Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SILICATE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Ion-specific effects influencing the dissolution of tricalcium silicate

It has been recently demonstrated that the dissolution kinetics of tricalcium silicate (C{sub 3}S) is driven by the deviation from its solubility equilibrium. In this article, special attention is paid to ions relevant in cement chemistry likely to interact with C{sub 3}S. In order to determine whether specific effects occur at the interface C{sub 3}S–water, particular efforts have been made to model ion activities using Pitzer's model. It has been found that monovalent cations and monovalent anions interact very little with the surface of C{sub 3}S. On the other side, divalent anions like sulfate slow down the dissolution more strongly by modifying the surface charging of C{sub 3}S. Third, aluminate ions covalently bind to surface silicate monomers and inhibit the dissolution in mildly alkaline conditions. The formation and the breaking of these bonds depend on pH and on [Ca{sup 2+}]. Thermodynamic calculations performed using DFT combined with the COSMO-RS solvation method support the experimental findings.

36 MATERIALS SCIENCE↗

Inorganic polymers from laterite using activation with phosphoric acid and alkaline sodium silicate solution: Mechanical and microstructural properties

Geopolymers from laterite, an iron-rich soil available in developing countries, have great potential as building materials. In this work, laterite from Togo (Africa) was used to prepare geopolymers using both phosphoric acid and alkaline sodium silicate solution. Microstructural properties were investigated by scanning electron microscopy, X-ray powder diffraction and mercury porosimetry, whereas thermal properties were evaluated by thermal analyses. The local environment of iron was studied by X-ray Absorption Spectroscopy (XANES region). The mechanical properties were determined. Modulus of Rupture and Young's modulus fell in the ranges 3.3–4.5 MPa and 12–33 GPa, respectively, rendering the materials good candidates for construction purposes. Heating above 900 °C results in weight-gain, presumably due to iron redox reactions. X-ray Absorption Spectroscopy data evidence changes in the chemical and structural environments of iron following thermal treatment of geopolymers. These changes indicate interaction between the geopolymer structure and iron during heating, possibly leading to redox properties. -- Highlights: •Geopolymerization of laterite is promising for fabrication of building materials. •Both phosphoric acid and alkaline sodium silicate solution can be used for activation. •Thermally activated redox properties of the inorganic polymers were observed.

36 MATERIALS SCIENCE↗

Crystal structure of magnesium silicate hydrates (M-S-H): The relation with 2:1 Mg–Si phyllosilicates

Two magnesium silicate hydrates (M-S-H) with structural magnesium/silicon ratios of 0.57 ± 0.08 and 1.07 ± 0.13 were synthesized at room temperature, with one year of synthesis duration. Their structure was clarified by considering results from X-ray diffraction, TEM, {sup 29}Si MAS NMR spectroscopy, TGA, and EPMA. A modeling approach appropriate to defective minerals was used because usual XRD refinement techniques cannot be used in the case of turbostratic samples, where coherency between successive layers is lost. M-S-H with Mg/Si ratio of ~ 0.6 appears to be structurally close to nanocrystalline turbostratic 2:1 Mg–Si phyllosilicates. The increase of the Mg/Si ratio from 0.6 to 1.2 occurs by increasing the occurrence of defects in the silicate plan. The layer-to-layer distance evolves from 9.46 Å to 14 Å under air-dried and ethylene glycol conditions, respectively. Crystallites have a mean size of 1.5 nm in the ab plane, and 2.4 nm along c*.

36 MATERIALS SCIENCE↗

Use of micro-reactors to obtain new insights into the factors influencing tricalcium silicate dissolution

A micro-reactor approach, developed previously, is used to study the early dissolution of tricalcium silicate. This approach uses micron-sized gaps mimicking particles in close contact to understand dissolution, nucleation, and growth processes. The main factors influencing the dissolution kinetics of tricalcium silicate are presented. We show that the presence of defects caused by polishing does not affect the extent of dissolution. A strong effect of aluminum in solution reducing the extent of dissolution is however identified. This effect is highly dependent on the pH, and is much lower above pH 13. We show also that superplasticizers reduce the extent of dissolution; however, the exact reason for this effect is not clear.

