Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SCREENING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

A comparative study of two-electron systems with screened Coulomb potentials

Highlights: • A comparison criterion for screened potentials is conjectured for two-electron atoms. • The limits of validity of the correlation hypothesis are discussed. • Independent Hylleraas and Lagrange mesh calculations verify the comparison criterion. - Abstract: The relative ordering of energy levels is investigated for bound two-electron systems with potentials of the form V(r{sub 1},r{sub 2},r{sub 12})=Z(v(r{sub 1})+v(r{sub 2}))-v(r{sub 12}). Given the two one-body binding potentials v{sup (1)}(r) and v{sup (2)}(r), it is argued that if f(r)≡v{sup (1)}(r)-v{sup (2)}(r) is positive and monotonically decreasing upon increasing r then the corresponding eigenvalues of the two-electron Hamiltonians H{sub i}=-(1/2)(∇{sub 1}{sup 2}+∇{sub 2}{sup 2})+Z(v{sup (i)}(r{sub 1})+v{sup (i)}(r{sub 2}))-v{sup (i)}(r{sub 12}) , i=1,2are highly likely to be pairwise ordered, i.e., E{sub n}{sup (1)}≥E{sub n}{sup (2)}, n=1,2,…, where E{sub 1}{sup (i)}≤E{sub 2}{sup (i)}≤⋯≤E{sub k}{sup (i)}≤⋯ , for both i=1 and i=2. This conjecture certainly holds at sufficiently large Z. The range of n may be finite or infinite, depending on the nature of the potentials. In fact, the range of values of n for v{sup (1)}(r) may be shorter than that of v{sup (2)}(r) (which is more binding). The one-electron potentials specifically considered are: v(r)={ v_C(r) =-(1/r) Coulomb v_D(r) =-(1/r)exp(-λr) Debye (Yukawa) v_H_u(r) =-(λ/(exp(λr)-1)) Hulthén v_E_C_S_C(r) =-(1/r)exp(-λr)cos(λr) ECSC}{sup ∗} , ){sup ∗}Exponential-Cosine-Screened-Coulomb where λ is the screening parameter. For each of the λ-dependent potentials we compare one- and two-electron spectra corresponding to distinct values of λ. This is followed by pairwise comparison of distinct potentials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2018

Identification of human immunodeficiency virus type-1 Gag-TSG101 interaction inhibitors by high-throughput screening

Highlights: • Development of HTS system based on ELISA targeting Gag-TSG101 interaction. • Screening of 9600 compounds identified 11 compounds inhibiting Gag-TSG101 binding. • Hit compounds, HSM-9 and HSM-10 potently reduced HIV-1 replication. The interaction between viral protein Gag and cellular protein tumor susceptibility gene 101 (TSG101) is a crucial step in the HIV-1 replication cycle. This interaction initiates the viral assembly/budding via the cellular endosomal sorting complexes required for transport (ESCRT) pathway, making it a potential target for antiviral therapy. Here we developed a simple, robust, and reliable high-throughput screening (HTS) system based on enzyme-linked immunosorbent assay (ELISA) to identify compounds that inhibit HIV-1 replication by targeting Gag-TSG101 interaction. Through screening of the 9600-compound library using the established HTS system, several hit compounds, which inhibited Gag-TSG101 interaction, were identified. Subsequent assays revealed two hit compounds, HSM-9 and HSM-10, which have antiviral activity against CD4{sup +} T cell-tropic NL4-3 and macrophage-tropic JR-CSF HIV-1 strains. These results suggest that our established HTS system is an indispensable tool for the identification of HIV-1 Gag-TSG101 interaction inhibitors.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

High-throughput, one-step screening, cloning and expression based on the lethality of DpnI in Escherichia coli

