Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WAVEGUIDE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Generation of the second harmonic in ridge waveguides formed in periodically poled lithium niobate

Generation of the second harmonic of semiconductor laser radiation in the IR range (980 – 1140 nm) in ridge waveguides with a large refractive index step, formed in periodically poled nonlinear LiNbO{sub 3} crystals, is demonstrated. Ridge waveguides have been prepared by precise cutting using a diamond microsaw. Spectral dependences of the SHG power and intensity distributions in the near field of second harmonic and pump radiations have been measured. The results obtained indicate good prospects of designing tunable laser radiation sources in the visible range due to the SHG in ridge waveguides formed in periodically poled nonlinear crystals under semiconductor laser pumping. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mode loss spectra in THz quantum-cascade lasers with gold- and silver-based double metal waveguides

Spectra of the waveguide loss coefficient for THz radiation of a quantum-cascade laser with a gold- and silver-based double metal waveguide (DMW) are calculated based on the measurements of resistivity of the metals for different temperatures. It is shown that, taking into account the absorption of THz radiation by free carriers and optical phonons, the spectrum of total mode losses has a broad minimum in the range of 3 – 6 THz, which shifts to higher frequencies with increasing temperature. The minimum losses in the Au-based waveguide increase from 8 to 27 cm{sup –1} as temperature increases from 100 to 300 K. The use of an Ag-based DMW makes it possible to decrease the losses by 2 – 4 cm{sup –1} compared to the Au-based DMW. The bibliography includes 21 references. (terahertz radiation)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

MODEL COMPARISON FOR THE DENSITY STRUCTURE ACROSS SOLAR CORONAL WAVEGUIDES

The spatial variation of physical quantities, such as the mass density, across solar atmospheric waveguides governs the timescales and spatial scales for wave damping and energy dissipation. The direct measurement of the spatial distribution of density, however, is difficult, and indirect seismology inversion methods have been suggested as an alternative. We applied Bayesian inference, model comparison, and model-averaging techniques to the inference of the cross-field density structuring in solar magnetic waveguides using information on periods and damping times for resonantly damped magnetohydrodynamic transverse kink oscillations. Three commonly employed alternative profiles were used to model the variation of the mass density across the waveguide boundary. Parameter inference enabled us to obtain information on physical quantities such as the Alfvén travel time, the density contrast, and the transverse inhomogeneity length scale. The inference results from alternative density models were compared and their differences quantified. Then, the relative plausibility of the considered models was assessed by performing model comparison. Our results indicate that the evidence in favor of any of the three models is minimal, unless the oscillations are strongly damped. In such a circumstance, the application of model-averaging techniques enables the computation of an evidence-weighted inference that takes into account the plausibility of each model in the calculation of a combined inversion for the unknown physical parameters.

79 ASTRONOMY AND ASTROPHYSICS↗

Quantum-dot photon dynamics in a coupled-cavity waveguide: Observing band-edge quantum optics

We introduce a tight-binding approach to model the emission dynamics of a quantum-dot in realistic, photonic-crystal-slab coupled-cavity systems. We apply our approach to a quantum-dot strongly coupled at the band edge of a lossy coupled-cavity waveguide and calculate the quantum-dot dynamics as well as the photon dynamics along the waveguide. We show that the condition for strong coupling is simply parametrized in terms of the waveguide loss and find that the key signature of the strong-coupling, Rabi oscillations, could be observed via time-resolved photon detection.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Scattering of two coherent photons inside a one-dimensional coupled-resonator waveguide

We consider the coherent propagation of n photons in a one-dimensional coupled-resonator waveguide for n=2,3,4.... The scattering by a three-level atom, which resides in one of the resonators of the waveguide and gives rise to only two-photon transitions, results in a perfect quantum switch that allows either total reflection or total transmission. This is to be contrasted to the case of a single photon inside a one-dimensional resonant waveguide scattered by a two-level system with single-photon transitions where only total reflection can be accomplished; viz. the system behaves only as a perfect mirror but not as an ideal, transparent medium.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Inhibition of light tunneling for multichannel excitations in longitudinally modulated waveguide arrays

We consider the evolution of multichannel excitations in longitudinally modulated waveguide arrays where the refractive index either oscillates out-of-phase in all neighboring waveguides or when it is modulated in phase in several central waveguides surrounded by out-of-phase oscillating neighbors. Both types of modulations allow resonant inhibition of light tunneling, but only the modulation of the latter type conserves the internal structure of multichannel excitations. We show that parameter regions where light tunneling inhibition is possible depend on the symmetry and structure of multichannel excitations. Antisymmetric multichannel excitations are more robust than their symmetric counterparts and experience nonlinearity-induced delocalization at higher amplitudes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Controllable optical Bloch oscillation in planar graded optical waveguide arrays

