Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Slow light”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Stellar population analysis of MaNGA early-type galaxies: IMF dependence and systematic effects

We study systematics associated with estimating simple stellar population (SSP) parameters – age, metallicity [M/H], α-enhancement [α/Fe], and initial mass function (IMF) shape – and associated M * /L gradients, of elliptical slow rotators (E-SRs), fast rotators (E-FRs), and S0s from stacked spectra of galaxies in the MaNGA survey. These systematics arise from (i) how one normalizes the spectra when stacking; (ii) having to subtract emission before estimating absorption line strengths; (iii) the decision to fit the whole spectrum or just a few absorption lines; (iv) SSP model differences (e.g. isochrones, enrichment, IMF). The MILES+Padova SSP models, fit to the H β , 〈Fe〉, TiO 2SDSS , and [MgFe] Lick indices in the stacks, indicate that out to the half-light radius R e : (a) ages are younger and [α/Fe] values are lower in the central regions but the opposite is true of [M/H]; (b) the IMF is more bottom-heavy in the center, but is close to Kroupa beyond about R e /2; (c) this makes M * /L about 2 × larger in the central regions than beyond R e /2. While the models of Conroy et al. return similar [M/H] and [α/Fe] profiles, the age and (hence) M * /L profiles can differ significantly even for solar abundances and a Kroupa IMF; different responses to non-solar abundances and IMF parametrization further compound these differences. There are clear (model independent) differences between E-SRs, E-FRs, and S0s: younger ages and less enhanced [α/Fe] values suggest that E-FRs and S0s are not SSPs, but relaxing this assumption is unlikely to change their inferred M * /L gradients significantly.

79 ASTRONOMY AND ASTROPHYSICS↗

Giant isotope effect on phonon dispersion and thermal conductivity in methylammonium lead iodide

Lead halide perovskites are strong candidates for high-performance low-cost photovoltaics, light emission, and detection applications. A hot-phonon bottleneck effect significantly extends the cooling time of hot charge carriers, which thermalize through carrier–optic phonon scattering, followed by optic phonon decay to acoustic phonons and finally thermal conduction. To understand these processes, we adjust the lattice dynamics independently of electronics by changing isotopes. We show that doubling the mass of hydrogen in methylammonium lead iodide by replacing protons with deuterons causes a large 20 to 50% softening of the longitudinal acoustic phonons near zone boundaries, reduces thermal conductivity by ~50%, and slows carrier relaxation kinetics. Phonon softening is attributed to anticrossing with the slowed libration modes of the deuterated molecules and the reduced thermal conductivity to lowered phonon velocities. Our results reveal how tuning the organic molecule dynamics enables control of phonons important to thermal conductivity and the hot-phonon bottleneck.

36 MATERIALS SCIENCE↗

Plasmon Dynamics Driven by Aggregation of Tris(2,2′-bipyridine)ruthenium(II)-Functionalized Gold Nanoparticles Probed by XANES and Transient Absorption Spectroscopy

Energy conversion dynamics is critical for advancing next-generation photovoltaics, optoelectronics, and light-harvesting technologies. Noble metal plasmonic nanoparticles play a pivotal role as nanoscale electromagnetic confinement structures, driving photon-induced chemical reactions. In this study, we explore the effects of [Ru(bpy) 3 ] 2+ functionalization and aggregation on citrate-capped gold nanoparticles (AuNPs) of 40 and 100 nm diameters, focusing on molecule-plasmon interactions and their influence on electronic and energy dissipation properties. X-ray absorption near-edge spectroscopy (XANES) revealed that [Ru(bpy) 3 ] 2+ functionalization induces controlled aggregation without altering the oxidation state of gold. A more pronounced white-line intensity is observed in 40 nm AuNPs, consistent with greater s–p–d hybridization and a higher density of surface states, likely influenced by both nanoparticle size and aggregation. Transient absorption (TA) spectroscopy highlights faster electron–phonon relaxation dynamics in aggregated 40 nm nanoparticles, which is attributed to increased electron delocalization and more efficient coupling to the phonon bath. In contrast, 100 nm nanoparticles exhibit minimal changes due to a lower degree of aggregation. Interestingly, we observe that enhanced electron–phonon coupling in aggregated nanoparticles coincides with a slowing of electron–electron scattering. These observations suggest a competitive interplay between the two relaxation pathways, where enhanced energy transfer to the lattice in aggregated systems can suppress electronic thermalization. In conclusion, these findings underscore the critical role of nanoparticle size, aggregation, and molecule–surface interactions in modulating plasmonic dynamics and excited-state lifetimes and further provide valuable insights into designing tailored plasmonic systems with transformative potential for sensing, catalysis, and energy conversion.

