Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Effect of property variations on the mixing of turbulent supercritical water streams in a T-junction

The supercritical water mixing phenomenon is investigated with a wide range of conditions, i.e. the inlet temperature of the streams ranges from 323.15 K to 723.15 K and the pressure ranges from 25 MPa to 45 MPa. A sensitivity study is carried out for the jet and main flow velocity ratio (VR) which is varying from 1 to 40. In addition, the effect of the inject angles of branch flow to main flow on the mixing is conducted by varying the inject angle from 80 deg. to 100 deg.. The results show that the maximum temperature gradient appears on the wall of the upstream side in all the cases, and the inclined angles can be optimized to mitigate the thermal stress. (authors)

42 ENGINEERING↗

The Design and Performance of Low Cost Haptic Interfaces to Control Precision Nuclear Robotic System - 18351

Nuclear decommissioning environments are challenging and hazardous, typically involving high temperatures, pressures and extreme radiation. Robotic devices are commonly used to complete tasks within challenging environments, which would otherwise pose a risk to human health, however remotely operating robots without full three-dimensional vision is challenging, and operators of robotic systems require extensive training to enable precise navigation through three-dimensional environments using multiple two-dimensional views for feedback. This project explores the possibility of using a human arm as a master device for controlling a variety of low-cost slave robots, with the aim of reducing training times whilst providing a cheaper, more intuitive control system. Virtual Reality (VR) and haptics are used as an aid for navigation of the remote environment, whilst also providing a digital twin for the operator to enable real-time feedback from the slave robot. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Remotely Teleoperating a Humanoid Robot to Perform Fine Motor Tasks with Virtual Reality - 18446

In this paper, we describe our ongoing work to develop cooperative control of NASA's R5 Valkyrie humanoid robot for performing dexterous manipulation tasks inside gloveboxes commonly found in many nuclear facilities. These tasks can be physically demanding and provide some element of risk to the operator when done by a person in situ. For example, if a glove is ruptured, the operator could be exposed to radioactive material. In many cases, the operator has low visibility and is unable to reach the entire task space, requiring the use of additional tools located inside the glovebox. Such tasks include cleaning particulate from inside the glovebox via sweeping or vacuuming, separating a specific amount of a compound to be weighed on a scale, or grasping and manipulating objects inside the glovebox. There is potential to move the operator to a nearby, safe location and instead place a humanoid robot in the potentially hazardous environment. However, teleoperating a humanoid robot to perform dexterous tasks at a comparable level to a human hand remains a difficult problem. Previous work for controlling humanoid robots often involves one or more operators using a standard 2D display with a mouse and keyboard as controllers. Successful interfaces use sensor fusion to provide information to the operator for increased situation awareness, but these designs have limitations. Gaining proper situation awareness by visualizing 3D information on a 2D screen requires time and increases the cognitive load on the user. Instead, if the operator is able to visualize and control the robot properly in three dimensions, it can increase situation and task awareness, reduce task time, reduce the chance of mistakes, and increase the likelihood of overall task success. We propose a two-part system that combines an HTC Vive virtual reality headset with either the Vive handheld controllers, or the Manus VR wearable gloves as the primary control. The operator wears the headset in a remote location and can visualize a reconstruction of the glovebox, created live by sensor scans from the robot and with sensors located inside the glovebox for a perspective traditionally unavailable to operators. By using the controllers or gloves to control the humanoid robots hands directly, they can plan actions in the virtual reconstruction. When the operator is satisfied with the plan, the actions are sent to the real robot. To test this system we have created a mockup of a glovebox that is accessible by Valkyrie, as well as several tasks that are a subsample of the tasks that might be required when working in a real glovebox. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Advanced Bent Crystal Collimation Studies at the Tevatron (T-980)

The T-980 bent crystal collimation experiment at the Tevatron has recently acquired substantial enhancements. First, two new crystals - a 16-strip one manufactured and characterized by the INFN Ferrara group and a quasi-mosaic crystal manufactured and characterized by the PNPI group. Second, a two plane telescope with 3 high-resolution pixel detectors per plane along with corresponding mechanics, electronics, control and software has been manufactured, tested and installed in the E0 crystal region. The purpose of the pixel telescope is to measure and image channeled (CH), volume-reflected (VR) and multiple volume-reflected (MVR) beam profiles produced by bent crystals. Third, an ORIGIN-based system has been developed for thorough analysis of experimental and simulation data. Results of analysis are presented for different types of crystals used from 2005 to present for channeling and volume reflection including pioneering tests of two-plane crystal collimation at the collider, all in comparison with detailed simulations.

