Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Source release”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Sorption-based atmospheric water harvesting device

A water-harvesting system can operate with a material that can take up and release water with minimum energy requirements and powered by low-grade energy sources, such as sunlight, in order to potentially allow its deployment into households, especially those located in sunny regions. A water-harvesting method and system can include vapor adsorption using a porous metal-organic framework. In certain embodiments, the porous metal-organic framework can include metal-organic framework in ambient air with low relative humidity, typical of the levels found in most dry regions of the world.

42 ENGINEERING↗
DOE OSTI2022

Application of Constellation's best estimate alternate source term methodology

Safety analyses for a nuclear power plants need to consider postulated accidents that results in a risk of accidental release of radiation. The regulations require plant specific safety analysis reports to include an evaluation of the requirements of 10CFR50.67. Such a safety analysis report mandates limits such that calculated radiological consequences at certain locations do not exceed established limits in 10CFR50.67 following a postulated release of radioactivity. Analyses should demonstrate, with reasonable assurance, that these prescribed limits are complied with. Conventional methodologies utilize conservative approaches to address lack of uncertainty quantification in the utilized approaches, methods, and/or inputs. These built-in excess conservatisms often result in with compounding effects and hence overly conservative results in the estimated radiological consequences, which leads to inaccurate margin evaluation for operation and accident mitigation. Therefore, evaluating accurate dose consequences is needed for both operational and safety reasons. This paper illustrates the use of the best estimate source term (BEAST) methodology to the case of the loss of coolant accident (LOCA) dose analysis.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2026

Triso Analysis Tool For Predictive Source Terms

Source term modeling for TRi-structural ISOtropic (TRISO) fuel has been performed for previous reactor designs, but few are available in the open literature. Thus, there is a need to develop a simple, versatile, and mechanistic model of fission product release and transport in gas reactor cores that can be applied to a variety of reactors through user inputs and reactor-specific radionuclide inventories. To meet this need, the TRISO Analysis Tool for Predictive Source terms (TRISO-ATOPS) was developed. This model calculates the release of the key safety-important fission products by diffusion through the kernel, silicon carbide and graphite based on fuel and graphite temperatures in the reactor under normal operation. These releases from the fuel enter the coolant where they can plate-out on cooler surfaces. A clean-up model is included for designs with a coolant purification system for removing fission gases. This initial distribution of fission products in the reactor serves as an initial condition for potential releases under postulated accident conditions. From this initial condition, the model calculates the fission product release for any transient temperature profile, and the fission product releases can then be used to assess radiological dose to the workers and the public using conventional radiological dose tools. Data on the diffusion of fission products is based on historic German TRISO experiments and the more current Department of Energy Advanced Gas Reactor TRISO fuel development program. The example cases in this work demonstrate the flexibility of the model

Stoyer, Benjamin [Idaho National Laboratory (INL),↗
DOE OSTI2022

The channel-source hypothesis: Empirical evidence for in-channel sourcing of dissolved organic carbon to explain hysteresis in a headwater mountain stream

Catchment hydrologists have long puzzled over the question: How can catchments rapidly generate storm flows and pulses of solutes in response to storm events? Conceptual models viewing catchments as composed of discrete source areas generating flow at unique time scales and with unique chemical characteristics have been used to explain the observed changes in flow and water chemistry. Surprisingly, those conceptual models usually do not treat the stream channel as one of the potential source areas. We propose the channel-source hypothesis in which the stream itself should be considered as a potential source with the same rigour as other contributing areas. We pose this in the spirit of the scientific use of the word: a hypothesis is not a proven idea but rather a provisional supposition serving as the basis for further study. We suggest that the channel should be considered as a potential source for dissolved organic carbon (DOC). Channels store substantial amounts of organic matter, and stream ecologists have long studied stream carbon cycling. From those studies, we know that leaching and decomposition can generate DOC from particulate organic carbon (POC). Further, POC is stored in channel ‘dead-zones’—regions of low flow velocity - that can be activated as flow velocity increases, thus releasing accumulated DOC during storms. All catchments are different; there is no reason to assume that channel sources are always important, in every catchment, in every storm. Thus, the channel-source hypothesis does not replace existing conceptual models. Instead, it adds another potential mechanism that may explain DOC dynamics observed in streams. The channel-source hypothesis has substantial implications for catchment studies examining sources of DOC in stream water or using DOC as a tracer to determine the locations of, and proportional contributions of, different source areas for streamflow generation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

