Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Strain calculation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Realizing High Capacity and Zero Strain in Layered Oxide Cathodes via Lithium Dual-Site Substitution for Sodium-Ion Batteries

Sodium-ion batteries have garnered unprecedented attention as an electrochemical energy storage technology, but it remains challenging to design high-energy-density cathode materials with low structural strain during the dynamic (de)sodiation processes. In this paper, we report a P2-layered lithium dual-site-substituted Na 0.7 Li 0.03 [Mg 0.15 Li 0.07 Mn 0.75 ]O 2 (NMLMO) cathode material, in which Li ions occupy both transition-metal (TM) and alkali-metal (AM) sites. The combination of theoretical calculations and experimental characterizations reveals that Li TM creates Na–O–Li electronic configurations to boost the capacity derived from the oxygen anionic redox, while Li AM serves as LiO 6 prismatic pillars to stabilize the layered structure through suppressing the detrimental phase transitions. As a result, NMLMO delivers a high specific capacity of 266 mAh g –1 and simultaneously exhibits the nearly zero-strain characteristic within a wide voltage range of 1.5–4.6 V. Our findings highlight the effective way of dual-site substitution to break the capacity–stability trade-off in cathode materials for advanced rechargeable batteries.

25 ENERGY STORAGE↗
DOE OSTI2022

High Throughput Computational Framework of Materials Properties for Extreme Environments

This project aims to establish a framework capable of efficiently predicting the properties of structural materials for service in harsh environments over a wide range of temperatures and over long periods of time. The approach is to develop and integrate high throughput first-principles calculations in combination with machine learning (ML) methods, perform high throughput CALPHAD (calculations of phase diagrams) modeling, and carry out finite element method (FEM) simulations. Relevant to high temperature service in fossil power system, nickel-based superalloys such as Inconel 740 and Haynes 282 as well as the associated (Ni-Cr-Co)-Al-C-Fe-Mn-Mo-Nb-Si-Ti system, were investigated. The present framework was built on the concept of phase-based property data, in which properties of individual phases are modeled as a function of internal and external independent variables. This project established an open-source infrastructure with the following capabilities: (1) High throughput implementation of first-principles calculations at finite temperatures and variable compositions using both accurate phonon calculations and the efficient Debye model for thermodynamic properties, elastic constants, diffusion coefficients, vacancy formation, stacking and twin faults, and dislocation mobility; i.e., using the developed code DFTTK; (2) Machine learning capabilities to predict the above properties so that the number of first-principles calculations can be significantly reduced; e.g., using the developed code SIPFENN; (3) High throughput CALPHAD modeling of the above properties as a function of temperature and composition using our unique capability based on ESPEI and PyCalphad; (4) New capabilities to predict the stress-strain behavior of individual phases; and (5) New models for tensile strength prediction in common FEM software with the crystal plasticity finite element simulations (CPFEM).

, Ni-based superalloys↗
DOE OSTI2020

Stringing the Perylene Diimide Bow

Abstract This study explores a new mode of contortion in perylene diimides where the molecule is bent, like a bow, along its long axis. These bowed PDIs were synthesized through a facile fourfold Suzuki macrocyclization with aromatic linkers and a tetraborylated perylene diimide that introduces strain and results in a bowed structure. By altering the strings of the bow, the degree of bending can be controlled from flat to highly bent. Through spectroscopy and quantum chemical calculations, it is demonstrated that the energy of the lowest unoccupied orbital can be controlled by the degree of bending in the structures and that the energy of the highest occupied orbital can be controlled to a large extent by the constitution of the aromatic linkers. The important finding is that the bowing results not only in red‐shifted absorptions but also more facile reductions.

