Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Voids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Relationship of EUV Irradiance Coronal Dimming Slope and Depth to Coronal Mass Ejection Speed and Mass

Extreme ultraviolet (EUV) coronal dimmings are often observed in response to solar eruptive events. These phenomena can be generated via several different physical processes. For space weather, the most important of these is the temporary void left behind by a coronal mass ejection (CME). Massive, fast CMEs tend to leave behind a darker void that also usually corresponds to minimum irradiance for the cooler coronal emissions. If the dimming is associated with a solar are, as is often the case, the are component of the irradiance light curve in the cooler coronal emission can be isolated and removed using simultaneous measurements of warmer coronal lines. We apply this technique to 37dimming events identified during two separate two-week periods in 2011, plus an event on 2010 August 7 analyzed in a previous paper, to parameterize dimming in terms of depth and slope. We provide statistics on which combination of wavelengths worked best for the flare-removal method, describe the fitting methods applied to the dimming light curves, and compare the dimming parameters with corresponding CME parameters of mass and speed. The best linear relationships found are nu(sub CME) [km/s] approx. equals 2.36 x 10 6 [km/%] x s(sub dim) [%/s] m(sub CME) [g] approx. equals 2.59 x 10(exp.15 [g/%] x the square root of d(sub dim) [%].These relationships could be used for space weather operations of estimating CME mass and speed using near-real-time irradiance dimming measurements.

Mason, James Paul↗
NASA NTRS2016

NASADEM Global Elevation Model: Methods and Progress

NASADEM (NASA Digital Elevation Model) is a near-global elevation model that is being produced primarily by completely reprocessing the Shuttle Radar Topography Mission (SRTM) radar data and then merging it with refined ASTER (Advanced Spaceborne Thermal Emission and Reflection Radiometer) GDEM (Global Digital Elevation Model) elevations. The new and improved SRTM elevations in NASADEM result from better vertical control of each SRTM data swath via reference to ICESat (Ice, Cloud, and land Elevation Satellite) elevations and from SRTM void reductions using advanced interferometric unwrapping algorithms. Remnant voids will be filled primarily by GDEM3, but with reduction of GDEM glitches (mostly related to clouds) and therefore with only minor need for secondary sources of fill.

GDEM↗
NASA NTRS2019

Return to Service of a Liquid Hydrogen Storage Sphere

One, of two, 850,000 gallon liquid hydrogen storage spheres, at NASA's Kennedy Space Center, was decommissioned in 2010. This tank had an abnormally high heat leak that was investigated and determined to be the result of a large void in the perlite insulation. The insulation void was subsequently filled, and the tank was refurbished for its planned use in the Space Launch Systems (SLS) program. Return to service of this tank began in December of 2017 with a partial liquid hydrogen fill. Since that time, routine measurement of the liquid level have been recorded in order to establish a new boiloff rate and associated heat leak. This data shows the perlite top off activities have resulted in a much reduced, and within design specification, heat leak.

air leak↗
NASA NTRS2019

Return to Service of a Liquid Hydrogen Storage Sphere

One, of two, 850,000 gallon liquid hydrogen storage spheres, at NASA's Kennedy Space Center, was decommissioned in 2010. This tank had an abnormally high heat leak that was investigated and determined to be the result of a large void in the perlite insulation. The insulation void was subsequently filled, and the tank was refurbished for its planned use in the Space Launch Systems (SLS) program. Return to service of this tank began in December of 2017 with a partial liquid hydrogen fill. Since that time, routine measurement of the liquid level have been recorded in order to establish a new boiloff rate and associated heat leak. This data shows the perlite top off activities have resulted in a much reduced, and within design specification, heat leak.

Krenn, A. G.↗
NASA NTRS2019

The SDO/EVE Solar Irradiance Coronal Dimming Index Catalog. I. Methods and Algorithms

When a coronal mass ejection departs, it leaves behind a temporary void. That void is known as coronal dimming, and it contains information about the mass ejection that caused it. Other physical processes can cause parts of the corona to have transient dimmings, but mass ejections are particularly interesting because of their influence in space weather. Prior work has established that dimmings are detectable even in disk-integrated irradiance observations, i.e., Sun-as-a-star measurements. The present work evaluates four years of continuous Solar Dynamics Observatory Extreme Ultraviolet Experiment (EVE) observations to greatly expand the number of dimmings we may detect and characterize, and collects that information into James’s EVE Dimming Index catalog. This paper details the algorithms used to produce the catalog, provides statistics on it, and compares it with prior work. The catalog contains 5051 potential events (rows), which correspond to all robustly detected solar eruptive events in this time period as defined by >C1 flares. Each row has a corresponding 27,349 elements of metadata and parameterizations (columns). In total, this catalog is the result of analyzing 7.6 million solar ultraviolet light curves.