43 PARTICLE ACCELERATORS↗

CrystalVR

SAND2022-14694 O CrystalVR is a CAD2VR plugin which enables the import of crystallographic information files (CIF) into a virtual reality (VR) environment for visualization and interaction. Crystallographic data is incredibly complex and difficult to navigate and visualize on a two-dimensional or 2D screen. CrystalVR empowers users to step inside their crystals, allowing them to intuitively grow, shrink, and scale the crystal structure. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

Krukar, John↗

Gap-filling eddy covariance methane fluxes: Comparison of machine learning model predictions and uncertainties at FLUXNET-CH4 wetlands

Time series of methane fluxes measured by eddy-covariance require gap-filling to estimate annual emissions. Gap-filling methane fluxes is challenging because of high variability and complex responses to multiple drivers. To date, there is no widely established gap-filling standard for methane, with regards both to the best model algorithms and predictors. In this study, we address the need for standardization by synthesizing results of gap-filling methods applied at 17 wetland sites spanning boreal to tropical regions including all major wetlands classes and two rice paddies. We introduce new procedures for: 1) creating realistic artificial gap scenarios, 2) training and evaluating gap-filling models without overstating performance, and 3) predicting half-hourly methane fluxes and annual emissions with robust uncertainty estimates. We tested a conventional method (marginal distribution sampling) and four machine learning algorithms - penalized linear regression, artificial neural networks, random forests, and boosted decision trees - and four predictor sets, including temporal, meteorological, ecosystem carbon and energy flux, and soil predictors. We find that the conventional method can achieve similar median performance to the machine learning models but is worse than the best machine learning models and relatively insensitive to predictor choices. Of the machine learning models, decision tree algorithms performed the best in cross-validation experiments, even with a baseline predictor set, and artificial neural networks showed comparable performance when using all predictors. Soil temperature was frequently the most important predictor whilst water table depth was important at sites with substantial water table fluctuations, highlighting the value of data on soil conditions. Raw gap-filling uncertainties from the machine learning models were underestimated and we propose a method to calibrate uncertainties to observations. Finally, we gap-fill and provide summary evaluation metrics for all 81 sites in the FLUXNET-CH4 community dataset and publicly release the python code for model development, evaluation, and uncertainty estimation.

42 ENGINEERING↗

Optimal charging profiles for mechanically constrained lithium-ion batteries

The cost and safety related issues of lithium-ion batteries require intelligent charging profiles that can efficiently utilize the battery. This paper illustrates the application of dynamic optimization in obtaining the optimal current profile for charging a lithium-ion battery using a single-particle model while incorporating intercalation-induced stress generation. In this paper, we focus on the problem of maximizing the charge stored in a given time while restricting the development of stresses inside the particle. Conventional charging profiles for lithium-ion batteries (e.g., constant current followed by constant voltage) were not derived by considering capacity fade mechanisms. These charging profiles are not only inefficient in terms of lifetime usage of the batteries but are also slower since they do not exploit the changing dynamics of the system. Dynamic optimization based approaches have been used to derive optimal charging and discharging profiles with different objective functions. The progress made in understanding the capacity fade mechanisms has paved the way for inclusion of that knowledge in deriving optimal controls. While past efforts included thermal constraints, this paper for the first time presents strategies for optimally charging batteries by guaranteeing minimal mechanical damage to the electrode particles during intercalation. In addition, an executable form of the code has been developed and provided. This code can be used to identify optimal charging profiles for any material and design parameters.

Suthar, B↗

Structural, magnetic, and electron transport properties of MnBi:Fe thin films

The structural, magnetic, and electron transport properties of Mn{sub 55-x}Fe{sub x}Bi{sub 45} (x = 0, 2, 4, 5, 8, 11, 13, 16) films prepared by multilayer deposition and annealing using e-beam evaporation have been investigated. Fe doping has produced a significant change in the magnetic properties of the samples including the decrease in saturation magnetization and magnetocrystalline anisotropy and increase in coercivity. Although the magnetization shows a smooth decrease with increasing Fe concentration, the coercivity jumps abruptly from 8.5 kOe to 22 kOe as Fe content changes from 4% to 5%, but the change in coercivity is small as the concentration goes beyond 5%. The temperature dependence of resistivity shows that the samples with low Fe concentration ({<=}4%) are metallic, but the resistivity increases unexpectedly as the concentration reaches 5%, where the resistance increases with decreasing temperature below 300 K. First-principle calculations suggest that the observed magnetic properties can be understood as the consequences of competing ferromagnetic and antiferromagnetic exchange interactions between the interstitial atom and the rest of the MnBi lattice.