Liu, Taifeng↗
DOE OSTI2020

Stringing the Perylene Diimide Bow

This study explores a new mode of contortion in perylene diimides where the molecule is bent, like a bow, along its long axis. These bowed PDIs were synthesized through a facile fourfold Suzuki macrocyclization with aromatic linkers and a tetraborylated perylene diimide that introduces strain and results in a bowed structure. By altering the strings of the bow, the degree of bending can be controlled from flat to highly bent. Through spectroscopy and quantum chemical calculations, it is demonstrated that the energy of the lowest unoccupied orbital can be controlled by the degree of bending in the structures and that the energy of the highest occupied orbital can be controlled to a large extent by the constitution of the aromatic linkers. The important finding is that the bowing results not only in red-shifted absorptions but also more facile reductions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Ramifications of X-Site Ion Modification in a Zero-Dimensional Piezoelectric Tetrahalozincate

Using mixtures of A, B, or X site ions in piezoelectric hybrid organic inorganic materials has been shown to be an effective strategy to improve piezoelectric properties. Here, we investigated the effect of increasing Br content within histammonium tetrachlorozincate [HistNH3Zn(Cl x Br 1–x )4] by varying the relative amounts of Cl and Br from x = 0% to 100% on nonlinear optical and piezoelectric properties. We found that the crystal structures were unchanged with Br percentages up to 100%, but the melting point of the materials changed substantially with increasing Br content. On the other hand, the nonlinear optical properties were only moderately affected with increasing Br content. The piezoelectric response of each material was measured and compared with DFT calculated values, both of which agreed that the overall the materials had relatively similar d 33 coefficients. The x = 75% Br compound had the largest magnitude d 33 value at maximum strain at both 29 °C (−97.56 pm/V) and 40 °C (−92.00 pm/V). The observed negative piezoelectric response is a rare trait that was ascribed to the large number of intermolecular interactions between lattice elements, as described by others.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Neural networks for large eddy simulations of wall-bounded turbulence: numerical experiments and challenges

Here, we examine the application of neural network-based methods to improve the accuracy of large eddy simulations of incompressible turbulent flows. The networks are trained to learn a mapping between flow features and the subgrid scales, and applied locally and instantaneously—in the same way as traditional physics-based subgrid closures. Models that use only the local resolved strain rate are poorly correlated with the actual subgrid forces obtained from filtering direct numerical simulation data. We see that highly accurate models in a priori testing are inaccurate in forward calculations, owing to the preponderance of numerical errors in implicitly filtered large eddy simulations. A network that accounts for the discretization errors is trained and found to be unstable in a posteriori testing. We identify a number of challenges that the approach faces, including a distribution shift that affects networks that fail to account for numerical errors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

An Adaptive Reference Scheme to Extend the Functional Range of Optical Backscatter Reflectometry in Extreme Environments

Optical frequency domain reflectometry (OFDR) measurements are performed by recording the interference pattern of light backscattered by density fluctuations or Bragg gratings along the length of an optical fiber. Changes in local temperature or strain in the fiber cause shifts in the backscattered light spectrum, which can be calibrated to the applied temperature or strain. Comparing the backscattered optical spectra from each reflection site with a reference (unstrained) spectrum allows for quantification of local spectral shifts. While mature OFDR-based technologies can provide high-precision spatially distributed measurements over kilometer lengths, the post-processing approaches used to recover spectral shifts from raw optical intensity data can limit the use of OFDR in harsh environments. This paper presents a novel approach to post-processing OFDR data which extends the usability of optical fibers exposed to harsh environments. This approach is the first to use the spectral shift quality, calculated for two OFDR measurements, to identify an appropriate reference scan from which the spectral shift can be determined. Here, three experimental data sets are used to test the algorithm: (1) an optical fiber heated to >950°C, (2) an aluminum-embedded optical fiber under strain from differential thermal expansion, and (3) an optical fiber exposed to a total neutron flux of 2×10 13 n/cm 2 /s over 40 hours in a nuclear test reactor. Results show that using a metric of quality to select an appropriate reference measurement extends the functional range of OFDR strain and temperature sensors. Furthermore, this algorithm can be applied to existing OFDR data.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Asymmetric equilibrium core structures of pyramidal-II < c + a > dislocations in ten hexagonal-close-packed metals

