Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SHADOW EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Method for the calculation of spacecraft umbra and penumbra shadow terminator points

A method for calculating orbital shadow terminator points is presented. The current method employs the use of an iterative process which is used for an accurate determination of shadow points. This calculation methodology is required since orbital perturbation effects can introduce large errors when a spacecraft orbits a planet in a high altitude and/or highly elliptical orbit. To compensate for the required iteration methodology, all reference frame change definitions and calculations are performed with quaternions. Quaternion algebra significantly reduces the computational time required for the accurate determination of shadow terminator points.

Ortizlongo, Carlos R.↗

Nanotoxicology ten years later: Lights and shadows

The mounting societal concerns about possible and maybe even likely adverse effects of nanomaterials are reflected in a large and growing number of publications in the field of nanotoxicology. Indeed, today's search in PubMed reveals > 3700 publications on the subject denoted by (toxic + nanomaterials) – quite a growth over the last decade that began with only two dozens of them up-to 2005. - Highlights: • Major factors of nanotoxicology • Key directions for research efforts • Global representation of the authorship.

60 APPLIED LIFE SCIENCES↗

3D ion gyro-orbit heat load predictions for NSTX-U

Abstract High power tokamaks operate with divertor heat loads capable of destroying the plasma facing components (PFCs). High fidelity heat load predictions are necessary to ascertain the PFC state for design and during operation. Typical heat flux calculations are 2D, time invariant, and assume that power flows directly along the magnetic field lines (the optical approximation). These assumptions neglect the complex 3D geometries employed to protect the PFCs, the time varying nature of the plasma and PFC thermal state, and the helical trajectories of ions with finite Larmor radii (the gyro-orbit approximation). An integrated software framework, the heat flux engineering analysis toolkit (HEAT), was developed to generate time varying optical heat loads applied to real engineering computer aided design (CAD) (Looby et al 2022 Fusion Sci. Technol. 78 10–27). Recently, an ion-gyro orbit module has been added to HEAT. This module calculates the helical trajectories of ions as they gyrate about the magnetic field lines using kinetic theory macro-particles to accelerate the calculation. First, the new gyro-orbit module will be presented. Next, a comparison to existing research is performed. Finally, an analysis of the gyro-orbit heat loads for NSTX-U is presented for diverted discharges using the engineering CAD models utilized for PFC fabrication. Including these gyro-orbit effects can enhance the PFC performance by ‘smearing’ out the magnetic shadows associated with the castellated fish-scaled geometry. Simultaneously, the helical trajectories can degrade performance when they load narrow regions on edges and corners with high heat fluxes. Analysis of the trade-offs between these competing effects is included, and regions for further investigation are identified.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electrodynamic Tether Operations beyond the Ionosphere in the Low-Density Magnetosphere

In the classical concept for the operation of electrodynamic tethers in space, a voltage is generated across the tether, either by the tether's orbital motion through the earth's planetary magnetic field or by a power supply; electrons are then collected from the ionospheric plasma at the positive pole; actively emitted back into space at the negative pole; and the circuit is closed by currents driven through the ambient conducting ionosphere. This concept has been proven to work in space by the Tethered Satellite System TSS-1 and TSS-1R Space Shuttle missions; and the Plasma Motor-Generator (PMG) tether flight experiment. However, it limits electrodynamic tether operations to the F-region of the ionosphere where the plasma density is sufficient to conduct the required currents--in other words, between altitudes of approximately 200 to 1000 km in sunlight. In the earth's shadow, the ionospheric density drops precipitously and tether operations, using the above approach, are not effective--even within this altitude range. There are numerous missions that require in-space propulsion in the Earth's shadow and/or outside of the above altitude range. This paper will, therefore, present the fundamentals of a concept that would allow electrodynamic tethers to operate almost anywhere within the magnetosphere, the region of space containing the earth's planetary magnetic field. In other words, because operations would be virtually independent of any ambient plasma, the range of electrodynamic operations would be extended into the earth's shadow and out to synchronous orbit--forty times the present operational range. The key to this concept is the active generation of plasma at each pole of the tether so that current generation ,does not depend on the conductivity of the ambient ionosphere. Arguments will be presented, based on ,existing flight data, which shed light on the behavior of charge emissions in space and show the plausibility of the concept.