Highlights: • The extreme toxicity of the DpnI from Streptococcus pneumoniae in bacteria containing Gm6ATC, the product of Dam methylation. • One-step screening, cloning and expression based on the lethality of DpnI in Escherichia coli. • The efficiency of using this method for cloning was approximately 100%. • Rapid one-step selection of soluble proteins. The manipulation of recombinant DNA has been an integral step in molecular biology to date. A number of strategies have been developed over the years, as traditional cloning methods are time consuming, have high backgrounds and low efficiency and are often limited by the number of suitable restriction sites available. Here, we constructed a series of new positive-selection-based cloning vectors that overcome most of the above mentioned drawbacks and can be applied in both eukaryotic and prokaryotic systems. This strategy is based on the extreme toxicity of DpnI in wild-type E. coli and the inactivation of this lethality by the introduction of target gene within multiple cloning sites. There are no rapid approaches for identifying soluble proteins for high-throughput screening. In this study, we combined this highly efficient cloning strategy with rapid identification of soluble proteins to construct vectors with multiple fusion tags, such as MBP, GST, CBD, NusA, and Sumo, to generate enzymes with potential diagnostic, industrial or therapeutic applications. Thus, this versatile positive-selection-based technology is appropriate for routine cloning, DNA library construction, and high-throughput screening for the expression of proteins of interest.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2014

Dose–Volume Modeling of Brachial Plexus-Associated Neuropathy After Radiation Therapy for Head-and-Neck Cancer: Findings From a Prospective Screening Protocol

Purpose: Data from a prospective screening protocol administered for patients previously irradiated for head-and-neck cancer was analyzed to identify dosimetric predictors of brachial plexus-associated neuropathy. Methods and Materials: Three hundred fifty-two patients who had previously completed radiation therapy for squamous cell carcinoma of the head and neck were prospectively screened from August 2007 to April 2013 using a standardized self-administered instrument for symptoms of neuropathy thought to be related to brachial plexus injury. All patients were disease-free at the time of screening. The median time from radiation therapy was 40 months (range, 6-111 months). A total of 177 patients (50%) underwent neck dissection. Two hundred twenty-one patients (63%) received concurrent chemotherapy. Results: Fifty-one patients (14%) reported brachial plexus-related neuropathic symptoms with the most common being ipsilateral pain (50%), numbness/tingling (40%), and motor weakness and/or muscle atrophy (25%). The 3- and 5-year estimates of freedom from brachial plexus-associated neuropathy were 86% and 81%, respectively. Clinical/pathological N3 disease (P<.001) and maximum radiation dose to the ipsilateral brachial plexus (P=.01) were significantly associated with neuropathic symptoms. Cox regression analysis revealed significant dose–volume effects for brachial plexus-associated neuropathy. The volume of the ipsilateral brachial plexus receiving >70 Gy (V70) predicted for symptoms, with the incidence increasing with V70 >10% (P<.001). A correlation was also observed for the volume receiving >74 Gy (V74) among patients treated without neck dissection, with a cutoff of 4% predictive of symptoms (P=.038). Conclusions: Dose–volume guidelines were developed for radiation planning that may limit brachial plexus-related neuropathies.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2022

Optimal high-throughput virtual screening pipeline for efficient selection of redox-active organic materials

As global interest in renewable energy continues to increase, there has been a pressing need for developing novel energy storage devices based on organic electrode materials that can overcome the shortcomings of the current lithium-ion batteries. One critical challenge for this quest is to find materials whose redox potential (RP) meets specific design targets. In this study, we propose a computational framework for addressing this challenge through the effective design and optimal operation of a high-throughput virtual screening (HTVS) pipeline that enables rapid screening of organic materials that satisfy the desired criteria. Starting from a high-fidelity model for estimating the RP of a given material, we show how a set of surrogate models with different accuracy and complexity may be designed to construct a highly accurate and efficient HTVS pipeline. We demonstrate that the proposed HTVS pipeline construction and operation strategies substantially enhance the overall screening throughput.

