Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Tunable material properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Orientation-tunable local crystallization of Si films enabled by atomic imprint crystallization

Here, in this paper, we demonstrate area-selective crystallization of amorphous Si into tunable crystal orientations enabled by atomic imprint crystallization (AIC), where an amorphous Si layer is crystallized by solid phase epitaxy (SPE) from an externally impressed single-crystalline Si template. Using micro-patterned single-crystalline Si templates, a limited area of an amorphous Si film, where the film surface and patterned template surface are in contact, is crystallized via SPE to create an array of crystallographically aligned dots embedded in amorphous matrix. Combining AIC from the top surface and conventional SPE from the substrate, we demonstrate the fabrication of an array of crystalline dots embedded in single-crystalline matrix with tunable in-plane rotation angle. The results indicate the high tunability of the crystallization process enabled by AIC, allowing precise control of crystallographic properties of thin films with area-selectivity; such capability opens opportunities for the design of new materials for a wide range of applications in materials science.

Amorphous↗
DOE OSTI2024

Anode Upcycling via Tailored Solvent Treatment

To achieve a truly closed-loop direct recycling process for lithium-ion batteries, all component materials must be recovered. To date, direct recycling method development has primarily focused on the high-value transition-metal cathode materials, while the inherently lower-value graphite has been challenging to recover in a cost-effective manner. However, end-of-life graphite contains a unique engineered value due to the presence of the solid electrolyte interphase (SEI). Growth of the SEI during the cell's active lifetime stabilizes the electronically reactive graphite surface through an irreversible consumption of Li, and thus necessitates both excess lithiation of the cathode and a costly and time-intensive formation procedure during manufacturing. An optimized pre-formed SEI that capitalizes on existing SEI components from end-of-life batteries has the potential to significantly reduce cathode lithiation requirements and eliminate the critical bottleneck of formation cycling during cell remanufacturing. Further, retaining Li at the anode obviates the need for a separate Li leaching and recovery step, improving the overall efficiency of the direct recycling line. In this work, we present a novel approach to "upcycling" spent graphite through use of tailored chemical treatment to remove adverse (i.e., highly resistive and/or poorly passivating) SEI species while retaining beneficially passivating components. We have explored a rational set of solvents spanning a range of polarity, proticity, and molecular size to evaluate structure-property-performance relationships between applied solvent(s), removed and remaining SEI species, and electrochemical response of the resulting graphite product. Further, we have developed and optimized a robust and holistic analysis procedure that couples symmetric-cell electrochemical testing, multi-modal materials characterization, and advanced electrochemical modeling. These analysis results inform a set of correlative metrics for graphite performance relative to both solvent properties and upcycled SEI composition. We demonstrate effective tunability in the residual SEI composition by varying solvent identity and concentration, and report on several promising solvent systems that achieve comparable or performance to pristine graphite.

anode recycling↗
DOE OSTI2022

Density Functional Theory Study of Controllable Optical Absorptions and Magneto-Optical Properties of Magnetic CrI 3 Nanoribbons: Implications for Compact 2D Magnetic Devices

A chromium triiodide (CrI 3 ) monolayer has an interesting ferromagnetic ground-state. In this work, we calculate band structures and magnetic moments of tensile-strained and bent zigzag CrI 3 nanoribbons with density functional theory. The edge iodine atoms form flat low-lying conduction bands and couple with chromium atoms ferromagnetically, while the non-edge iodine atoms weakly couple antiferromagnetically. Narrow CrI 3 nanoribbons have two locally stable magnetic moment orientations, namely out-of-plane and in-plane (along the nanoribbon periodic direction) configurations. This enables four magnetization states in CrI 3 nanoribbons, including two out-of-plane ones (up and down) and two in-plane ones (forward and backward along the nanoribbon periodical direction), increasing the operating controllability. Based on the one-dimensional Ising spin chain model, the spin correlation length of the narrow CrI 3 nanoribbon is estimated as about 10 Å at its estimated Curie temperature of 27 Kelvin, which is lower than the measured 45 Kelvin of the monolayer CrI 3 . The optical absorption and magneto-optical properties of CrI 3 nanoribbons are investigated with many-body perturbation GW-BSE (Bethe-Salpeter equation), including magnetic dichroism, Faraday and magneto-optical Kerr effects. Here, the low-energy dark excitons are mainly from transitions between electrons and holes with unlike spins and are non-Frenkel-like, while the bright excitons have mixed spin configurations. The intrinsic lifetime of excitons can be over one nanosecond, suitable for quantum information processes. Tensile strains and bending manifestly modulate the absorption spectra and magneto-optical properties of CrI 3 nanoribbons within a technologically important photon energy-range of ~1.0-2.0 eV. The CrI 3 nanoribbons can be used in 1D or 2D magnetic storage nanodevices, tunable magnetic optoelectronics, and spin-based quantum information controls.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Strong Purcell enhancement at telecom wavelengths afforded by spinel Fe 3 O 4 nanocrystals with size-tunable plasmonic properties

