Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Shape”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Adult height, body mass index change, and body shape change in relation to esophageal squamous cell carcinoma risk: A population‐based case‐control study in China

Abstract The relationship between risk of esophageal squamous cell carcinoma (ESCC) and adult height, changes in individual body mass index (BMI) and body shape is not established. We performed a large population‐based case‐control study, which enrolled a total of 1414 ESCC cases and 1989 controls in a high‐incidence area in China. Using face‐to‐face interview with a structured questionnaire, information on participants' heights, weights, and perceived body shapes at 20 years of age was collected. Additionally, data on weight and perceived body shape among the same participants 10 years prior to ascertainment were collected using the same method. Odd ratios (ORs) of ESCC risk in relation to BMI and body shape were estimated using unconditional logistic regression models. The adjusted results indicated that ESCC risk in adults rapidly rose as height increased, plateauing at 170 cm among men and 157 cm among women. Among participants who were underweight, normal weight, or thinner than body shape 4, body weight loss was associated with increased risk of ESCC, and body weight gain was associated with decreased incidence of ESCC (ORs ranging from 0.40 to 0.76). Notably, however, changes in body weight did not significantly affect ESCC risk among participants who were overweight, obese, or larger than body shape 3. Maintaining a fit body shape and a reasonable BMI is advisable and of vital importance to reduce the risk of ESCC, especially in high‐risk areas.

Yang, Xiaorong↗

Discrete element modeling of granular hopper flow of irregular-shaped deformable particles

Many natural and engineered granular materials have relatively deformable particles. Besides particle size and shape, particle deformability is another salient factor that significantly impacts the material’s flow behavior. Here, in this work, the flow of irregular-shaped deformable particles in a wedge-shaped hopper is investigated using discrete element simulations. A bonded-sphere model is developed to simultaneously capture irregular particle shapes and particle-wise deformations (e.g., compression, deflection, and distortion). Quantitative analysis of the effects of irregular shapes and particle deformations shows that the increase in particle stiffness tends to increase initial packing porosity and decrease the flow rate in the hopper. Rigid particles tend to have clogging issues, whereas deformable particles have less chance to, indicating particle deformation reduces the critical bridging width in the hopper flow. Detailed analysis of stress fields is also conducted to provide insights into the mechanism of particle flow and clogging. Stresses and discharge rates calculated from numerical simulations are compared and show good agreement with Walker’s theory and the extended Beverloo formula. Simulations with various particle shape combinations are also performed and show that the initial packing porosity decreases with an increasing percentage of fibers while the discharge rate has a complex dependency on particle shapes.

09 BIOMASS FUELS↗

Adjoint approach to calculating shape gradients for three-dimensional magnetic confinement equilibria

The shape gradient quantifies the change in some figure of merit resulting from differential perturbations to a shape. Shape gradients can be applied to gradient-based optimization, sensitivity analysis and tolerance calculation. An efficient technique for computing the shape gradient for toroidal three-dimensional magnetohydrodynamic (MHD) equilibria is introduced. The method is based on the self-adjoint property of the equations for driven perturbations of MHD equilibria and is similar to the Onsager symmetry of transport coefficients. Two versions of the shape gradient are considered. One describes the change in a figure of merit due to an arbitrary displacement of the outer flux surface; the other describes the change in the figure of merit due to the displacement of a coil. The method is implemented for several example figures of merit and compared with direct calculation of the shape gradient. In these examples the adjoint method reduces the number of equilibrium computations by factors of $O(N)$ , where $N$ is the number of parameters used to describe the outer flux surface or coil shapes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Resolving Nonequilibrium Shape Variations among Millions of Gold Nanoparticles

