SEARCH · Engineering Papers

Results for “Space Missions Dynamical Systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

All sources NASA NTRS DOE OSTI

NASA NTRS1976

Applications Study of Aero-Maneuvering Orbit-to-Orbit Shuttle (AMOOS), Executive Summary

Preliminary designs and the supporting analysis for both the Aeromaneuvering Orbit-to-Orbit Shuttle (AMOOS) and the Aeromaneuvering Recovery System (AMRS) are presented. The AMOOS design is shown to yield from twice to almost three times the high energy, round-trip payloads as a purely propulsive vehicle of the same weight. Typically AMOOS can perform a crew rotation mission to equatorial geosynchronous orbit in one space shuttle launch. The flight test program analysis modeled parameters such as maximum dynamic pressure, heating rates, guidance, stability and recovery. Two model flight schedules were developed, one consisting of four flights and the other of two flights. The former is considered a very low risk, high information return program whereas the latter is a minimal cost program consistent with reasonable data returns and chance of success. The AMOOS and AMRS guidance scheme developed using linear regulator theory proved a precise and accurate guidance scheme. Both it and a classical linear system's based scheme were evaluated using 65 simulated trajectories in which the position in the entry corridor and the atmospheric density were varied randomly.

White, J.↗

NASA NTRS1997

2 kWe Solar Dynamic Ground Test Demonstration Project: Executive Summary - Volume 1

The Solar Dynamic Ground Test Demonstration (SDGTD) successfully demonstrated a solar-powered closed Brayton cycle system in a relevant space thermal environment. In addition to meeting technical requirements the project was completed 4 months ahead of schedule and under budget. The following conclusions can be supported: 1. The component technology for solar dynamic closed Brayton cycle technology has clearly been demonstrated. 2. The thermal, optical, control, and electrical integration aspects of systems integration have also been successfully demonstrated. Physical integration aspects were not attempted as these tend to be driven primarily by mission-specific requirements. 3. System efficiency of greater than 15 percent (all losses fully accounted for) was demonstrated using equipment and designs which were not optimized. Some preexisting hardware was used to minimize cost and schedule. 4. Power generation of 2 kWe. 5. A NASA/industry team was developed that successfully worked together to accomplish project goals. The material presented in this report will show that the technology necessary to design and fabricate solar dynamic electrical power systems for space has been successfully developed and demonstrated. The data will further show that achieved results compare well with pretest predictions. The next step in the development of solar dynamic space power will be a flight test.

Alexander, Dennis↗

NASA NTRSDate not supplied

Aerodynamic Implications of Aerocapture Systems for Uranus Orbiters

Exploration of the Ice Giants, Uranus in particular, has been indicated as the highest priority new flagship-class mission by the 2022 Planetary Science Decadal Survey. However, due to it’s location in the solar system, extensive travel time and resources are required for a mission to reach Uranus. Aerocapture offers shorter interplanetary transit times and reduced propellant requirements for such a mission when compared to a traditional propulsive-capture orbiter. Considerations for the aerodynamics of an aerocapture system enabling flagship-class science mission to Uranus are presented. The applicability of a low lift-to-drag entry vehicle aeroshell with flight heritage to a new planet and atmosphere is evaluated. A preliminary aerodatabase is formulated from low-fidelity methods and heritage flight mission data to provide initial estimates of trajectory space to be considered for inserting a spacecraft into orbit at Uranus using aerocapture. Computational fluid dynamics calculations in the free molecular, transitional, and continuum regimes using Direct Simulation Monte Carlo and Navier-Stokes solutions are used to assess the validity of this preliminary aerodatabase. The considered entry vehicle is found to varying levels of agreement with work done by previous flight missions when evaluated for flight in Uranus’ atmosphere. Implications for the aerodynamics of this vehicle as applied in an aerocapture system in flight at Uranus as found by the current work are discussed.

