SEARCH · Engineering Papers

Results for “SOL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Microfluidic Uranium Microspheres Production for TRISO and Advanced Fuel Concepts

The purpose of this project was to expand existing internal gelation sol-gel capabilities at PNNL to explore producing uranium dioxide spheres for potential use as fuel kernels in next generation Tri-isotropic (TRISO) particle fuel. This project expands on previous sol-gel efforts at PNNL by (1) increasing the size regime of sphere production from the micro-fluidic range to the milli-fluidic range, and (2) producing uranium spheres. The approach involved first scaling up the channel size of the fluidic system to the millimeter range, with radiation safety considerations in mind; testing and demonstration on non-radioactive surrogate material, cerium oxide; then transitioning to uranium production and finally optimizing system parameters. Commercially available fluidic chips in the desired size range were could not be found, therefore the project designed and fabricated a T-junction with 1mm channels for droplet production. Because the production process is temperature sensitive, prior efforts have involved performing droplet production in a lab freezer. To reduce radiological waste and footprint, two alternative chilling methods were explored using aluminum thermal beads as a chill bath and a custom aluminum block fit to reagent reservoir sizes. Both were successful in the cerium tests, however the aluminum block design outperformed the thermal bead bath and was further adapted for the radiological test and production run in the Radiochemical Processing Laboratory (RPL). Gelation trials were performed to determine an acceptable range of feed solution parameters for the uranium dioxide gels, characterized by R-values, which is determined by the ratio of uranium nitrate to Hexamethylenetetramine (HMTA)/urea in the feed solution. R-values ranging from 1.6-2 were examined in the gelation trials, with only the 1.8 condition being tested in production. The project was successful in demonstrating a proof of concept design for producing uranium dioxide spheres, however further optimization is needed to dial in production parameters and improve sphere quality and homogeneity.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2024

NSTX-U liquid metal core-edge facility (LMCE)

NSTX-U/LMCE will provide a unique and world-leading research facility to address the primary challenge to delivering economic and timely magnetic fusion energy, namely the need to develop a power and particle exhaust and first-wall system that can withstand very high edge heat fluxes, maximize energy confinement, and avoid the production of large masses of solid eroded first-wall material. The NSTX-U/LMCE facility will assess the ability of liquid metals (LMs) – especially liquid lithium – to provide a new boundary condition for magnetic fusion systems, to extend the lifetime of the plasma facing components (PFCs) and improve core plasma confinement. Such capability is needed to establish the basis for next-step fusion facilities including fusion pilot plants, and to maintain U.S. world leadership in core-edge integration research. NSTX-U/LMCE will leverage the ability to generate very high divertor perpendicular heat flux q⊥ ~ 100MW/m 2 , extensive diagnostics, and liquid-metal-applicable infrastructure of NSTX-U. NSTX-U/LMCE will provide access to a high-confinement plasma core with majority self-driven plasma current, the flexibility to test a range of liquid metal divertor concepts, access to a range of separatrix collisionalities (from high to very low), and the ability to controllably vary the first-wall temperature to vary the plasma- wall interaction physics on liquid lithium components. Further, NSTX-U/LMCE will utilize more reactor-relevant high-Z refractory-metal PFC substrates. With these capabilities the NSTX-U/LMCE facility will explore the full continuum of core-edge solutions ranging from high core radiated power, to conditions with radiative losses concentrated in the scrape-off layer (SOL), and ultimately low recycling conditions. The low collisionality SOL that may be accessible in the low recycling regime is relatively unexplored and will require a kinetic treatment of the edge, which can be addressed theoretically, and with experiments in LTX-β. Additional smaller-scale preparatory R&D facilities will be required to reduce the risk of premature technical/engineering failure of liquid metal systems implemented in NSTX-U. The NSTX-U/LMCE facility aligns very well with recommendations in the FESAC Long-Range Plan and NASEM Pilot Plant reports and the Bold Decadal Vision, will be unique in the world program throughout the next decade, and is garnering private company interest in utilizing NSTX-U/LMCE for development of LM PFCs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Description of FY25 Theory and Simulation Performance Target: Development of an integrated modeling framework for fusion reactor design and assessment