36 MATERIALS SCIENCE↗
DOE OSTI2013

A high-order integral solver for scalar problems of diffraction by screens and apertures in three-dimensional space

We present a novel methodology for the numerical solution of problems of diffraction by infinitely thin screens in three-dimensional space. Our approach relies on new integral formulations as well as associated high-order quadrature rules. The new integral formulations involve weighted versions of the classical integral operators related to the thin-screen Dirichlet and Neumann problems as well as a generalization to the open-surface problem of the classical Calderón formulae. The high-order quadrature rules we introduce for these operators, in turn, resolve the multiple Green function and edge singularities (which occur at arbitrarily close distances from each other, and which include weakly singular as well as hypersingular kernels) and thus give rise to super-algebraically fast convergence as the discretization sizes are increased. When used in conjunction with Krylov-subspace linear algebra solvers such as GMRES, the resulting solvers produce results of high accuracy in small numbers of iterations for low and high frequencies alike. We demonstrate our methodology with a variety of numerical results for screen and aperture problems at high frequencies—including simulation of classical experiments such as the diffraction by a circular disc (featuring in particular the famous Poisson spot), evaluation of interference fringes resulting from diffraction across two nearby circular apertures, as well as solution of problems of scattering by more complex geometries consisting of multiple scatterers and cavities.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2014

Metallographic screening of grain boundary engineered type 304 austenitic stainless steel

An electrochemical etching method for the identification of grain boundary engineered type 304 austenitic stainless steel microstructures is described. The method can be applied for rapid microstructure screening to complement electron backscatter diffraction analysis. A threshold parameter to identify grain boundary engineered microstructure is proposed, and the application of metallographic etching for characterising the degree of grain boundary engineering discussed. - Highlights: • As-received (annealed) and grain boundary engineered microstructures were compared. • Electro-chemical polarisation in nitric acid solutions was carried out. • A metallographic screening method has been developed. • The screening method complements EBSD analysis for microstructure identification.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Use of high throughput screening methods to study dual-functional crosslinkable latexes

Herein, structure-formulation-property relationships for crosslinkable core-shell latexes were studied initially using high throughput screening methods and then using conventional experimental methods to determine optimum coating formulations. Two approaches that are used within coatings technology to improve sustainability are reduction in volatile organic compounds (VOC) and reduction in energy needed to cure coatings. Hybrid crosslinkable core-shell latexes have shown potential in meeting these challenges where film properties provided by particle coalescence are not sufficient and chemical crosslinking is needed. However, with numerous parameters involved such as latex particle architecture, nature and amount of crosslinker, and curing conditions, the screening of formulations via conventional coating testing methods becomes laborious and time-consuming. The results from high-throughput dye extraction and puncture testing were compared to data from conventional testing methods such as chemical resistance (MEK double rubs), pendulum hardness, and tensile testing to identify correlations. The dye extraction results have shown a strong correlation to solvent resistance and pendulum hardness data whereas toughness from puncture testing data correlated to tensile testing. Both high throughput dye extraction and puncture testing methods can be used for the accelerated screening of crosslinkable coating formulations to optimize curing parameters to achieve the best coating performance.

36 MATERIALS SCIENCE↗
DOE OSTI2026

>24% screen printed Cu contacted n-TOPCon solar cells with successful implementation of LECO process

In this paper, we report the successful fabrication of >24.0 % efficiency n-TOPCon Si solar cells with screen-printed, fire-through Cu contact to n-TOPCon on the rear side and Ag contacted boron emitter on the front side by implementing optimized firing and LECO conditions. The highest efficiency (24.3%) Cu contacted n-TOPCon cell in this study showed excellent cell performance parameters with V oc >730 mV, J sc of 41.1 mA/cm 2 and FF of 80.8%, resulting in an absolute efficiency gap of 0.2% between Cu-contacted and fully Ag contacted n-TOPCon cells (24.5%). The mini-module fabricated with the Cu contacted n-TOPCon cell showed excellent reliability and durability of open-circuit voltage (V oc ), pseudo fill factor (pFF) and efficiency after prolonged damp-heat tests. Such high efficiency screen printed Cu contacted n-TOPCon cells provide unique opportunity to replace very expensive Ag contact on n-TOPCon with cheaper screen printable Cu metal pastes.