36 MATERIALS SCIENCE↗

Solvent effects on the heterogeneous growth of TiO 2 nanostructure arrays by solvothermal synthesis

One-dimensional titanium dioxide (TiO 2 ) nanostructure arrays (nanoarrays) are important metal oxide nanomaterials that can be synthesized via facile solvothermal methods. The properties of the organic solvents can impose significant effects on the microstructures and properties of the final products. However, the discussions were limited to the homogeneously nucleated TiO 2 nanomaterials in free-standing powder form, while the solvent effects are less understood during the heterogeneous growth of TiO 2 nanoarrays on a substrate surface. In this work, six organic compounds, namely 2-butanone, n-decane, n-hexane, toluene, ethylene glycol and ethanol, were selected as the solvents for the solvothermal synthesis of TiO 2 nanoarrays on the cordierite monolithic substrates. Special attentions are paid to the morphology, crystallinity, specific surface area, and porosity of the samples. The heterogeneous growth of TiO 2 nanoarrays on substrate surfaces is found to favor the solvents with moderate dielectric constants, which can be partially dissolved in the aqueous solution and modulate the reaction rate during the solvothermal synthesis. Organic solvents with low dielectric constants may result in a complete separation between the precursors and aqueous solution, and therefore slow down the overall reaction, causing the insufficient growth of the nanoarrays. The TiO 2 nanoarrays are obtained with optimum morphology from the combination of 2-butanone and titanium (IV) butoxide as solvent and precusor, respectively, with a high specific surface area up to 56 m 2 /g including cordierite substrate given a micron thickness. When loaded with Pt catalyst, the TiO 2 nanoarray-based monolithic catalysts show excellent low-temperature catalytic activity and hydrothermal stability for the CO and hydrocarbon oxidation under the simulated exhausted conditions. This article shall shed light on a better understanding of the growth mechanism and rational design of TiO 2 nanoarrays for high-performance catalytic converters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimization of InGaN quantum well interfaces for fast interwell carrier transport and low nonradiative recombination

Efficient high-power operation of light emitting diodes based on InGaN quantum wells (QWs) requires rapid interwell hole transport and low nonradiative recombination. The transport rate can be increased by replacing GaN barriers with that of InGaN. Introduction of InGaN barriers, however, increases the rate of the nonradiative recombination. In this work, we have attempted to reduce the negative impact of the nonradiative recombination by introducing thin GaN or AlGaN interlayers at the QW/barrier interfaces. The interlayers, indeed, reduce the nonradiative recombination rate and increase the internal quantum efficiency by about 10%. Here, the interlayers do not substantially slow down the interwell hole transport; for 0.5 nm Al 0.10 Ga 0.90 N interlayers the transport rate has even been found to increase. Another positive feature of the interlayers is narrowing of the QW PL linewidth, which is attributed to smoother QW interfaces and reduced fluctuations of the QW width.

carrier transport↗

Non-equilibrium states and interactions in the topological insulator and topological crystalline insulator phases of NaCd4As3

