Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2014

Evolution of structural and magnetic properties due to nanocrystallization of mechanically milled amorphous Pr-Co-B powders

Pr{sub 2}Co{sub 14}B permanent magnet powders were prepared by mechanical milling of an arc-melted ingot. X-ray diffraction analysis revealed the presence of the 2:14:1 phase after 1 h of milling which transformed into an amorphous phase with additional milling time. Increasing the milling time also lowered the intrinsic coercivity while the saturation magnetization increased up to 105 emu/g. Differential scanning calorimetry measurements revealed a crystallization temperature of around 560 °C. Upon annealing 30 h of as-milled amorphous powders between 500 and 900 °C, we observed the precipitation of the 2:14:1 phase. The optimum post-milling annealing temperature was 600 °C with an intrinsic coercivity of 7 kOe and maximum energy product of 6 MGOe.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Binary pseudo-random patterned structures for modulation transfer function calibration and resolution characterization of a full-field transmission soft x-ray microscope

We present a modulation transfer function (MTF) calibration method based on binary pseudo-random (BPR) one-dimensional sequences and two-dimensional arrays as an effective method for spectral characterization in the spatial frequency domain of a broad variety of metrology instrumentation, including interferometric microscopes, scatterometers, phase shifting Fizeau interferometers, scanning and transmission electron microscopes, and at this time, x-ray microscopes. The inherent power spectral density of BPR gratings and arrays, which has a deterministic white-noise-like character, allows a direct determination of the MTF with a uniform sensitivity over the entire spatial frequency range and field of view of an instrument. We demonstrate the MTF calibration and resolution characterization over the full field of a transmission soft x-ray microscope using a BPR multilayer (ML) test sample with 2.8 nm fundamental layer thickness. We show that beyond providing a direct measurement of the microscope’s MTF, tests with the BPRML sample can be used to fine tune the instrument’s focal distance. Our results confirm the universality of the method that makes it applicable to a large variety of metrology instrumentation with spatial wavelength bandwidths from a few nanometers to hundreds of millimeters.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2018

Structure Sensitivity of Acrolein Hydrogenation by Platinum Nanoparticles on Ba x Sr 1- x TiO 3 Nanocuboids

The structure sensitivity of Pt nanoparticles (Pt N ) for gas-phase acrolein (AC) hydrogenation was probed for Pt N on Ba x Sr 1- x TiO 3 nanocuboid supports with (0 0 1) facets in a combined theoretical and experimental study. The in situ selectivity for allyl alcohol increased with the increase of the Sr concentration in the support, which corresponds to modifications in the stable Winterbottom shape and lattice strain of the Pt nanoparticles as a result of the interfacial energy between Pt and the Ba x Sr 1- x TiO 3 supports. “Local model” nanofacets of the Pt surface, edge, and corner morphologies were developed as compact representations of adsorption and reaction sites. DFT was used as the primary modeling tool for the equilibrium adsorption states. We argue that adsorption on edge sites is critically important for the overall allyl alcohol selectivity of Pt N catalysts. A simple model was developed to represent Pt N strain effects caused by its interaction with the substrate. Bader topological atom, spherical volume averaging charge, and modified bond valence sum analyses were used to understand the bonding structure. Density of states analysis was performed for the structures of Pt N , adsorbed AC, and intermediate products to examine adsorbate–particle interactions. The simulated hydrogenation of AC on Pt N nanofacets was compared to the in situ hydrogenation of AC by Pt N on Ba x Sr 1- x TiO 3 to examine the effects of facet, edge, and corner sites on the overall selectivity.

bio-inspired↗
DOE OSTI2016

Ionic and Optical Properties of Methylammonium Lead Iodide Perovskite across the Tetragonal–Cubic Structural Phase Transition

Abstract Practical hybrid perovskite solar cells (PSCs) must endure temperatures above the tetragonal–cubic structural phase transition of methylammonium lead iodide (MAPbI 3 ). However, the ionic and optical properties of MAPbI 3 in such a temperature range, and particularly, dramatic changes in these properties resulting from a structural phase transition, are not well studied. Herein, we report a striking contrast at approximately 45 °C in the ionic/electrical properties of MAPbI 3 owing to a change of the ion activation energy from 0.7 to 0.5 eV, whereas the optical properties exhibit no particular transition except for the steady increase of the bandgap with temperature. These observations can be explained by the “continuous” nature of perovskite phase transition. We speculate that the critical temperature at which the ionic/electrical properties change, although related to crystal symmetry variation, is not necessarily the same temperature as when tetragonal–cubic structural phase transition occurs.

Hoque, Md Nadim Ferdous↗
DOE OSTI2020

Synthesis, Structural Characterization and Chemical Bonding of Sr 7 Li 6 Sn 12 and its Quaternary Derivatives with Eu and Alkaline Earth Metal (Mg, Ca, Ba) Substitutions. A Tale of Seven Li‐Containing Stannides and Two Complex Crystal Structures

In this paper, we discuss the synthesis and the structural characterization of the new ternary compound Sr 7 Li 6 Sn 12 and its six quaternary derivatives, where alkaline earth metals (Ca, Mg, Ba) and the rare earth metal Eu are substituted, yielding crystalline phases of monoclinic or orthorhombic symmetry. The title compounds were synthesized via high‐temperature solid‐state reactions of the corresponding elements. The crystal structures were determined by single‐crystal X‐ray diffraction methods. The (Sr,Ca) 7 Li 6 Sn 12 and Eu 7 (Mg,Li) 6 Sn 12 phases represent a new structure type (space group P 2/ m , No. 10) while Sr 7 Li 6 Sn 12 and the rest of the title phases crystallize in the orthorhombic base‐centered space group Cmmm (No. 65) which is similar to the Eu 7 Li 8– x Sn 10+ x ( x ≈ 2.0) phase with the Ce 7 Li 8 Ge 10 structure type (Pearson code oC 50). Careful examination of the resulting structures shows intricate disordering between Li and Sn atoms, which is governed by the total number of valence electrons. The discussion of experimental results is also supported by DFT electronic structure calculations.

Osman, Hussien H.↗
DOE OSTI2018

The limiting layer of fish scales: structure and properties

Fish scales serve as a flexible natural armor that have received increasing attention across the materials community. Most efforts in this area have focused on the composite structure of the predominately organic elasmodine, and limited work addresses the highly mineralized external portion known as the Limiting Layer (LL). This coating serves as the first barrier to external threats and plays an important role in resisting puncture. In this investigation the structure, composition and mechanical behavior of the LL were explored for three different fish, including the arapaima (Arapaima gigas), the tarpon (Megalops atlanticus) and the carp (Cyprinus carpio). The scales of these three fish have received the most attention within the materials community. Features of the LL were evaluated with respect to anatomical position to distinguish site-specific functional differences. Results show that there are significant differences in the surface morphology of the LL from posterior and anterior regions in the scales, and between the three fish species. The calcium to phosphorus ratio and the mineral to collagen ratios of the LL are not equivalent among the three fish. Results from nanoindentation showed that the LL of tarpon scales is the hardest, followed by the carp and the arapaima and the differences in hardness are related to the apatite structure, possibly induced by the growth rate and environment of each fish.

Arola, Dwayne D.↗