical power absorbed in the nanoscale metal volume. At the same time, the hybrid antenna temperature can be lowered by several hundred degrees with respect to its all-metal counterpart under continuous irradiance of 104–105 W/m2. The temperature reduction effect is attributed to the enhanced radiative cooling, which is mediated by the thermally excited localized surface phonon polariton modes. We further show that temperature reduction under even higher irradiances can be achieved by a combination of enhanced radiative and convective cooling in hybrid antennas. To conclude, we demonstrate how hybrid optical–thermal antennas can be used to achieve strong localized heating of nanoparticles while keeping the rest of the optical chip at low temperature.

42 ENGINEERING↗

On Quantum Rainbows: Density Operator in the Frequency-Bin Representation for Entangled Twin-Photons Generated With Sub-Threshold Microcombs

Kerr optical frequency combs are generated by pumping a high-Q integrated microresonator with a resonant laser. Below threshold, the pump laser field mediates the phenomenon of spontaneous four-wave mixing, where two pump photons are symmetrically up- and down-converted as twin photons that can be entangled across up to tens of eigenmodes in the spectral domain. While these room-temperature integrated photonic circuits are expected to play a central role in quantum technology, their high dimensionality and dissipative nature are a challenge for their theoretical description, therefore hindering the understanding of their properties and potential of performance. In this article, we develop a framework that permits to obtain an explicit solution for the density operator of quantum microcombs below threshold. Furthermore, this self-consistent theoretical description allows for their complete characterization, as well as for the analytical determination of various performance metrics such as fidelity, purity, and entropy.

42 ENGINEERING↗

A characterization of quantum Kerr optical frequency combs

Quantum Kerr optical frequency combs are generated by pumping a high-Q microresonator with a continuous wave resonant laser. Below threshold, two pump photons are symmetrically up- and down-converted as twin photons via spontaneous four-wave mixing, thereby generating up to a hundred paired channels. Furthermore, these chipscale, high-dimensional and room-temperature systems are expected to play a major role in quantum engineering. However, their theoretical description is still unclear. Here, we present an explicit description of this quantum system via a frequency-bin state and its density operator, and explore the properties of the eigenkets.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

S/U Comparison Study with a Focus on USLs

Under a DOE Nuclear Criticality Safety Program (NCSP) task involving Analytical Methods, three Laboratories collaborated in a comparison of results obtained from Sensitivity/Uncertainty (S/U) packages relevant to validation of transport codes. The task involves Institut de Radioprotection et de Sûreté Nucléaire (IRSN), Los Alamos National Laboratory (LANL), and Oak Ridge National Laboratory (ORNL) comparing results of MORET 5/MACSENS V3.0, MCNP6.2/Whisper-1.1, and SCALE 6.2.3/TSUNAMI/USLSTATS respectively. All Monte Carlo transport code results utilize ENDF/B-VII.1. Four cases from the International Handbook of Evaluated Criticality Safety Benchmark Experiments (ICSBEP Handbook) were selected as application models: HEU-MET-FAST-013-001, HEU-SOL-THERM 001-008, PU-MET-FAST-022-001, and PU-SOL-THERM 001-001. Ultimately, comparison is made between Upper Subcritical Limits (USLs) obtained using each code package for each application case. Since differences exist in whether packages take into account margin of subcriticality (MOS), the USL may be computed using bias and bias uncertainty, also known as the calculational margin (CM) in ANSI/ANS 8.24. Application of portions of MOS to the USL for nuclear data uncertainty of and potential code margin is referred to as USL herein. In either case, additional MOS is considered for actual application cases.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Investigation of Application Specific k eff Sensitivities to Existing and New Subcritical and Critical Experiments

Integral subcritical and critical experiments are essential in providing validation of computational codes which improve confidence in the predicted k eff results of specific applications. This work discusses the relevance of existing integral subcritical and critical experiments to applications far reaching across the nuclear complex. These applications include Travelling Wave Reactors (TWR), Kilopower Reactor Using Stirling Technology (KRUSTY), and plutonium reflected by tantalum. The primary goal of this work is to improve knowledge of energy-dependent cross-section sensitivities for specific applications, identify nuclear data gaps in existing experiments, enable an optimized design of new experiments to address these gaps, and design practical new experiments that could be executed at the National Criticality Experiments Research Center (NCERC) that have a high-value to these applications.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Sensitivity-Uncertainty Techniques for Nuclear Criticality Safety

The sensitivity and uncertainty analysis course will introduce students to k eff sensitivity data, cross-section uncertainty data, how k eff sensitivity data and k eff uncertainty data are generated and how they can be used. Discussion will include how sensitivity/uncertainty data can be used to select applicable critical experiments, to quantify a defensible margin to cover validation gaps and weaknesses, and in development of upper subcritical limits.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

FY21 MCNP ® Updates for the Nuclear Criticality Safety Program [Slides]

LANL has devoted a substantial amount effort toward the MCNP6.3 release over the past year by improving many of their processes, infrastructure, and capabilities. Many new resources in support of the MCNP code and DOE NCSP applications are coming online now. LANL is excited to receive feedback on all of the new and improved capabilities that will be packaged with MCNP6.3.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Comparison of the Baseline USL Calculation Methods for Loosely-Coupled and Novel Neutronic Systems [Slides]

Current work includes reconstructing 187-group ENDF B/VII.1 covariance matrix for comparison study to 44-group ENDF B/VII.1 matrix to determine how covariance matrix structures affect the USL calculations and investigating the exact domination mechanism of region-wise sensitivities in a loosely-coupled system. Future work will involve seeking to understand how bias distributions change with reactivity and how to calculate propagate distribution error into USL calculations, as well as how cross section perturbation studies can be extended to other types of calculations, such as shielding calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