Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SULFONATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Transport–Friendly Microstructure in SSC–MEA: Unveiling the SSC Ionomer–Based Membrane Electrode Assemblies for Enhanced Fuel Cell Performance

The significant role of the cathodic binder in modulating mass transport within the catalyst layer (CL) of fuel cells is essential for optimizing cell performance. This investigation focuses on enhancing the membrane electrode assembly (MEA) through the utilization of a short-side-chain perfluoro-sulfonic acid (SSC-PFSA) ionomer as the cathode binder, referred to as SSC-MEA. This study meticulously visualizes the distinctive interpenetrating networks of ionomers and catalysts, and explicitly clarifies the triple-phase interface, unveiling the transport-friendly microstructure and transport mechanisms inherent in SSC-MEA. The SSC-MEA exhibits advantageous microstructural features, including a better-connected ionomer network and well-organized hierarchical porous structure, culminating in superior mass transfer properties. Relative to the MEA bonded by long-side-chain perfluoro-sulfonic acid (LSC-PFSA) ionomer, noted as LSC-MEA, SSC-MEA exhibits a notable peak power density (1.23 W cm –2 ), efficient O 2 transport, and remarkable proton conductivity (65% improvement) at 65 °C and 70% relativity humidity (RH). These findings establish crucial insights into the intricate morphology-transport-performance relationship in the CL, thereby providing strategic guidance for developing highly efficient MEA.

25 ENERGY STORAGE↗

Comparison of Quinone-Based Catholytes for Aqueous Redox Flow Batteries and Demonstration of Long-Term Stability with Tetrasubstituted Quinones

Quinones are appealing targets as organic electrolytes for aqueous redox flow batteries (RFBs), but their utility continues to be constrained by limited stability under operating conditions. The present study evaluates the stability of a series water-soluble quinones, with redox potentials ranging from 605–885 mV vs. NHE, under acidic aqueous conditions (1 M H2SO4). Four of the quinones are examined as cathodic electrolytes in an aqueous RFB, paired with anthraquinone-2,7-disulfonate (AQDS) as the anodic electrolyte. The RFB data complement the solution stability measures and show that the most stable electrolyte is a tetrasubstituted quinone containing four sulfonated thioether substituents. The results highlight the importance of substituting all C–H positions of the quinone in order to maximize the quinone stability and set the stage for design of improve organic electrolytes for aqueous RFBs. The authors thank Joseph Fourie for assisting in the synthesis of compound 8. Financial support for this work was provided by the Center for Molecular Electrocatalysis, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences (SSS, TWR, JBG, CWA, YP), with supplemental contributions by the Wisconsin Alumni Research Foundation (WARF) through the WARF Accelerator Program (YQ and partial support for JBG, CWA, YP). NMR spectroscopy facilities were partially supported by the NSF (CHE-0342998 and CHE-1048642), a UW Madison Instructional Laboratory Modernization Award, and a gift from Paul J. and Margaret M. Bender.

aqueous flow batteries, quinones, organic, redox m↗

Rate and Selectivity Control in Thioether and Alkene Oxidation with H 2 O 2 over Phosphonate-Modified Niobium(V)-Silica Catalysts

Supported metal oxide catalysts are versatile materials for liquid-phase oxidations, including alkene epoxidation and thioether sulfoxidation with H2O2. Periodic trends in H2O2 activation was recently demonstrated for alkene epoxidation, highlighting Nb-SiO2 as a more active and selective catalyst than Ti-SiO2. Three representative catalysts are studied consisting of NbV, TiIV, and ZrIV on silica, each made through a molecular precursor approach that yields highly dispersed oxide sites, for thioanisole oxidation by H2O2. Initial rates trend Nb>Ti>>Zr, as for epoxidation, and Nb outperforms Ti for a number of other thioethers. In contrast, selectivity to sulfoxide vs. sulfone trends Ti>Nb>>Zr at all conversions. Modifying the Nb-SiO2 catalyst with phenylphosphonic acid does not completely remove sulfoxidation reactivity, as it did for photooxidation and epoxidation, and results in an unusual material active for sulfoxidation but neither epoxidation nor overoxidation to the sulfone.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Organic sulfur from source to sink in low‐sulfate Lake Superior