The structures of pyramidal-II < c + a > dislocations, one of the most important defects in structural hexagonal-close-packed (HCP) metals, have not been fully characterized for many of the HCP metals in use today. Here, we employ ab initio informed phase-field dislocation dynamics to determine the minimum energy structure of pyramidal {1¯1¯22} < 11¯23 > dislocations in ten HCP metals, including Be, Co, Mg, Re, Ti, Zn, Cd, Hf, Y, and Zr. As input for the simulations, we calculate, using first-principles density functional theory, the {1¯1¯22} generalized stacking fault energy (GSFE) curves for all ten metals. From these calculations, it is found that magnetism in Co is necessary for achieving a local minimum in the GSFE curve. We observe in simulations that edge and screw character dislocations split into two partials separated by a low-energy intrinsic stacking fault. The splitting distance is shown to scale inversely with the local minimum energy normalized by the product of its shear modulus and Burgers vector. Interestingly, some HCP metals exhibit an asymmetric structure, with either unequal partial Burgers vectors or widths, in contrast to the symmetric configuration expected from linear elastic dislocation theory. We explain these structures by properties of the local maxima in their GSFE curves. Metals with larger degrees of elastic anisotropy result in dislocations with larger splitting distances than would be expected under the commonly used assumption of elastic isotropy. Furthermore, these findings on the sizes and asymmetry in the structures of pyramidal-II < c + a > dislocations are fundamental to understanding how these dislocations glide and interact or react with other defects when these metals are mechanically strained.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Nanoscale Polarization-Dependent Young’s Modulus of Ferroelectric BaTiO 3 Single Crystals

Flexoelectric fields produced by strong strain gradients at the nanoscale couple to ferroelectric polarization, promoting changes in the mechanical properties of ferroelectric materials as a function of the direction of the ferroelectric polarization. In this work, we calculate the asymmetry in the Young’s modulus found in oppositely polarized out-of-plane domains of BaTiO 3 single crystals by means of contact resonance AFM, and we evaluate its impact on the electromechanical response as measured by piezoresponse force microscopy, both using band excitation modes. Furthermore, we analyze the electromechanical response of the different BaTiO 3 domains using k-means to build up their mean elastic and electromechanical features and quantify the flexoelectrically induced modulation of the Young’s modulus. Finally, we discuss the use of contact Kelvin probe force microscope measurements to decouple electrostatic artifacts from purely piezoelectric ones when flexoelectric coupling appears.

BaTiO 3 single crystals↗
DOE OSTI2023

Direct growth of crystalline SiGe nanowires on superconducting NbTiN thin films

Novel heterostructures created by coupling one-dimensional semiconductor nanowires with a superconducting thin film show great potential toward next-generation quantum computing. Here, by growing high-crystalline SiGe nanowires on a NbTiN thin film, the resulting heterostructure exhibits Ohmic characteristics as well as a shift of the superconducting transition temperature (T c ). The structure was characterized at atomic resolution showing a sharp SiGe/NbTiN interface without atomic interdiffusion. Lattice spacing, as calculated from large-area x-ray diffraction experiments, suggests a potential preferred d-spacing matching between (200) NbTiN and (110) SiGe grains. The observed out-of-plane compressive strain within the NbTiN films coupled with SiGe nanowires explains the downward shift of the superconductivity behavior. The presented results post scientific insights toward functional heterostructures by coupling multi-dimensional materials, which could enable tunable superconductivity that benefits the quantum science applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

New developments including X-ray standing waves in the dynamical Bragg diffraction program of X-ray Server

X-ray Server (https://x-server.gmca.aps.anl.gov) is a collection of programs for online modelling of X-ray diffraction and scattering. Additionally, the dynamical diffraction program is the second most popular Server program, contributing 34% of total Server usage. It models dynamical X-ray diffraction from strained crystals and multilayers for any Bragg-case geometry including grazing incidence and exit. This paper reports on a revision of equations used by the program, which yields ten times faster calculations in most use cases, on implementing calculations of X-ray standing waves and on adding new options for modelling diffraction from monolayers.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Excitons in strained and suspended monolayer WSe 2

