Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Stabilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Small-Signal Stability Support from Dynamically Configurable Grid-Forming/Following Inverters for Distribution Systems: Preprint

As the penetration of inverter-based resources (IBRs) continues to increase in modern power systems, system stability is challenged by the insufficient inertia induced by IBRs; hence, there is a need to develop various methods to address the potential instabilities. In this paper, grid-forming (GFM) and grid-following (GFL) controls are implemented for inverters with flexible-mode transitions between them. The operation mode transition between GFM and GFL controls is adopted as an additional degree of control flexibility to adjust the small signal stability margin. Further, a holistic and detailed small signal model of the entire system with the dynamics from both synchronous generators (SGs) and IBRs is derived. The effectiveness of the proposed work in adjusting the system small signal stability margin is validated by conducting case studies with varying penetration levels of IBRs. A test system with one SG and five inverters was implemented in MATLAB/Simulink to demonstrate the effectiveness of the proposed approach. Index Terms - grid-following control, grid-forming control, operation mode transition, small-signal stability analysis

grid-following control↗
DOE OSTI2024

System Modeling and Robust Stability Region Analysis for Multi-inverters Based on VSG

As the number of inverter-interfaced distributed generators (IIDGs) increases, the decrease in the inertia of the microgrid affects the stability of microgrid voltage and current. The virtual synchronous generator (VSG) control method simulates the output characteristics of the synchronous machine to improve the inertia and damping of the microgrid. However, low-frequency oscillations can occur in systems with multi-VSGs connected in parallel, primarily when operating in island mode. Therefore, this article develops the small-signal state-space model for multi-inverters based on VSG and analyses the robust stability region (RSR) of the control parameters. Firstly, an extensible small-signal state-space model is established and simplified in the dq axis, which is a necessary preprocessing for the subsequent stability analysis. Secondly, the guardian map method based on bialternate product operation is constructed, and the RSR is established through translation mapping and rotation mapping. Therefore, the solution of RSR is transformed into the problem of identifying the Hurwitz matrix. Finally, the simulations and experiments verify that the calculated region can ensure stable operation during startup and meet the requirement to suppress low-frequency oscillations. In conclusion, the method of solving RSR proposed in this paper provides a basis for selecting controller parameters in practical engineering.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

Comparison of the Thermal Stability in Equal‐Channel‐Angular‐Pressed and High‐Pressure‐Torsion‐Processed Fe–21Cr–5Al Alloy

Nanostructured steels are expected to have enhanced irradiation tolerance and improved strength. However, they suffer from poor microstructural stability at elevated temperatures. In this study, Fe–21Cr–5Al–0.026C (wt%) Kanthal D (KD) alloy belonging to a class of (FeCrAl) alloys considered for accident‐tolerant fuel cladding in light‐water reactors is nanostructured using two severe plastic deformation techniques of equal‐channel angular pressing (ECAP) and high‐pressure torsion (HPT), and their thermal stability between 500–700 °C is studied and compared. ECAP KD is found to be thermally stable up to 500 °C, whereas HPT KD is unstable at 500 °C. Microstructural characterization reveals that ECAP KD undergoes recovery at 550 °C and recrystallization above 600 °C, while HPT KD shows continuous grain growth after annealing above 500 °C. Enhanced thermal stability of ECAP KD is from significant fraction (>50%) of low‐angle grain boundaries (GBs) (misorientation angle 2–15°) stabilizing the microstructure due to their low mobility. Small grain sizes, a high fraction (>80%) of high‐angle GBs (misorientation angle >15°) and accordingly a large amount of stored GB energy, serve as the driving force for HPT KD to undergo grain growth instead of recrystallization driven by excess stored strain energy.

Arivu, Maalavan↗
DOE OSTI2025

Dual‐Gradient Construction on Li‐Rich Cathodes for High Stability Lithium Battery

Abstract The practical applications of high‐energy Li‐rich layered oxides (LLOs) have been hindered by the severe performance degradation including voltage decay and capacity fading. The gradient construction toward high‐activity interior and high‐stability exterior, typically realized by gradually changed transition metal (TM) gradient in LLOs, can alleviate the performance degradation to certain degrees. In this study, a gradient design of Al/Mg dopants is demonstrated for the TM‐gradient LLOs to further harmonize the high‐activity interior and high‐stability exterior, thereby forming the dual (TM and doping) gradient. As a result, superior capacity retention of 86% and a minor voltage decay of 0.54 mV cycle −1 are achieved at 1 C after 300 cycles. The improved electrochemical stability of the dual‐gradient LLO is attributed to the enhanced surface stability and suppressed bulk structure degeneration of LLOs upon electrochemical cycling. The dual‐gradient design serves as an important approach to fabricate high‐performance bulk LLOs toward applications.