Developments in the field of nanoplasmonics have the potential to advance applications from information processing and telecommunications to light-based sensing. Traditionally, nanoscale noble metals such as gold and silver have been used to achieve the targeted enhancements in light-matter interactions that result from the presence of localized surface plasmons (LSPs). However, interest has recently shifted to intrinsically doped semiconductor nanocrystals (NCs) for their ability to display LSP resonances (LSPRs) over a much broader spectral range, including the infrared (IR). Among semiconducting plasmonic NCs, spinel metal oxides (sp-MOs) are an emerging class of materials with distinct advantages in accessing the telecommunications bands in the IR and affording useful environmental stability. In this work, we report the plasmonic properties of Fe 3 O 4 sp-MO NCs, known previously only for their magnetic functionality, and demonstrate their ability to modify the light-emission properties of telecom-emitting quantum dots (QDs). We establish the synthetic conditions for tuning sp-MO NC size, composition and doping characteristics, resulting in unprecedented tunability of electronic behavior and plasmonic response over 450 nm. In particular, with diameter-dependent variations in free-electron concentration across the Fe 3 O 4 NC series, we introduce a strong NC size dependency onto the optical response. In addition, our observation of plasmonics-enhanced decay rates from telecom-emitting QDs reveals Purcell enhancement factors for simple plasmonic-spacer-emitter sandwich structures up to 51-fold, which are comparable to values achieved previously only for emitters in the visible range coupled with conventional noble metal NCs.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Influence of Polymer and Support Interactions on the Electrocatalytic Properties of Heterogenized Molecular Complexes

Heterogenized molecular catalysts have been the subject of increasing interest in the context of electrochemical small molecule activation due to the possibility of active site homogeneity and tunability, which can surpass many nanostructured materials. When molecular catalysts strongly interact with carbon supports through π–π interactions, they tend to show higher selectivity and activity during heterogeneous electrochemical reactions. Indeed, ligand modifications in the secondary sphere that allow for more π–π overlap between catalyst and carbon support often show improved performance. Interactions between catalyst and polymer binder are also a possible modulus of control in these reactions, either through coordinating moieties that interact with active sites or through control over substrate or product transport. Finally, the covalent linking of molecular complexes onto carbon materials has also been shown to result in high activity and stability. Recent advances in the use of carbon supports, both through covalent and non-covalent interactions, and polymers to alter small molecule activation by heterogenized molecular catalysts are summarized in this Perspective.