The urgency to deliver fusion power is growing now more than ever, with increasing pressure for both public programs and private companies to meet milestones timelines and overcome significant remaining technical challenges to ensure growth of a nascent fusion industry in time to meet rapidly growing clean energy demands. With incredible advancements in computation and years of investment in fusion model development and validation, integrated modeling is poised to fill a key role in accelerating the timeline to a fusion pilot plant (FPP). Future fusion pilot plants will operate in regimes far beyond current experience, and device design will rely on physics-based prediction and extrapolation. Many concepts will also rely on simulation to assess safety (shielding, tritium management, materials activation and lifetimes), economics and scalability before the decision to build. Importantly, integrated simulation can be used to reveal and solve the complexities of system integration that may otherwise not be apparent in physical components or models developed in isolation. New experimental test facilities that produce relevant conditions to validate and resolve key technical challenges for various subsystems (materials, blankets, fuel cycle, etc.) have been repeatedly called for by the fusion community but are not yet realized. Integrated modeling has an important role in identifying realistic load conditions (thermal, electromagnetic, plasma, neutron and photon loads, etc.) and defining the components and experiments for these test facilities in order to ensure meaningful validation that sufficiently reduces modeling uncertainties and technical risk for the full integrated reactor. The Fusion REactor Design and Assessment (FREDA) SciDAC project is building a component-based integrated modeling framework & data structure to enable self-consistent, multi-fidelity, iterative optimization workflows for the fusion reactor design process. FREDA aims to shorten the time to viable designs by providing a set of flexible workflows to support the various stages of the design process using an integrated model hierarchy, ranging from the simple analytic descriptions to the highest fidelity, theory-based plasma and engineering modeling developed by the fusion and fission communities. These tools are expected to be needed for timely support of FPP design in the milestone program and in the FIRE collaboratives. The plasma simulation backbone of FREDA is IPS-FASTRAN with newly developed coupled Core-Edge Pedestal-SOL (CESOL) workflows, which is being extended to the far-SOL region up to the plasma facing components. FREDA incorporates the FERMI engineering modeling suite and will enable self-consistent evaluation of the thermal shields, limiters, blanket, magnets, and other surrounding structures with predictions of temperatures, erosion, dpa, activation, tritium generation and transport, creep, corrosion, material degradation, etc. Parametric generation of 3D CAD enables rapid iteration of component geometry in response to plasma and loading specifications.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2026

Final Technical Report - Center for Simulation of Fusion Relevant RF Actuators

We have developed a suite of 3D electromagnetic field solvers, both FEM and FDTD based, that account for the RF antenna and vacuum vessel geometries with unprecedented accuracy. Workflows were developed that make it possible to translate CAD models for the antenna and vacuum vessel to physics meshes for RF wave simulation. Nonlinear RF sheath formation has been incorporated self-consistently as a boundary condition in these solvers. We have also carried out extensive studies of the impact of RF sheaths on the ion energy angle distribution at plasma-material interfaces, using high fidelity particle-in-cell codes. Comprehensive simulation models were developed to assess the impact of blob-like edge turbulence on RF wave propagation and the impact of the RF ponderomotive force on the plasma scrape-off layer (SOL). A fluid transport solver for the far-SOL was also developed which accounts for the high parallel to perpendicular heat anisotropy on an unstructured mesh, thus making it possible to precisely represent an antenna structure in the presence of edge transport. Finally we have developed a hierarchy of core wave propagation and absorption models that self-consistently combine continuum Fokker Planck and Monte Carlo treatments of fast ion evolution with ICRF full-wave field solvers and continuum Fokker Planck treatments of fast electron evolution with both full-wave and ray tracing models.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

The Dopamine Assisted Synthesis of MoO3/Carbon Electrodes With Enhanced Capacitance in Aqueous Electrolyte