Topological materials are of great interest because they can support metallic edge or surface states that are robust against perturbations, with the potential for technological applications. Here, we experimentally explore the light-induced non-equilibrium properties of two distinct topological phases in NaCd4As3: a topological crystalline insulator (TCI) phase and a topological insulator (TI) phase. This material has surface states that are protected by mirror symmetry in the TCI phase at room temperature, while it undergoes a structural phase transition to a TI phase below 200 K. After exciting the TI phase by an ultrafast laser pulse, we observe a leading band edge shift of >150 meV that slowly builds up and reaches a maximum after ∼0.6 ps and that persists for ∼8 ps. The slow rise time of the excited electron population and electron temperature suggests that the electronic and structural orders are strongly coupled in this TI phase. It also suggests that the directly excited electronic states and the probed electronic states are weakly coupled. Both couplings are likely due to a partial relaxation of the lattice distortion, which is known to be associated with the TI phase. In contrast, no distinct excited state is observed in the TCI phase immediately or after photoexcitation, which we attribute to the low density of states and phase space available near the Fermi level. Our results show how ultrafast laser excitation can reveal the distinct excited states and interactions in phase-rich topological materials.

Angle-resolved photoemission spectroscopy↗

Rain measurement results derived from a two polarization S-band radar employing frequency diversity at Wallops Island, Virginia

A dual polarization meteorological radar is described. It operates with a slow switch having a cycle time of 0.7 sec and incorporates a frequency diversity technique to achieve independent sampling over short intervals of time. Rain rate measurements derived from the dual polarization radar and low and high resolution rain gages located at a remote site are compared. Average percent differences in rainfall of < 5% and 16% are demonstrated when comparing the dual polarization radar measurements with the low and high resolution rain gages, respectively. Striking correlations of the rain rates are present during one rain day. The rain measurement cases examined were limited to only light rain rates (<7 mm/hr).

Goldhirsh, J.↗

Burning conditions and transportation pathways determine biomass-burning aerosol properties in the Ascension Island marine boundary layer

African biomass-burning aerosol (BBA) in the southeast Atlantic Ocean (SEA) marine boundary layer (MBL) is an important contributor to Earth’s radiation budget yet its representation remains poorly constrained in regional and global climate models. Data from the Layered Atlantic Smoke Interactions with Clouds (LASIC) field campaign on Ascension Island (-7.95° N, -14.36° E) detail how fire source regions (burning conditions and fuel type), transport pathways, and longer-term chemical processing affect the chemical, microphysical, and optical properties of the BBA in the remote MBL between June and September of 2017. Ten individual plume events characterize the seasonal evolution of BBA characteristics. Inefficient burning conditions, determined by the mass ratio of refractory black carbon to above-background carbon monoxide (rBC:ΔCO), enhance organic- and sulfate-rich aerosol concentrations in June–July. In contrast, the heart of the burning season exhibited higher rBC:ΔCO values indicative of efficient burning conditions, correlating with more rBC-enriched BBA. Toward the end of the burning season, a mix of burning conditions results in increased variation of the BBA properties. The BBA transit to Ascension Island was predominantly through slow-moving pathways in the MBL and lower free troposphere (FT), facilitating prolonged chemical transformations through heterogeneous and aqueous phase processes. Heterogeneous oxidation can persist for up to 10 days, resulting in a considerable decrease in organic aerosol (OA) mass. OA to rBC mass ratios (OA:rBC) in the MBL between 2 and 5 contrast to higher values of 5 to 15 observed in the nearby FT. Conversely, early-season aqueous-phase processes primarily contributed to aerosol oxidation and some aerosol production, but not appreciable aerosol removal. These two chemical processes yield more light-absorbing BBA in the MBL than in the FT and explain the notably low scattering albedo at 530 nm (SSA 530 ) values (< 0.80) at Ascension Island. This study establishes a robust correlation between SSA 530 and OA:rBC across both MBL and FT, underscoring the dependency of optical properties on chemical composition. These findings highlight how the interplay between chemical composition and atmospheric processing can be improved in global and regional climate models. Questions remain on the mixing of aerosols with different pathway histories, and on what accounts for the doubling of the mass absorption coefficient in the boundary layer.