Stone, Nobie H.↗

Diffraction on nuclei: Effects of nucleon correlations

The cross sections for a variety of diffractive processes in proton-nucleus scattering, associated with large gaps in rapidity, are calculated within an improved Glauber-Gribov theory, where the inelastic shadowing corrections are summed to all orders by employing the dipole representation. The effects of nucleon correlations, leading to a modification of the nuclear thickness function, are also taken into account. Numerical calculations are performed for the energies of the Hadron-Electron Ring Accelerator-B experiment, the Relativistic Heavy Ion Collider and Large Hadron Collider, and for several nuclei. It is found that whereas the Gribov corrections generally make nuclear matter more transparent, nucleon correlations act in the opposite direction and have important effects in various diffractive processes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear shadowing and prompt photons in hadronic collisions at ultrarelativistic energies

The production of prompt photons at high energies provides a direct probe of the dynamics of strong interactions. In particular, one expects that it could be used to constrain the behavior of the nuclear gluon distribution in pA and AA collisions. In this brief report, we investigate the influence of nuclear effects in the production of prompt photons and estimate the transverse momentum dependence of the nuclear ratios R{sub pA}=(d{sigma}(pA)/dy d{sup 2}p{sub T})/A(d{sigma}(pp)/dy d{sup 2}p{sub T}) and R{sub AA}=(d{sigma}(AA)/dy d{sup 2}p{sub T})/A{sup 2}(d{sigma}(pp)/dy d{sup 2}p{sub T}) at at energies currently available at the BNL Relativistic Heavy Ion Collider and CERN Large Hadron Collider. We demonstrate that the study of these observables can be useful in determining the magnitude of the shadowing and antishadowing effects in the nuclear gluon distribution.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Impact of Three-Dimensional Radiative Effects on Satellite Retrievals of Cloud Droplet Sizes

There are several dozen papers that study the effects of cloud horizontal inhomogeneity on the retrievals of cloud optical thickness, but only a few of them deal with cloud droplet sizes. This paper is one of the first comprehensive attempts to fill this gap: It takes a close theoretical look at the radiative effects of cloud 3-D structure in retrievals of droplet effective radii. Under some general assumptions, it was found that ignoring subpixel (unresolved) variability produces a negative bias in the retrieved effective radius, while ignoring cloud inhomogeneity at scales larger than a pixel scale (resolved variability), on the contrary, leads to overestimation of the domain average droplet size. The theoretical results are illustrated with examples from Large Eddy Simulations (LES) of cumulus (Cu) and stratocumulus (Sc) cloud fields. The analysis of cloud drop size distributions retrieved from both LES fields confirms that ignoring shadowing in 1-D retrievals results in substantial overestimation of effective radii which is more pronounced for broken Cu than for Sc clouds. Collocated measurements of broken Cu clouds by Moderate Resolution Imaging Spectrometer (MODIS) and Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) are used to check simulations and theory with observations. The analysis of ASTER and MODIS data and associated derived products recommends against blindly using retrieved effective radii for broken cloud fields, especially if one wants to relate aerosol amounts to cloud droplet sizes.

Marshak, Alexander↗

Sign problem of the fermionic shadow wave function

Here, we present a whole series of methods to alleviate the sign problem of the fermionic shadow wave function in the context of variational Monte Carlo. The effectiveness of our techniques is demonstrated on liquid 3 He. We found that although the variance is reduced, the gain in efficiency is restricted by the increased computational cost. Yet, this development not only extends the scope of the fermionic shadow wave function, but also facilitates highly accurate quantum Monte Carlo simulations previously thought not feasible.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Interactions of the plasma sheet with the lunar surface at the Apollo 14 site

Calculations of the magnetic shadow zones of lunar-based particle detectors are extended to include the effects of local remanent magnetic fields. At the Apollo 14 site, the local magnetic field is approximated as that of a dipole. Numerically calculated open and shadowed zones are shown to be in agreement with quiet-time plasma-sheet observations of the charged-particle lunar-environment experiment. An analysis of three storm-time observations indicates that magnetic shadowing can significantly alter the near-lunar-surface electrostatic potential distribution.