Johnson, Elizabeth K. [University of Virginia, Cha↗
DOE OSTI2021

Colloidal quantum dot lasers

We report semiconductor nanocrystals represent a promising class of solution-processable optical-gain media that can be manipulated via inexpensive, easily scalable colloidal techniques. Due to their extremely small sizes (typically <10 nm), their properties can be directly controlled via effects of quantum confinement; therefore, they are often termed colloidal quantum dots (CQDs). In addition to size-tunable emission wavelengths, CQDs offer other benefits for lasing applications, including low optical-gain thresholds and high temperature stability of lasing characteristics. Recent progress in understanding and practical control of processes impeding light amplification in CQDs has resulted in several breakthroughs, including the demonstration of optically pumped continuous-wave lasing, the realization of optical gain with direct current electrical injection and the development of dual-function electroluminescent devices that also operate as optically pumped lasers. The purpose of this Review is to assess the status of the field of CQD lasing and discuss the existing challenges and opportunities. A particular focus is on approaches for suppressing nonradiative Auger recombination, novel optical-gain concepts enabled by strong exciton-exciton interactions and controlled CQD charging, effects of nanocrystal form factors on light amplification and practical architectures for realizing electrically pumped CQD lasers. This overview suggests that the accumulated knowledge, along with the approaches developed for manipulating the optical-gain properties of colloidal nanostructures, perfectly position the CQD field for successfully addressing a long-standing challenge: the realization of CQD-based laser diodes. Colloidal quantum dots are promising materials for realizing versatile, wavelength-tunable, solution-processed lasers. This Review surveys recent advances in colloidal quantum dot lasing, provides an in-depth analysis of outstanding challenges and discusses a path forward to implementing technologically viable lasing devices.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Near-Field Nanoimaging of Colloidal Transition Metal Dichalcogenide Waveguides

Bulk transition metal dichalcogenide (TMDC) nanostructures are regarded as promising material candidates for integrated photonics due to their high refractive index at the near-infrared wavelengths. Here in this work, colloidal TMDC waveguides with tailorable dimensions are prepared by a scalable synthetic approach. The optical waveguiding properties of colloidal nanowires are studied by the near-field nanoimaging technique. In addition to dependence on thickness and wavelength, the excitonic responses and resultant waveguide modes in TMDC nanowires can be modulated by the environmental temperature. With the high-throughput production and tunable optical properties, colloidal TMDC nanowires highlight the potential for active optical components and integrated photonic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Probing and Tuning Strain‐Localized Exciton Emission in 2D Material Bubbles at Room Temperature

In monolayer transition metal dichalcogenides bubbles-nanoscale deformations typically exhibiting a dome-like shape-Excitons are confined by the strain effect, which exhibits extraordinary emission properties, such as single photon generation, enhanced light emission, and spectrally tunable excitonic states. While the strain profiles of these bubbles are extensively studied, this work provides an approach 1) to directly visualize the associated exciton properties in bubbles formed in WSe2 monolayer, revealing an intrinsic emission wavelength shift of ≈40 nm, and 2) actively modify local strain, enabling further exciton emission tuning over a range of 50 nm. These are achieved by emission mapping and nanoindentation using a dielectric near-field probe, which enables the detection of local emission spectra and emission lifetimes within individual bubbles. Statistical analysis of 67 bubbles uncovers an emission wavelength distribution centered around 780 nm. Furthermore, saturation behavior in the power-dependent studies and the associated lifetime change reveal the localized nature of the strain-induced states. These findings provide direct insights into the strain-localized emission dynamics in bubbles and establish a robust framework for non-destructive, reversible, and predictable nanoscale emission control, presenting a potential avenue for developing next-generation tunable quantum optical sources.

2D materials bubbles↗
DOE OSTI2024

Carbon capture in polymer-based electrolytes

Nanoparticle organic hybrid materials (NOHMs) have been proposed as excellent electrolytes for combined CO 2 capture and electrochemical conversion due to their conductive nature and chemical tunability. However, CO 2 capture behavior and transport properties of these electrolytes after CO 2 capture have not yet been studied. Here, we use a variety of nuclear magnetic resonance (NMR) techniques to explore the carbon speciation and transport properties of branched polyethylenimine (PEI) and PEI-grafted silica nanoparticles (denoted as NOHM-I-PEI) after CO 2 capture. Quantitative 13 C NMR spectra collected at variable temperatures reveal that absorbed CO 2 exists as carbamates (RHNCOO – or RR'NCOO – ) and carbonate/bicarbonate (CO 3 2– /HCO 3 – ). The transport properties of PEI and NOHM-I-PEI studied using 1 H pulsed-field-gradient NMR, combined with molecular dynamics simulations, demonstrate that coulombic interactions between negatively and positively charged chains dominate in PEI, while the self-diffusion in NOHM-I-PEI is dominated by silica nanoparticles. These results provide strategies for selecting adsorbed forms of carbon for electrochemical reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Observation of Electrically Tunable van Hove Singularities in Twisted Bilayer Graphene from NanoARPES