The Dark Energy Survey Data Release 2

In this work, we present the second public data release of the Dark Energy Survey, DES DR2, based on optical/near-infrared imaging by the Dark Energy Camera mounted on the 4 m Blanco telescope at Cerro Tololo Inter-American Observatory in Chile. DES DR2 consists of reduced single-epoch and coadded images, a source catalog derived from coadded images, and associated data products assembled from 6 yr of DES science operations. This release includes data from the DES wide-area survey covering ~5000 deg 2 of the southern Galactic cap in five broad photometric bands, grizY. DES DR2 has a median delivered point-spread function FWHM of g = 1.11'', r = 0.95'', i = 0.88'', z = 0.83'', and Y = 0farcs90, photometric uniformity with a standard deviation of < 3 mmag with respect to Gaia DR2 G band, a photometric accuracy of ~11 mmag, and a median internal astrometric precision of ~27 mas. The median coadded catalog depth for a 1farcs95 diameter aperture at signal-to-noise ratio = 10 is g = 24.7, r = 24.4, i = 23.8, z = 23.1, and Y = 21.7 mag. DES DR2 includes ~691 million distinct astronomical objects detected in 10,169 coadded image tiles of size 0.534 deg2 produced from 76,217 single-epoch images. After a basic quality selection, benchmark galaxy and stellar samples contain 543 million and 145 million objects, respectively. These data are accessible through several interfaces, including interactive image visualization tools, web-based query clients, image cutout servers, and Jupyter notebooks. DES DR2 constitutes the largest photometric data set to date at the achieved depth and photometric precision.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Test Results for Checking Reliability of Selected ENDF/B-VIII.0 Evaluated Uncertainties

This report summarizes error messages obtained from counter-checking whether 1 H, 9 Be, 12 C, 27 Al, 235,238 U and 238–242 Pu relative uncertainties of ENDF/B-VIII.0 are realistic. Large parts of this report were generated automatically by the code CovVal. This code allows to test the reliability of relative uncertainties of any isotope. It gives generic error and warning messages if evaluated relative uncertainties of a particular reaction are likely under- or over-estimated. In addition to these error and warning messages, I added comments whether the flagged uncertainties are truly under- or overestimated. I call out these uncertainties that should be further investigated and corrected by an evaluator for an upcoming release of ENDF/B-VIII.1.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2024

Flaring Stars in a Non-targeted mm-wave Survey with SPT-3G

We present a flare star catalog from four years of non-targeted millimeter-wave survey data from the South Pole Telescope (SPT). The data were taken with the SPT-3G camera and cover a 1500-square-degree region of the sky from $20^{h}40^{m}0^{s}$ to $3^{h}20^{m}0^{s}$ in right ascension and $-42^{\circ}$ to $-70^{\circ}$ in declination. This region was observed on a nearly daily cadence from 2019-2022 and chosen to avoid the plane of the galaxy. A short-duration transient search of this survey yields 111 flaring events from 66 stars, increasing the number of both flaring events and detected flare stars by an order of magnitude from the previous SPT-3G data release. We provide cross-matching to Gaia DR3, as well as matches to X-ray point sources found in the second ROSAT all-sky survey. We have detected flaring stars across the main sequence, from early-type A stars to M dwarfs, as well as a large population of evolved stars. These stars are mostly nearby, spanning 10 to 1000 parsecs in distance. Most of the flare spectral indices are constant or gently rising as a function of frequency at 95/150/220 GHz. The timescale of these events can range from minutes to hours, and the peak $\nu L_{\nu}$ luminosities range from $10^{27}$ to $10^{31}$ erg s$^{-1}$ in the SPT-3G frequency bands.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Revisiting AGN as the Source of IceCube's Diffuse Neutrino Flux

The origin of the astrophysical neutrino flux reported by the IceCube Collaboration remains an open question. In this study, we use three years of publicly available IceCube data to search for evidence of neutrino emission from the blazars and non-blazar Active Galactic Nuclei (AGN) contained the Fermi 4LAC catalog. We find no evidence that these sources produce high-energy neutrinos, and conclude that blazars can produce no more than 15% of IceCube's observed flux. The constraint we derive on the contribution from non-blazar AGN, which are less luminous and more numerous than blazars, is significantly less restrictive, and it remains possible that this class of sources could produce the entirety of the diffuse neutrino flux observed by IceCube. We anticipate that it will become possible to definitively test such scenarios as IceCube accumulates and releases more data, and as gamma-ray catalogs of AGN become increasingly complete. We also comment on starburst and other starforming galaxies, and conclude that these sources could contribute substantially to the signal observed by IceCube, in particular at the lowest detected energies.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Bioconversion and quantification of humic substances from low rank coals using indigenous fungal isolates