Wu, Tianhao↗
DOE OSTI2020

Quasi‐Binary Transition Metal Dichalcogenide Alloys: Thermodynamic Stability Prediction, Scalable Synthesis, and Application

Abstract Transition metal dichalcogenide (TMDCs) alloys could have a wide range of physical and chemical properties, ranging from charge density waves to superconductivity and electrochemical activities. While many exciting behaviors of unary TMDCs have been demonstrated, the vast compositional space of TMDC alloys has remained largely unexplored due to the lack of understanding regarding their stability when accommodating different cations or chalcogens in a single‐phase. Here, a theory‐guided synthesis approach is reported to achieve unexplored quasi‐binary TMDC alloys through computationally predicted stability maps. Equilibrium temperature–composition phase diagrams using first‐principles calculations are generated to identify the stability of 25 quasi‐binary TMDC alloys, including some involving non‐isovalent cations and are verified experimentally through the synthesis of a subset of 12 predicted alloys using a scalable chemical vapor transport method. It is demonstrated that the synthesized alloys can be exfoliated into 2D structures, and some of them exhibit: i) outstanding thermal stability tested up to 1230 K, ii) exceptionally high electrochemical activity for the CO 2 reduction reaction in a kinetically limited regime with near zero overpotential for CO formation, iii) excellent energy efficiency in a high rate Li–air battery, and iv) high break‐down current density for interconnect applications. This framework can be extended to accelerate the discovery of other TMDC alloys for various applications.

Hemmat, Zahra↗
DOE OSTI2020

Blading Phase–Pure Formamidinium–Alloyed Perovskites for High–Efficiency Solar Cells with Low Photovoltage Deficit and Improved Stability

Currently, blade-coated perovskite solar cells (PSCs) with high power conversion efficiencies (PCEs), i.e. greater than 20%, normally employ methylammonium lead tri-iodide with a sub-optimal bandgap. Alloyed perovskites with formamidinium (FA) cation have narrower bandgap and thus enhance device photocurrent. However, FA-alloyed perovskites show low phase stability and high moisture sensitivity. Here, we report that incorporating 0.83 molar percent organic halide salts (OHs) into the perovskite inks enables phase-pure, highly crystalline FA-alloyed perovskites with extraordinary optoelectronic properties. Here, the OH molecules modulate the crystal growth, enhance the phase stability, passivate ionic defects at the surface and/or grain boundaries, and enhance the moisture stability of the perovskite film. We demonstrate a high efficiency of 22.0% under 1 sun illumination for blade-coated PSCs with an open-circuit voltage of 1.18 V, corresponding to a very small voltage deficit of 0.33 V, and significantly improved operational stability with 96% of the initial efficiency retained under one sun illumination for 500 hours.

14 SOLAR ENERGY↗
DOE OSTI2022

High-Entropy and Superstructure-Stabilized Layered Oxide Cathodes for Sodium-Ion Batteries

Layered transition metal oxides are appealing cathodes for sodium-ion batteries due to their overall advantages in energy density and cost. But their stabilities are usually compromised by the complicated phase transition and the oxygen redox, particularly when operating at high voltages, leading to poor structural stability and substantial capacity loss. Here, in this study, an integrated strategy combing the high-entropy design with the superlattice-stabilization to extend the cycle life and enhance the rate capability of layered cathodes is reported. It is shown that the as-prepared high-entropy Na 2/3 Li 1/6 Fe 1/6 Co 1/6 Ni 1/6 Mn 1/3 O 2 cathode enables a superlattice structure with Li/transition metal ordering and delivers excellent electrochemical performance that is not affected by the presence of phase transition and oxygen redox. It achieves a high reversible capacity (171.2 mAh g –1 at 0.1 C), a high energy density (531 Wh kg –1 ), extended cycling stability (89.3% capacity retention at 1 C for 90 cycles and 63.7% capacity retention at 5 C after 300 cycles), and excellent fast-charging capability (78 mAh g –1 at 10 C). This strategy would inspire more rational designs that can be leveraged to improve the reliability of layered cathodes for secondary-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2025