Nanoparticles, exhibiting functionally relevant structural heterogeneity, are at the forefront of cutting-edge research. Now, high-throughput single-particle imaging (SPI) with X-ray free-electron lasers (XFELs) creates opportunities for recovering the shape distributions of millions of particles that exhibit functionally relevant structural heterogeneity. To realize this potential, three challenges have to be overcome: (1) simultaneous parametrization of structural variability in real and reciprocal spaces; (2) efficiently inferring the latent parameters of each SPI measurement; (3) scaling up comparisons between 10 5 structural models and 10 6 XFEL-SPI measurements. Here, we describe how we overcame these three challenges to resolve the nonequilibrium shape distributions within millions of gold nanoparticles imaged at the European XFEL. These shape distributions allowed us to quantify the degree of asymmetry in these particles, discover a relatively stable “shape envelope” among nanoparticles, discern finite-size effects related to shape-controlling surfactants, and extrapolate nanoparticles’ shapes to their idealized thermodynamic limit. Ultimately, these demonstrations show that XFEL SPI can help transform nanoparticle shape characterization from anecdotally interesting to statistically meaningful.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Process Design by FEM Simulation for Shape Ring Rolling of Large-Sized Ring

Ring rolling process is usually used to fabricate large-sized ring, such as, tower flange for wind power electric generator. Many kinds of seamless ring are used in wind power electric generator and manufactured by ring rolling process. In general, final part is machined after forming with shape of plain square section. Since interests for near net shaping of seamless ring have been increased gradually because of green energy, it is necessary to develop the technology for shape ring rolling with respect to the market demands and cost. Therefore, we studied the process and die design for shape ring rolling of large sized ring over 3,500 mm out diameter by experiment and FEM simulation. Ring rolling process is very difficult to solve by FEM method because of equilibrium state and size effect, etc. Moreover, shape ring rolling is more difficult to solve the problem that two plastic deformation zones are different each other, that is main roll and conical roll. Also since conical roll has a shape, deformation velocity field is very much complex and the deformed section passed axial roll is different section and velocity field. The FE simulations are performed to analyze process variables affected in forming of profiled ring. Therefore, the main features of used FE model are: (1) it adopts a transient or unsteady state full ring mesh to model the deformation processes and shape development; (2) the mandrel and conical rolls are modeled using coupled heat-transfer elements; (3) the model involves the full process from blank through perform to final profiled ring. From these calculated results, we have proposed the mechanisms of various tools, such as mandrel and conical roll. The calculated results are compared experimental results. Calculated results can predict the tilting of profiled ring and then process variables to form large sized ring.

36 MATERIALS SCIENCE↗

Novel free-form hohlraum shape design and optimization for laser-driven inertial confinement fusion

The hohlraum shape attracts considerable attention because there is no successful ignition method for laser-driven inertial confinement fusion at the National Ignition Facility. The available hohlraums are typically designed with simple conic curves, including ellipses, parabolas, arcs, or Lame curves, which allow only a few design parameters for the shape optimization, making it difficult to improve the performance, e.g., the energy coupling efficiency or radiation drive symmetry. A novel free-form hohlraum design and optimization approach based on the non-uniform rational basis spline (NURBS) model is proposed. In the present study, (1) all kinds of hohlraum shapes can be uniformly represented using NURBS, which is greatly beneficial for obtaining the optimal available hohlraum shapes, and (2) such free-form uniform representation enables us to obtain an optimal shape over a large design domain for the hohlraum with a more uniform radiation and higher drive temperature of the fuel capsule. Finally, a hohlraum is optimized and evaluated with respect to the drive temperature and symmetry at the Shenguang III laser facility in China. The drive temperature and symmetry results indicate that such a free-form representation is advantageous over available hohlraum shapes because it can substantially expand the shape design domain so as to obtain an optimal hohlraum with high performance.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Tunable configurational anisotropy in collective magnetization dynamics of Ni{sub 80}Fe{sub 20} nanodot arrays with varying dot shapes