Eli R. Shellabarger↗

NASA NTRSDate not supplied

Aerodynamic Implications of Aerocapture Systems for Uranus Orbiters

Exploration of the Ice Giants, Uranus in particular, has been indicated as the highest priority new flagship-class mission by the 2022 Planetary Science Decadal Survey. However, due to it's location in the solar system, extensive travel time and resources are required for a mission to reach Uranus. Aerocapture offers shorter interplanetary transit times and reduced propellant requirements for such a mission when compared to a traditional propulsive-capture orbiter. Considerations for the aerodynamics of an aerocapture system enabling flagship-class science mission to Uranus are presented. The applicability of a low lift-to-drag entry vehicle aeroshell with flight heritage to a new planet and atmosphere is evaluated. A preliminary aerodatabase is formulated from low-fidelity methods and heritage flight mission data to provide initial estimates of trajectory space to be considered for inserting a spacecraft into orbit at Uranus using aerocapture. Computational fluid dynamics calculations in the free molecular, transitional, and continuum regimes using Direct Simulation Monte Carlo and Navier-Stokes solutions are used to assess the validity of this preliminary aerodatabase. The considered entry vehicle is found to varying levels of agreement with work done by previous flight missions when evaluated for flight in Uranus' atmosphere. Implications for the aerodynamics of this vehicle as applied in an aerocapture system in flight at Uranus as found by the current work are discussed.

Uranus↗

NASA NTRS2006

Ground Testing A 20-Meter Inflation Deployed Solar Sail

Solar sails have been proposed for a variety of future space exploration missions and provide a cost effective source of propellantless propulsion. Solar sails span very large areas to capture and reflect photons from the Sun and are propelled through space by the transfer of momentum from the photons to the solar sail. The thrust of a solar sail, though small, is continuous and acts for the life of the mission without the need for propellant. Recent advances in materials and ultra-low mass gossamer structures have enabled a host of useful space exploration missions utilizing solar sail propulsion. The team of L Garde, NASA Jet Propulsion Laboratory (JPL), Ball Aerospace, and NASA Langley Research Center, under the direction of the NASA In-Space Propulsion Office (ISP), has been developing a scalable solar sail configuration to address NASA s future space propulsion needs. The 100-m baseline solar sail concept was optimized around the one astronomical unit (AU) Geostorm mission, and features a Mylar sail membrane with a striped-net sail suspension architecture with inflation-deployed sail support beams consisting of inflatable sub-Tg (glass transition temperature) rigidizable semi-monocoque booms and a spreader system. The solar sail has vanes integrated onto the tips of the support beams to provide full 3-axis control of the solar sail. This same structural concept can be scaled to meet the requirements of a number of other NASA missions. Static and dynamic testing of a 20m scaled version of this solar sail concept have been completed in the Space Power Facility (SPF) at the NASA Glenn Plum Brook facility under vacuum and thermal conditions simulating the operation of a solar sail in space. This paper details the lessons learned from these and other similar ground based tests of gossamer structures during the three year solar sail project.

Mann, Troy↗

NASA NTRS1989

Knowledge representation in space flight operations

In space flight operations rapid understanding of the state of the space vehicle is essential. Representation of knowledge depicting space vehicle status in a dynamic environment presents a difficult challenge. The NASA Jet Propulsion Laboratory has pursued areas of technology associated with the advancement of spacecraft operations environment. This has led to the development of several advanced mission systems which incorporate enhanced graphics capabilities. These systems include: (1) Spacecraft Health Automated Reasoning Prototype (SHARP); (2) Spacecraft Monitoring Environment (SME); (3) Electrical Power Data Monitor (EPDM); (4) Generic Payload Operations Control Center (GPOCC); and (5) Telemetry System Monitor Prototype (TSM). Knowledge representation in these systems provides a direct representation of the intrinsic images associated with the instrument and satellite telemetry and telecommunications systems. The man-machine interface includes easily interpreted contextual graphic displays. These interactive video displays contain multiple display screens with pop-up windows and intelligent, high resolution graphics linked through context and mouse-sensitive icons and text.

Busse, Carl↗

NASA NTRS1997

High-Flux, High-Temperature Thermal Vacuum Qualification Testing of a Solar Receiver Aperture Shield

