Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SCANDIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Optical, structural and aging properties of Al/Sc-based multilayers for the extreme ultraviolet

This manuscript presents the structural characterization of Al/Sc-based periodic multilayer coatings for the extreme ultraviolet (EUV) spectral range. Based on transmission electron microscopy and electron diffraction as well as grazing-incidence and large-angle x-ray diffraction, a model for the layer structure and the interfacial effects of Al/Sc coatings is built. The onset of crystallization in nanoscale Al and Sc layers as a function of thickness is also revealed in these characterizations. The Al/Sc layer model is validated and further refined by fitting in-band and out-of-band EUV reflectance measurements across 5 orders of magnitude in an extended wavelength range from 17 to 80 nm. Here, the same type of EUV reflectance measurements is used to test the Al/Sc aging properties and to demonstrate the spectral response of optimized two- and tri-material multilayers including Al/Sc, Al/Sc/SiC and Mo/Al/Sc.

36 MATERIALS SCIENCE↗

Level densities and radiative strength functions

This paper presents a summary of the latest results from experiments performed at the Oslo Cyclotron. The Oslo group has developed a technique to extract simultaneously the level density and radiative strength function from primary {gamma}-ray spectra. A small (pygmy) resonance in the radiative strength function has been observed at around 3 MeV in several deformed rare earth nuclei. This resonance is shown to be of M1 character and the origin is thought to be the scissors mode. This resonance vanishes for the spherical Sm nuclei, as expected, since the scissors mode is dependent on deformation. Experiments performed in Oslo found the resonance in Dy isotopes to be twice as wide as the width extracted in an indirect way by comparing simulations with two-step cascade spectra from neutron capture experiments. In {sup 116,117}Sn an increase in the slope of the radiative strength function around E{sub {gamma}} = 4.5 MeV indicates the onset of resonance-like structures in both nuclei, resulting in a significant enhancement of the radiative strength functions compared to standard models in the energy region 4.5<E{sub {gamma}}<7.7 MeV. Another interesting phenomenon is the unexpected enhancement of the {gamma}-strength function below 4 MeV which has been observed in Fe, Mo, V, and Sc isotopes. The level density and radiative strength function of {sup 96}Mo have been reanalyzed, and the enhanced {gamma} strength for E{sub {gamma}}<3-4 MeV is confirmed. This enhancement is presently not understood and remains a challenge for theoretical models.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Activities on Nuclear Data Measurements at Pohang Neutron Facility

We report the activities of the Pohang Neutron Facility which consists of an electron linear accelerator, a water-cooled Ta target, and a 12-m time-of-flight path. It has been equipped with a four-position sample changer controlled remotely by a CAMAC data acquisition system, which allows simultaneous accumulation of the neutron time of flight spectra from 4 different detectors. It can be possible to measure the neutron total cross-sections in the neutron energy range from 0.1 eV to few hundreds eV by using the neutron time-of-flight method. A {sup 6}LiZnS(Ag) glass scintillator was used as a neutron detector. The neutron flight path from the water-cooled Ta target to the neutron detector was 12.1 m. The background level was determined by using notch-filters of Co, In, Ta, and Cd sheets. In order to reduce the gamma rays from bremsstrahlung and those from neutron capture, we employed a neutron-gamma separation system based on their different pulse shapes. The present measurements of several samples (Ta, Mo) are in general agreement with the evaluated data in ENDF/B-VI. We measured the thermal neutron capture cross-sections and the resonance integrals of the {sup 186}W(n,{gamma}){sup 187}W reaction and the {sup 98}Mo(n,{gamma}){sup 99}Mo reaction by the activation method using the {sup 197}Au(n,{gamma}){sup 198}Au monitor reaction as a single comparator. We also report the isomeric yield ratios for the 44 m, gSc isomeric pairs produced from four different photonuclear reactions {sup 45}Sc({gamma},n){sup 44m,g}Sc, {sup nat}Ti({gamma},xn1p){sup 44m,g}Sc, {sup nat}Fe({gamma},xn5p){sup 52m,g}Mn, and {sup 103}Rh({gamma},4n){sup 99m,g}Rh by using the activation method.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Search for the Origin and Limits of Nuclei at the NSCL