James’s EVE Dimming Index (JEDI)↗
NASA NTRS2020

Resolution of Lava Tubes with Ground Penetrating Radar: The TubeX project

Remote sensing surveys of the Moon and Mars show evidence of lava tubes, which are potential safe havens for human crews and their equipment. Ground penetrating radar (GPR) can be used to map tubes because the void/rock interface at tube ceilings and floors strongly reflects radar pulses. We have tested the capacity of GPR to sense lava tube geometry at Lava Beds National Monument (LBNM) in California, USA. GPR and detailed LiDAR data are presented for two tubes: Skull Cave, with a few meters of overburden, diameter ~10-20 m, and a rubbly floor; and Valentine Cave, with similarly thin overburden, diameter ~1-3 meters, and a flatter smoother floor. On both caves GPR clearly resolves the ceiling and permits good estimates of the cave width as validated with LiDAR data. Where GPR fails, the primary cause is inferred to be strong out-of-plane effects due to complex 3D geometries. Recovery of the floor position requires migrating the GPR data with a 2D velocity model, as signal velocity is faster in void space. We find that floor position is recoverable in caves whose voids are taller than the radar wavelength (~3 m in this study). Forward modeling assuming planetary parameters suggests GPR should be similarly successful on the Moon or Mars.

S. Esmaeili↗
NASA NTRS2022

Vacuum Melt Infiltration of 2D Tyranno SA3® Ceramic Matrix Composites with Cr-25(wt.%)Si Intermetallic Alloy

The potential and limitations of vacuum melt infiltrating woven preforms of 2D Tyranno SA3 fibers with Cr-25(wt.%)Si alloy were investigated. Microstructural observations revealed that the volume fractions of open voids infiltrated by the molten metal varied between 3.7 and 10.0% irrespective of the magnitudes of the melt infiltration temperatures and hold times, which was attributed in part to substantial volatilization of the silicide charge based on computational thermodynamics. In the absence of experimental data, poor wettability of the melt could not be ruled out unambiguously. Other possible reasons are carefully examined and discarded. Ring microstructures were observed around the fibers mainly at the outer surfaces of the infiltrated preform, where the BN and chemical vapor infiltrated SiC coatings had vaporized in the high vacuum environment. In contrast, they were absent in the interior of the preform, where the coatings were still present with no evidence of molten metal attack of the coatings. Details of thermodynamic calculations are presented to confirm the volatilization of the BN and CVI SiC coatings thereby resulting in the ring microstructures due to the filling of voids by the molten silicide. It is concluded that successful melt infiltration of Tyranno SA3® with Cr-25%Si can be only achieved under sufficient positive pressure to prevent volatilization of the coatings and the molten silicide.

Cr-25%Si↗
NASA NTRS2022

A Discussion of the Failure of a Quad Diode Module and Efforts to Assure the Flight Spares

In 2019 the International Space Station (ISS) experienced an on on-orbit failure that affected 1 of 28 Battery Charge Discharge Units (BCDUs). Telemetry pointed to a short circuit failure of a Power Rectifier Quad Diode Module. Astronauts removed the failed unit from service which was then returned to Earth for failure analysis. The failure analysis confirmed that the quad diode module had failed short circuit. The investigation identified silver dendrites had grown on the insulated, sloped edge of the mesa semiconductor die of the failed diode and also a 2nd diode in the same quad diode module. Voids between the diode’s protective encapsulating ring and the die provided space within which dendrites were able to form and cause catastrophic failure. The NASA Engineering & Safety Center (NESC) convened a EEE Parts Sub-Team to investigate root cause and to assist with risk assessment for all of the flight diode modules (4 distinct production lots) and the flight spares (from a 5th lot). Analysis of the original diode manufacturer’s read and record screening test data identified some lots which contained diodes with parametric instabilities that could signal conditions suited for silver dendrite formation. Computed Tomography (CT) X-ray screening inspection was performed on flight spare modules to identify diodes that do not exhibit voids between the edge of die and encapsulating ring as a mitigation against dendrite formation.