14 SOLAR ENERGY↗
DOE OSTI2015

Screening tool to evaluate the vulnerability of down-gradient receptors to groundwater contaminants from uncapped landfills

Highlights: • A spreadsheet-based risk screening tool for groundwater affected by landfills is presented. • Domenico solute transport equations are used to estimate downgradient contaminant concentrations. • Landfills are categorized as presenting high, moderate or low risks. • Analysis of parameter sensitivity and examples of the method’s application are given. • The method has value to regulators and those considering redeveloping closed landfills. - Abstract: A screening tool for quantifying levels of concern for contaminants detected in monitoring wells on or near landfills to down-gradient receptors (streams, wetlands and residential lots) was developed and evaluated. The tool uses Quick Domenico Multi-scenario (QDM), a spreadsheet implementation of Domenico-based solute transport, to estimate concentrations of contaminants reaching receptors under steady-state conditions from a constant-strength source. Unlike most other available Domenico-based model applications, QDM calculates the time for down-gradient contaminant concentrations to approach steady state and appropriate dispersivity values, and allows for up to fifty simulations on a single spreadsheet. Sensitivity of QDM solutions to critical model parameters was quantified. The screening tool uses QDM results to categorize landfills as having high, moderate and low levels of concern, based on contaminant concentrations reaching receptors relative to regulatory concentrations. The application of this tool was demonstrated by assessing levels of concern (as defined by the New Jersey Pinelands Commission) for thirty closed, uncapped landfills in the New Jersey Pinelands National Reserve, using historic water-quality data from monitoring wells on and near landfills and hydraulic parameters from regional flow models. Twelve of these landfills are categorized as having high levels of concern, indicating a need for further assessment. This tool is not a replacement for conventional numerically-based transport model or other available Domenico-based applications, but is suitable for quickly assessing the level of concern posed by a landfill or other contaminant point source before expensive and lengthy monitoring or remediation measures are taken. In addition to quantifying the level of concern using historic groundwater-monitoring data, the tool allows for archiving model scenarios and adding refinements as new data become available.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Impurity temperature screening in stellarators close to quasisymmetry

Impurity temperature screening is a favourable neoclassical phenomenon involving an outward radial flux of impurity ions from the core of fusion devices. Quasisymmetric magnetic fields lead to intrinsically ambipolar neoclassical fluxes that give rise to temperature screening for low enough $\unicode[STIX]{x1D702}^{-1}\equiv d\ln n/d\ln T$ . In contrast, neoclassical fluxes in generic stellarators will depend on the radial electric field, which is predicted to be inward for ion-root plasmas, potentially leading to impurity accumulation. Here, we examine the impurity particle flux in a number of approximately quasisymmetric stellarator configurations and parameter regimes while varying the amount of symmetry breaking in the magnetic field. For the majority of this work, neoclassical fluxes have been obtained using the SFINCS drift-kinetic equation solver with electrostatic potential $\unicode[STIX]{x1D6F7}=\unicode[STIX]{x1D6F7}(r)$ , where $r$ is a flux-surface label. Results indicate that achieving temperature screening is possible, but unlikely, at low-collisionality reactor-relevant conditions in the core. Thus, the small departures from symmetry in nominally quasisymmetric stellarators are large enough to significantly alter the neoclassical impurity transport. A further look at the magnitude of these fluxes when compared to a gyro-Bohm turbulence estimate suggests that neoclassical fluxes are small in configurations optimized for quasisymmetry when compared to turbulent fluxes.

Physics↗
DOE OSTI2023

Development of a Universal Second-Tier Newborn Screening LC–MS/MS Method for Amino Acids, Lysophosphatidylcholines, and Organic Acids

First-tier MS-based newborn screening by flow injection analysis can have high presumptive positive rates, often due to isomeric/isobaric compounds or poor biomarker specificity. These presumptive positive samples can be analyzed by second-tier screening assays employing separations such as liquid chromatography–mass spectrometry (LC–MS/MS), which increases test specificity and drastically reduces false positive referrals. The ability to screen for multiple disorders in a single multiplexed test simplifies workflows and maximizes public health laboratories’ resources. In this study, we developed and validated a highly multiplexed second-tier method for dried blood spots using a hydrophilic interaction liquid chromatography (HILIC) column coupled to an MS/MS system. The LC–MS/MS method was capable of simultaneously detecting second-tier biomarkers for maple syrup urine disease, homocystinuria, methylmalonic acidemia, propionic acidemia, glutaric acidemia type 1, glutaric acidemia type 2, guanidinoacetate methyltransferase deficiency, short-chain acyl-CoA dehydrogenase deficiency, adrenoleukodystrophy, and Pompe disease.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