Symmetry‐Breaking Strategy Yields Dopant‐Free Small Molecule Hole Transport Materials for Inorganic Perovskite Solar Cells with 20.58% Efficiency and Outstanding Stability

Abstract Inorganic perovskites are known for their excellent photothermal stability; however, the photothermal stability of all‐inorganic n‐i‐p perovskite solar cells (PSCs) is compromised due to ion diffusion and free radical‐induced degradation caused by the use of doped spiro‐OMeTAD hole transport materials (HTMs). In this study, two isomeric donor–acceptor–donor (D–A–D) type small molecules, namely HBT and HiBT, were developed and used as dopant‐free HTMs, using 2,1,3‐benzothiadiazole or benzo[d][1,2,3]thiadiazole as acceptor moieties. The HiBT molecule, with its symmetry‐breaking features, exhibits a large dipole moment, enhanced coordination‐active sites, and a well‐aligned energy level structure, all of which contribute to passivating perovskite surface defects and improving free charge separation. As a result, inorganic CsPbI 3 PSCs with HiBT HTM achieved an impressive power conversion efficiency (PCE) of 20.58%, the highest reported for dopant‐free HTM‐based inorganic PSCs. Moreover, the enhanced hydrophobic properties of HiBT molecules, coupled with their ability to passivate perovskite surface defects, contribute to significantly improved device stability. The unencapsulated devices based on HiBT HTM retained over 83% and 80% of their initial efficiency after being stored at 85 °C for 50 days and undergoing maximum power point (MPP) tracking at 85 °C for 1100 h, respectively. These results highlight that the symmetry‐breaking strategy is an exceptionally effective approach for designing efficient, dopant‐free small molecule HTMs, significantly contributing to both the high efficiency and enhanced stability of all‐inorganic PSCs.

Chemistry↗
DOE OSTI2022

Consequences of Intrapore Liquids on Reactivity, Selectivity, and Stability for Aldol Condensation Reactions on Anatase TiO 2 Catalysts

Abstract This study provides evidence and mechanistic interpretations for the significant consequences of intrapore non‐polar liquids on acetone aldol condensation turnover rates, selectivity to primary dimer products, and catalyst stability for reactions at Lewis acid‐base site pairs on TiO 2 surfaces. These non‐polar liquids confer such benefits through the preferential stabilization of transition states (TS) for adsorption (“entry”) and desorption (“exit”) steps, which place their respective reactants or products within a solvating outer sphere environment. The extent to which non‐polar fluids ( n ‐heptane) form an intrapore liquid phase within TiO 2 voids was obtained from N 2 uptakes using established formalisms that consider the different molal volume, surface tension, and volatility between N 2 and n ‐heptane. Acetone condensation rates are limited by C−H activation, an “entry” step that forms bound prop‐1‐en‐2‐olates via a TS stabilized by intrapore liquids, leading to higher aldol condensation turnover rates as n ‐heptane pressure increases and active TiO 2 surfaces become increasingly immersed within a non‐polar liquid phase. These liquids solvate the late TS structures that mediate the desorption of primary C 6 condensation products even more effectively than those involved in prop‐1‐en‐2‐olate formation or in nucleophilic attack events that later form C−C bonds. Such preferential solvation favors desorption over C−C coupling events, thus disfavoring the formation of larger oligomers that become stranded at active sites, thus leading to much slower deactivation. Moreover, solvation by non‐polar liquids also leads to C 6 alkanones as the sole products formed in a single surface sojourn. These effects of a non‐polar dense phase circumvent the inherent stability, reactivity, and selectivity hurdles that have precluded practical aldol condensation catalysis on Lewis acid‐base pairs at oxide surfaces; these consequences are demonstrated here for TiO 2 catalysts, acetone aldol condensation reactions, and n ‐heptane as the non‐polar liquid but through strategies, concepts, and mechanistic features that extend to other systems. More generally, these observations and their mechanistic origins demonstrate how a contacting liquid preferentially solvates TS structures for elementary steps that involve either reactants arriving from or products entering into an outer sphere environment that contains a dense non‐polar phase.