The major portion of coals around the world belongs to lignitic origin, and burning of these Low Rank Coals (LRCs) not only produces energy, but also release harmful gases into the environment. On the other hand, coal is a mega source of fossilized carbon compounds that can be utilized in diverse range of carbon/organic industries. Biosolubilization is one of the safest and economical way to consume these LRCs for the harvest of humic and fulvic acids for industrial applications. Present studies deal with solubilization of coal samples from five different mines of Punjab, Pakistan by indigenously isolated fungus. From a number of indigenously isolated fungal isolates, an isolate NF-2 was selected based on its solubilization potential on solid Sabouraud medium. The intensity of coal biosolubilization was found maximum for coal sample B-1 (59%) and lowest for sample B-26 (17.2%) with 5% (w/v) pulp density at 28 ± 2°C. Humification index value (A 4 /A 6 ) for biosolubilized products of coal sample B-1 was found 6.18 which was much higher than the A 4 /A 6 value (4.27) of commercially available standard humic acid. Biosolubilized products from coal sample B-1 was found maximum with 8681 mg/L humic acid concentration as determined by standard curve method. FTIR and FE-SEM analyses of sample B-1 treated with NF-2 confirmed the structural break down and solubilization of coal. Molecular identification of fungal isolate NF-2 showed 100% similarity to Aspergillus flavus. Here, this work paves the way to utilize lignitic coals for the environment friendly and low-cost production of humic acids by fungal biosolubilization as an alternate to chemical methods.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Reactive Carbon Capture: Cooperative and Bifunctional Adsorbent-Catalyst Materials and Process Integration for a New Carbon Economy

To say the least, releasing CO 2 into the atmosphere is reaping undue environmental consequences given the ever-present increase in severe global weather events over the past five years. However, it can be argued that–at least in the confines of current technological capabilities–the atmospheric release of CO 2 is somewhat unavoidable given that even shifting toward clean energy sources–such as solar, nuclear, wind, battery, or H 2 power–incurs an initial carbon requirement by way of manufacturing the very production abilities through which “clean” energy is generated. Even years from now, experts agree that energy production will be diversified and–as the global population continues to drive the growth of global energy consumption–thermal power derived from carbon combustion is likely to remain one intrinsic energetic source, of which CO 2 will always be a byproduct. In this context, it is the responsibility of the scientific community to devise improved pathways of carbon management such that (i) the consequences of combustion on the global environment are reduced and (ii) carbon fuels can be leveraged in a sustainable fashion. In this Account, we discuss a pivotal perspective shift on CO 2 emissions derived from a considerable breakthrough in material science from our work on shape engineering of nanoporous adsorbents and catalysts. This account details the development of materials which no longer vilify CO 2 emissions as a valueless combustion byproduct, instead providing a path for them to become a potential feedstock. In more specific terms, this work details the development of structured, cooperative “bifunctional” materials (BFMs) comprised of (i) a high-temperature adsorbent and (ii) a heterogeneous catalyst that enable single-bed CO 2 capture and utilization in oxidative ethane dehydrogenation (ODHE), oxidative propane dehydrogenation (ODHP), and dry methane reforming (DMR) processes. This Account begins with the conceptual development of the BFMs in the powdered state, followed by detailing the first-ever reports of structuring the materials into facile honeycomb contactors by 3D printing. The Account then summarizes the impressive performance of the 3D-printed BFMs, specifically focusing on how their catalysts (metal oxides and perovskites) influence their reactive CO 2 capture performances in ODHE, ODHP, and DMR processes. Such promise of CO 2 -as-fuel offers a glimpse into the future of a diversified energy economy, in which CO 2 /fuel looping can play an important role. A major factor in achieving this future is, of course, developing an appropriately active catalyst; an account of whose first breakthroughs in material science are detailed herein.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

High Supersaturation in the Wake of Falling Hydrometeors: Implications for Cloud Invigoration and Ice Nucleation