The possibility of triggering correlated phenomena by placing a singularity of the density of states near the Fermi energy remains an intriguing avenue toward engineering the properties of quantum materials. Twisted bilayer graphene is a key material in this regard because the superlattice produced by the rotated graphene layers introduces a van Hove singularity and flat bands near the Fermi energy that cause the emergence of numerous correlated phases, including superconductivity. Direct demonstration of electrostatic control of the superlattice bands over a wide energy range has, so far, been critically missing. This work examines the effect of electrical doping on the electronic band structure of twisted bilayer graphene using a back-gated device architecture for angle-resolved photoemission measurements with a nano-focused light spot. A twist angle of 12.2° is selected such that the superlattice Brillouin zone is sufficiently large to enable identification of van Hove singularities and flat band segments in momentum space. Finally, the doping dependence of these features is extracted over an energy range of 0.4 eV, expanding the combinations of twist angle and doping where they can be placed at the Fermi energy and thereby induce new correlated electronic phases in twisted bilayer graphene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Reflectin: Protein Driver of Dynamically Tunable Biophotonics; New Paradigm for Tunably Reconfigurable Materials

We discovered that the reflectins, with architecture and sequences unlike those of any other proteins known, exhibit a novel interplay between signal-controlled nucleation and growth of dynamically arrested liquid-liquid phase-segregated assemblies that uniquely enables the continuous and precise fine-tuning of physical properties governing the color and brightness of light reflected from the membrane-enclosed nanostructures that contain them. Our research included high-resolution structural analyses conducted at the DOE-BES user facilities of the Stanford Synchrotron Light Source and LBL National Laboratory’s Molecular Foundry, leveraging their capabilities for time-resolved SAXS and cryo-TEM with our ongoing genetic engineering, biophysical and computational analyses to identify the structural determinants and mechanisms governing the dynamic behaviors of the reflectins. We augmented these methods with EPR analyses that revealed for the first time the existence of a specific pathway of reflectin assembly. Using dynamic light scattering and continuously monitored circular dichroism and Raman microscopy, we elucidated the progression of structural changes underlying the mechanisms of signal-induced condensation, folding, assembly, liquefaction, dynamic arrest, regulation and reversal.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRSDate not supplied

Characterization of Novel Spacecraft Materials aboard the Materials International Space Station Experiment-Flight Facility (Preliminary Results)

This work will encompass the preflight characterization of 15 novel and heritage materials currently under observation on the Materials International Space Station Experiment-Flight Facility (MISSE-FF). MISSE-FF has been upgraded to perform active reflectance measurements of the materials. Images taken in RGB/IR colors are compared to results from an extensive ground testing campaign to obtain quantitative on-orbit material evolution data. Identical materials samples are to be flown on the ram, wake, and zenith faces of MISSE-FF, enabling deconvolution of the energetic electron, proton, atomic oxygen, and ultraviolet damage pathways. Energy deposition from the space environment leads to chemical changes in the material that in turn alter the optical properties. The same chemical damage that manifests as changes in optical reflectance and absorptance also leads to changes in myriad physical properties such as mechanical strength, electrical conductivity, and chemical reactivity. Therefore, flight materials are able to be characterized based on their unique reflectance spectra by comparing on-orbit measurements of optical reflectance with extensive terrestrial experiments, which help to correlate changes in reflectance with respect to changes in other material properties. The MISSE program has been a part of the International Space Station National Laboratory for many years and has been instrumental in understanding space weather modification of material properties. However, MISSE-FF has been limited to passive experiments with only pre/post flight material studies possible. In advance of the MISSE-16 experiment, the flight facility has received a major upgrade to provide daily spectral observations by way of a RGB/IR camera and a tunable light source. The MISSE-16 mission launched in February 2022 and carries 15 material samples for 6 months of the low Earth orbital exposure. Identical materials samples are to be flown on the ram, wake, and zenith faces of MISSE-FF, enabling deconvolution of the energetic electron, proton, atomic oxygen, and ultraviolet damage pathways. This paper discusses the MISSE-16 experiment, highlights the first use of the facility upgrades, and presents results from the extensive preflight material characterization that includes directional hemispherical reflectance, bidirectional reflectance, AFM, SEM, and electrical conductivity. Additionally, data showing the modification of these properties by ground-based exposure to space-like electron and atomic oxygen flux will be discussed. Finally, updates on deployment and initial check-out of the experiment on MISSE-FF will be presented. It is the ultimate goal of this program to provide validation for the development of ground based space weather simulation facilities and techniques.