Abstract Organic sulfur plays a crucial role in the biogeochemistry of aquatic sediments, especially in low sulfate (< 500 μ M) environments like freshwater lakes and the Earth's early oceans. To better understand organic sulfur cycling in these systems, we followed organic sulfur in the sulfate‐poor (< 40 μ M) iron‐rich (30–80 μ M) sediments of Lake Superior from source to sink. We identified microbial populations with shotgun metagenomic sequencing and characterized geochemical species in porewater and solid phases. In anoxic sediments, we found an active sulfur cycle fueled primarily by oxidized organic sulfur. Sediment incubations indicated a microbial capacity to hydrolyze sulfonates, sulfate esters, and sulfonic acids to sulfate. Gene abundances for dissimilatory sulfate reduction ( dsrAB ) increased with depth and coincided with sulfide maxima. Despite these indicators of sulfide formation, sulfide concentrations remain low (< 40 nM) due to both pyritization and organic matter sulfurization. Immediately below the oxycline, pyrite accounted for 13% of total sedimentary sulfur. Both free and intact lipids in this same interval accumulated disulfides, indicating rapid sulfurization even at low concentrations of sulfide. Our investigation revealed a new model of sulfur cycling in a low‐sulfate environment that likely extends to other modern lakes and possibly the ancient ocean, with organic sulfur both fueling sulfate reduction and consuming the resultant sulfide.

Phillips, Alexandra A.↗

Phase Behavior of a Single Structured Ionomer Chain in Solution

Structured polymers offer a means to tailor transport pathways within mechanically stable manifolds. Here we examine the building block of such a membrane, namely a single large pentablock co-polymer that consist of a center block of a randomly sulfonated polystyrene, designed for transport, tethered to poly-ethylene-r-propylene and end-capped by poly-t-butyl styrene, for mechanical stability,using molecular dynamics simulations. The polymer structure in a cyclohexane-heptane mixture, a technologically viable solvent, and in water, a poor solvent for all segments and a ubiquitous substance is extracted. In all solvents the pentablock collapsed into nearly spherical aggregates where the ionic block is segregated. In hydrophobic solvents, the ionic block resides in the center, surrounded by swollen intermix of flexible and end blocks. In water all blocks are collapsed with the sulfonated block residing on the surface. Our results demonstrate that solvents drive different local nano-segregation, providing a gateway to assemble membranes with controlled topology.

36 MATERIALS SCIENCE↗

Determining sulfur speciation in oxidatively crosslinked degradable polymers using sulfur K-edge X-ray absorption spectroscopy

A new family of water-degradable elastic polymers prepared by oxidative crosslinking of the parent polythionolactones shows promise in a broad range of applications, but the compositions of these materials elude conventional analytical methods. Here, in this work, we use sulfur K-edge X-ray absorption spectroscopy to quantify the amounts of thioether, disulfide, sulfone, sulfate ester, and thionoester in each polymer and to rule out the presence of several other functional groups, including sulfonate, thiosulfonate, sulfate, and sulfoxide. We rationalize this speciation as a function of linker flexibility in the context of sulfinyl cycloaddition reactions and propose a mechanism of aggregation for the oxidized polymers. Our results correlate with swelling ratios but not with porosity nor crosslink density measurements, demonstrating the importance of pairing mechanical and chemical techniques when characterizing heterogeneous organic polymers. Finally, we take advantage of the proximity of the gold M 4,5 -edges to the sulfur K-edge to analyze the binding and reactivity of Au(III) with the crosslinked polymers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrophilic domain structure in polymer exchange membranes: Simulations of NMR spin diffusion experiments to address ability for model discrimination

Here, we detail the development of a flexible simulation program (NMR_DIFFSIM) that solves the nuclear magnetic resonance (NMR) spin diffusion equation for arbitrary polymer architectures. The program was used to explore the proton ( 1 H) NMR spin diffusion behavior predicted for a range of geometrical models describing polymer exchange membranes. These results were also directly compared with the NMR spin diffusion behavior predicted for more complex domain structures obtained from molecular dynamics (MD) simulations. The numerical implementation and capabilities of NMR_DIFFSIM were demonstrated by evaluating the experimental NMR spin diffusion behavior for the hydrophilic domain structure in sulfonated Diels-Alder Poly(Phenylene) (SDAPP) polymer membranes. The impact of morphology variations as a function of sulfonation and hydration level on the resulting NMR spin diffusion behavior were determined. These simulations allowed us to critically address the ability of NMR spin diffusion to discriminate between different structural models, and to highlight the extremely high fidelity experimental data required to accomplish this. A direct comparison of experimental double-quantum-filtered 1 H NMR spin diffusion in SDAPP membranes to the spin diffusion behavior predicted for MD-proposed morphologies revealed excellent agreement, providing experimental support for the MD structures at low to moderate hydration levels.