The recent production of the most neutron-rich nuclei by the fragmentation of {sup 48}Ca and {sup 76}Ge beams at Michigan State are presented. The cross sections were measured for a large range of nuclei including fifteen new isotopes that are the most neutron-rich nuclides of magnesium, aluminum, silicon, and the elements from chlorine to manganese. The cross sections of several new nuclei were found to be enhanced relative to a simple thermal evaporation framework that was previously shown to describe similar production cross sections. This difference indicates that precursor excited nuclei in the region around {sup 62}Ti that decay to the observed nuclei may be more stable than predicted by current mass models. The enhanced stability may be evidence for a new island of inversion similar to that centered on {sup 31}Na. The NSCL at Michigan State University was recently selected to be the site of the next generation radioactive beam facility, FRIB, for the United States. A brief overview of the proposed facility and some of its capabilities are presented.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Epitaxial growth and piezoelectric characterization of the (1-x)BiScO{sub 3}-(x)PbTiO{sub 3} ultrathin film

We studied ferroelectric properties of morphotropic phase boundary (1-x)BiScO{sub 3}-(x)PbTiO{sub 3} (BSPT, x = 0.64) epitaxial thin films on SrTiO{sub 3} (001) and Nb:SrTiO{sub 3} (001). BSPT thin films with various thicknesses were deposited using off-axis radio frequency magnetron sputtering. By analyzing x-ray data of BSPT thin films with various thicknesses, we confirmed that films thinner than {approx}22 nm were in a strained state. Films thicker than {approx}22 nm were in a relaxed state because of the strain relaxation mechanism caused by misfit dislocation formation. Clear piezoresponses and polarization reversal phenomena can be observed in the ultrathin limit down to 8 nm through Piezo Force Microscope experiments. The piezoresponse data as a function of thickness correlates with the structural modification of thin films.

36 MATERIALS SCIENCE↗

Bulk Modulus of Sc2O3: Ab Initio Calculations and Experimental Results

The bulk modulus of scandia is evaluated by ab initio calculation, based on density functional theory, and compared with bulk modulus measurement on nearly fully dense scandia and with the value attained from the equation of state based on diamond anvil cell measurements. The current results are in the upper range of the bulk moduli results in the literature. The scatter in the literature results might be explained by the differences in the specific volumes of the measured and calculated cases. For the specific volume of 59.65 {+-} 0.07 {angstrom}{sup 3} the average measured isothermal bulk modulus of scandia from the present study and recent literature results is 188 {+-} 10 GPa.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Anomalously high thermoelectric power factor in epitaxial ScN thin films

Thermoelectric properties of ScN thin films grown by reactive magnetron sputtering on Al{sub 2}O{sub 3}(0001) wafers are reported. X-ray diffraction and elastic recoil detection analyses show that the composition of the films is close to stoichiometry with trace amounts ({approx}1 at. % in total) of C, O, and F. We found that the ScN thin-film exhibits a rather low electrical resistivity of {approx}2.94 {mu}{Omega}m, while its Seebeck coefficient is approximately {approx}-86 {mu}V/K at 800 K, yielding a power factor of {approx}2.5 x 10{sup -3} W/mK{sup 2}. This value is anomalously high for common transition-metal nitrides.

36 MATERIALS SCIENCE↗

On the possibility to measure 0{nu}{beta}{beta}-decay nuclear matrix element for {sup 48}Ca

As shown in Ref. [2], the Fermi part M{sub F}{sup 0{nu}} of the total 0{nu}{beta}{beta}-decay nuclear matrix element M{sup 0{nu}} can be related to the single Fermi transition matrix element between the isobaric analog state (IAS) of the ground state of the initial nucleus and the ground state of the final nucleus. The latter matrix element could be measured in charge-exchange reactions. Here we discuss a possibility of such a measurement for {sup 48}Ca and estimate the cross-section of the reaction {sup 48}Ti(n,p){sup 48}Sc(IAS).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Structural and optical quality of GaN grown on Sc{sub 2}O{sub 3}/Y{sub 2}O{sub 3}/Si(111)

Thick ({approx}900 nm) GaN layers were grown by molecular beam epitaxy on cost-effective Sc{sub 2}O{sub 3}/Y{sub 2}O{sub 3}/Si(111) substrates and characterized by x-ray diffraction and photoluminescence. Samples grown in Ga-rich condition show superior structural and optical quality with reduced density of cubic GaN inclusions within the hexagonal matrix and a relatively strong photoluminescence emission at 3.45 eV at 10 K. Cubic inclusions are formed in the initial growth stage and their concentration is reduced with increasing film thickness and after rapid thermal annealing.