High-Throughput Computational Screening of Perovskites for Thermochemical Water Splitting Applications

The use of hydrogen as fuel is a promising avenue to aid in the reduction of greenhouse effect gases released in the atmosphere. In this work, we present a high-throughput density functional theory (HT-DFT) study of 5,329 cubic and distorted perovskite ABO 3 compounds to screen for thermodynamically favorable two-step thermochemical water splitting (TWS) materials. From a data set of more than 11,000 calculations, we screened materials based on the following: (a) thermodynamic stability and (b) oxygen vacancy formation energy that allow favorable TWS. From our screening strategy, we identify 139 materials as potential new candidates for TWS application. Several of these compounds, such as CeCoO 3 and BiVO 3 , have not been experimentally explored yet for TWS and present promising avenues for further research. We show that taking into consideration all phases present in the A–B–O ternary phase, as opposed to only calculating the formation energy of a compound, is crucial to assess correctly the stability of a compound as it reduces the number of potential candidates from 5,329 to 383. Finally, our large data set of compounds containing stabilites, oxidation states, and ionic sizes allowed us to revisit the structural maps for perovskites by showing stable and unstable compounds simultaneously.

08 HYDROGEN↗
DOE OSTI2018

Inverse Band Structure Design via Materials Database Screening: Application to Square Planar Thermoelectrics

Electronic band structure contains a wealth of information on the electronic properties of a solid and is routinely computed. However, the more difficult problem of designing a solid with a desired band structure is an outstanding challenge. In order to address this inverse band structure design problem, we devise an approach using materials database screening with materials attributes based on the constituent elements, nominal electron count, crystal structure, and thermodynamics. Our strategy is tested in the context of thermoelectric materials, for which a targeted band structure containing both flat and dispersive components with respect to crystal momentum is highly desirable. We screen for thermodynamically stable or metastable compounds containing d 8 transition metals coordinated by anions in a square planar geometry in order to mimic the properties of recently identified oxide thermoelectrics with such a band structure. In doing so, we identify 157 compounds out of a total of over half a million candidates. After further screening based on electronic band gap and structural anisotropy, we explicitly compute the band structures for the several of the candidates in order to validate the approach. We successfully find two new oxide systems that achieve the targeted band structure. Electronic transport calculations on these two compounds, Ba 2 PdO 3 and La 4 PdO 7 , confirm promising thermoelectric power factor behavior for the compounds. This methodology is easily adapted to other targeted band structures and should be widely applicable to a variety of design problems.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Charge Transfer Screening and Energy Level Alignment at Complex Organic–Inorganic Interfaces: A Tractable Ab Initio GW Approach

Complex organic–inorganic interfaces are important for device and sensing applications. Charge transfer doping is prevalent in such applications and can affect the interfacial energy level alignments (ELA), which are determined by many-body interactions. We develop an approximate ab initio many-body GW approach that can capture many-body interactions due to interfacial charge transfer. The approach uses significantly less resources than a regular GW calculation but gives excellent agreement with benchmark GW calculations on an F4TCNQ/graphene interface. We find that many-body interactions due to charge transfer screening result in gate-tunable F4TCNQ HOMO–LUMO gaps. We further predict the ELA of a large system of experimental interest—4,4'-bis(dimethylamino)bipyridine (DMAP-OED) on monolayer MoS 2 , where charge transfer screening results in an ~1 eV reduction of the molecular HOMO–LUMO gap. Comparison with a two-dimensional electron gas model reveals the importance of explicitly considering the intraband transitions in determining the charge transfer screening in organic–inorganic interface systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Ensemble control of Kondo screening in molecular adsorbates