A capacitance increase phenomenon is observed for MoO 3 electrodes synthesized via a sol-gel process in the presence of dopamine hydrochloride (Dopa HCl) as compared to α-MoO 3 electrodes in 5M ZnCl 2 aqueous electrolyte. The synthesis approach is based on a hydrogen peroxide-initiated sol-gel reaction to which the Dopa HCl is added. The powder precursor (Dopa) x MoO y , is isolated from the metastable gel using freeze-drying. Hydrothermal treatment (HT) of the precursor results in the formation of MoO 3 accompanied by carbonization of the organic molecules; designated as HT-MoO 3 /C. HT of the precipitate formed in the absence of dopamine in the reaction produced α-MoO 3 , which was used as a reference material in this study (α-MoO 3 -ref). Scanning electron microscopy (SEM) images show a nanobelt morphology for both HT-MoO 3 /C and α-MoO 3 -ref powders, but with distinct differences in the shape of the nanobelts. The presence of carbonaceous content in the structure of HT-MoO 3 /C is confirmed by FTIR and Raman spectroscopy measurements. X-ray diffraction (XRD) and Rietveld refinement analysis demonstrate the presence of α-MoO 3 and h-MoO 3 phases in the structure of HT-MoO 3 /C. The increased specific capacitance delivered by the HT-MoO 3 /C electrode as compared to the α-MoO 3 -ref electrode in 5M ZnCl 2 electrolyte in a −0.25–0.70 V vs. Ag/AgCl potential window triggered a more detailed study in an expanded potential window. In the 5M ZnCl 2 electrolyte at a scan rate of 2 mV s −1 , the HT-MoO 3 /C electrode shows a second cycle capacitance of 347.6 F g −1 . The higher electrochemical performance of the HT-MoO 3 /C electrode can be attributed to the presence of carbon in its structure, which can facilitate electron transport. Our study provides a new route for further development of metal oxides for energy storage applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Effect of sintering temperature on adhesion of spray-on piezoelectric transducers

Conventionally sol-gel spray-on transducers require a high-temperature (> 700 ◦C) sintering process; however, this process can affect the microstructure of the substrate material. For mechanical elbows and valves utilized for fluid transport in the energy sector, the components are designed to have a specific microstructure, and deviations from these specifications can create weak points in the system. For this reason it is important to investigate how the temperature of the deposition process affects the substrate. This paper investigates the effect of high-temperature and low-temperature (< 150 ◦C) processing conditions on the surface composition of the substrate. Furthermore, the resultant transducers from high- and low-temperature fabrication processes are compared to determine if a low-temperature processing method is feasible. For these studies a sol-gel spray-on process is employed to deposit piezoelectric ceramics onto a stainless-steel 316L substrate. Energy-dispersive X-ray spectroscopy is utilized to determine the composition of the substrate surface before and after transducer deposition. Results indicate that the high-temperature processing conditions may alter the surface composition of the metal due to a diffusion of the metal into the ceramic, which results in a metal surface that is bonded to the ceramic. Furthermore, it is shown that low-temperature processing of spray-on transducers is a viable method for transducer fabrication where the resultant transducers meet the industry minimum requirement of 30 dB signalto-noise ratio. In parallel simulation calculations, finite-element method (FEM) studies were performed to model the adhesive strength of the low-temperature processed transducer to the substrate surface. Comparisons between the simulations and experiments suggest that the bond strength is much greater than the commercial gel bonds and closer to hardened epoxy glue bonds. These results indicate that spray-on transducers fabricated under lowtemperature processing conditions are a viable solution for leave-in-place monitoring of structures.

M. Sinding, Kyle↗

DOE OSTI2022

Suppression of first-wall interaction in negative triangularity plasmas on TCV

Magnetically confined fusion plasmas with negative triangularity (d) exhibit greater L-mode confinement than with positive d. Recent experiments in the TCV and DIII-D tokamaks have correlated the confinement improvement to a reduction of fluctuations within the plasma core. We report on fluctuation measurements in the scrape-off layer (SOL) for −0.61 < d < +0.64 in limited and diverted ohmic L-mode plasmas; these reveal a strong reduction in SOL fluctuation amplitudes at d < −0.25, and, surprisingly, an almost full suppression of plasma interaction with the main-chamber first-wall, which could have important implications for the prospects of using negative d plasmas as a reactor solution. An exploration of several physical mechanisms suggests that a reduced connection length—intrinsic to negative d plasmas—plays a critical role in the origin of this phenomenon.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