Kadam, Shashikant A.↗
DOE OSTI2025

Bio‐Inspired In Situ Tuning of the Hydrophobic Environment Around Catalytically Active Organic Ligand‐Stabilized Ruthenium Nanoparticles

Abstract The organic ligand environment surrounding enzymatic and homogeneous catalytic active sites often determines catalytic activity. Ruthenium nanoparticles, ≤1 nm in diameter, are synthesized using monodentate thiol, monodentate phosphine, and bidentate bisphosphine ligands. Even though some of the ruthenium surface is blocked by the ligands, catalytic activity is still observed for CO oxidation and H 2 O 2 decomposition. All three ligand‐stabilized ruthenium nanoparticles have similar CO oxidation rates; however, the bisphosphine‐stabilized Ru nanoparticles are approximately 2.5 times less active than the monothiol‐stabilized and monophosphine‐stabilized ruthenium nanoparticles for H 2 O 2 decomposition. It is observed that the organic ligand environment is modulated in situ during nanoparticle synthesis via partial oxidation of the bisphosphine as confirmed by 31 P NMR measurements. We hypothesize that bisphosphine‐bound Ru nanoparticles consist of a Ru core with some of the ligands bound in a monodentate manner where the other P atom is oxidized and not bound to the Ru surface leading to a thicker hydrophobic layer around the Ru nanoparticles. The increase in hydrophobicity is confirmed via contact angle and zeta potential measurements. H 2 O 2 decomposition rates are known to decrease with increasing hydrophobicity, and this work illustrates a pathway for increasing hydrophobicity in situ using ligand‐bound metallic nanoparticles.

Sufyan, Sayed Abu [Department of Chemical Engineer↗
DOE OSTI2023

Crystal Structures of Diaryl Hydrazone and Sulfone Stabilizers in Complex with an Amyloidogenic Light Chain Reveal an Alternate Ligand‐Binding Cavity

Abstract Stabilization of amyloidogenic immunoglobulin light chains (LCs) by binding of small molecule “kinetic stabilizers” is under development as a novel treatment for light chain amyloidosis. From a high‐throughput screen, we previously identified 16 full‐length (FL) LC stabilizers from five distinct chemotypes. We then obtained structural biological information on two classes of hits, coumarins and hydantoins, revealing that both chemotypes bind to a pocket at the V L −V L interface of the FL LC dimer. Here, we report crystal structures of three screening hits from two other chemotypes, diaryl hydrazones and sulfones, in complex with an amyloidogenic FL LC. While two of these hits bind to the previously identified pocket, one diaryl hydrazone binds to a different pocket bisected by the C 2 symmetry axis of the dimer. These data further expand on the FL LC stabilizer‐binding surface that could be used in design of more potent FL LC aggregation inhibitors.

Chemistry↗
DOE OSTI2021

Partial substitution of rice husks for manure in greenhouse vegetable fields: Insight from soil carbon stock and aggregate stability

Abstract Soil aggregate stability and C stock are key factors in greenhouse vegetable production, which are influenced by the application of different organic materials. However, the responses of soil aggregate stability and C stock to organic amendment in greenhouse vegetable fields are not well understood. A 5‐year study was carried out in greenhouse vegetable fields to investigate the effect of partial substitution of rice husks for manure on soil aggregate stability, C compositions, and their relationships. Four treatments included: (a) no organic fertilization (control), (b) 30 t ha −1 chicken manure (CM), (c) 30 t ha −1 rice husks (RH), and (d) 10 t ha −1 chicken manure plus 20 t ha −1 rice husks (MR). Rice husks addition significantly increased the proportion of >2 mm aggregates and mean weight diameter (MWD), while manure addition showed no difference with control. Polysaccharide and humin (HM) were increased with rice husks addition (RH and MR) compared with that in CM treatment. Polysaccharide and HM caused 86.03% variation of soil aggregate, in which polysaccharide and HM contributed 76.3 and 9.7%, respectively. The soil C stock in CM, RH, and MR treatments was increased by 146, 175, and 164% compared with control, respectively. Aliphatic‐C and amorphous Fe‐oxides (Fe‐ox) content were as higher in MR added soil than those in RH treatment. Partial substitution of rice husk for manure improved soil aggregation stability and thus enhanced C stock by suppling more polysaccharide, HM and liberated soil minerals, which was conducive to the sustainable development in greenhouse vegetable production.