Jay Brusse↗
NASA NTRS2024

Direct Ink Write 3D Printing of Fully Dense and Functionally Graded Liquid Metal Elastomer Foams

Liquid metal (LM) elastomer composites offer promising potential in soft robotics, wearable electronics, and human-machine interfaces. Direct ink write (DIW) 3D printing offers a versatile manufacturing technique capable of precise control over LM microstructures, yet challenges such as interfilament void formation in multilayer structures impact material performance. Here, a DIW strategy is introduced to control both LM microstructure and material architecture. Investigating three key process parameters–nozzle height, extrusion rate, and nondimensionalized nozzle velocity–it is found that nozzle height and velocity predominantly influence filament geometry. The nozzle height primarily dictates the aspect ratio of the filament and the formation of voids. A threshold print height based on filament geometry is identified; below the height, significant surface roughness occurs, and above the ink fractures, which facilitates the creation of porous structures with tunable stiffness and programmable LM microstructure. These porous architectures exhibit reduced density and enhanced thermal conductivity compared to cast samples. When used as a dielectric in a soft capacitive sensor, they display high sensitivity (gauge factor = 9.0), as permittivity increases with compressive strain. These results demonstrate the capability to simultaneously manipulate LM microstructure and geometric architecture in LM elastomer composites through precise control of print parameters, while maintaining geometric fidelity in the printed design.

Spencer Pak↗
NASA NTRSDate not supplied

The Kinematic Navigation and Cartography Knapsack (KNaCK): Demonstrating SLAM (Simultaneous Localization and Mapping) LiDAR as a Tool for Exploration and Mapping of Lunar Pits and Caves.

Renewed interest in deep space exploration has made establishing a persistent human presence on the Moon and eventually Mars a priority. Sustained habitation of the Moon will require in-situ resource utilization (ISRU) and protection from radiation at the lunar surface. Lunar caves are of interest to the space community because they could provide shelter from radiation, access to water deposits, and a space for habitation, as well as hold information about the geology, volcanology, and evolution of the Moon. Developing the tools to explore, map, and characterize these voids is key to understanding the Moon as a planetary body and to establishing a permanent human presence there. Our team is currently developing tools that enable ultra-high resolution terrain mapping and navigation using mobile light detection and ranging (LIDAR) technology and simultaneous localization and mapping (SLAM) algorithms in fully GPS-denied and no-light environments. 3D mapping with LiDAR and SLAM is relatively under-used, particularly in the context of planetary exploration and planetary analog environments. The backpack mounted LiDAR instrument currently under development by the KNaCK (Kinematic Navigation and Cartography Knapsack) team has demonstrated the potential of mobile SLAM LiDAR for lunar, planetary, and terrestrial cave exploration, study, and utilization. A description of the instrument and associated SLAM algorithms used for mapping in GPS-denied environments are referenced here.

LiDAR↗
NASA NTRS1962

Collected Papers on Instability of Shell Structures - 1962

Shell structures are important components of airplanes, missiles, and space vehicles, but present capabilities for predicting the local and general instability of many such structures are inadequate. A large effort continues to be devoted to the stability analysis of shell structures, and considerable progress has been made. Results are slowly disseminated, however, and many engaged in research are not fully cognizant of the problems and practices of the vehicle designers who utilize research results. Therefore, an NASA SYMPOSIUM ON INSTABILITY OF SKELL STRUCTURES was organized by the Langley Research Center with sessions held there on October 24 and 25, 1962. Participants were limited to persons contributing papers and to certain officials of the U.S. Government. This symposium was planned to provide those persons concerned with shell instability at research laboratories, at educational institutions, and in the aerospace industry with a comprehensive view of the present state of the art, including the voids in present knowledge, important current problems, and the most fruitful directions for future theoretical and experimental research on the instability of all types of shell structures. Individuals actively engaged in research on shell stability or design were invited to contribute written papers for inclusion in a compilation to be distributed to the participants prior to the symposium. A few papers were selected by a steering committee for oral presentation at the symposium. Provision was made, also, for a discussion of all papers.

MISSILE↗
NASA NTRS1966

Copper foil provides uniform heat sink path

Thermal path prevents voids and discontinuities which make heat sinks in electronic equipment inefficient. The thermal path combines the high thermal conductivity of copper with the resiliency of silicone rubber.

Phillips, I. E., Jr.↗
NASA NTRS1966

Epoxy blanket protects milled part during explosive forming

Epoxy blanket protects chemically milled or machined sections of large, complex structural parts during explosive forming. The blanket uniformly covers all exposed surfaces and fills any voids to support and protect the entire part.

Source record↗