36 MATERIALS SCIENCE↗

Magnetism of dilute Co(Hf) and Co(Pt) nanoclusters

An investigation of the magnetic properties of Co-rich nanoparticles alloyed with a small fraction of Pt and Hf is presented. Co(Hf) and Co(Pt) nanoparticles with less than 15 at% of dopants were produced using a cluster-deposition method. The nanoparticles have sizes of less than 10 nm and show improved magnetic properties upon doping. Maximum coercivities of 900 Oe (at 300 K) and 2000 Oe (at 10 K) were observed for Co nanoparticles alloyed with 14.1 at% of Hf. Doped nanoparticles also exhibit high anisotropies, such as K-1 = 9.98 Mergs/cm(3) (14.1 at% of Hf) and K-1 = 8.24 Mergs/cm(3) (9.5 at% of Pt), as compared to Co nanoparticles (K-1 = 6.21 Mergs/cm(3)). (C) 2012 American Institute of Physics. [doi:10.1063/1.3678582]

Balamurugan, B↗

Assembly of uniaxially aligned rare-earth-free nanomagnets

We report HfCo7 nanoparticles with appreciable permanent-magnet properties (magnetocrystalline anisotropy K-1 approximate to 10 Mergs/cm(3), coercivity H-c approximate to 4.4 kOe, and magnetic polarization J(s) approximate to 10.9 kG at 300 K) deposited by a single-step cluster-deposition method. The direct crystalline-ordering of nanoparticles during the gas-aggregation process, without the requirement of a high-temperature thermal annealing, provides an unique opportunity to align their easy axes uniaxially by applying a magnetic field of about 5 kOe prior to deposition, and subsequently to fabricate exchange-coupled nanocomposites having J(s) as high as 16.6 kG by co-depositing soft magnetic Fe-Co. This study suggests HfCo7 as a promising rare-earth-free permanent-magnet alloy, which is important for mitigating the critical-materials aspects of rare-earth elements. (C) 2012 American Institute of Physics. [http://dx.doi.org/10.1063/1.4753950]

Balamurugan, B↗

Structural and magnetic properties of Pr-alloyed MnBi nanostructures

The structural and magnetic properties of Pr-alloyed MnBi (short MnBi-Pr) nanostructures with a range of Pr concentrations are investigated. The nanostructures include thin films having Pr concentrations 0, 2, 3, 5 and 9 at.% and melt-spun ribbons having Pr concentrations 0%, 2%, 4% and 6%, respectively. Addition of Pr into the MnBi lattice has produced a significant change in the magnetic properties of these nanostructures including an increase in coercivity and structural phase transition temperature, and a decrease in saturation magnetization and anisotropy energy. The highest value of coercivity measured in the films is 23 kOe and in the ribbons is 5.6 kOe. The observed magnetic properties are explained as the consequences of competing ferromagnetic and antiferromagnetic interactions.

Kharel, P↗

HfCo7-Based Rare-Earth-Free Permanent-Magnet Alloys

This study presents the structural and magnetic properties of melt-spun HfCo7, HfCo7-xFex (0.25 <= x <=), and HfCo7Six (0.2 <= x <= 1.2) alloys. Appreciable permanent-magnet properties with a magnetocrystalline anisotropy of about 9.6-16.5, Mergs/cm(3), a magnetic polarization J(s) approximate to 7.2-10.6 kG, and coercivities H-c = 0.5-3.0 kOe were obtained by varying the composition of these alloys. Structural analysis reveals that the positions of x-ray diffraction peaks of HfCo7 show good agreement with those corresponding to an orthorhombic structure having lattice parameters of about a = 4.719 angstrom, b = 4.278 angstrom, and c = 8.070 angstrom. Based on these results, a model crystal structure for HfCo7 is developed and used to estimate the magnetic properties of HfCo7 using density-functional calculations, which agree with the experimental results.

Das, B↗

Magnetic and Structural Properties of Rapidly Quenched Tetragonal Mn3-xGa Nanostructures