As part of the International Space Station (ISS) Phase 1 program, NASA Lewis Research Center (LERC) and the Russian Space Agency (RSA) teamed together to design, build and flight test the world's first orbital Solar Dynamic Power System (SDPS) on the Russian space station Mir. The Solar Dynamic Flight Demonstration (SDFD) program was to operate a nominal 2 kWe SDPS on Mir for a period up to 1-year starting in late 1997. Unfortunately, the SDFD mission was demanifested from the ISS phase 1 shuttle program in early 1996. However, substantial flight hardware and prototypical flight hardware was built including a heat receiver and aperture shield. The aperture shield comprises the front face of the cylindrical cavity heat receiver and is located at the focal plane of the solar concentrator. It is constructed of a stainless steel plate with a 1-m outside diameter, a 0.24-m inside diameter and covered with high-temperature, refractory metal Multi-Foil Insulation (MFI). The aperture shield must minimize heat loss from the receiver cavity, provide a stiff, high strength structure to accommodate shuttle launch loads and protect receiver structures from highly concentrated solar fluxes during concentrator off-pointing events. To satisfy Mir operational safety protocols, the aperture shield was required to accommodate direct impingement of the intensely concentrated solar image for a 1-hour period. To verify thermal-structural durability under the anticipated high-flux, high-temperature loading, an aperture shield test article was constructed and underwent a series of two tests in a large thermal vacuum chamber configured with a reflective, point-focus solar concentrator and a solar simulator. The test article was positioned near the focal plane and exposed to concentrated solar flux for a period of 1-hour. In the first test, a near equilibrium temperature of 1862 K was attained in the center of the shield hot spot. In the second test, with increased incident flux, a near equilibrium temperature of 2072 K was achieved. The aperture shield sustained no visible damage as a result of the exposures. This paper describes the aperture shield thermal-vacuum qualification test program including the test article, test facility, procedures, data collection, test success criteria, results and conclusions.

Kerslake, Thomas W.↗

NASA NTRS2015

Assessing the Effect of Spaceflight on the Propensity for Astronauts to Develop Disk Herniation

A previous study [1] reported the instantaneous risk of developing a Herniated Nucleus Pulosus (HNP) was higher in astronauts who had flown at least one mission, as compared with those in the corps who had not yet flown. However, the study only analyzed time to HNP after the first mission (if any) and did not account for the possible effects of multiple missions. While many HNP's occurred well into astronauts' careers or in some cases years after retirement, the higher incidence of HNPs relatively soon after completion of space missions appears to indicate that spaceflight may lead to an increased risk of HNP. The purpose of this study was to support the Human System Risk Boards assessment of back pain, assess the risk of injury due to dynamic loads, and update the dataset analyzed which contained data through December 31, 2006.

Feiveson, Alan H.↗

NASA NTRS2014

Assessing the Effect of Spaceflight on the Propensity for Astronauts to Develop Disk Herniation

BACKGROUND: A previous study [1] reported that the instantaneous risk of developing a Herniated Nucleus Pulposus (HNP) was higher in astronauts who had flown at least one mission, as compared with those in the corps who had not yet flown. However, the study only analyzed time to HNP after the first mission (if any) and did not account for the possible effects of multiple missions. While many HNP's occurred well into astronauts' careers or in some cases years after retirement, the higher incidence of HNPs relatively soon after completion of space missions appears to indicate that spaceflight may lead to an increased risk of HNP. The purpose of this study was to support the Human System Risk Board assessment of back pain, evaluate the risk of injury due to dynamic loads, and update the previous dataset which contained events up to December 31, 2006. METHODS: Data was queried from the electronic medical record and provided by the Lifetime Surveillance of Astronaut Health. The data included all 330 United States astronauts from 1959 through February 2014. Cases were confirmed by Magnetic Resonance Imaging, Computerized Tomography, Myelography, operative findings, or through clinical confirmation with a neurologist or neurosurgeon. In this analysis, astronauts who had an HNP at selection into the corps or had an HNP diagnosis prior to their first flight were excluded. The statistical challenges in using the available data to separate effects of spaceflight from those associated with general astronaut training and lifestyle on propensity to develop HNPs are many. The primary outcome is reported date of first HNP (if any), which at best is only an approximation to the actual time of occurrence. To properly analyze this data with a survival analysis model, one must also know the "exposure" time - i.e. how long each astronaut has been at risk for developing an HNP. If an HNP is reported soon after a mission, is it mission caused or general? If the former, exposure time should be counted from the time of landing (assuming the risk of HNP occurring during a mission is zero). If the latter, exposure time should be counted from the time of selection; however we can't directly know which one to use. In our analysis we take both of these possibilities into account with a competing risks model, wherein two distinct stochastic processes are going on: TG = time to HNP (general) and TS = time to HNP (spaceflight). Under this type of model, whichever of these occurs first is what we observe; in other words we don't observe TG or TS, only min(TG, TS). Here, we parameterized the model in terms of separate Weibull hazard functions for each process and estimated all parameters using maximum likelihood. In addition, we allowed for a "cured fraction" - i.e. the possibility that some astronauts may never develop an HNP. RESULTS: Results will include a depiction of the competing hazard functions as well as a probability curve for the relative likelihood that an HNP reported at a given time after a mission is actually mission caused. Other factors, such as dwell time in microgravity and vehicle landing environment will be explored. An overall assessment as to whether spaceflight truly exacerbates HNP risk will be made.