Fei, Chao↗
DOE OSTI2024

Cover crops and poultry litter impact on soil structural stability in dryland soybean production in southeastern United States

Abstract This study explored the efficacy of soil aggregate indices in quantifying soil structural development, utilizing 5‐year field experiment data from the Southeastern United States. The experiment utilized a split‐plot design with cover crops (native vegetation as control, cereal rye (Secale cerealeL.), winter wheat (Triticum aestivum), hairy vetch (Vicia villosa), and mustard (Brassica rapa) plus cereal rye as the main factor and fertilizer source (no fertilizer as control, inorganic fertilizer with phosphorus, potassium, and elemental sulfur, and poultry litter) as the secondary factor. Aggregate size fractions were determined using the wet‐sieving method, and aggregate stability index (ASI), mean weight diameter (MWD), geometric mean diameter (GMD), and fractal dimension (FD) were calculated to assess soil structural stability. Main effects results indicated that cereal rye (55.11%) and poultry litter (50.97%) exhibited the highest ASI values. The highest MWD, GMD, and FD were observed under mustard plus cereal rye (1.187 mm), cereal rye (0.462 mm), and hairy vetch (2.573), respectively. Principal component analysis revealed that cover crops significantly improved soil aggregate structure and stability, overcoming limitations of sole fertilization practices. Regression analysis suggested that ASI, MWD, and GWD positively correlated with soil organic carbon, whereas FD negatively correlated with MWD, GMD, and ASI. Principal component analysis exhibited that FD decreased with increasing soil organic carbon, ASI, MWD, and GMD, demonstrating that lower FD values indicate enhanced soil aggregation and structure. Assessed indices, FD included, effectively gauged soil structural stability. These metrics should be prioritized in managerial decisions to support soil productivity and health in agricultural systems.

Agriculture↗
DOE OSTI2022

Novel catalysts with multivalence copper for organic pollutants removal from wastewater with excellent selectivity and stability in Fenton‐like process under neutral pH conditions

Abstract Fenton‐like reaction has been widely used for organics degradation. However, most Fenton‐like reaction works at low pH range (pH < 4) with uncontrollable selectivity of hydroxyl radicals from H 2 O 2 activation, and unsatisfied catalyst stability, which is compromised advanced oxidation performance for water/wastewater treatments. In this work, to solve the drawbacks, novel copper catalysts were fabricated via hydrogen reduction/calcination of Cu 2+ ‐supported Al/MCM‐41 with precisely controllable copper valence state. Compared with catalysts with monovalence copper (i.e., CuO, Cu, and Cu 2+ ), the obtained catalysts with multivalence copper present higher selectivity, excellent stability towards •OH radical pathways, and outperformance in p CBA degradation efficiency at neutral state. In addition, the fabricated catalysts also exhibited excellent phenol removal efficiency (75.5%) and H 2 O 2 utilization efficiency (47.9%) within neutral environment. Moreover, the degradation efficiency of phenol approaches to 100% within only 2 h. The catalyst also shows good stability for organic pollutants removal, which shows good potential in catalytic oxidation for phenolic compounds‐containing wastewater in Fenton‐like reaction, especially under neutral pH conditions. Practitioner Points Multivalence copper presents great potentials for organic compounds removal at neutral condition. Multivalence copper shows higher selectivity toward •OH and good stability at neutral condition. Multivalence copper exhibiters outperformed phenol removal efficiency at neutral condition.

Li, Haitao↗
DOE OSTI2020

Vacuum stability in inert higgs doublet model with right-handed neutrinos

We analyze the vacuum stability in the inert Higgs doublet extension of the Standard Model (SM), augmented by right-handed neutrinos (RHNs) to explain neutrino masses at tree level by the seesaw mechanism. We make a comparative study of the high- and low-scale seesaw scenarios and the effect of the Dirac neutrino Yukawa couplings on the stability of the Higgs potential. Bounds on the scalar quartic couplings and Dirac Yukawa couplings are obtained from vacuum stability and perturbativity considerations. These bounds are found to be relevant only for low-scale seesaw scenarios with relatively large Yukawa couplings. The regions corresponding to stability, metastability and instability of the electroweak vacuum are identified. These theoretical constraints give a very predictive parameter space for the couplings and masses of the new scalars and RHNs which can be tested at the LHC and future colliders. The lightest non-SM neutral CP-even/odd scalar can be a good dark matter candidate and the corresponding collider signatures are also predicted for the model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Comparative study of three yttrium organometallic compounds for the stabilization of the cubic phase in YSZ deposited by PE-CVD