36 MATERIALS SCIENCE↗

Early reactivity of sodium silicate-activated slag pastes and its impact on rheological properties

The fast loss of fluidity of sodium silicate-activated slag (SS-AAS) systems have been widely studied in the literature. In this study, the rheology of these cements has been correlated with the evolution of the reaction products formed over time. For this purpose, a combination of experimental characterization techniques, to study the pore solution composition and microstructure of SS-AAS pastes and thermodynamic calculations have been applied. The initial precipitation of ill-defined N-A-S-H and C-N-A-S-H producta leads to a fast increase of the storage modulus after 40 min of reaction. These products are formed from the reaction of the Na{sup +} ions and silicate ions of the activator with the Ca{sup 2+} and aluminate species dissolved from the slag. However, when a shear is applied, the structure breaks down and fluidity is recovered, that infers that the attractive forces between the particles are low at the early stages of hydration.

36 MATERIALS SCIENCE↗

Effects of alkali dosage and silicate modulus on autogenous shrinkage of alkali-activated slag cement paste

Autogenous shrinkage of alkali-activated slag cement (AASC) paste prepared with different levels of alkali dosage and silicate modulus (M{sub s}) is investigated. The results show that autogenous shrinkage of AASC paste increases at a decreasing rate with alkali dosage, which is attributed to enhanced capillary pore pressure and syneresis of C-A-S-H gels. Autogenous shrinkage of AASC paste with a constant alkali dosage increases as M{sub s} increases from 0.5 to 1.0, followed with a reduction as M{sub s} further increases to 2.0. Increasing M{sub s} initially enhances the capillary pore pressure due to the enhanced reaction degree, and promotes the formation of saturated capillary pores and viscoelasticity, which facilitates the autogenous shrinkage of AASC paste. However, excessive silicate in the activator retards the internal moisture consumption, and subsequently decreases the autogenous shrinkage of AASC paste. Furthermore, increasing M{sub s} can also intensify syneresis of C-A-S-H gels, contributing to the early-age autogenous shrinkage of AASC paste.

36 MATERIALS SCIENCE↗

Strain hardening magnesium-silicate-hydrate composites (SHMSHC) reinforced with short and randomly oriented polyvinyl alcohol microfibers

Magnesium-silicate-hydrate (M-S-H) cement has emerged as an alternative binder with potentially lower energy requirements and emissions. Due to the intrinsically low pH values of its matrix, however, normal steel reinforcement is not appropriate for M-S-H system. To toughen the matrix and to overcome the brittle nature of the material, a new strain hardening magnesium-silicate-hydrate composite (SHMSHC) is developed for the first time by incorporating 2 vol% short and randomly oriented polyvinyl alcohol (PVA) microfibers. The resulting SHMSHC exhibits significant strain hardening with a tensile strain capacity of more than 3%, a compressive strength beyond 50 MPa and a tensile strength of around 3 MPa. Remarkably, saturated multiple cracking with a tight crack width less than 10 μm invisible to the human naked eyes was observed. The newly developed SHMSHC addresses the fundamental challenge of M-S-H binder and is expected to widen possible application areas of M-S-H system.