Nanostructured Mn3-x Ga ribbons with x = 0, 0.4, 0.9 and 1.1 were prepared using arc-melting, melt-spinning and annealing. As-spun samples crystallized into hexagonal D0(19) and cubic L2(1) Heusler crystal structures based on the concentration of Mn in Mn3-xGa. Upon vacuum-annealing the samples at 450 degrees C for about 50 hours, both the hexagonal and cubic structures transformed into a tetragonal D0(22) structure. High-temperature x-ray diffraction and high-temperature magnetometry showed that the samples with low Mn content (Mn-1.9 Ga and Mn-2.1 Ga) retain their tetragonal structure up to 850 K but the samples with high Mn concentrations (Mn-2.6 Ga and Mn-3.0 Ga) undergo a structural phase transition from tetragonal to hexagonal phases around 800 K. The magnetic properties of Mn3-x Ga ribbons were very sensitive to Mn concentration, where the magnetization and anisotropy energy increased and the coercivity decreased as x increased from 0 to 1.1. Although the Curie temperatures of Mn-2.6 Ga and Mn-3.0 Ga samples could not be determined because of the structural phase transition, the Curie temperature decreased with increasing x in Mn3-x Ga. The maximum magnetization of 57 emu/g (300 emu/cm(3)) and the coercivity of 6.5 kOe were measured in the Mn-1.9 Ga and Mn-3.0 Ga ribbons, respectively.

Huh, Y↗

Magnetism of MnBi-Based Nanomaterials

Nanostructured MnBi ribbons doped with impurity elements including B, C, Fe, Hf, Sm and Tb were prepared using the arc melting and melt-spinning techniques. The melt-spun ribbons were annealed in vacuum furnace at 350 degrees C to obtain the intended hexagonal structure. The external impurity doping made a significant change in the magnetic properties of the nanostructured MnBi ribbons including a decrease in saturation magnetization (M-s) and anisotropy energy (K) and an increase in coercivity H-c. However, Hf and C co-doping showed the opposite effect with a small increase in both M-s and K. Interestingly, the anisotropy energy of the boron doped sample increased by about 15% irrespective of the small decrease in magnetization. A significant increase in H-c of MnBi ribbons was found due to Hf, Tb and Sm doping. H-c as high as 13 kOe was achieved in Hf-doped sample after the sample was aligned in a magnetic field. A thermal hysteresis was observed at the structural phase transition of MnBi, which shifts by about 5 K towards higher temperatures due to impurity doping. The observed magnetic properties of the impurity doped MnBi ribbons are explained as the consequences of the disorder and the competing ferromagnetic and antiferromagnetic interactions.

Kharel, P↗

Lithium Intercalation in Core-Shell Materials-Theoretical Analysis

Core-shell composite structures are potential candidates for Li-ion battery electrodes as they can take advantage of materials with higher energy density and materials with higher cyclability. This paper derives an analytical solution for isotropic 1-dimensional diffusion with galvanostatic boundary condition in composite slab, cylinder and sphere using separation of variables method. A general interfacial condition has been used to represent the dynamics at the interface of the composite material rendering the solution useful for wide variety of battery materials. Using the derived analytical solution for diffusion, intercalation induced stresses were estimated for spherical core-shell materials. (C) 2014 The Electrochemical Society. All rights reserved.

Suthar, B↗

Efficient Conservative Reformulation Schemes for Lithium Intercalation

Porous electrode theory coupled with transport and reaction mechanisms is a widely used technique to model Li-ion batteries employing an appropriate discretization or approximation for solid phase diffusion with electrode particles. One of the major difficulties in simulating Li-ion battery models is the need to account for solid phase diffusion in a second radial dimension r, which increases the computation time/cost to a great extent. Various methods that reduce the computational cost have been introduced to treat this phenomenon, but most of them do not guarantee mass conservation. The aim of this paper is to introduce an inherently mass conserving yet computationally efficient method for solid phase diffusion based on Lobatto III A quadrature. This paper also presents coupling of the new solid phase reformulation scheme with a macro-homogeneous porous electrode theory based pseudo 20 model for Li-ion battery. (C) The Author(s) 2015. Published by ECS. All rights reserved.

Urisanga, PC↗

Optimal Charging Profiles with Minimal Intercalation-Induced Stresses for Lithium-Ion Batteries Using Reformulated Pseudo 2-Dimensional Models

This paper illustrates the application of dynamic optimization in obtaining the optimal current profile for charging a lithium-ion battery by restricting the intercalation-induced stresses to a pre-determined limit estimated using a pseudo 2-dimensional (P2D). model. This paper focuses on the problem of maximizing the charge stored in a given time while restricting capacity fade due to intercalation-induced stresses. Conventional charging profiles for lithium-ion batteries (e.g., constant current followed by constant voltage or CC-CV) are not derived by considering capacity fade mechanisms, which are not only inefficient in terms of life-time usage of the batteries but are also slower by not taking into account the changing dynamics of the system. (C) The Author(s) 2014. Published by ECS. This is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial No Derivatives 4.0 License (CC BY-NC-ND, http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial reuse, distribution, and reproduction in any medium, provided the original work is not changed in any way and is properly cited. For permission for commercial reuse, please email: oa@electrochem.org. All rights reserved.

Suthar, B↗