36 MATERIALS SCIENCE↗

Screening a knowledge‐based library of low molecular weight compounds against the proline biosynthetic enzyme 1‐pyrroline‐5‐carboxylate 1 ( PYCR1)

Abstract Δ 1 ‐pyrroline‐5‐carboxylate reductase isoform 1 (PYCR1) is the last enzyme of proline biosynthesis and catalyzes the NAD(P)H‐dependent reduction of Δ 1 ‐pyrroline‐5‐carboxylate toL‐proline. High PYCR1 gene expression is observed in many cancers and linked to poor patient outcomes and tumor aggressiveness. The knockdown of thePYCR1gene or the inhibition of PYCR1 enzyme has been shown to inhibit tumorigenesis in cancer cells and animal models of cancer, motivating inhibitor discovery. We screened a library of 71 low molecular weight compounds (average MW of 131 Da) against PYCR1 using an enzyme activity assay. Hit compounds were validated with X‐ray crystallography and kinetic assays to determine affinity parameters. The library was counter‐screened against human Δ 1 ‐pyrroline‐5‐carboxylate reductase isoform 3 and proline dehydrogenase (PRODH) to assess specificity/promiscuity. Twelve PYCR1 and one PRODH inhibitor crystal structures were determined. Three compounds inhibit PYCR1 with competitive inhibition parameter of 100 μM or lower. Among these, (S)‐tetrahydro‐2H‐pyran‐2‐carboxylic acid (70 μM) has higher affinity than the current best tool compoundN‐formyl‐l‐proline, is 30 times more specific for PYCR1 over human Δ 1 ‐pyrroline‐5‐carboxylate reductase isoform 3, and negligibly inhibits PRODH. Structure‐affinity relationships suggest that hydrogen bonding of the heteroatom of this compound is important for binding to PYCR1. The structures of PYCR1 and PRODH complexed with 1‐hydroxyethane‐1‐sulfonate demonstrate that the sulfonate group is a suitable replacement for the carboxylate anchor. This result suggests that the exploration of carboxylic acid isosteres may be a promising strategy for discovering new classes of PYCR1 and PRODH inhibitors. The structure of PYCR1 complexed withl‐pipecolate and NADH supports the hypothesis that PYCR1 has an alternative function in lysine metabolism.

Biochemistry & Molecular Biology↗

Temporally Stable Supramolecular Polymeric Salts Enabling High-Performance 3D All-Aromatic Polyimide Lattices

Vat photopolymerization (VP) Additive Manufacturing (AM), in which UV light is selectively applied to cure photo-active polymers into complex geometries with micron-scale resolution, has a limited selection of aliphatic thermoset materials that exhibit relatively poor thermal performance. Ring-opening dianhydrides with acrylate-containing nucleophiles yielded diacrylate ester-dicarboxylic acids that enabled photo-active polyimide (PI) precursors, termed polysalts, upon neutralization with an aromatic diamine in solution. In situ FTIR spectroscopy coupled with a solution and photo-rheological measurements revealed a previously unknown time-dependent instability of 4,4'-oxydianiline (ODA) polysalts due to an aza-Michael addition. Replacement of the electron-donating ether-containing diamine with an electron withdrawing sulfone-containing monomer, e.g., 4,4'-diaminodiphenyl sulfone (DDS), prohibited the aza-Michael addition of the aromatic amine to the activated acrylate double bond. Novel DDS polysalt photocurable solutions are similarly analyzed and validated long-term stability, which enabled reproducible printing of polyimide organogel intermediates. Subsequent VP AM afforded 3-dimensional (3D) structures of intricate complexity and excellent surface finish, as demonstrated with scanning electron microscopy. In addition, the novel PMDA-HEA/DDS solution enabled the production of the first beam latticed architecture comprised of all-aromatic polyimide. Finally, the versatility of a polysalt platform for multi-material printing is further demonstrated by printing parts with alternating polysalt compositions.