36 MATERIALS SCIENCE↗

Ion irradiation study of lithium silicates for fusion blanket applications

Here, this study reports on the microstructural and compositional evolutions, deuterium release and lithium loss behavior in lithium silicates. Pellets of biphasic Li 4 SiO 4 and Li 2 SiO 3 were fabricated using hot pressing of powders. Sequential irradiation with Si + , He + and D + ions was performed up to 773 K to emulate one-year 6 Li burnup in 6 Li 4 SiO 4 inside the SlimCS DEMO. Crystalline Li 4 SiO 4 phase was not observed in the irradiated depth region of all the samples in this study. In spite of full amorphization in the near-surface region, Li 2 SiO 3 irradiated to a high dose at 773 K remained crystalline in the damage peak region, suggesting that Li 2 SiO 3 is more irradiation resistant to amorphization than Li 4 SiO 4 . Radiolysis may be primarily responsible for silicate decomposition and amorphization. Data from this study also show that D release from the pellet is very efficient during ion irradiation at 773 K, which is accompanied with a significant Li loss. Thermal annealing for 10 min at 773 K for the room-temperature irradiated pellet leads to a nearly complete D release without an observable Li loss. A concept of Ni coating on tritium breeder materials is discussed with supporting data to minimize Li loss without a significant impact on tritium diffusion and release.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Computerized crystal-chemical classification of silicates and related materials with CRYSTANA and formula notation for classified structures

The computer program CRYSTANA is described which implements a method for the crystal-chemical classification of silicates and related materials. This method is mainly based upon the topological structure of the connected units of a compound and can be applied when the units are built from tetrahedra as coordination polyhedra. The classification parameters and the rules which have to be applied for their determination are summarized and a formalization of the method is provided based upon a finite graph representation of the units. A description of how CRYSTANA can be used and which kind of output it produces is included. From this output crystal-chemical formulas can be derived, which differ slightly from an existing notation in order to meet recommendations of the International Union of Crystallography. - The computer program CRYSTANA is described which implements a method for the crystal-chemical classification of silicates and related materials. The implementation is based upon a graph-theoretical formalization of the classification method. An extended notation of crystal-chemical formulas is introduced. The formulas can be derived from the output of the program.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Antimony and silicon environments in antimony silicate glasses

Antimony silicate glasses, of general formula xSb{sub 2}O{sub 3}.(1-x)SiO{sub 2} (0.1{<=}x{<=}0.78), have been prepared by melt-quenching and their structures studied using {sup 29}Si MAS NMR spectroscopy, {sup 121}Sb Moessbauer spectroscopy and Raman spectroscopy. Oxidation during melting gives rise to Sb{sup 5+} in concentrations, which increase linearly with x to give a value of {approx}10% when x=0.78. {sup 121}Sb Moessbauer spectra show Moessbauer shifts and quadrupole splittings consistent with Sb{sup 3+} in a [:SbO{sub 3}] trigonal pyramid, similar to that in crystalline Sb{sub 2}O{sub 3}. A broad band in the Raman spectrum at {approx}410 cm{sup -1} is due to the vibrations of such a unit. The dependence of the silicon Q{sup n} speciation on x can be interpreted by the formation of Sb-O-Sb links possibly to form rings of 4 [:SbO{sub 3}] units such as are found in valentinite. - Graphical abstract: Antimony silicate glasses have been shown to contain Sb{sup 3+} in [:SbO{sub 3}] trigonal pyramid units using {sup 121}Sb Moessbauer spectroscopy and Raman spectroscopy. {sup 29}Si magic-angle-spinning NMR has shown silicon Q{sup n} speciation which can be interpreted as formation of rings of 4 [:SbO{sub 3}] units such as are found in valentinite.

36 MATERIALS SCIENCE↗

Color-control of the persistent luminescence of cadmium silicate doped with transition metals