In this work, the efficiencies of three organometallic yttrium precursors used to produce YSZ coatings by plasma-enhanced chemical vapor deposition were studied. Yttrium (III) acetylacetonate, Y (acac) 3 , yttrium (III) hexafluoroacetylacetonate, Y (acacF 6 ) 3 , and yttrium (III) tris(2,2,6,6-tetramethyl-3,5-heptanedionate), Y (tmhd) 3 , were used to stabilize the cubic phase in zirconia deposited at temperatures from 500 to 800 °C. Our results showed that at temperatures between 500 and 600 °C, Y (tmhd) 3 appeared to be the most efficient dopant as it introduced the highest concentration of yttria (1–2.7 mol%) with only 6.4–5.6 at.% carbon. However, at 700 and 800 °C, Y (acac) 3 introduced twice as much yttria (8–15 mol%) as Y (tmhd) 3 with almost the same amount of carbon (5.4–3 at.%). Conversely, Y (acacF6)3 was the least efficient as it maintained a low concentration of yttria of around 0.7–1.8 mol% with 3.6–8.2 at.% carbon for all the deposition temperatures. Among these precursors, only Y (acac) 3 surpassed 8 mol% yttria and achieved a fully stabilized cubic phase at 800 °C, with the remaining samples stabilizing only the tetragonal phase. The tetragonal phase was stabilized due to the formation of crystallites of around 10 nm. The observed difference in the efficiency of the three precursors was correlated to important differences in their decomposition behavior as observed by mass spectrometry and thermogravimetry/differential scanning calorimetry.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Continuous stabilization of polyacrylonitrile (PAN) - carbon nanotube (CNT) fibers by Joule heating

We report stabilization is one of the important processes used to convert polyacrylonitrile (PAN) fibers into carbon fiber and is usually driven by energy-intensive and time-consuming convective heating. A continuous and energy-efficient alternative is desirable. Here, a continuous Joule heating process has been used for the first time to stabilize PAN fibers containing carbon nanotubes (CNT). Single-component PAN/CNT fibers and bi-component fibers with core-sheath geometry were fabricated through the gel spinning method. Joule heating was conducted continuously on a 200 filament bundle for single-component fibers and on bundles with up to 6000 filaments for the bi-component fibers. A model of heat transfer and thermodynamics occurring during Joule heating is developed and utilized to understand the reductions in stabilization time and energy consumed when compared to convective heating. The minimum energy needed for stabilization through Joule heating is estimated to be less than 1% of the energy used through convective heating.

42 ENGINEERING↗
DOE OSTI2025

Mixed lipid bilayers enable enhanced stability and activity retention of Lipase A in low-pH environments

Lipase A (LipA) from Bacillus subtilis is a versatile and industrially relevant enzyme, but its activity is compromised under acidic conditions due to aggregation and deactivation. In this study, we investigated the use of mixed lipid bilayers to stabilize and improve activity retention of LipA at low pH. Attachment to lipid bilayers, particularly those containing cationic lipids, greatly enhanced the long-term stability of LipA in acidic conditions while also leading to improvements in activity. Tethering to cationic bilayers not only shifted the apparent pH activity profile toward more acidic conditions, but also significantly enhanced activity retention upon incubation at pH 6. Notably, this protective effect persisted even without direct tethering, indicating that reversible, non-covalent interactions with the bilayer surface are sufficient for long-term stability. Circular dichroism further revealed that the secondary structure of LipA was retained, while dynamic light scattering suggested that activity loss in solution was primarily due to aggregation of the native state. Together, these findings support a model in which lipid bilayers mitigate aggregation and stabilize LipA through transient interactions and electrostatic modulation of the local surface environment. Furthermore, this approach exemplifies a simple, tether-free strategy for enhancing enzyme performance in acidic or destabilizing conditions, with implications for biocatalysis, biosensing, and therapeutic delivery.

Biocatalysis↗