Aerosol particles, cloud droplets, and ice crystals, coupled through the supersaturation field, play an important role in the buoyancy and life cycle of convective clouds. This letter reports laboratory observations of copious cloud droplets and ice crystals formed in the wake of a warm, falling water drop, which is a laboratory surrogate for a relatively warm hydrometeor in atmospheric clouds, such as a graupel particle in the wet growth regime. Aerosols were activated in the regions of very high supersaturation due to mixing in the wake. A mechanism is explored for attaining very high supersaturations capable of activating significant fractions of the interstitial aerosols within the lifetime of a convective cloud. The latent heat released from the activation of interstitial aerosols and subsequent growth may provide an additional source of buoyancy for cloud invigoration and may lead to larger concentrations of ice crystals.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Full calibration of the tomographic redshift distribution from the HSC PDR3 Shape Catalog with DESI

The calibration of tomographic redshift distributionsis essential for cosmological analysis of weak lensing data.In this work, we calibrate all four tomographic bins of the Hyper Suprime Camera (HSC) weak lensing catalog with the Dark Energy Spectroscopic Instrument (DESI) Data Release 1 and 2 using the clustering redshifts technique. We include z > 1.2 redshift sources such as emission line galaxies (ELG) and quasars (QSO) sources in our calibration, which were not available in the previous HSC calibration (Rau et al. (2022), Mon. Not. Roy. Astron. Soc. 524 (2023) 5109), allowing a complete calibration of all the redshift bins. We find the first tomographic bin exhibits a small shift towards low redshifts. The second bin is in good agreement with the photometric calibration, while third and fourth bin exhibit a shift towards higher redshifts. However, these shifts are considerably smaller than the shifts obtained in the HSC Year 3 cosmic shear analyses. We evaluate the impact of galaxy bias and magnification effects from all the samples on the measurements, finding them to be small, and we propose corrections to reduce them further. Specifically, we relax the assumption of linear bias and only assume no redshift evolution of the cross-correlation coefficient, allowing us to leverage smaller clustering scales. We model the redshift distributions with splines and compare our results to previous analyses as well as to other parameterizations found in literature. For the two high-redshift tomographic bins, we find the shifts to higher redshifts with respect to the measurements performed in Rau+2022 to be Δz$_{3}$ =-0.039$^{+0.020}$$_{-0.021}$ and Δz$_{4}$ = -0.048$^{+0.012}$$_{-0.012}$.

Choppin de Janvry, J. [LBL, Berkeley; UC, Berkeley↗
DOE OSTI2020

Data Testing of Polyethylene Thermal Scattering Law with New Thermal Epithermal eXperiments (TEX) Plutonium Baseline Benchmark, PU-MET-MIXED-002

Five plutonium baseline experiments completed in September of 2018 from the Thermal Epithermal eXperiments (TEX) program have been accepted by the International Criticality Safety Benchmark Evaluation Project as PU-MET-MIXED-002 and will be included in the 2020 version of the handbook. The experiments were made up of stacked layers of plutonium Zero Power Physics Reactor (ZPPR) plates moderated by polyethylene (PE, chemical formula C2H4) to varying degrees to create configurations with five different neutron spectra, including one fast configuration, one thermal configuration, and three mixed configurations. Calculations of the benchmark show overprediction of k eff when using the most recent release of the Evaluated Nuclear Data File Version B (ENDF/B) library release (VIII.0) cross sections, particularly when compared to the previous ENDF/B-VII.1 results. One potential source of overprediction was hypothesized to be the new Molecular Dynamics (MD) generated PE Thermal Scattering Law (TSL). The overprediction was shown via calculation to not be caused by the new ENDF/B-VIII.0 thermal scattering law, and in fact the overprediction was mitigated by the new PE TSL.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Fixed-Energy Response-Function Analysis with Multi-Efficiency (FRAM) Software, Version 6

Researchers at Los Alamos National Laboratory have developed FixedEnergy Response- Function Analysis with Multiple Efficiency (FRAM), a powerful software tool for gamma-ray spectrometry isotopic analysis. This tool leverages Los Alamos expertise in nuclear safeguards, radiation detection systems, and related analysis techniques. A household name in the non-destructive assay community for over two decades, FRAM determines a special nuclear material source's isotopic composition by analyzing gamma-ray spectra. Los Alamos researchers have released the latest version of FRAM that incorporates several updates to the 2013 major release of FRAM, Version 5.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Perspectives on Response to an Abnormal Radiological Event [Slides]