Reiff, P. H.↗

Number of collisions in the Glauber model and beyond

The so-called number of hadron-nucleus collisions n{sub coll}(b) at impact parameter b and its integral value N{sub coll}, which are used to normalize the measured fractional cross section of a hard process, are calculated within the Glauber-Gribov theory, including the effects of nucleon short-range correlations. The Gribov inelastic shadowing corrections are summed to all orders by employing the dipole representation. Numerical calculations are performed at the energies of the BNL Relativistic Heavy Ion Collider (RHIC) and CERN Large Hadron Collider (LHC). We found that whereas the Gribov corrections generally increase the value of N{sub coll}, the inclusion of nucleon correlations, acting in the opposite directions, decreases it by a comparable amount. The interplay of the two effects varies with the value of the impact parameter.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Some techniques for reducing the tower shadow of the DOE/NASA mod-0 wind turbine tower

Wind speed profile measurements to measure the effect of a wind turbine tower on the wind velocity are presented. Measurements were made in the wake of scale models of the tower and in the wake of certain full scale components to determine the magnitude of the speed reduction (tower shadow). Shadow abatement techniques tested on the towers included the removal of diagonals, replacement of diagonals and horizontals with round cross section members, installation of elliptical shapes on horizontal members, installation of airfoils on vertical members, and application of surface roughness to vertical members.

Burley, R. R.↗

Cold nuclear matter effects on J/{psi} production as constrained by deuteron-gold measurements at {radical}(s{sub NN})=200 GeV

We present a new analysis of J/{psi} production yields in deuteron-gold collisions at {radical}(s{sub NN})=200 GeV using data taken from the PHENIX experiment in 2003 and previously published in S. S. Adler et al. [Phys. Rev. Lett 96, 012304 (2006)]. The high statistics proton-proton J/{psi} data taken in 2005 are used to improve the baseline measurement and thus construct updated cold nuclear matter modification factors (R{sub dAu}). A suppression of J/{psi} in cold nuclear matter is observed as one goes forward in rapidity (in the deuteron-going direction), corresponding to a region more sensitive to initial-state low-x gluons in the gold nucleus. The measured nuclear modification factors are compared to theoretical calculations of nuclear shadowing to which a J/{psi} (or precursor) breakup cross section is added. Breakup cross sections of {sigma}{sub breakup}=2.8{sub -1.4}{sup +1.7} (2.2{sub -1.5}{sup +1.6}) mb are obtained by fitting these calculations to the data using two different models of nuclear shadowing. These breakup cross-section values are consistent within large uncertainties with the 4.2{+-}0.5 mb determined at lower collision energies. Projecting this range of cold nuclear matter effects to copper-copper and gold-gold collisions reveals that the current constraints are not sufficient to firmly quantify the additional hot nuclear matter effect.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Local Thermochemical Mechanisms in Direct Solar Graphite Synthesis from Methane

Methane pyrolysis is known to produce hydrogen and solid carbon in a variety of thermal processes. However, the generated carbon product typically belongs to a low-value amorphous type. Here, we elucidate the thermochemical mechanisms of a reaction that produces high-quality graphite via direct solar methane pyrolysis on a porous substrate. By comparing graphite deposition rates and local reaction zone temperatures of exposed and shadowed regions from the same experiment, we clarify the effects of thermolysis and photolysis in this emission-free process that both decarbonizes a fuel and produces a critical material for the sustainable energy transition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