36 MATERIALS SCIENCE↗

Cation exchange kinetics of pyridinecarboxylic acids

The sorption—desorption kinetics of nicotinic and isonicotinic acids on strong acid cationites (sulfocationite CU-2-8, sulfonated polycalixarene) were considered. The rate of the processes, following both the cation exchange mechanism H{sup +} ⇄ Cat{sup +} and the ion exchange mechanism accompanied by the chemical reaction of protonation of pyridinecarboxylic acid zwitterions, is determined by a slow diffusion of components in the polymeric phase. The interdiffusion coefficient in sulfocationite CU-2-8 for the process H{sup +} ⇄ Cat{sup +} was equal to ~1•10{sup –11} m{sup 2} s{sup –1}, in sulfonated polycalixarene the corresponding value was in the range of (1—4)•10{sup –12} m{sup 2} s{sup –1}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synergistic effect of dual Brønsted acidic deep eutectic solvents for oxidative desulfurization of diesel fuel

Deep eutectic solvents (DESs) are generally used as attractive solvents or extractants rather than catalysts in the field of synthesis and separation. Herein, dual Brønsted acidic DESs were prepared by mixing sulfonated quaternary ammonium and oxalic acid as extractants and catalysts for deep oxidative desulfurization. Compared to the DESs with single acidic group, the dual acidic DESs exhibited much higher catalytic activity likely due to the synergistic effect. The 1 H NMR study indicated that the weak interaction between DES and sulfur compounds led to a low extraction capacity. However, the sulfur removal could reach 97.7% under optimized reaction conditions. Density functional theory (DFT) calculations demonstrated that sulfonic group and carboxylic group are of equal importance to desulfurization performance. Further, the desulfurization efficiency was also strongly affected by the viscosity of DESs. Here, we put forward a new strategy that the reaction time could be sharply shortened to 40 min and 100 min by adding low viscous acetonitrile and polyethylene glycol into DES to form mixing reaction system, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surfactant inhibition mechanisms of carbonate mineral dissolution in shale

Surfactants are common additives to hydraulic fracturing and enhanced oil recovery (EOR) fluids, and are under consideration for amendment to supercritical carbon dioxide for geological carbon sequestration (GCS). The effect of a common anionic surfactant, internal olefin sulfonate (IOS), on mineral dissolution from shale into brine was evaluated. When added to brine at concentrations exceeding the critical micelle concentration (94 mg/L), IOS inhibited carbonate mineral dissolution in an Eagle Ford shale, as well as dissolution of optical quality calcite (the dominant carbonate in the shale). Laser profilometry images provide spatial resolution across > 3 orders of magnitude, and indicate that IOS addition to brine both enhances the formation of new etch pits in calcite, and impedes their further growth. Time-of-flight secondary ion mass spectrometry surface profiles show for the first time that IOS preferentially adsorbs at calcite pit edges versus flat calcite surfaces (i.e., terraces). Surface pressure calculations, sulfur K-edge near edge X-ray absorption fine structure (NEXAFS) spectroscopy results, and density functional theory (DFT) calculations support this observation; the DFT results indicate that the sulfonate head group of the IOS molecule binds strongly to the calcite step site as compared to the terrace site. The S K-edge NEXAFS results indicate that IOS adsorbed more to etched calcite surfaces compared to smooth calcite surfaces. Overall, the results indicate that weak adsorption on flat calcite surfaces (i.e., terraces) disrupts water structure and enhances mass transfer of dissolution, while strong adsorption on calcite pit edges displaces adsorbed water and inhibits further etch pit growth. This work provides the first direct evidence of preferential adsorption of IOS to etched calcite surfaces and links it to macroscopic dissolution kinetics. Finally, this work has implications for surfactant-containing fluids used in hydraulic fracturing, EOR and potentially GCS for subsurface injection into carbonate rich reservoirs.