Here, we study suspended membranes of atomically thin WSe 2 as hosts of excitons. We perform optical reflectance measurements to probe the exciton physics and obtain the peak energies for the 1$s$, 2$s$, and 3$s$ states of the $A$ exciton in suspended WSe 2 and consider supported membranes as a reference. We find that elimination of the influence of the dielectric environment enables a strong electron–hole interaction and a concomitant increase in the exciton binding energy in suspended monolayer (1L) WSe 2 . Based on the experimental results, we calculate the excitonic binding energies by employing the recently developed quantum electrostatic heterostructure model and the commonly employed Rytova–Keldysh potential model. We see that the binding energy of the ground state $A$ exciton increases from about 0.3 eV (on a substrate) to above 0.4 eV (suspended). We also exploit the tunability of the excitons in suspended samples via mechanical strain. By applying external gas pressure of 2.72 atm to a 1L suspended over a circular hole of 8 μm diameter, we strain the WSe 2 and obtain a reversible 0.15 eV redshift in the exciton resonance. The linewidth of the $A$ exciton decreases by more than half, from about 50 to 20 meV under 1.5% biaxial strain at room temperature. This line narrowing is due to the suppression of intervalley exciton–phonon scattering. By making use of the observed strain-dependent optical signatures, we infer the two-dimensional (2D) elastic moduli of 1L and 2L WSe 2 . Our results exemplify the use of suspended 2D materials as novel systems for fundamental studies, as well as for strong and dynamic tuning of their optical properties.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Co-Based superalloy morphology evolution: A phase field study based on experimental thermodynamic and kinetic data

Cobalt-based superalloys with two phase $\gamma$/$\gamma '$ microstructures offer great promise as candidates for next-generation high-temperature alloys for applications, such as turbine blades. It is essential to understand the thermodynamic and kinetic factors that influence the microstructural evolution of these alloys in order to optimize the alloy compositions and processing steps with a goal to improve their coarsening, creep and rafting behavior. We are using a continuum phase field approach to study the diffusion process and to predict the equilibrium shapes of Co-Al-W $\gamma '$ precipitates. In order to obtain quantitatively predictive capabilities, we extract chemical free energies for the $\gamma$/$\gamma '$ phases based on CALculation of PHAse Diagrams (CALPHAD) thermodynamic data and diffusion mobilities for Co alloys based on CALPHAD kinetic data. We also use experimental or first-principles data for other quantities, such as misfit strain and interface information, for the parameterization of our model. A particular focus of our study is to understand how different energy balances, misfit strain and kinetics affect the coarsening and rafting behavior of $\gamma '$ precipitates, and the sensitivity of the final precipitate shape to materials parameters. Here, we find that the equilibrium shape of the precipitate results from a delicate competition between chemical, interfacial, and elastic energies, and it is very sensitive to changes in model parameters. Here, we examine how modeling input parameters affect the equilibrium shape of precipitates and relate these parameters to experimentally available values.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Q-POP-Thermo: A general-purpose thermodynamics solver for ferroelectric materials

We report that Q-POP-Thermo is a program designed to compute thermodynamic monodomain equilibrium states and their properties for ferroelectric single crystals and thin films based on the Landau-Ginzburg-Devonshire (LGD) Theory. Utilizing symbolic manipulation with the SymPy Library, the governing equations along with appropriate boundary conditions are solved for speedy minimization of the free energy of a crystal. Utilizing the popular Differential Evolution algorithm, with appropriate hybridization, multiple phase diagrams, such as the pressure-temperature phase diagram for bulk single crystals and the common strain-temperature phase diagram for monodomain thin-film systems can be readily generated. Furthermore, a variety of material properties of stable ferroelectric phases, including dielectric, piezoelectric, and electrocaloric properties, can simultaneously be calculated. Validation studies are presented for both thin-film and single crystal systems to test the effectiveness and capability of the open-source program.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Porosity evolution under increasing tension in wire-arc additively manufactured aluminum using in-situ micro-computed tomography and convolutional neural network