We present broadband ferromagnetic resonance measurements of tunable spin wave anisotropy in arrays of nanodots with different dot shapes. Magnetization dynamics of the circular dot array shows two modes, while square, diamond, and triangular dot arrays show three, three, and four modes, respectively. Various distinct rotational symmetries in the configurational anisotropy of the nanodot arrays are observed with the variation of dot shape. The observed spin wave modes are reproduced by micromagnetic simulations and the calculated mode profiles show different collective modes determined by internal and stray magnetic fields. Effects of dot shapes are observed in combination with the effects of lattice symmetry and the shape of the boundary of the array. The collective behaviour is observed to be weakest in the diamond shaped dots and strongest in circular shaped dots. This is further confirmed by the stray field calculation. The large variation of spin wave mode frequencies and their configurational anisotropies with dot shapes are important for selection of suitable basis structures for future magnonic crystals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Controlling laser-dressed resonance line shape using attosecond extreme-ultraviolet pulse with a spectral minimum

High-harmonic generation from a gas target exhibits sharp spectral features and rapid phase variation near the Cooper minimum. By applying spectral filtering, shaped isolated attosecond pulses can be generated where the pulse is split into two in the time domain. Using such shaped extreme-ultraviolet (XUV) pulses, we theoretically study attosecond transient absorption (ATA) spectra of helium 2s2p autoionizing state which is resonantly coupled to the 2s 2 dark state by a time-delayed infrared laser. Our simulations show that the asymmetric 2s2p Fano line shape can be readily tuned into symmetric Lorentzian within the time delay of a few tens of attoseconds. Such efficient control is due to the destructive interference in the generation of the 2s2p state when it is excited by a strongly shaped XUV pulse. This is to be compared to prior experiments where tuning the line shape of a Fano resonance would take tens of femtoseconds. We also show that the predicted ATA spectral line shape can be observed experimentally after propagation in a gas medium. Our results suggest that strongly shaped attosecond XUV pulses offer the opportunity for controlling and probing fine features of narrow resonances on the few-ten attoseconds timescale.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

THE SHAPES OF MILKY WAY SATELLITES: LOOKING FOR SIGNATURES OF TIDAL STIRRING

We study the shapes of Milky Way satellites in the context of the tidal stirring scenario for the formation of dwarf spheroidal galaxies. The standard procedures used to measure shapes involve smoothing and binning of data and thus may not be sufficient to detect structural properties such as bars, which are usually subtle in low surface brightness systems. Taking advantage of the fact that in nearby dwarfs photometry of individual stars is available, we introduce discrete measures of shape based on the two-dimensional inertia tensor and the Fourier bar mode. We apply these measures of shape first to a variety of simulated dwarf galaxies formed via tidal stirring of disks embedded in dark matter halos and orbiting the Milky Way. In addition to strong mass loss and randomization of stellar orbits, the disks undergo morphological transformation that typically involves the formation of a triaxial bar after the first pericenter passage. These tidally induced bars persist for a few Gyr before being shortened toward a more spherical shape if the tidal force is strong enough. We test this prediction by measuring in a similar way the shape of nearby dwarf galaxies, satellites of the Milky Way. We detect inner bars in Ursa Minor, Sagittarius, Large Magellanic Cloud, and possibly Carina. In addition, 6 out of 11 dwarfs that we studied show elongated stellar distributions in the outer parts that may signify transition to tidal tails. We thus find the shapes of Milky Way satellites to be consistent with the predictions of the tidal stirring model.

79 ASTRONOMY AND ASTROPHYSICS↗

Effect of higher-order multipole moments on the Stark line shape

Spectral line shapes are sensitive to plasma conditions and are often used to diagnose electron density of laboratory plasmas as well as astrophysical plasmas. Stark line-shape models take into account the perturbation of the radiator’s energy structure due to the Coulomb interaction with the surrounding charged particles. Solving this Coulomb interaction is challenging and is commonly approximated via a multipole expansion. Yet, most models include only up to the second term of the expansion (the dipole term). While there have been studies on the higher-order terms due to one of the species (i.e. either ions or electrons), there is no model that includes the terms beyond dipole from both species. Here, we investigate the importance of the higher-order multipole terms from both species on the Hβ line shape. First, we find that it is important to include higher order terms consistently from both ions and electrons to reproduce measured line-shape asymmetry. Next, we study the line shape convergence with the higher-order terms at 1017, 1018, and 1019 e/cc. We discover that the line shape calculated with the dipole-only approximation becomes inaccurate as density increases. It is necessary to include only up to the third (quadrupole) term to compute the line-shape accurately within 2%. Since most existing models include only the dipole terms, the densities inferred with such models are in question. Finally, we investigate the impact of neglecting the quadrupole terms on density diagnostics. We find that the model without the quadrupole term slightly underestimates the density, and the discrepancy becomes as large as 12% at high densities. Although the case of study is limited to Hβ , we expect similar impact on other lines.