Overview of the TCV tokamak program: Scientific progress and facility upgrades

The TCV tokamak is augmenting its unique historical capabilities (strong shaping, strong electron heating) with ion heating, additional electron heating compatible with high densities, and variable divertor geometry, in a multifaceted upgrade program designed to broaden its operational range without sacrificing its fundamental flexibility. The TCV program is rooted in a three-pronged approach aimed at ITER support, explorations towards DEMO, and fundamental research. A 1 MW, tangential neutral beam injector (NBI) was recently installed and promptly extended the TCV parameter range, with record ion temperatures and toroidal rotation velocities and measurable neutral-beam current drive. ITER-relevant scenario development has received particular attention, with strategies aimed at maximizing performance through optimized discharge trajectories to avoid MHD instabilities, such as peeling-ballooning and neoclassical tearing modes. Experiments on exhaust physics have focused particularly on detachment, a necessary step to a DEMO reactor, in a comprehensive set of conventional and advanced divertor concepts. The specific theoretical prediction of an enhanced radiation region between the two X-points in the low-field-side snowflake-minus configuration was experimentally confirmed. Fundamental investigations of the power decay length in the scrape-off layer (SOL) are progressing rapidly, again in widely varying configurations and in both D and He plasmas; in particular, the double decay length in L-mode limited plasmas was found to be replaced by a single length at high SOL resistivity. Experiments on disruption mitigation by massive gas injection and electron-cyclotron resonance heating (ECRH) have begun in earnest, in parallel with studies of runaway electron generation and control, in both stable and disruptive conditions; a quiescent runaway beam carrying the entire electrical current appears to develop in some cases. Developments in plasma control have benefited from progress in individual controller design and have evolved steadily towards controller integration, mostly within an environment supervised by a tokamak profile control simulator. TCV has demonstrated effective wall conditioning with ECRH in He in support of the preparations for JT-60SA operation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NASA NTRS1967

A ceramic composite thermal insulation

Ceramic composite thermal insulation comprised of alumina-silica fibers, pigmentary potassium titanate, and asbestos fibers, bonded with a colloidal silica sol has improved insulating capabilities to both radiant and convective heat. Gelation of the colloidal silica sol prevents binder migration.

Source record↗

NASA NTRS1976

The environs of Viking 2 lander

Forty-six days after Viking 1 landed, Viking 2 landed in Utopia Planitia, about 6500 kilometers away from the landing site of Viking 1. Images show that in the immediate vicinity of the Viking 2 landing site the surface is covered with rocks, some of which are partially buried, and fine-grained materials. The surface sampler, the lander cameras, engineering sensors, and some data from the other lander experiments were used to investigate the properties of the surface. Lander 2 has a more homogeneous surface, more coarse-grained material, an extensive crust, small rocks or clods which seem to be difficult to collect, and more extensive erosion by the retroengine exhaust gases than lander 1. A report on the physical properties of the Martian surface based on data obtained through sol 58 on Viking 2 and a brief description of activities on Viking 1 after sol 36 are given.

Shorthill, R. W.↗

NASA NTRS1977

Recent results from the Viking Labeled Release experiment on Mars

The Labeled Release (LR) life detection experiment seeks detection of heterotrophic metabolism by monitoring radio-active gas evolution following the addition of a radioactive nutrient containing seven C-14 labeled organic substrates to surface material. LR results obtained on Mars prior to conjunction showed rapid evolution of radioactive counts upon addition of the nutrient to a fresh surface sample. The responses at both landing sites were quite similar. The additional results summarized in the present paper provide further information on the gas kinetics following a second injection of nutrient and on the effect of 'cold sterilization' of the Martian surface material. Specifically, it is shown that the production of gas from the LR nutrient is remarkably uniform; after reaction approaches completion, addition of more nutrient results in a net loss of the radioactive gas; the reactant in the Mars soil is completely inhibited by heating the soil to 160 C, and is largely inhibited by heating to 46 C. In contrast, exposure to 18 C for 2 sol (1 sol = 24.6 hr) does not appear to inhibit the reaction.

Levin, G. V.↗

NASA NTRS1978

Mars meteorology - Three seasons at the surface

We summarize some meteorological results from Viking for northern summer, autumn and winter. Little Sol-to-Sol meteorological change was observed during summer, except for secular pressure change. However, a regular sequence of weather disturbances, interpreted as baroclinic waves, appeared primarily at VL-2 during autumn and winter. The number of Rossby waves present at a given instant is calculated to be 4 and 6 for these seasons. The extreme regularity and low wave number make these systems closely resemble the baroclinic waves of rotating annulus experiments.

Ryan, J. A.↗

NASA NTRS1978

Dynamics of the boundary layer of Mars

Measurements of daily average atmospheric pressure fluctuations at near-tropical and mid-latitude sites on the Martian northern hemisphere are analyzed with respect to their relation to seasonal and shorter period processes. The variability of the sol (Martian day) mean pressure at the mid-latitude site is five times the variability at the near-tropical site during the fall season. Variations in atmospheric dust result in more pronounced effects in the diurnal and semidiurnal pressure components, and at the southern rather than the northern site, due to the origin of most of the dust in the southern hemisphere during this season. Periods on the order of 3 to 4 sols, similar to terrestrial synoptic periods, appear at both sites, with a sharper spectrum at the northern site.