Ryan Hoffman↗
DOE OSTI2021

Optimized structure and electronic band gap of monolayer GeSe from quantum Monte Carlo methods

Here, we have used highly accurate quantum Monte Carlo methods to determine the chemical structure and electronic band gaps of monolayer GeSe. Two-dimensional (2D) monolayer GeSe has received a great deal of attention due to its unique thermoelectric, electronic, and optoelectronic properties with a wide range of potential applications. Density functional theory (DFT) methods have usually been applied to obtain optical and structural properties of bulk and 2D GeSe. For the monolayer, DFT typically yields a larger band-gap energy than for bulk GeSe but cannot conclusively determine if the monolayer has a direct or indirect gap. Moreover, the DFT-optimized lattice parameters and atomic coordinates for monolayer GeSe depend strongly on the choice of approximation for the exchange-correlation functional, which makes the ideal structure-and its electronic properties-unclear. In order to obtain accurate lattice parameters and atomic coordinates for the monolayer, we use a surrogate Hessian-based parallel line search within diffusion Monte Carlo to fully optimize the GeSe monolayer structure. The DMC-optimized structure is different from those obtained using DFT, as are calculated band gaps. The potential energy surface has a shallow minimum at the optimal structure. This, combined with the sensitivity of the electronic structure to strain, suggests that the optical properties of monolayer GeSe are highly tunable by strain.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Development of Antimicrobial PLA Composites for Fused Filament Fabrication

In addition to possessing the desirable properties of being a biodegradable and biocompatible polymer fabricated from renewable resources, poly (lactic acid) (PLA) has useful mechanical and thermal attributes that has enabled it to be one of the most widely-used plastics for medicine, manufacturing, and agriculture. Yet, PLA composites have not been heavily explored for use in 3D-printing applications, and the range of feasible materials for the technology is limited, which inhibits its potential growth and industry adoption. In this study, tunable, multifunctional antimicrobial PLA composite filaments for 3D-printing have been fabricated and tested via chemical, thermal, mechanical, and antimicrobial experiments. Thermally stable antimicrobial ceramics, ZnO and TiO2, were used as fillers up to 30 wt%, and poly (ethylene glycol) (PEG) was used as a plasticizer to tune the physical material properties. Results demonstrate that the PLA composite filaments exhibit the thermal phase behaviors and thermal stability suitable for 3D-printing. Additionally, PEG can be used to tune the mechanical properties while not affecting the antimicrobial efficacy that ZnO and TiO2 imbue.

TiO2↗
DOE OSTI2023

Endowing Polythioester Vitrimer with Intrinsic Crystallinity and Chemical Recyclability

Abstract Technologically important thermosets face a long‐standing end‐of‐life (EoL) problem of non‐reprocessability, a more sustainable solution of which has resolved to nascent vitrimers that can merge the robust material properties of thermosets and the reprocessability of thermoplastics. However, the lifecycle of vitrimers is still finite, as they often suffer from significant deterioration of mechanical performance following multiple reprocessing cycles, analogous to mechanical recycling, and they often show undesired creep under working conditions. To address these two key limitations, we have developed a cross‐linked semi‐crystalline polythioester with both dynamic covalent bonds and intrinsic crystallinity and chemical recyclability, affording a vitrimeric system that exhibits not only reprocessability and crystallinity‐restricted creep but also complete chemical recyclability to initial monomer by catalyzed depolymerization in solution or bulk. Therefore, reported herein is an “infinite” vitrimer system that is empowered with a facile closed‐loop EoL option once serial reprocessing deteriorates performance and the material can no longer meet the application requirements. Specifically, the polythioester vitrimer was constructed by copolymerization of a bicyclic thioester with a bis‐dithiolane, producing dynamically cross‐linked polythioesters with excellent property tunability, from amorphous to semi‐crystalline states and melting transition temperatures from 91 to 178 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Robust and Highly Conductive Water-Stable Copper Iodide-Based Hybrid Single Crystals