74 ATOMIC AND MOLECULAR PHYSICS↗

The Shape Factor for Pits and Its Impact on Pit Stability

This study employs the finite element method (FEM) to predict the impact of pit shape on pit stability via shape factors of various pit geometries relevant to localized corrosion. Lower values of the shape factor indicate an increased ease in maintaining pit stability. Analyzed geometries include undercut pits, bispherical pit-within-pit structures, and covered pits with perforated (lacy) covers. The effect of the water layer thickness, transport properties of the electrolyte inside and outside the pit, and cathode location on the pit shape factor were also explored. Results show that occluded pits exhibit lower shape factors than open ones, with disk-shaped pits decreasing further as c/r ratio and occlusion angle increase. The findings also suggest minimal influence from a secondary pit if the primary remains active. An equation is presented that quantifies the impact of lacy covers, revealing significant shape factor value reduction. Additionally, high salt concentrations inside pits have a limited stabilizing effect compared to geometry, while thin water layers and adjacent cathodic/sinks reduce pit stability.

Shehi, A. (ORCID:0009000271548041)↗

The Shape and Density Evolution of Snow Aggregates

Abstract Snow aggregates evolve into a variety of observed shapes and densities. Despite this diversity, models and observational studies employ fractal or Euclidean geometric measures that are assumed universal for all aggregates. This work therefore seeks to improve understanding and representation of snow aggregate geometry and its evolution by characterizing distributions of both observed and Monte Carlo–generated aggregates. Two separate datasets of best-fit ellipsoid estimates derived from Multi-Angle Snowflake Camera (MASC) observations suggest the use of a bivariate beta distribution model for capturing aggregate shapes. Product moments of this model capture shape effects to within 4% of observations. This mathematical model is used along with Monte Carlo simulated aggregates to study how combinations of monomer properties affect aggregate shape evolution. Plate aggregates of any aspect ratio produce a consistent ellipsoid shape evolution whereas thin column aggregates evolve to become more spherical. Thin column aggregates yield fractal dimensions much less than the often-assumed value of 2.0. Ellipsoid densities and fractal analogs of density (lacunarity) are much more variable depending on combinations of monomer size and shape. Simple mathematical scaling relationships can explain the persistent triaxial ellipsoid shapes that appear in both observed and modeled aggregates. Overall, both simulations and observations prove aggregates are rarely oblate. Therefore, the use of the proposed bivariate ellipsoid distribution in models will allow for similar-sized aggregates to exhibit a realistic dispersion of masses and fall speeds.

54 ENVIRONMENTAL SCIENCES↗

Event Shapes in $p\bar p$ Collisions at $\sqrt{s} = 1.96$ TeV

This dissertation presents the analysis of nine different event shapes measured in high energy p$\bar{p}$ collisions. An event shape can be defined as an event-based quantity that measures how the final energies are distributed in the final event. This analysis will test strong interactions as described by Quantum Chromodynamics (QCD), through their implementation in different Monte Carlo-based models. Each of the event shapes provides information about the flow of energy in QCD events and about the hadronic final states that occur in p$\bar{p}$ particle collisions, thus allowing the study of the dynamics of QCD multijet events. Any deviation of an event shape from zero will be indicative of higher-order effects, meaning that more than the two jets were produced in the event. For each of the event shapes, both normalized differential distributions ( 1/σ dσ/dX) and average event shapes ($\bar{X}$σ) were measured, where X is the event shape and σ is the cross section. This analysis uses 0.7 fb -1 of data taken between 2004 and 2006 by the DØ detector located at the Fermi National Accelerator Lab (Fermilab) in Batavia, IL, using p$\bar{p}$ collisions at a center-of-mass energy of √s = 1.96 TeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Solid Phase Gradient Alloying Method via ShAPE