Feiveson, A. H.↗

NASA NTRSDate not supplied

An in-Time Aviation Safety Management System Concept of Operations and Modernization of the National Airspace System

The National Airspace System (NAS) is growing in complexity of aircraft, missions, and operations. In response, many organizations have published papers and concepts of operations (ConOps) for new and enhanced safety systems. The National Academies’ vision for an In-time Aviation Safety Management System (IASMS) is integral to Federal Aviation Administration (FAA) modernization efforts. The National Aeronautics and Space Administration (NASA) System-Wide Safety (SWS) project is conducting safety research, exploring solutions, and defining the safety needs of future missions, such as Advanced Air Mobility (AAM) and autonomous aircraft operating in a more connected, flexible, and dynamic airspace. IASMS enables and provides a path for bringing FAA’s operational vision to fruition through increasingly automated safety systems that integrate services, functions, and capabilities (SFCs). These SFCs provide the necessary responsiveness to monitor, assess, and mitigate known hazards and emergent risks. This paper describes how safety in today’s air transportation system will need to evolve, identifies key points regarding in-time safety, and explores the criticality of IASMS in the future NAS.

IASMS↗

NASA NTRSDate not supplied

An In-time Aviation Safety Management System Concept of Operations and Modernization of the National Airspace System

Airspace↗

NASA NTRS1998

Dynamics of Liquids in Edges and Corners (DYLCO): IML-2 Experiment for the BDPU

Knowledge of the behavior of fluids possessing free surfaces is important to many fluid systems, particularly in space, where the normally subtle effects of surface wettability play a more dramatic and often surprising role. DYLCO for the IML-2 mission was proposed as a simple experiment to probe the particular behavior of capillary surfaces in containers of irregular cross section. Temperature control was utilized to vary the fluid-solid contact angle, a questionable thermodynamic parameter of the system, small changes in which can dramatically influence the configuration, stability, and flow of a capillary surface. Container shapes, test fluid, and temperature ranges were selected for observing both local changes in interface curvature as well as a global change in fluid orientation due to a critical wetting phenomenon. The experiment hardware performed beyond what was expected and fluid interfaces could be readily digitized post flight to show the dependence of the interface curvature on temperature. For each of the containers tested surfaces were observed which did not satisfy the classic equations for the prediction of interface shape with constant contact angle boundary condition. This is explained by the presence of contact angle hysteresis arising from expansion and contraction of the liquid during the heating and cooling steps of the test procedure. More importantly, surfaces exceeding the critical surface curvature required for critical wetting were measured, yet no wetting was observed. These findings are indeed curious and pose key questions concerning the role of hysteresis for this critical wetting phenomena. The stability of such surfaces was determined numerically and it is shown that stability is enhance (reduced) when a surface is in its 'advancing' ('receding') state, The analysis shows complete instability as the critical wetting condition is reached. The case of ideal dynamic wetting is addressed analytically in detail with results of significant flow characteristics presented in closed form. The solutions indicate a square root of T dependence of the capillary 'rise' rate which is corroborated by drop tower tests. The analysis clearly shows that infinite time is necessary for surfaces to reorient at the critical wetting transition.

Langbein, D.↗

NASA NTRS2008

Developments in Test Facility and Data Networking for the Altitude Test Stand at the John C. Stennis Space Center: A General Overview

NASA/SSC's Mission in Rocket Propulsion Testing Is to Acquire Test Performance Data for Verification, Validation and Qualification of Propulsion Systems Hardware: Accurate, Reliable, Comprehensive, and Timely. Data Acquisition in a Rocket Propulsion Test Environment Is Challenging: a) Severe Temporal Transient Dynamic Environments; b) Large Thermal Gradients; c) Vacuum to high pressure regimes. A-3 Test Stand Development is equally challenging with respect to accommodating vacuum environment, operation of a CSG system, and a large quantity of data system and control channels to determine proper engine performance as well as Test Stand operation. SSC is currently in the process of providing modernized DAS, Control Systems, Video, and network systems for the A-3 Test Stand to overcome these challenges.