Internal defects such as porosities are often formed in additively manufactured metal components. The pores nucleate, grow, and coalesce to form cracks under loads, leading to eventual catastrophic failure. Here, in this paper, the full-field porosity evolution, including pore growth and coalescence in a wire-arc additively manufactured (WAAM) aluminum alloy cylinder under tension is observed with in-situ X-ray micro-computed tomography (μCT). The pore size distribution, density, and tensile stress are calculated from the volumetric images analyzed by a convolutional neural network (CNN) algorithm, which provides rapid analysis of 12,950 slice images from μCT volumetric images at the reference state and 13 tensile strains. The results show the quantitative evolution of the growth and coalescence of macropores under tension. A strong correlation is found between the local pore volume fraction and the true tensile stress when the tensile strain is larger than 5%.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Theoretical and experimental studies of compression and shear deformation behavior of Osmium to 280 GPa

Abstract The compression behavior of osmium metal was investigated up to 280 GPa (volume compression V/V o = 0.725) under nonhydrostatic conditions at ambient temperature using angle dispersive axial x-ray diffraction (A-XRD) with a diamond anvil cell (DAC). In addition, shear strength of osmium was measured to 170 GPa using radial x-ray diffraction (R-XRD) technique in DAC. Both diffraction techniques in DAC employed platinum as an internal pressure standard. Density functional theory (DFT) calculations were also performed, and the computed lattice parameters and volumes under compression are in good agreement with the experiments. DFT predicts a monotonous increase in axial ratio ( c/a ) with pressure and the structural anomalies of less than 1% in ( c/a ) ratio reported below 150 GPa were not reproduced in theoretical calculations and hydrostatic measurements. The measured value of shear strength of osmium ( τ ) approaches a limiting value of 6 GPa above a pressure of 50 GPa in contrast to theoretical predictions of 24 GPa and is likely due to imperfections in polycrystalline samples. DFT calculations also enable the studies of shear and tensile deformations. The theoretical ideal shear stress is found along the (001)[1–10] shear direction with the maximal shear stress ∼24 GPa at critical strain ∼0.13.

Lin, Chia-Min↗
DOE OSTI2021

Stress-induced phase transitions in nanoscale CuInP 2 S 6

Using the Landau-Devonshire approach and available experimental results, we constructed multiwell thermodynamic potential of the layered ferroelectric CuInP 2 S 6 (CIPS). The analysis of temperature dependences of the dielectric permittivity and lattice constants for different applied pressures unexpectedly reveals the critically important role of a nonlinear electrostriction in this material. With the nonlinear electrostriction included we calculated the temperature and pressure phase diagrams and spontaneous polarization of a bulk CIPS, within the assumed range of applicable temperatures and applied pressures. Using the developed thermodynamic potential, we revealed the strain-induced phase transitions in thin epitaxial СIPS films, as well as the stress-induced phase transitions in СIPS nanoparticles, the shape of which varies from prolate needles to oblate disks. Furthermore, w also revealed the strong influence of a mismatch strain, elastic stress, and shape anisotropy on the phase diagrams and polar properties of a nanoscale CIPS, and derived analytical expressions allowing for elastic control of the nanoscale CIPS polar properties. Hence obtained results can be of particular interest for the strain engineering of nanoscale layered ferroelectrics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Strain-tuning of domain walls in multilayer graphene probed in the quantum Hall regime

Domain walls, topological defects that define the frontier between regions of different stacking order in multilayer graphene, have proved to host exciting physics. The ability to tune these topological defects in situ in an electronic transport experiment brings a wealth of possibilities in terms of fundamental understanding of domain walls as well as for electronic applications. Here, we demonstrate, through a MEMS (microelectromechanical system) actuator and magnetoresistance measurements, the effect of domain walls in multilayer graphene quantum Hall effect. Reversible and controlled uniaxial strain triggers the topological defects, manifested as addtional quantum Hall effect plateaus as well as a discrete and reversible modulation of the current across the device. Furthermore, our findings are supported by theoretical calculations and constitute indication of the in situ tuning of topological defects in multilayer graphene probed through electronic transport, opening the way for the use of reversible topological defects in electronic applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