Alloying has been used to confer desirable properties to various metallic systems since the bronze age. For example, Ni, Mn, and Cr are alloyed into an Fe matrix to make steel, which has improved strength and corrosion resistance (as displayed in Fig. 1). In addition to the type of alloying elements, the amount of alloying elements added into a matrix is also very critical for a material’s mechanical property, physical property, machinability, and cost. Conventionally, new alloys are discovered by combining alloy precursors and elemental constituents into a mixture and melting them together. The solidified product or ingot represents a usually non-homogeneous combination of the chemistry with a microstructure dictated by the physics of solidification. It is time and energy intensive to optimize the alloying amounts via the casting process and hence, economically not conducive to rapid alloy discovery. In addition, the cast microstructure seen in the as-cast ingot is often not the ideal, nor even desired structure for optimized performance. Cast materials often need further processing such as homogenization, annealing, and deformation work put in through rolling, forging, extruding, etc. to have favorable microstructures and properties. A faster method to discover new alloy combinations and evaluate them in their worked or processed form is needed. Recently, Laser Engineered Net Shaping was applied to fabricate gradient compositional material for alloy designing. However, the mechanical properties of this gradient alloy were poor due to the existence of impurities, oxidation and cracks that are inherent in the melt-solidification process. Because of these limitations, we propose to use a solid-phase process (ShAPE) to create bulk materials (extrudates) that vary in composition from one end of the extruded solid to the other. Various manufacturing methods for alloy design including conventional casting method, laser based combinatorial method and current solid phase gradient alloying method are displayed and compared in Fig. 2. ShAPE machine and a schematic of ShAPE process are displayed in Fig. 3. Starting material is processed by a rotating and plunging die to form an extrudate. We are proposing through this methodology to invent a new, bulk-scale combinatorial technique. With this novel technique, alloying element can be dissolved into the matrix with a continued gradient without bulk melting. Formation of inter-metallics and defects originating from melt processing can be avoided. In addition, the ShAPE process creates the mixed alloy chemistry, and meanwhile subjects the material to severe plastic strain, which induces the favorable “worked” microstructure. Products from the ShAPE process can be tested in hardness directly providing a path to rapid evaluation of mechanical properties. The ability to create graded structures using friction stir processing (FSP) has been demonstrated, however using the ShAPE process we believe will lead to much faster and higher fidelity results. When combined with high throughput screening methods of physical, mechanical and microstructural property characterization, efficiency and accuracy of alloy design can be significantly improved.

36 MATERIALS SCIENCE↗

Reliable Determination of Pulses and Pulse-Shape Instability in Ultrashort Laser Pulse Trains Using Polarization-Gating and Transient-Grating Frequency-Resolved Optical Gating Using the RANA Approach

Devices that measure the presence of instability in the pulse shapes in trains of ultrashort laser pulses do not exist, so this task necessarily falls to pulse-measurement devices, like Frequency-Resolved Optical Gating (FROG) and its variations, which have proven to be a highly reliable class of techniques for measuring stable trains of ultrashort laser pulses. Fortunately, multi-shot versions of FROG have also been shown to sensitively distinguish trains of stable from those of unstable pulse shapes by displaying readily visible systematic discrepancies between the measured and retrieved traces in the presence of unstable pulse trains. However, the effects of pulse-shape instability and algorithm stagnation can be indistinguishable, so a never-stagnating algorithm—even when instability is present—is required and is generally important. In previous work, we demonstrated that our recently introduced Retrieved-Amplitude N-grid Algorithmic (RANA) approach produces highly reliable (100%) pulse-retrieval in the second-harmonic-generation (SHG) version of FROG for thousands of sample trains of pulses with stable pulse shapes. Further, it does so even for trains of unstable pulse shapes and thus both reliably distinguishes between the two cases and provides a rough measure of the degree of instability as well as a reasonable estimate of most typical pulse parameters. Here, we perform the analogous study for the polarization-gating (PG) and transient-grating (TG) versions of FROG, which are often used for higher-energy pulse trains. We conclude that PG and TG FROG, coupled with the RANA approach, also provide reliable indicators of pulse-shape instability. In addition, for PG and TG FROG, the RANA approach provides an even better estimate of a typical pulse in an unstable pulse train than SHG FROG does, even in cases of significant pulse-shape instability.