36 MATERIALS SCIENCE↗

Structural investigations of interfaces in Fe{sub 90}Sc{sub 10} nanoglasses using high-energy x-ray diffraction

High-resolution diffraction experiments of Fe{sub 90}Sc{sub 10} nanoglasses and rapidly quenched metallic glasses as reference materials have been performed using high-energy x-rays with a wavelength of 0.21 Angst from a synchrotron radiation source. Nanoglasses are amorphous alloys with a significant fraction of interfaces on the nanometer scale. The short- and intermediate-range orders of a nanoglass are different from the well known amorphous materials produced by rapid quenching from the melt. These structural modifications have significant influence on the physical properties. In this paper, the short- and intermediate-range orders of the nanoglass Fe{sub 90}Sc{sub 10} and the reference metallic glass Fe{sub 90}Sc{sub 10} alloy prepared by rapid quenching are discussed.

36 MATERIALS SCIENCE↗

Microstructure and dielectric properties of piezoelectric magnetron sputtered w-Sc{sub x}Al{sub 1-x}N thin films

Piezoelectric wurtzite Sc{sub x}Al{sub 1-x}N (x = 0, 0.1, 0.2, 0.3) thin films were epitaxially grown by reactive magnetron co-sputtering from elemental Sc and Al targets. Al{sub 2}O{sub 3}(0001) wafers with TiN(111) seed and electrode layers were used as substrates. X-ray diffraction shows that an increase in the Sc content results in the degradation of the crystalline quality. Samples grown at 400 deg. C possess true dielectric behavior with quite low dielectric losses and the leakage current is negligible. For ScAlN samples grown at 800 deg. C, the crystal structure is poor and leakage current is high. Transmission electron microscopy with energy dispersive x-ray spectroscopy mapping shows a mass separation into ScN-rich and AlN-rich domains for x {>=} 0.2 when substrate temperature is increased from 400 to 800 deg. C. The piezoelectric response of epitaxial Sc{sub x}Al{sub 1-x}N films measured by piezoresponse force microscopy and double beam interferometry shows up to 180% increase by the addition of Sc up to x = 0.2 independent of substrate temperature, in good agreement with previous theoretical predictions based on density-functional theory.

36 MATERIALS SCIENCE↗

A new promising nonlinear optical (NLO) crystal for visible and ultraviolet (UV) regions

Different La{sub 1−x}Gd{sub x}Sc{sub 3}(BO{sub 3}){sub 4} compounds with 0 ≤ x ≤ 0.5 were synthesized by solid-state reaction method. The X-ray diffraction studies revealed that the compounds containing more than 30 at.% Gd{sup 3+} ions have non-centrosymmetric trigonal structure (space group R32) and, consequently they are optically nonlinear. A crystal of La{sub x}Gd{sub y}Sc{sub z}(BO{sub 3}){sub 4} (x+y+z = 4) – LGSB with La{sub 0.75}Gd{sub 0.5}Sc{sub 2.75}(BO{sub 3}){sub 4} starting melt composition and relatively small dimensions (about 10 mm in diameter and 25 mm in length) was grown by the Czochralski method. In order to confirm the NLO property, the as-grown crystal was subjected to second-harmonic generation (SHG) test. The nonlinear coefficient d{sub 11} of LGSB crystal has been preliminary estimated to be about 1.9 pm/V, which is larger than that of YAl{sub 3}(BO{sub 3}){sub 4} (YAB) crystal. This article has been formally retracted, please refer to the article PDF for the full retraction notice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Layer-by-layer shuttered molecular-beam epitaxial growth of superconducting Sr{sub 1-x}La{sub x}CuO{sub 2} thin films

Superconducting Sr{sub 1-x}La{sub x}CuO{sub 2} thin films have been grown on GdScO{sub 3} substrates by reflection high-energy electron diffraction calibrated layer-by-layer molecular-beam epitaxy. X-ray diffraction analysis has confirmed the infinite layer structure after an in situ vacuum annealing step. In situ photoemission spectroscopy indicates that the vacuum annealing step employed immediately after film growth to achieve superconducting films results in oxygen loss from the films. The superconducting critical temperature depends on the La content x, with the highest value obtained for x{approx}0.10. Resistivity as a function of temperature {rho}(T) curves of optimally doped samples show a T{sup 2} temperature dependence characteristic of a scattering process where electron-electron interactions dominate.