54 ENVIRONMENTAL SCIENCES↗

A silicone column for GC analysis of polar and nonpolar chemicals

The investigation of the Saturnian System is being proposed jointly by NASA and the European Space Agency (ESA). The mission is scheduled for a launch in 1996. The mission provides an opportunity for close observation and exploration of Saturn's atmosphere, the complex Saturnian System of satellites and rings, Titan (Saturn's planet-sized moon), and Saturn's magnetosphere. The mission gives special attention to Titan which is blanketed by a thick, opaque atmosphere. An atmospheric probe will be deposited into the Titan Atmosphere for in situ measurement during a slow, three hour descent to the surface. The results from this analysis may provide the information which is important to the research of chemical evolution, and the origin of life. An analytical system was developed as a part of the Titan Aerosol Gas Experiment (TAGEX), a proposed experiment for the Cassini Mission. This system will use two highly sensitive detectors, the Metastable Ionization Detector (MID) and the Ion Mobility Spectrometer (IMS). Unfortunately, when commercial columns are utilized with these highly sensitive detectors, volatile components continuously bleed from the column and interfere with the detector. In addition, light columns must be able to separate polar and nonpolar organic chemicals within 10-15 minutes under isothermal conditions for the Titan Mission. Therefore, a highly crosslinked silicone polymeric packed column was developed which is able to efficiently separate amines, alcohols, and hydrocarbons with retention times less that 15 minutes at 100 C isothermal condition.

Shen, T. C.↗

Aerial Deployment and Inflation System for Mars Helium Balloons

A method is examined for safely deploying and inflating helium balloons for missions at Mars. The key for making it possible to deploy balloons that are light enough to be buoyant in the thin, Martian atmosphere is to mitigate the transient forces on the balloon that might tear it. A fully inflated Mars balloon has a diameter of 10 m, so it must be folded up for the trip to Mars, unfolded upon arrival, and then inflated with helium gas in the atmosphere. Safe entry into the Martian atmosphere requires the use of an aeroshell vehicle, which protects against severe heating and pressure loads associated with the hypersonic entry flight. Drag decelerates the aeroshell to supersonic speeds, then two parachutes deploy to slow the vehicle down to the needed safe speed of 25 to 35 m/s for balloon deployment. The parachute system descent dynamic pressure must be approximately 5 Pa or lower at an altitude of 4 km or more above the surface.

Lachenmeler, Tim↗

Relationship Between Ecosystem Productivity and Photosynthetically Active Radiation for Northern Peatlands

We analyzed the relationship between net ecosystem exchange of carbon dioxide (NEE) and irradiance (as photosynthetic photon flux density or PPFD), using published and unpublished data that have been collected during midgrowing season for carbon balance studies at seven peatlands in North America and Europe, NEE measurements included both eddy-correlation tower and clear, static chamber methods, which gave very similar results. Data were analyzed by site, as aggregated data sets by peatland type (bog, poor fen, rich fen, and all fens) and as a single aggregated data set for all peatlands. In all cases, a fit with a rectangular hyperbola (NEE = alpha PPFD P(sub max)/(alpha PPFD + P(sub max) + R) better described the NEE-PPFD relationship than did a linear fit (NEE = beta PPFD + R). Poor and rich fens generally had similar NEE-PPFD relationships, while bogs had lower respiration rates (R = -2.0 micro mol m(exp -2) s(exp -1) for bogs and -2.7 micro mol m(exp -2) s(exp -1)) for fens) and lower NEE at moderate and high light levels (P(sub max)= 5.2 micro mol m(exp -2) s(exp -1) for bogs and 10.8 micro mol m(exp -2) s(exp -1) for fens). As a single class, northern peatlands had much smaller ecosystem respiration (R = -2.4 micro mol m(exp -2) s(exp -1)) and NEE rates (alpha = 0.020 and P(sub max)= 9.2 micro mol m(exp -2) s(exp -1)) than the upland ecosystems (closed canopy forest, grassland, and cropland). Despite this low productivity, northern peatland soil carbon pools are generally 5-50 times larger than upland ecosystems because of slow rates of decomposition caused by litter quality and anaerobic, cold soils.