36 MATERIALS SCIENCE↗

Impacts of divalent cations (Mg 2+ and Ca 2+ ) on PFAS bioaccumulation in freshwater macroinvertebrates representing different foraging modes

Per- and polyfluoroalkyl substances (PFAS) have extensively contaminated freshwater aquatic ecosystems where they can be transported in water and partition to sediment and biota. In this paper, three freshwater benthic macroinvertebrates with different foraging modes were exposed to environmentally relevant concentrations of eight perfluoroalkyl carboxylates (PFCA), three perfluoroalkyl sulfonates (PFSA), and three fluorotelomer sulfonates (FTS) at varying divalent cation concentrations of magnesium (Mg 2+ ) and calcium (Ca 2+ ). Divalent cations can impact PFAS partitioning to solids, especially to sediments, at higher concentrations. Sediment dwelling worms (Lumbriculus variegatus), epibenthic grazing snails (Physella acuta), and sediment-dwelling filter-feeding bivalves (Elliptio complanata) were selected due to their unique foraging modes. Microcosms were composed of synthetic sediment, culture water, macroinvertebrates, and PFAS and consisted of a 28-day exposure period. L. variegatus had significantly higher PFAS bioaccumulation than P. acuta and E. complanata, likely due to higher levels of interactions with and ingestion of the contaminated sediment. “High Mg 2+ ” (7.5 mM Mg 2+ ) and “High Ca 2+ ” (7.5 mM Ca 2+ ) conditions generally had statistically higher bioaccumulation factors (BAF) than the “Reference Condition” (0.2 mM Ca 2+ and 0.2 mM Mg 2+ ) for PFAS with perfluorinated chain lengths greater than eight carbons. Long-chain PFAS dominated the PFAS profiles of the macroinvertebrates for all groups of compounds studied (PFCA, PFSA, and FTS). Furthermore, these results indicate that the study organism has the greatest impact on bioaccumulation, although divalent cation concentration had observable impacts between organisms depending on the environmental conditions. Elevated cation concentrations in the microcosms led to significantly greater bioaccumulation in the test organisms compared to the experimental reference conditions for long-chain PFAS.

54 ENVIRONMENTAL SCIENCES↗

Analysis of the presence of perfluoroalkyl substances in water, sediment and biota of the Jucar River (E Spain). Sources, partitioning and relationships with water physical characteristics

The presence, sources and partitioning of 21 perfluoroalkyl substances (PFASs: C4–C14, C16, C18 carboxylate, C4, C6–C10 sulfonates and C8 sulfonamide) were assessed in water, sediment, and biota of the Jucar River basin (E Spain). Considering the three matrices, perfluoropentanoate (PFPeA) and perfluorooctane sulfonate (PFOS) were the most frequent compounds, being remarkable the high occurrence of short-chain PFASs (C≤8), which are intended to replace the long-chain ones in several industrial and commercial applications. In general, all samples were contaminated with at least one PFAS, with the exception of three fish samples. Mean concentrations detected in sediments (0.22–11.5 ng g{sup −1}) and biota (0.63–274 µg kg{sup −1}) samples were higher than those measured in water (0.04–83.1 ng L{sup −1}), which might suggest (bio) accumulation. The occurrence of PFAS is related to urban and industrial discharges (Cuenca city in the upper part of basin, and car's factory, and effluents of the sewage treatment plant (STP) of Alzira, in the lower part). Increasing pollution gradients were found. On the other hand, higher contamination levels were observed after regulation dams of the catchment pointing out their importance in the re-distribution of these contaminants. None of the hazard quotients (HQ) calculated indicate potential risk for the different tropic levels considered (algae, Daphnia sp. and fish). PFAS concentrations found in this study can be considered in acceptable levels if compared to existing Regulatory Legislation and, consequently, they do not pose an immediate human health risk. - Highlights: • Distribution of 21 PFASs in water, sediment, biota of Jucar River is established. • PFPeA and PFOS are the predominant but high PFDA levels are related to industry. • PFASs in water and sediment related to the increase in NaCl, conductivity and TDS. • PFAS concentration in sediment/biota suggests (bio)accumulation. • None of the calculated HQs indicate potential risk for the different tropic levels.