The structural and optical characterization of cadmium silicate (CdSiO{sub 3}) doped with transition metals is reported. This crystalline system presents intrinsic luminescence and is usually studied as host matrix for rare earth ions. In this work, CdSiO{sub 3} was doped with Mn, Ni and Cr to produce multicolored luminescent materials. Single crystalline CdSiO{sub 3} was obtained via solid state synthesis at 1000 °C/8 h. The valence of the dopants inserted in the host matrix was determined via XANES as 3+ for Cr, 2+ for Ni and both 2+ and 3+ for Mn, according to XANES studies. The optical absorption spectra of the samples presented wide bands in the visible region that were associated with the internal transitions of the dopants. All the samples presented photoluminescent bands near 420 nm, 496 nm and 591 nm, with different relative intensities that yield characteristic luminescence colors ranging from blue to red. - Graphical abstract: Phosphorescence of cadmium silicate doped with transition metals: nature of defects and possible luminescent channels. Highlights: ► CdSiO{sub 3} was doped with Mn, Ni and Cr to produce multicolored phosphors. ► Valence of the dopants was determined as 3+ for Cr, 2+ for Ni and 2+ and 3+ for Mn. ► The presence of absorption bands in the visible region led to self-absorption. ► Self-absorption in some cases can decrease the light output. ► Luminescent channels were created and related to internal transitions of the dopants.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and stability of {alpha}-tricalcium phosphate doped with dicalcium silicate in the system Ca{sub 3}(PO{sub 4}){sub 2}-Ca{sub 2}SiO{sub 4}

The aim of this study was to synthesize materials of {alpha}-tricalcium phosphate doped with small amounts of dicalcium silicate, by solid state reaction, at high temperature and slow cooling to room temperature. The obtained materials were characterized by X-ray diffraction, Scanning Electron Microscopy and Fourier Transform Infrared Spectroscopy, showing that there is a region between 0.5 and 4.0 wt.% of dicalcium silicate where solid solution {alpha}-tricalcium phosphate ({alpha}-TCPss) is stable to room temperature.

36 MATERIALS SCIENCE↗

Coherent diffraction study of calcite crystallization during the hydration of tricalcium silicate

The aim of this work is using Bragg coherent X-ray diffraction imaging (BCDI) to study the calcite crystallization during carbonation of hydrated tricalcium silicate (C 3 S). Portland cement is a very complex synthesized product whose 50–70% mass is composed of C 3 S, which is the most important phase to produce calcium silicate hydrates and calcium hydroxide. Hence, its hydration contributes greatly to the hydration of cement and later to the carbonation of cement products when it reacts with CO 2 , often from the air, to form calcium carbonates. BCDI has emerged in the last decade as a promising high-resolution lens-less imaging approach for characterization of various samples. It has made significant progress with the development of X-ray sources and phase-retrieval algorithms. BCDI allows for imaging the whole three-dimensional structure of micro- and sub-micro- crystalline materials and can show the strain distribution at the nanometer spatial resolution. Finally, results show that calcite crystallization follows a through-solution reaction and the growth model of the calcite crystal can be explained by using “phase domain” theory. In conclusion, during carbonation, calcite crystals grow by increasing the number of phase domains within them while the domain size remains at about 200–300 nm.

36 MATERIALS SCIENCE↗

Electrical properties and thermal expansion of cobalt doped apatite-type lanthanum silicates based electrolytes for IT-SOFC