High conductivity, carrier mobility as well as long diffusion length are critical for highly efficient solar cells. Here, we report new types of crystalline inorganic-organic hybrid semiconductors, 2D-Cu 2 I 2 (L) [L = benzo[c][1,2,5]thiadiazole (bs) and benzo[c][1,2,5] selenadiazole (bse)], composed of one-dimensional (1D) copper iodide staircase-like chain and benzodiazole-based ligands. These compounds possess narrow and tunable band gaps and high conductivity. High-quality large single crystals of 2D-Cu 2 I 2 (bse) were grown and used to evaluate the charge transport properties of the material. State-of-the-art time-resolved microwave conductivity (TRMC) techniques were used to investigate the charge carrier dynamics, from which a high conductivity of 2 × 10 -4 S/cm, a carrier mobility of ~1 cm 2 V -1 s -1 , a maximum doping/carrier density of 2 +/- 1 × 10 15 cm -3 , and a diffusion length of ~0.17 um were obtained. We report the excellent water/chemical stability combined with high conductivity makes this I-VII-based hybrid material family promising candidates for potential optoelectronic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Role of Transition Metals in Metal–Organic Frameworks as Nanoporous Ion Emitters for Thermal Ionization Mass Spectrometry

Thermal ionization mass spectroscopy (TIMS) is a powerful analytical technique that allows for precise determination of isotopic ratios. Analysis on low abundance samples, however, can be limited by the ionization efficiency. Following an investigation into a new type of metal-organic hybrid material devised to promote the emission of analyte ions (nano-PIES) and reduce traditional sample loading problems, this work probes the impact that changing the metal in the material has on the ionization of Uranium-238. Being derived from metal-organic frameworks (MOFs), nano-PIEs inherit the tunability of the parent MOFs; the MOF-74 series has been well studied for probing the impact various framework metals (i.e., Mg, Mn, Co, Ni, Cu, Zn, and Cd) have on material properties, and thus, a series of nano-PIEs with different metals were derived from an isoreticular MOF-74 series. In conclusion, trends in ionization efficiency were studied as a function of ionization potential, volatility, and work function of the framework metals as well as the mechanism of ionization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Compressive Response and Energy Absorption of Additively Manufactured Elastomers with Varied Simple Cubic Architectures

Additive manufacturing, and particularly the vat photopolymerization process, enables the fabrication of complex geometries at high resolution and small length scales, making it well-suited for fabricating cellular structures (e.g., foams and lattices). Among these, elastomeric cellular structures are of growing interest due to their tunable compliance and energy dissipation. However, comprehensive data on the compressive behavior of these structures remains limited, especially for investigating the structure-property effects from changing the density and distribution of material within the cellular structure. This study explores how the mechanical response of polyurethane-based simple cubic structures changes when varying volume fraction, unit cell length, and unit cell patterning, which have not been systematically investigated previously in additively manufactured elastomers. Increasing volume fraction from 10% to 50% yielded significant changes in compressive stress–strain performance (decreasing strain at 0.5 MPa by 41.6% and increasing energy absorption density by 3962.5%). Although changing the unit cell length between 2.5 and 7 mm in ~30 mm parts did not result in statistically different stress–strain responses, modifying the configuration of struts of different thicknesses across designs with 30% volume fraction altered the stress–strain behavior (differences of 12.5% in strain at 0.5 MPa and 109.4% for energy absorption density). Power law relationships were developed to understand the interactions between volume fraction, unit cell length, and elastic modulus, and experimental data showed strong fits (R 2 > 0.91). These findings enhance the understanding of how multiple structural design aspects influence the performance of elastomeric cellular materials, providing a foundation for informing strategic design of tailorable materials for diverse mechanical applications.

36 MATERIALS SCIENCE↗