Frolking, S. E.↗

The Faint "Heartbeats" of IGR J17091-3624: An Exceptional Black Hole Candidate

We report on the first 180 days of Rossi X-Ray Timing Explorer observations of the outburst of the black hole candidate IGR Jl7091-3624. This source exhibits a broad variety of complex light curve patterns including periods of strong flares alternating with quiet intervals. Similar patterns in the X-ray light curves have been seen in the (up to now) unique black hole system GRS 1915+105. In the context of the variability classes defined by Belloni et al. for GRS 1915+105, we find that JGR J17091-3624 shows the nu, rho, alpha, lambda, Beta, and mu classes as well as quiet periods which resemble the chi class, all occurring at 2-60 keY count rate levels which can be 10-50 times lower than observed in GRS 1915+\05. The so-called rho class "heartbeats" occur as fast as every few seconds and as slow as approx 100 s, tracing a loop in the hardness-intensity diagram which resembles that previously seen in GRS 1915+\05. However, while GRS 1915+105 traverses this loop clockwise, IGR Jl7091-3624 does so in the opposite sense. We briefly discuss our findings in the context of the models proposed for GRS 1915+105 and find that either all models requiring near Eddington luminosities for GRS 1915+105-like variability fail, or IGR Il7091-3624 lies at a distance well in excess of 20 kpc, or it harbors one of the least massive black holes known( <3 solar M).

Altamirano, D.↗

Biochar alters hydraulic conductivity and impacts nutrient leaching in two agricultural soils

Biochar is purported to provide agricultural benefits when added to the soil, through changes in saturated hydraulic conductivity (K sat ) and increased nutrient retention through chemical or physical means. Despite increased interest and investigation, there remains uncertainty regarding the ability of biochar to deliver these agronomic benefits due to differences in biochar feedstock, production method, production temperature, and soil texture. In this project, a suite of experiments was carried out using biochars of diverse feedstocks and production temperatures, in order to determine the biochar parameters which may optimize agricultural benefits. Sorption experiments were performed with seven distinct biochars to determine sorption efficiencies for ammonium and nitrate. Only one biochar effectively retained nitrate, while all biochars bound ammonium. The three biochars with the highest binding capacities (produced from almond shell at 500 and 800 °C (AS500 and AS800) and softwood at 500 °C (SW500)) were chosen for column experiments. Biochars were amended to a sandy loam and a silt loam at 0 % and 2 % (w/w), and K sat was measured. Biochars reduced K sat in both soils by 64 %–80 %, with the exception of AS800, which increased K sat by 98 % in the silt loam. Breakthrough curves for nitrate and ammonium, as well as leachate nutrient concentration, were also measured in the sandy loam columns. All biochars significantly decreased the quantity of ammonium in the leachate, by 22 % to 78 %, and slowed its movement through the soil profile. Ammonium retention was linked to high cation exchange capacity and a high oxygen-to-carbon ratio, indicating that the primary control of ammonium retention in biochar-amended soils is the chemical affinity between biochar surfaces and ammonium. Biochars had little to no effect on the timing of nitrate release, and only SW500 decreased total quantity, by 27 % to 36 %. The ability of biochar to retain nitrate may be linked to high micropore specific surface area, suggesting a physical entrapment rather than a chemical binding. Together, this work sheds new light on the combined chemical and physical means by which biochar may alter soils to impact nutrient leaching and hydraulic conductivity for agricultural production.