Graphical abstract: The figure shows the dependence of conductivity on the Co content. It can be seen that La{sub 10}Si{sub 5.2}Co{sub 0.8}O{sub 26.6} exhibits the highest ionic conductivity of 3.33 Multiplication-Sign 10{sup -2} S/cm at 800 Degree-Sign C. When x {<=} 0.8, as doping Co weakens the binding energy and aids the migration of the interstitial oxide ions, the ionic conductivity improves. On the other hand, excess dopant of Co (0.8 < x {<=} 1.5) can decrease the number of interstitial oxide ions and reduce the ionic conductivity. Highlights: Black-Right-Pointing-Pointer The unit volumes of La{sub 10}Si{sub 6-x}Co{sub x}O{sub 27-x/2} increase with increasing cobalt content. Black-Right-Pointing-Pointer Doping Co can increase the thermal expansion because of the larger radius of Co{sup 3+} ion. Black-Right-Pointing-Pointer Conductivities of La{sub 10}Si{sub 6-x}Co{sub x}O{sub 27-x/2} first increase and then decrease with cobalt content. Black-Right-Pointing-Pointer Above 550 Degree-Sign C, La{sub 10}Si{sub 6-x}Co{sub x}O{sub 27-x/2} shows low activation energies of around 0.7 eV. -- Abstract: The thermal expansion and conductivities have been investigated for Co{sup 3+} doped lanthanum silicates. The apatite-type lanthanum silicates with formula La{sub 10}Si{sub 6-x}Co{sub x}O{sub 27-x/2} (x = 0.2, 0.4, 0.6, 0.8, 1.0, 1.5) were synthesized by sol-gel process. The thermal expansion coefficient (TEC) of La{sub 10}Si{sub 6-x}Co{sub x}O{sub 27-x/2} was improved with increasing cobalt content because of the lower valence and larger radius of Co{sup 3+} ion compared to Si{sup 4+}. Analysis of AC impedance spectroscopy showed that conductivity increased first and then decreased with increasing cobalt content. There is an optimum doping amount of cobalt and La{sub 10}Si{sub 5.2}Co{sub 0.8}O{sub 26.6} exhibits the highest conductivity of 3.33 Multiplication-Sign 10{sup -2} S/cm at 800 Degree-Sign C. When x {<=} 0.8, the local distortion caused by doping with Co{sup 3+} can significantly affect the oxygen channels and assist the migration of the interstitial oxide ions, resulting in the improvement of ionic conductivity. However, excess Co{sup 3+} dopant (0.8 < x {<=} 1.5) reduced the number of interstitial oxide ions and decreased the conductivity.

36 MATERIALS SCIENCE↗

A self-activated silicate phosphor of Na{sub 5}YZrSi{sub 6}O{sub 18}

Graphical abstract: Self-activated Na{sub 5}YZrSi{sub 6}O{sub 18} shows a bright green luminescence. It presents obvious LLP afterglow with duration time >3 h after the removal of excitation. The substitution of Y{sup 3+} by rare earth ions except Yb{sup 3+} cannot prolong the afterglow. It is proposed that the disorder in the lattices can result in different trap centers attributing to the long last phosphorescence. - Highlights: • Na{sub 5}YZrSi{sub 6}O{sub 18} was firstly developed to be a new bluish green-emitting silicate. • Na{sub 5}YZrSi{sub 6}O{sub 18} presents unusual properties: efficient excitation and longer emission wavelength. • Na{sub 5}YZrSi{sub 6}O{sub 18} shows long-lasting phosphorescence with duration time above 3 h. - Abstract: A new self-activated silicate phosphor of Na{sub 5}YZrSi{sub 6}O{sub 18} was prepared by a solid-state reaction method. The phase formation was confirmed by X-ray powder diffraction measurement. The photoluminescence excitation and emission spectra, X-ray-excited luminescence, decay curves, quantum efficiencies and the color coordinates were investigated. It can be efficiently excited by UV light and X-ray and presents unusual green emission (centered at 475 nm) from Zr{sup 4+} to O{sup 2−} charge transfer transition. Meanwhile, the phosphor shows long-lasting phosphorescence with duration time above 3 h after the removal of excitation. The afterglow curves and thermo-luminescence were measured for pure and rare earth ions (RE = Yb, Er, Ho, Dy, Tb, Sm, Nd) doped Na{sub 5}YZrSi{sub 6}O{sub 18}. The possible defects and the mechanism of long-lasting phosphorescence were suggested on the base of the strong disorder of the multiply cation sites in the lattices.

36 MATERIALS SCIENCE↗

Luminescence properties of Eu-activated alkaline and alkaline-earth silicate Na{sub 2}Ca{sub 3}Si{sub 6}O{sub 16}