Optical Bloch oscillation is studied theoretically in planar graded optical waveguide arrays with nearest-neighbor couplings. The gradient in the propagation constants can be achieved with the eletro-optical effect. We identify a variety of normal modes (called gradons) in the waveguide arrays with the aid of a phase diagram. Moreover, the localization properties of the normal modes are characterized and the transitions among these modes are obtained from a picture of overlapping bands. The existence of Bloch oscillation and other oscillations are confirmed by using the field-evolution analysis with various input Gaussian beams. From the results, we obtain a correspondence between gradon localization and Bloch oscillation. This study can be extended to more general waveguide arrays in higher dimensions and with further neighbor couplings. The results offer great potential applications in controlling wave propagation by means of graded materials and graded systems, which can be used to explore the tunability of light manipulation and applied to design suitable optical devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Wave propagation in waveguide arrays with alternating positive and negative couplings

We introduce a waveguide array model with alternating positive and negative couplings between adjacent waveguides. Two different settings where such a model can be realized are identified as arrays of defects in Bragg gratings and arrays with propagation constants that periodically vary along the propagation direction. We analyze the properties of wave propagation in such waveguide arrays and find several interesting properties that have no counterpart in the case of arrays with constant couplings. These include the beam self-splitting, self-induced Talbot oscillations, symmetric evolution of Bloch oscillations, and new families of lattice solitons.

74 ATOMIC AND MOLECULAR PHYSICS↗

Molecular quantum wakes in the hydrodynamic plasma waveguide in air

We demonstrate a modulated plasma guiding effect from the molecular alignment wakes in the hydrodynamic plasma waveguide. A properly time-delayed laser pulse can be spatially confined by the hydrodynamic expansion induced plasma waveguide of an advancing femtosecond laser pulse. The spatial confinement can be further strengthened or weakened by following the quantum wakes of the impulsively excited rotational wave packets of the molecules in the plasma waveguide.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Arrayed and checkerboard optical waveguides controlled by the electromagnetically induced transparency

We introduce two models of quasidiscrete optical systems: an array of waveguides doped by four-level N-type atoms, and a nonlinear checkerboard pattern, formed by doping with three-level atoms of the {Lambda}-type. The dopant atoms are driven by external fields, to induce the effect of the electromagnetically induced transparency (EIT). These active systems offer advantages and additional degrees of freedom, in comparison with ordinary passive waveguiding systems. In the array of active waveguides, the driving field may adjust linear and nonlinear propagation regimes for a probe signal. The nonlinear checkerboard system supports the transmission of stable spatial solitons and their 'fuzzy' counterparts, straight or oblique.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Beams of gravitationally bound ultracold neutrons in rough waveguides

We investigate the propagation of ultracold neutrons through a rough waveguide in conjunction with recent experiments in which the ultracold neutrons were beamed between a perfect mirror and a rough scatterer and absorber. The main goal is to find a way to resolve the lowest gravitationally quantized discrete states in the peV range. We compare the neutron count for various types of mirrors with Gaussian, power-law, and exponential correlation functions of surface inhomogeneities. The main conclusion is that all the information about inhomogeneities, including their amplitude, correlation radius, and the rate of decay of the correlation function, enter the exit neutron count via just a single constant {Phi}, which effectively renormalizes the amplitude of roughness. To observe well-defined quantum steps, one should have an experimental setup with {Phi}>40. For a wide variety of correlation functions, the constant {Phi} is proportional to the square of the amplitude of the surface roughness and is inversely proportional to the square root of the correlation radius. The strong dependence of {Phi} on roughness parameters and the shape of the correlation function opens a novel way for improving the resolution of gravitationally bound states by optimizing the roughness pattern without reverting to an undesirable strong roughness. We discuss how to optimize the scatterer and absorber by first generating numerically the desired roughness profile and then transferring it to the mirror. We also study the effect of beam preparation on the initial occupancies of gravitational states before the beam enters the waveguide. It turns out that there are simple ways to manipulate the beam in front of the waveguide that can help to resolve the gravitationally bound quantum states. Our results are in good agreement with available experimental data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-Transmission Planar X-Ray Waveguides

We have studied the propagation of hard x rays in a planar x-ray waveguide with a sub-20 nm guiding layer. To optimize the transmission and to minimize absorption losses, a novel waveguide design based on a two-component cladding was implemented. Optimized transmission is achieved by placing an appropriate interlayer between the cladding and the guiding core. The experimental results along with simulations of field propagation show that high transmission values can be obtained in waveguide optics at parameters relevant for x-ray imaging. These are small beam diameters below 20 nm and the relatively long guiding length necessary for efficient blocking of multi-keV photon energy beams.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Design and High-Power Test of an Internal Coupler to HE 11 Mode in Corrugated Waveguide for High-Power Gyrotrons

Gyrotrons produce power in high-order, transverse electric modes that are typically converted to a Gaussian beam inside the tube. In fusion plasma heating applications, the power is transmitted through a diamond window to an external mirror optical unit where it is coupled into an HE 11 mode in corrugated waveguide. A new coupler is described that couples the cavity RF power directly into corrugated waveguide inside the gyrotron. A high power gyrotron with the improved coupler was tested using 1-MW, 3-μs pulses and demonstrated equivalent power and efficiency as a traditional coupler with HE 11 mode output in corrugated waveguide. In addition, higher HE 11 mode purity was achieved at the gyrotron output.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fabrication of metallic nano-slit waveguides with sharp bends.