Tillman, J. E.↗

NASA NTRS1978

Discrete events at Viking-2 Mars site, northern summer

The Viking-2 Mars Lander landed at 48 deg N 226 deg W, northern summer. During the summer period the wind vector exhibited a repetitive clockwise turning with a period of one Sol (Mars day). Occasionally, however, the rotation ceased and wind became principally northeasterly. These events were always multiples of a Sol in duration, and all began around local midnight. The exact reason for this behavior is not clear, but it is suggested that small variations in the strength of the global circulation may be responsible.

Goepel, J.↗

NASA NTRS1979

Frontal systems during passage of the Martian north polar hood over the Viking Lander 2 site prior to the first 1977 dust storm

Analysis of a 12-sol period of wind speed, wind direction, temperature, pressure, and optical depth at the Viking Lander 2 site presents the first in situ evidence of high- and low-pressure systems, complete with fronts, on the surface of Mars. The discovery of these systems in the Lander data occurred while analyzing a period during which the north polar hood was advected over the site at midday, dramatically decreasing the surface illumination and surface-to-atmospheric heat flux. This obscuration immediately preceded a global dust storm in the southern hemisphere and low latitudes of the northern hemisphere. The direct effects of the dust storm, reached 48 N, the Lander 2 latitude, later more gradually than they reached the 22 deg N latitude of Lander 1. The system responsible for the polar hood passages is a major disturbance, and it appears that radiational damping is inadequate to stop strong frontal formation. The front analyzed is characteristic of a repetitive series of systems that pass roughly every 3.3 sols. These systems are similar to those predicted by theoretical analyses and by general circulation modeling of the Martian atmosphere and those observed in laboratory experiments.

Tillman, J. E.↗

NASA NTRS1981

Local Mars dust storm generation mechanism

On an areocentric solar longitude of 340 deg, first Mars year of Viking on the surface, a local dust storm was observed at the Viking Lander No. 1 site by Viking Orbiter A. The storm lasted less than one Martian day (sol) with the dust raised affecting the site for about three sols. It is concluded that this storm was caused by baroclinic waves and that the threshold wind speed for saltation was 25-30 m/sec.

Ryan, J. A.↗

NASA NTRS1984

Physiological changes in fast and slow muscle with simulated weightlessness

A rat hindlimb suspension model of simulated weightlessness was used to examine the physiological characteristics of skeletal muscle. The physiological sequelae of hindlimb suspension were compared to those of spinal cord section, denervation by sciatic nerve crush, and control. Muscle examined were the predominantly slow (Type 1) soleus (SOL) and the predominantly fast (Type 2) extensor digitorum longus (EDL). Two procedures which alter motor unit activity, hindlimb suspension and spinal cord section, produce changes in characteristics of skeletal muscles that are dependent upon fiber type. The SOL develops characteristics more representative of a fast muscle, including smaller Type 1 fiber proportion and higher AChE activity. The EDL, which is already predominantly fast, loses most of its few Type 1 fibers, thus also becoming faster. These data are in agreement with the studies in which rats experienced actual weightlessness.

Dettbarn, W. D.↗

NASA NTRS1984

Synthesis of polyamides from diamines of the fluorene series

Aromatic polyamides were prepared by polycondensation of isophthaloyl chloride and 2,7-diaminofluorene, 2,7-dimainofluorenone, or 2,5-diaminofluorenone in AcNMe2 or N-methyl-2-pyrrolidinone at 20 deg - 30 deg for 1.5-2 hr. Isophthaloyl chloride-2,5-diaminofluorenone copolymer 39609-29-51 was sol. in AcNMe2, N-methyl-2-pyrrolidinone, DMF, and hexamethylphosphoramide, whereas isophthaloyl chloride-2,7-diamino-fluorene copolymer 39609-30-3 and isophthaloyl chloride-2,7-diamino-fluorenone copolymer 39609-31-0 were not sol. in the solvents cited. The aromatic polyamides revealed thixotropic properties in 0.5% solutions in H2SO4.

Fedotova, O. Y.↗