47 OTHER INSTRUMENTATION↗

The Intrinsic Shapes of Low Surface Brightness Galaxies (LSBGs): A Discriminant of LSBG Galaxy Formation Mechanisms

We use the low surface brightness galaxy (LSBG) samples created from the Hyper Suprime-Cam Subaru Strategic Program (781 galaxies), the Dark Energy Survey (20977 galaxies), and the Legacy Survey (selected via H ι detection in the Arecibo Legacy Fast ALFA Survey, 188 galaxies) to infer the intrinsic shape distribution of the LSBG population. To take into account the effect of the surface brightness cuts employed when constructing LSBG samples, we simultaneously model both the projected ellipticity and the apparent surface brightness in our shape inference. We find that the LSBG samples are well characterized by oblate spheroids, with no significant difference between red and blue LSBGs. This inferred shape distribution is in good agreement with similar inferences made for ultra-diffuse cluster galaxy samples, indicating that environment does not play a key role in determining the intrinsic shape of LSBGs. In this study, we also find some evidence that LSBGs are more thickened than similarly massive high surface brightness dwarfs. We compare our results to intrinsic shape measures from contemporary cosmological simulations, and find that the observed LSBG intrinsic shapes place considerable constraints on the formation path of such galaxies. In particular, LSBG production via the migration of star formation to large radii produces intrinsic shapes in good agreement with our observational findings.

79 ASTRONOMY AND ASTROPHYSICS↗

Interface shape in Czochralski grown crystals - Effect of conduction and radiation

A sequential modular computational scheme has been proposed for the calculation of temperature profiles in the melt and crystal including the melt-crystal interface shape and the crystal pulling rate for a fixed crystal radius. The heat transfer in the melt is assumed to occur by conduction only. The shape of melt-gas meniscus, described by Laplace-Young equation, is incorporated in the model and its effects on interface shape and pulling rate are examined. Further, the model incorporates the detailed radiation interaction among the various surfaces in the puller using the Gebhart enclosure theory which accounts for both direct and reflected radiation. The effects of various process parameters on the interface shape and the pulling rate have been investigated. The results of this study indicate that the shape of the melt-gas meniscus has a significant effect on the pulling rate and the interface shape in conformity with earlier studies. Further, it is shown that a simple radiation model (Stefan's model) is inadequate to model the radiation heat exchange in the Czochralski puller apparatus and the detailed Gebhart analysis is necessary for accurate calculation of both the temperature profile in the crystal as well as the interface shape.

Srivastava, R. K.↗

Analytical ice shape predictions for flight in natural icing conditions

LEWICE is an analytical ice prediction code that has been evaluated against icing tunnel data, but on a more limited basis against flight data. Ice shapes predicted by LEWICE is compared with experimental ice shapes accreted on the NASA Lewis Icing Research Aircraft. The flight data selected for comparison includes liquid water content recorded using a hot wire device and droplet distribution data from a laser spectrometer; the ice shape is recorded using stereo photography. The main findings are as follows: (1) An equivalent sand grain roughness correlation different from that used for LEWICE tunnel comparisons must be employed to obtain satisfactory results for flight; (2) Using this correlation and making no other changes in the code, the comparisons to ice shapes accreted in flight are in general as good as the comparisons to ice shapes accreted in the tunnel (as in the case of tunnel ice shapes, agreement is least reliable for large glaze ice shapes at high angles of attack); (3) In some cases comparisons can be somewhat improved by utilizing the code so as to take account of the variation of parameters such as liquid water content, which may vary significantly in flight.

Berkowitz, Brian M.↗