54 ENVIRONMENTAL SCIENCES↗

Stability study of aqueous foams under high-temperature and high-pressure conditions relevant to Enhanced Geothermal Systems (EGS)

In Enhanced Geothermal System (EGS) hydraulic fracturing is carried out by injecting cold water into deep Hot Dry Rocks (HDR) under carefully controlled conditions to create new or reopen existing fractures. Water-based fracturing fluids demonstrate some challenges including immense quantity of water usage, water sensitivity of the formations, water blocking, and lack of proppant carrying capacity and transportation. Thus, an alternative is to use foam-based fracturing fluid which offers potential advantage over conventional water-based fracturing fluid such as minimum water usage, reduced wellbore damage, high proppant carrying capacity, and less environmental damage. However, foams are complex mixture of gaseous phase and liquid phase which are thermodynamically unstable at downhole conditions, and their stability can decrease over time due to liquid drainage, bubble coarsening, and coalescence. This paper shows laboratory experiments executed to study foam stability at high temperature (200°C) and high pressure (6.9MPa) conditions which simulates the geothermal environment. Foam stability was characterized by half-life of foam, which is defined as the time taken by the foam to decreases by 50% of its original height due to drainage. In this paper, two types of gaseous phases, nitrogen (N 2 ) and carbon dioxide (CO 2 ) were investigated. Also, based on successful practice of foam-based fracturing fluid in oil and gas industries, four surfactants, including Alpha olefin sulfonate (AOS), Sodium dodecyl sulfonate (SDS), Tergitol™ (NP – 40), and Cetyltrimethylammonium chloride (CTAC) at optimum concentration of 1wt.% were tested for best stability performance. In addition, different stabilizing agents including guar gum, bentonite clay, crosslinker, silicon dioxide nanoparticles (SiO 2 ), graphene oxide (GO) were also studied. Experimental results showed that N 2 foams were more stable than CO 2 foams. It was observed that foam half-life decreased with the increase in temperature. Among all the surfactants, AOS foams showed the most promising thermal stability at high temperatures. Moreover, with the addition of stabilizing agents, foam's half-life was enhanced. Stabilizing agents such as crosslinker and GO dispersion showed the most stable foams with half-life recorded at 20min and 17min, respectively, at 200°C and 6.9MPa. Finally, pressure also showed a positive effect on foam stability; with increased pressure, foam half-life was increased. Based on the experimental data, analytical models for the effect of temperature and pressure were developed, considering foam degradation is a first-order kinetic reaction that linearly depends on the foam drainage mechanism. The effect of temperature on foam half-life was studied as an exponential decay model. In this model, foam half-life is a function of drainage rate constant (D A ) and activation energy (E a ) of the foam system. The effect of pressure on foam half-life was found to obey a power-law model where an increase in pressure showed an increase in foam half-life. Furthermore, a linear relation was studied for the effect of pressure on foam activation energy and drainage rate. Then the combined effects of temperature and pressure were studied, which yielded an analytical model to predict the foam stabilities in terms of half-life for different foam compositions. In conclusion, this research indicates that with an appropriate selection of surfactants and stabilizing agents, it is possible to obtain stable foams, which could replace conventional water fracturing fluid under EGS conditions.

15 GEOTHERMAL ENERGY↗

Field experiments of surface water to groundwater recharge to characterize the mobility of uranium and vanadium at a former mill tailing site

Characterizing the mobility of uranium and vanadium in groundwater with a hydraulic connection to surface water is important to inform the best management practices of former mill tailing sites. In this study, the recharge of river water to the unsaturated and saturated zones of a uranium-contaminated alluvial aquifer was simulated in a series of forced-gradient single- and multi-well injection-extraction tests. The injection fluid (river water) was traced with natural and artificial tracers that included halides, fluorobenzoates, lithium, and naphthalene sulfonate to characterize the potential mass transport mechanisms of uranium and vanadium. The extraction fluid (river water/groundwater mixture) was analyzed for the tracers, uranium, and vanadium. The results from the tracers indicated that matrix diffusion was likely negligible over the spatiotemporal scales of the tests as evident by nearly identical breakthrough curves of the halides and fluorobenzoates. In contrast, the breakthrough curves of lithium and naphthalene sulfonate indicated that sorption by cation exchange and sorption to organic matter, respectively, were potential mass transport mechanisms of uranium and vanadium. Uranium was mobilized in the saturated zone containing gypsum (gypsum-rich zone), the vadose zone (vadose-rich zone), and the saturated zone containing organic carbon (organic-rich zone) whereas vanadium was mobilized only in the saturated gypsum-rich zone. The mechanisms responsible for the mobilization of uranium and vanadium were likely dissolution of uranium- and vanadium-bearing minerals and/or desorption from the gypsum-rich zone, flushing of uranium from the vadose-rich zone, and desorption of uranium from the organic-rich zone due to the natural contrast in the geochemistry between the river water and groundwater. The experimental design of this study was unique in that it employed the use of multiple natural and artificial tracers coupled with a direct injection of native river water to groundwater. Here, these results demonstrated that natural recharge and flooding events at former mill tailing sites can mobilize uranium, and possibly vanadium, and contribute to persistent levels of groundwater contamination.