54 ENVIRONMENTAL SCIENCES↗

Radio studies of large scale structures of the Sun's corona and transient activity

The use of meter-decimeter wavelength imaging observations for four different kinds of studies of solar coronal activity is discussed. (1) Large scale structure of the upper corona; daily imaging observations permit comparison of radio images with white light images from space and ground observation, generation of synoptic charts similar to white light coronagraph synoptic charts, and comparison of radio brightness enhancements and deficiencies with bright coronal streamers and coronal holes. (2) Relative positions of type III burst sources and coronal streamers as observed by Solwind experiment on the P-78-1 satellite and by the HAO C/P experiment aboard the SMM; infer the paths of type III emitting electrons in dense coronal streamers, and from multifrequency observations derive electron density distributions above active regions near the limb. (3) Non-flare associated type II/type IV bursts associated with coronal streamer disruption events; such type IV sources have a rather slow velocity (approx = to or less than 100 km/s) CMEs. (4) Meter-decimeter microbursts; these are short duration (2-10 sec) weak-type III-like bursts, produced at the fundamental plasma frequency by plasma radiation processes which have important differences from the standard mechanisms used to explain the strong type III bursts.

Kundu, Mukul R.↗

Characteristics of the Time Variable Component of the Coronal Heating Process

The goal of the proposed study was to explore the non-steady nature of the coronal heating processes and its manifestations in the inner corona and interplanetary space by coordinating coronal SOHO observations in white light, ultraviolet, and extreme ultraviolet, with complementary radio occultation measurements during an unprecedented and rare coincidence of a total solar eclipse with the superior conjunction of a planetary spacecraft, Galileo, in February 1998. In addition, radio occultation measurements by the Mars Global Surveyor spacecraft in May 1998 spanned the inner heliosphere observed by coronal SOHO instruments and probing it to within 0.5 R(sub S), above the solar surface. Inferences of physical properties derived from these simultaneous observations were subsequently used in solar wind model computations to yield the range of plasma parameters characteristic of the fast and slow solar wind.

Habbal, Shadia R.↗

Monte Carlo track structure for radiation biology and space applications

Over the past two decades event by event Monte Carlo track structure codes have increasingly been used for biophysical modelling and radiotherapy. Advent of these codes has helped to shed light on many aspects of microdosimetry and mechanism of damage by ionising radiation in the cell. These codes have continuously been modified to include new improved cross sections and computational techniques. This paper provides a summary of input data for ionizations, excitations and elastic scattering cross sections for event by event Monte Carlo track structure simulations for electrons and ions in the form of parametric equations, which makes it easy to reproduce the data. Stopping power and radial distribution of dose are presented for ions and compared with experimental data. A model is described for simulation of full slowing down of proton tracks in water in the range 1 keV to 1 MeV. Modelling and calculations are presented for the response of a TEPC proportional counter irradiated with 5 MeV alpha-particles. Distributions are presented for the wall and wall-less counters. Data shows contribution of indirect effects to the lineal energy distribution for the wall counters responses even at such a low ion energy.

NASA Center JSC↗

Mesoscopic two-point collective dynamics of glass-forming liquids

The collective density–density and hydrostatic pressure–pressure correlations of glass-forming liquids are spatiotemporally mapped out using molecular dynamics simulations. It is shown that the sharp rise of structural relaxation time below the Arrhenius temperature coincides with the emergence of slow, nonhydrodynamic collective dynamics on mesoscopic scales. The observed long-range, nonhydrodynamic mode is independent of wave numbers and closely coupled to the local structural dynamics. Below the Arrhenius temperature, it dominates the slow collective dynamics on length scales immediately beyond the first structural peak in contrast to the well-known behavior at high temperatures. Furthermore, these results highlight a key connection between the qualitative change in mesoscopic two-point collective dynamics and the dynamic crossover phenomenon.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rain measurement results derived from a two-polarization frequency-diversity S-band radar at Wallops Island, Virginia

A dual polarization meteorological radar is described. It operates with a slow switch having a cycle time of 0.7 sec and incorporates a frequency diversity technique to achieve independent sampling over short intervals of time. Rain rate measurements derived from the dual polarization radar and low and high resolution rain gages located at a remote site are compared. Average percent differences in rainfall of less than 5 percent and 16 percent are demonstrated when comparing the dual polarization radar measurements with the low and high resolution rain gages, respectively. Striking correlations of the rain rates are present during one rain day. The rain measurement cases examined were limited to only light rain rates (less than 7 mm/hr).

Goldhirsh, Julius↗