Highlights: • A novel yellow-emitting alkaline and alkaline-earth silicate Na{sub 2}Ca{sub 3}Si{sub 6}O{sub 16}:Eu{sup 2+} was first developed. • Under excitation with UV or near UV light the silicate presents broad emission band centered at 580 nm. - Abstract: Yellow-emitting phosphors of Na{sub 2}Ca{sub 3}Si{sub 6}O{sub 16}:Eu{sup 2+} was prepared by wet chemistry sol–gel method. X-ray powder diffraction and SEM measurements were applied to characterize the structure and morphology, respectively. The luminescence properties were investigated by the photoluminescence excitation and emission spectra, decay curve (lifetimes), CIE coordinates and the internal quantum efficiencies. The excitation spectra can match well with the emission light of near UV-LED chips (360–400 nm). Na{sub 2}Ca{sub 3}Si{sub 6}O{sub 16}:Eu{sup 2+} presents a symmetric emission band from 4f{sup 6}5d{sup 1} ⟶ 4f{sup 7}({sup 8}S{sub 7/2}) transitions of Eu{sup 2+} ions on doping below 3.0 mol%. On increasing Eu-doping levels, the sample contains two kinds of emission centers, i.e., Eu{sup 2+} and Eu{sup 3+} ions, which present the characteristic broad band (5d ⟶ 4f) and narrower (4f ⟶ 4f) luminescence lines, respectively. The energy transfer, the luminescence thermal stability (activation energy ΔE for thermal quenching) and luminescence mechanism of Na{sub 2}Ca{sub 3}Si{sub 6}O{sub 16}:Eu{sup 2+} phosphors were discussed by analyzing the relationship between the luminescence characteristics and the crystal structure.

36 MATERIALS SCIENCE↗

Synthesis of magnesiowüstite nanocrystallites embedded in an amorphous silicate matrix via low energy multiple ion implantations

The synthesis process is presented for experimentally simulating modifications in cosmic dust grains using sequential ion implantations or irradiations followed by thermal annealing. Cosmic silicate dust analogues were prepared via implantation of 20–80 keV Fe - , Mg - , and O - ions into commercially available p-type silicon (100)wafers. The as-implanted analogues are amorphous with a Mg/(Fe+Mg) ratio of 0.5 tailored to match theoretical abundances in circumstellar dusts. Before the ion implantations were performed, Monte-Carlo-based ion-solid interaction codes were used to model the dynamic redistribution of the implanted atoms in the silicon substrate. 600 keV helium ion irradiation was performed on one of the samples before thermal annealing. Two samples were thermally annealed at a temperature appropriate for an M-class stellar wind, 1000 K, for 8.3 h in a vacuum chamber with a pressure of 1 x 10 -7 torr. The elemental depth profiles were extracted utilizing Rutherford Backscattering Spectrometry (RBS) in the samples before and after thermal annealing. X-ray diffraction (XRD)analysis was employed for the identification of various phases in crystalline minerals in the annealed analogues. Transmission electron microscopy (TEM) analysis was utilized to identify specific crystal structures. RBS analysis shows redistribution of the implanted Fe, Mg, and O after thermal annealing due to incorporation into the crystal structures for each sample type. XRD patterns along with TEM analysis showed nanocrystalline Mg and Fe oxides with possible incorporation of additional silicate minerals.

79 ASTRONOMY AND ASTROPHYSICS↗

Tailored Nanocomposites of Polypropylene with Layered Silicates

The melt rheological properties of layered silicate nanocomposites with maleic anhydride (MA) functionalized polypropylene are contrasted to those based on ammonium-terminated polypropylene. While the MA functionalized PP based nanocomposites exhibit solid-like linear viscoelastic behavior, consistent with the formation of a long-lived percolated nanoparticle network, the single-end ammonium functionalized PP based nanocomposites demonstrated liquid-like behavior at comparable montmorillonite concentrations. The differences in the linear viscoelasticity are attributed to the presence of bridging interactions in MA functionalized nanocomposites. Further, the transient shear stress of the MA functionalized nanocomposites in start-up of steady shear is a function of the shear strain alone, and the steady shear response is consistent with that of non-Brownian systems. The weak dependence of the steady first normal stress difference on the steady shear stress suggests that the polymer chain mediated silicate network contributes to such unique flow behavior.

36 MATERIALS SCIENCE↗