Metallic nanoslit waveguides are promising candidates for ultrahigh-density optical interconnections. A variety of devices based on metallic nanoslit waveguides have already been proposed that show a great superiority over conventional photonic devices for compactness. However very few two-dimensional devices have been experimentally demonstrated with in-plane geometries due to fabrication difficulties. In this article, a feasible process is presented using traditional semiconductor fabrication technologies such as mix-and-match lithography and electroplating, which is capable of fabricating complicated 100 nm wide, 800 nm deep gold slit waveguides with multiple sharp right-angle corners. The process can be extended to volume production manufacturing with minor modifications, thus enabling the fabrication of nanoslit photonic circuits and networks.

42 ENGINEERING↗

Waveguide modes of 1D photonic crystals in a transverse magnetic field

We analyze waveguide modes in 1D photonic crystals containing layers magnetized in the plane. It is shown that the magnetooptical nonreciprocity effect emerges in such structures during the propagation of waveguide modes along the layers and perpendicularly to the magnetization. This effect involves a change in the phase velocity of the mode upon reversal of the direction of magnetization. Comparison of the effects in a nonmagnetic photonic crystal with an additional magnetic layer and in a photonic crystal with magnetic layers shows that the magnitude of this effect is several times larger in the former case in spite of the fact that the electromagnetic field of the modes in the latter case is localized in magnetic regions more strongly. This is associated with asymmetry of the dielectric layers contacting with the magnetic layer in the former case. This effect is important for controlling waveguide structure modes with the help of an external magnetic field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Channeling of Neutrons in the Potential Well of a Planar Waveguide

The channeling of neutrons in a three-layer planar waveguide with a neutron-optical potential well is studied. Neutrons incident on a sample surface, which propagate in a middle layer and escape from the waveguide end in the form of a narrow divergent beam, are detected. The decay parameter of a neutron wave inside the waveguide is measured as a function of the potential well depth. Experimental results are compared with a theory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Method of adiabatic modes in studying problems of smoothly irregular open waveguide structures

Basic steps in developing an original method of adiabatic modes that makes it possible to solve the direct and inverse problems of simulating and designing three-dimensional multilayered smoothly irregular open waveguide structures are described. A new element in the method is that an approximate solution of Maxwell's equations is made to obey 'inclined' boundary conditions at the interfaces between themedia being considered. These boundary conditions take into account the obliqueness of planes tangent to nonplanar boundaries between the media and lead to new equations for coupled vector quasiwaveguide hybrid adiabatic modes. Solutions of these equations describe the phenomenon of 'entanglement' of two linear polarizations of an irregular multilayered waveguide, the appearance of a new mode in an entangled state, and the effect of rotation of the polarization plane of quasiwaveguide modes. The efficiency of the method is demonstrated by considering the example of numerically simulating a thin-film generalized waveguide Lueneburg lens.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Azimuthally asymmetric eigenmodes of a magnetized plasma cylinder around a dielectric rod in a circular waveguide

The electrodynamics of a circular waveguide with a dielectric rod surrounded by a magnetized plasma layer is considered. A general dispersion relation for azimuthally asymmetric perturbations is derived, and its solutions describing slow waves-specifically, electromagnetic and plasma modes, as well as (and primarily) hybrid waves that combine the properties of both mode types-are investigated numerically. For the fundamental waveguide mode of the system-the HE{sub 11} mode-the parameters of the plasma layer are determined at which the mode cannot be subject to Cherenkov interaction with a relativistic electron beam at a given frequency. For both waveguide and plasma modes, the radial profiles of the longitudinal components of the electric field and Poynting vector, the fractions of RF power carried within the dielectric and plasma regions and vacuum gap, and the coupling impedance are calculated as functions of the parameters of the plasma layer. The evolution of the field structure during the formation of asymmetric hybrid waves is traced. The results of calculating the dispersion and coupling impedance are analyzed as applied to an antenna-amplifier-a relativistic traveling-wave tube operating on the HE{sub 11} mode of the dielectric rod: specifically, the implementability of the concept in the presence of a plasma at the rod surface is estimated, and the possible role of azimuthally asymmetric and symmetric plasma modes is examined.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