QUASARS PROBING QUASARS. IV. JOINT CONSTRAINTS ON THE CIRCUMGALACTIC MEDIUM FROM ABSORPTION AND EMISSION

We have constructed a sample of 29 close projected quasar pairs where the background quasar spectrum reveals absorption from optically thick H I gas associated with the foreground quasar. These unique sightlines allow us to study the quasar circumgalactic medium (CGM) in absorption and emission simultaneously, because the background quasar pinpoints large concentrations of gas where Ly{alpha} emission, resulting from quasar-powered fluorescence, resonant Ly{alpha} scattering, and/or cooling radiation, is expected. A sensitive search (1{sigma} surface-brightness limits of SB{sub Ly{alpha}}{approx_equal}3 Multiplication-Sign 10{sup -18} erg s{sup -1} cm{sup -2} arcsec{sup -2}) for diffuse Ly{alpha} emission in the environments of the foreground (predominantly radio-quiet) quasars is conducted using Gemini/GMOS and Keck/LRIS slit spectroscopy. We fail to detect large-scale {approx}100 kpc Ly{alpha} emission, either at the location of the optically thick absorbers or in the foreground quasar halos, in all cases except a single system. We interpret these non-detections as evidence that the gas detected in absorption is shadowed from the quasar UV radiation due to obscuration effects, which are frequently invoked in unified models of active galactic nuclei. Small-scale R {approx}< 50 kpc extended Ly{alpha} nebulosities are detected in 34% of our sample, which are likely the high-redshift analogs of the extended emission-line regions (EELRs) commonly observed around low-redshift (z < 0.5) quasars. This may be fluorescent recombination radiation from a population of very dense clouds with a low covering fraction illuminated by the quasar. We also detect a compact high rest-frame equivalent width (W{sub Ly{alpha}} > 50 A) Ly{alpha}-emitter with luminosity L{sub Ly{alpha}} = 2.1 {+-} 0.32 Multiplication-Sign 10{sup 41} erg s{sup -1} at small impact parameter R = 134 kpc from one foreground quasar, and argue that it is more likely to result from quasar-powered fluorescence, than simply be a star-forming galaxy clustered around the quasar. Our observations imply that much deeper integrations with upcoming integral-field spectrometers such as MUSE and KCWI will be able to routinely detect a diffuse Ly{alpha} glow around bright quasars on scales R {approx} 100 kpc and thus directly image the CGM.

79 ASTRONOMY AND ASTROPHYSICS↗

Concentration of energy inside laser-irradiated gold and silver plasmon nanoparticles in air

We simulated laser-intensity distribution inside spherical gold and silver nanoparticles with radii between 10 and 100 nm, which are exposed to laser radiation at 400, 532, and 800 nm in air, and analyzed the results. The effect of high energy concentration inside illuminated (front) and shadowed (back) hemispheres of gold and silver nanoparticles is established for several nanoparticle sizes and laser wavelengths. The results can be used in nanophotonics of new plasmon devices (concentrators, antennas, etc.) and photon components.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Investigation and study of a multi-aperture antenna system final report, 1 jan. - 1 apr. 1964

This investigation was concerned with a multiple aperture adaptive antenna system for application to receiving telemetered data from remote space vehicles or satellites. The primary criterion for determining the feasibility of such a system has been economic considerations, but of necessity many physical constraints imposed on both a single antenna and a multiple aperture system have been evaluated. These include such factors as acquisition and combining of signals, look angle, shadowing, propagation influences system spatial bandwidth, collimation, interference, doppler effects, reliability, and noise. Specific conclusions have been made for a system operating at a frequency of 2 Gc, but the system model adopted allows quick evaluation at other frequencies. At a frequency of 2Gc, the crossover point between a single antenna or a multiple aperture configuration occurs for an 85 foot reflector. However this transition region is not critical. For lunar range communications a single antenna appears to be the most economical, whereas at interplanetary ranges aperture equivalents of around 400 feet are required and achieved by arraying eight 142 foot antennas.

TELEMETRY↗

Determination of stack plume properties from satellite imagery

LANDSAT imagery data were analyzed to determine the quantitative properties of a stack plume emitted from a moderate-sized pulp mill. Overlapping, consecutive-day MSS data provided plume/no plume radiances upwelling from the area of interest. These values from both the plume and its shadow were used to evaluate plume radius, height, particle concentration and scattering function, and total particle loading. Imagery data from a 10 by 10 km region in the vicinity of the mill were normalized to correct for minor atmospheric, solar and viewing angle changes for the two observation days, and cloud shadow data were used to evaluate sky radiance. The effects of the Sun angle, surface reflectance, SNR and spatial resolution are treated in the paper.

Staylor, W. F.↗

EXEP: Mountaintop Starshade Concept Study

Starshades are external occulters which would be used in conjunction with a space telescope. The starshade has a particular apodizing profile that effects strong suppression of starlight within the starshade’s shadow. Since starshades that would be used in space are large, typically 30 m diameter, performance is difficult to test on the ground at realistic scales. This paper examines the practical limits for testing starshades at smaller scales in the atmosphere and goes on to describe concepts for testing starshades using ground based telescopes and using starshades for astronomical observations.

Capps, R.↗