On May 2, 2019, a sealed radioactive source containing cesium-137 was breached at the University of Washington Harborview Research and Training (HRT) Building in downtown Seattle while attempting to recover the source for the National Nuclear Security Administration’s (NNSA’s) Off-site Source Recovery Program (OSRP). The breach of the source resulted in the contamination of personnel, large sections of the building, and a release of material to the local environment.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2026

Gravitational Lenses in UNIONS and Euclid (GLUE). I. A Search for Strong Gravitational Lenses in UNIONS with Subaru, CFHT, and Pan-STARRS Data

We present the results of our pipeline for discovering strong gravitational lenses in the ongoing Ultraviolet Near-Infrared Optical Northern Survey (UNIONS). We successfully train a deep residual convolutional neural network based on CMU-Deeplens architecture, which is designed to detect strong lenses in ground-based imaging surveys. We train on images of real strong lenses and deploy on a sample of 8 million galaxies in areas with full coverage in the g, r, and i filters—the first multiband search for strong gravitational lenses in UNIONS. Following human inspection and grading, we report the discovery of a total of 1346 new strong-lens candidates, of which 146 are Grade A, 199 are Grade B, and 1001 are Grade C. Of these candidates, 283 have lens galaxy spectroscopic redshifts from the Sloan Digital Sky Survey, and an additional 297 have them from the Dark Energy Spectroscopic Instrument Data Release 1. We find 15 of these systems display evidence of both lens and source galaxy redshifts in spectral superposition. We also report the spectroscopic confirmation of seven lensed sources in high-quality systems, all with z > 2.1, using the Keck Near Infrared Echellette Spectrograph and the Gemini Near-Infrared Spectrograph.

Storfer, Christopher J. [University of Hawaii, Hon↗
DOE OSTI2026

Neutrinos and Gamma Rays from Seyfert Galaxies Constrain the Properties of Coronal Turbulence

The TeV neutrino signal observed by IceCube from the active galactic nucleus NGC 1068 can probe its innermost coronal regions. If these neutrinos originate from hadrons accelerated within a magnetized turbulent corona, their intensity and spectrum depend on the turbulent magnetic field strength and turbulence coherence scale. The gamma rays accompanying neutrino production are absorbed in this optically thick environment, in a way that depends sensitively on the size of the corona. By a joint fit of the IceCube and Fermi-LAT observations, we translate the multimessenger signal from NGC 1068 and the tentative signal from NGC 7469 into quantitative constraints on coronal properties. NGC 1068, with a significant TeV neutrino excess, favors a compact, strongly magnetized corona with a large turbulence coherence length relative to the coronal size. NGC 7469, with two ∼100 TeV neutrino events, points instead to a somewhat larger corona with much smaller coherence length and high magnetization, but a very small fraction of energy in nonthermal protons. We obtain the diffuse flux from a population of Seyfert galaxies identical to either NGC 1068 or NGC 7469. Finally, we consider a third scenario, motivated by the spectral break observed in the diffuse neutrino flux at tens of TeV, with coronal properties intermediate between the two point-source-inspired models. To enable detailed comparisons with the IceCube and electromagnetic observations, we release our model predictions in a GitHub repository.

Testagrossa, Federico [Deutsches Elektronen-Synchr↗
DOE OSTI2025

Legacy Survey of Space and Time Data Preview 1: DiaSource searchable catalog

The Legacy Survey of Space and Time Data Preview 1 (DP1) is the first release of data from the NSF-DOE Vera C. Rubin Observatory. It consists of raw and calibrated single-epoch images, co-adds, difference images, detection catalogs, and other derived data products. DP1 is based on 1792 science-grade optical/near-infrared exposures acquired over 48 distinct nights by the Rubin Commissioning Camera, LSSTComCam, on the Simonyi Survey Telescope at the Summit Facility on Cerro Pachón, Chile during the first on-sky commissioning campaign in late 2024. DP1 covers a total of approximately 15 sq. deg. over seven roughly equally-sized non-contiguous fields, each independently observed in six broad photometric bands, ugrizy, spanning a range of stellar densities and latitudes and overlapping with external reference datasets. This dataset is a subset of the full data release consisting of a searchable catalog named DiaSource. This catalog contains measurements for detected sources in difference images. This catalog contains 3,086,404 rows with 87 columns.

79 ASTRONOMY AND ASTROPHYSICS↗