Switching the magnetic properties of organic semiconductors on a metal surface has thus far largely been limited to molecule-by-molecule tip-induced transformations in scanned probe experiments. Here we demonstrate with molecular resolution that collective control of activated Kondo screening can be achieved in thin-films of the organic semiconductor titanyl phthalocyanine on Cu(110) to obtain tunable concentrations of Kondo impurities. Using low-temperature scanning tunneling microscopy and spectroscopy, we show that a thermally activated molecular distortion dramatically shifts surface–molecule coupling and enables ensemble-level control of Kondo screening in the interfacial spin system. This is accompanied by the formation of a temperature-dependent Abrikosov–Suhl–Kondo resonance in the local density of states of the activated molecules. This enables coverage-dependent control over activation to the Kondo screening state. Finally, our study thus advances the versatility of molecular switching for Kondo physics and opens new avenues for scalable bottom-up tailoring of the electronic structure and magnetic texture of organic semiconductor interfaces at the nanoscale.

36 MATERIALS SCIENCE↗
DOE OSTI2016

High-Throughput Screening of Metal–Organic Frameworks for CO 2 Capture in the Presence of Water

Competitive co-adsorption of water is a major problem in the deployment of adsorption-based CO 2 capture. Water molecules may compete for adsorption sites, reducing the capacity of the material, and dehumidification prior to separating CO 2 from N 2 increases process complexity and cost. The development of adsorbent materials that can selectively adsorb CO 2 in the presence of water would be a major step forward in the deployment of CO2 capture materials in practice. In this study, large-scale computational screening was carried out to search for metal-organic frameworks (MOFs) with high selectivity toward CO 2 over H 2 O. Calculating framework charges for thousands of MOFs is a significant challenge, so initial screening used a fast, but approximate, charge calculation method. Based on the initial screening, 15 MOFs were selected, and Monte Carlo simulations were carried out to compute the adsorption isotherms for these MOFs using more accurate framework charges calculated by density functional theory. Here, a detailed investigation was performed on the effect of using different methods for calculating partial charges, and it was found that electrostatic interactions contribute the majority of the adsorption energy of H 2 O in the selected MOFs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Investigating Fast Scanning Calorimetry and Differential Scanning Calorimetry as Screening Tools for Thermoset Polymer Material Compatibility with Laser-Based Powder Bed Fusion

As additive manufacturing (AM) technology has developed and progressed, a constant topic of research in the area is expanding the library of materials to be used with these techniques. Among AM methods that utilize polymers, laser-based powder bed fusion (PBF-LB) has preferentially used thermoplastic polymers as its starting materials, but the deposition and material joining method employed in PBF-LB may also be compatible with powdered thermoset polymer precursors as feedstocks. To assess the compatibility of candidate thermosetting polymers and PBF-LB, characterization techniques and protocols that link fundamental material behavior to material behavior in the processing environment are needed. Therefore, the objectives of this work are to compare the curing behavior measured with two different calorimetry techniques that can operate in different heating rate regimes, differential scanning calorimetry (DSC) and fast scanning calorimetry (FSC), and to assess the capabilities of these techniques to act as materials screening tools for PBF-LB. A commercial polyester powder coating is used as a model material to evaluate the potential of obtaining complimentary information for material screening through a combination of calorimetry methods, and its non-isothermal curing behavior is measured at heating rates between 5 °C/min and 7500 °C/min. Curing exotherms are observed with both calorimetry techniques, and comparing the enthalpy associated with curing shows that incomplete curing occurs at higher heating rates, with relative conversion values of approximately 30%. The curing data are fit with two isoconversional models, Friedman and Starink, which show a reduced activation energy at higher heating rates as well, signifying a lower barrier to curing at the conditions used in the FSC experiments. Overall, the results of this work indicate that using these two calorimetry techniques as tiered screening tools can provide valuable information about how curing may proceed in PBF-LB and inform materials selection and design activities for additive manufacturing.

36 MATERIALS SCIENCE↗