36 MATERIALS SCIENCE↗

Thermoelectric properties of epitaxial ScN films deposited by reactive magnetron sputtering onto MgO(001) substrates

Epitaxial ScN(001) thin films were grown on MgO(001) substrates by dc reactive magnetron sputtering. The deposition was performed in an Ar/N{sub 2} atmosphere at 2 Multiplication-Sign 10{sup -3} Torr at a substrate temperature of 850 Degree-Sign C in a high vacuum chamber with a base pressure of 10{sup -8} Torr. In spite of oxygen contamination of 1.6 {+-} 1 at. %, the electrical resistivity, electron mobility, and carrier concentration obtained from a typical film grown under these conditions by room temperature Hall measurements are 0.22 m{Omega} cm, 106 cm{sup 2} V{sup -1} s{sup -1}, and 2.5 Multiplication-Sign 10{sup 20} cm{sup -3}, respectively. These films exhibit remarkable thermoelectric power factors of 3.3-3.5 Multiplication-Sign 10{sup -3} W/mK{sup 2} in the temperature range of 600 K to 840 K. The cross-plane thermal conductivity is 8.3 W/mK at 800 K yielding an estimated ZT of 0.3. Theoretical modeling of the thermoelectric properties of ScN calculated using a mean-free-path of 23 nm at 300 K is in very good agreement with the experiment. These results also demonstrate that further optimization of the power factor of ScN is possible. First-principles density functional theory combined with the site occupancy disorder technique was used to investigate the effect of oxygen contamination on the electronic structure and thermoelectric properties of ScN. The computational results suggest that oxygen atoms in ScN mix uniformly on the N site forming a homogeneous solid solution alloy. Behaving as an n-type donor, oxygen causes a shift of the Fermi level in ScN into the conduction band without altering the band structure and the density of states.

36 MATERIALS SCIENCE↗

Ferroelectric, piezoelectric, and dielectric properties of BiScO{sub 3}-PbTiO{sub 3}-Pb(Cd{sub 1/3}Nb{sub 2/3})O{sub 3} ternary high temperature piezoelectric ceramics

(0.95-x)BiScO{sub 3}-xPbTiO{sub 3}-0.05Pb(Cd{sub 1/3}Nb{sub 2/3})O{sub 3} (BS-xPT-PCN) high temperature piezoelectric ceramics near the morphotropic phase boundary (MPB) have been synthesized by traditional solid-state reaction methods. The microstructural morphology, phase structure, and electrical properties of BS-xPT-PCN ceramics were investigated in detail. X-ray diffraction analysis indicated BS-xPT-PCN ceramics have a pure perovskite structure. The coexistence of rhombohedral and tetragonal phases at MPB composition enhanced the polarizability by the coupling between two dynamically equivalent energy states, resulting in the improved piezoelectric and ferroelectric properties at MPB vicinity. The BS-xPT-PCN (x = 0.60) ceramics possess the optimal piezoelectric and ferroelectric properties with d{sub 33} = 505pC/N, k{sub p} = 55.9%, k{sub t} = 36.5%, strain = 0.23% (under the electric field 37.5 kV/cm), and P{sub r} = 39.7 {mu}C/cm{sup 2}. High temperature dielectric behaviors showed diffuse phase transition in BS-xPT-PCN ceramics. The Curie temperature T{sub c} was found to increase from 371 Degree-Sign C to 414 Degree-Sign C with x increasing from 0.58 to 0.62. All these results together with the good thermal stabilities make the BS-xPT-PCN ceramics promising candidates for high temperature piezoelectric applications.

36 MATERIALS SCIENCE↗

OMC studies for the matrix elements in ββ decay

Energy and time spectra of gamma-rays following μ-capture in natural Kr, Se, Cd and Sm, as well as isotopic enriched {sup 82}Kr, {sup 76}Se, {sup 106}Cd and {sup 150}Sm, have been measured. Total life-times of muons in different isotopes, as well as partial μ-capture rates to the excited states of {sup 48}Sc, {sup 76}As and {sup 106}Ag, were extracted. These results are discussed in the context of the double-beta decay matrix elements. The data are also compared with data from theoretical calculations and with data from charge-exchange reactions on {sup 48}Ti. It is the first time that μ-capture and charge-exchange reaction data are being compared in the context of ββ decay.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Growth and characterization of Sc-doped EuO thin films

The preparation of 3d-transition metal-doped EuO thin films by molecular beam epitaxy is investigated using the example of Sc doping. The Sc-doped EuO samples display a good crystalline structure, despite the relatively small ionic radius of the dopant. The Sc doping leads to an enhancement of the Curie temperature to up to 125 K, remarkably similar to previous observations on lanthanide-doped EuO.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