54 ENVIRONMENTAL SCIENCES↗

Control of calcium carbonate crystallization by using anionic polymethylsiloxanes as templates

Sulfonated (SO{sub 3}H-PMS) and carboxylated (CO{sub 2}H-PMS) polymethylsiloxanes were synthesized and their effects as anionic template modifier on the CaCO{sub 3} crystal morphologies were evaluated. In vitro crystallization assays of CaCO{sub 3} were performed at room temperature by using gas diffusion method at different concentration, pH and time. SEM images of CaCO{sub 3} showed well-defined short calcite piles (ca. 5 {mu}m) and elongated calcite (ca. 20 {mu}m) when SO{sub 3}H-PMS was used. When CO{sub 2}H-PMS was used, the morphology of CaCO{sub 3} crystals was single-truncated at pH 7-9 and aggregated-modified calcite at pH 10-11. However, at pH 12 the least stable donut-shaped vaterite crystals were formed. EDS and XRD confirmed the presence of Si from anionic PMS templates on the CaCO{sub 3} surfaces and its polymorphism, respectively. Results showed that the selective morphologies of CaCO{sub 3} reflect the electrostatic interaction of anionic groups of functionalized PMS with Ca{sup 2+} adsorbed on CaCO{sub 3} crystals. Rounded and truncated-modified fluorescent CaCO{sub 3} was also produced by the inclusion of functionalized PMS into the lattice of CaCO{sub 3} matrix. We demonstrated that the anionic PMS offer a good modifier for polymer-controlled crystallization and a convenient approach for understanding the biomineralization field. - Graphical abstract: Optical photographs of rounded and truncated-modified fluorescent CaCO{sub 3} produced by the inclusion of sulfonated (SO{sub 3}H-PMS) polymethylsiloxanes into the lattice of CaCO{sub 3} matrix. Insert represents the simulation of modified and fluorescent CaCO{sub 3} crystals using Software JCrystal, (2008). Highlights: Black-Right-Pointing-Pointer We prepared two anionic polymethylsiloxanes (PMS) as templates. Black-Right-Pointing-Pointer Their modifier capacity on the CaCO{sub 3} crystal morphologies was demonstrated. Black-Right-Pointing-Pointer At pH 12, the least stable donut-shaped vaterite, was formed. Black-Right-Pointing-Pointer EDS confirmed the presence of Si from anionic PMS templates on the CaCO{sub 3} surfaces. Black-Right-Pointing-Pointer Fluorescent CaCO{sub 3} was produced by the inclusion of PMS into the CaCO{sub 3} matrix.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

$\mathrm{ATR}$-$\mathrm{FTIR}$ spectroscopy as a probe for metal ion binding onto immobilized ligands

ATR-FTIR spectroscopy is shown to be useful in probing metal ion binding to ligands immobilized on polymer beads. Lu(III) is the metal ion, phosphinic and sulfonic acids are the immobilized ligands, and polystyrene beads crosslinked at low and high levels are the support. Analysis is based on ligand band positions and intensities before and after complexation as a function of time. ATR spectra of the phosphinic acid show two types of binding sites with different accessibilities: surface ligands that bind Lu(III) from solution and interior ligands that gain ions by diffusion from the surface. Initially bound Lu(III) ions are mobile within the solid phase and their movement is accompanied by the breaking of hydrogen bonds among the phosphinic acid ligands to form Lu(III) phosphinate complexes. Competition between hydrogen bonding and bond-making with Lu(III) contributes to slow sorption rates compared to results from the sulfonic acid ligand whose strong acidity and ionizability allows rapid Lu(III) sorption. Comparing ATR spectra of the phosphinic acid bound to lightly- and highly-crosslinked polystyrene shows how the extent of crosslinking affects the transport mechanism.

36 MATERIALS SCIENCE↗