Hebert, Phillip W.↗

NASA NTRS2018

Spacecraft Micro-Vibration: A Survey of Problems, Experiences, Potential Solutions, and Some Lessons Learned

Predicting, managing, controlling, and testing spacecraft microvibrations due to on-board internal disturbance sources is a formidable multi-disciplinary systems engineering challenge, especially for those observatories hosting extremely sensitive optical sensor payloads with stringent requirements on allowable line-of-sight jitter. In this paper some specific spacecraft micro-vibration engineering challenges will be introduced and described. Technical background context is provided with the inclusion of several illustrative examples of NASA and European Space Agency missions (both past and present) where dynamic interactions have to be addressed and which have demanding payload instrument line-of-sight jitter requirements. A general modeling, analysis, simulation, and test approach to address and solve the overall problem of spacecraft micro-vibrations is outlined. Recommended rules of thumb are presented to provide guidance for analysts on where to initiate and how to approach a new spacecraft micro-vibration design problem. A set of experience-based spacecraft micro-vibration lessons learned are also presented in the hope they can be leveraged on new system development projects to help overcome unfamiliarity with previously identified microvibration technical pitfalls and challenges.

Dennehy, Cornelius↗

NASA NTRS2014

Challenges in Measuring External Currents Driven by the Solar Wind-Magnetosphere Interaction

In studying the Earth's geomagnetism, it has always been a challenge to separate magnetic fields from external currents originating from the ionosphere and magnetosphere. While the internal magnetic field changes very slowly in time scales of years and more, the ionospheric and magnetospheric current systems driven by the solar wind -magnetosphere interaction are very dynamic. They are intimately controlled by the ionospheric electrodynamics and ionospheremagnetosphere coupling. Single spacecraft observations are not able to separate their spatial and temporal variations, and thus to accurately describe their configurations. To characterize and understand the external currents, satellite observations require both good spatial and temporal resolutions. This paper reviews our observations of the external currents from two recent LEO satellite missions: Space Technology 5 (ST-5), NASA's first three-satellite constellation mission in LEO polar orbit, and Communications/Navigation Outage Forecasting System (C/NOFS), an equatorial satellite developed by US Air Force Research Laboratory. We present recommendations for future geomagnetism missions based on these observations.

WIND-MAGNETOSPHERE↗

NASA NTRS1975

Worst error performance of continuous Kalman filters

The worst error performance of estimation filters is investigated for continuous systems in this paper. The pathological performance study, without assuming any dynamical model such as Markov processes for perturbations, except for its bounded amplitude, will give practical and dependable criteria in establishing the navigation and maneuver strategy in deep space missions.

Nishimura, T.↗

NASA NTRS1976

Astrodynamics 1975; Conference, Nassau, Bahamas, July 28-30, 1975, Technical Papers

Articles are grouped under four headings: (1) dynamics and control of satellites; (2) satellite mission analysis; (3) Aeros-B and Symphonie satellite engineering problems; (4) optimization and control techniques applied to solar space heating and cooling of buildings. Topics covered include: communications and earth survey satellite systems, a system of two counter-orbiting satellites measuring GRT-predicted nodal drag, statistical mechanics studies of the spatial density function of orbiting space junk, attitude control of satellites, nutation dampers, low thrust inertial guidance and ascent inertial guidance, a shuttle-launched multi-comet intercept mission, preflight and in-flight analysis of the Atmosphere Explorer (AE-C) satellite, and launch-encounter strategy for the Mariner 1977 Jupiter-Saturn mission. Individual items are announced in this issue.

Powers, W. F.↗

NASA NTRS1990

Inertial coordinate system on the sky; Proceedings of the 141st Symposium of the IAU, Leningrad, USSR, Oct. 17-21, 1989

The present conference on the inertial coordinate system on the sky encompasses the legacy of Pulkovo for inertial systems and reference frames, Pulkovo today, concepts and models, and the realization and comparison of reference frames. Specific issues addressed include the longest geodetic arc, the origin of celestial coordinates, the photographic vertical catalog, a program for determining the connection between radio and optical reference frames, positional observations of triple stars for the HST mission, and a general relativistic description of the celestial reference system. Also addressed are proposals for an improved nutation formula, dynamical reference frames in the planetary and earth-moon systems, the construction of a frame of homogeneous accuracy based on space observations, astrometric interferometry, and the definition and stability of local inertial reference frames.

Lieske, Jay H.↗