Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SAR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

SAR antenna calibration techniques

Calibration of SAR antennas requires a measurement of gain, elevation and azimuth pattern shape, boresight error, cross-polarization levels, and phase vs. angle and frequency. For spaceborne SAR antennas of SEASAT size operating at C-band or higher, some of these measurements can become extremely difficult using conventional far-field antenna test ranges. Near-field scanning techniques offer an alternative approach and for C-band or X-band SARs, give much improved accuracy and precision as compared to that obtainable with a far-field approach.

Carver, K. R.↗

Real-time SAR image processing onboard a Venus orbiting spacecraft

The potential use of real-time synthetic aperture radar (SAR) processing to produce 200 meter resolution imagery onboard a 1983 Venus orbiter imaging radar spacecraft is described. The VOIR SAR processing requirements are defined in terms of a nominal baseline design evolving from a 1977 VOIR mission study. A candidate onboard SAR processor architecture compatible with the VOIR requirements is next detailed. Finally, implementation characteristics, based upon currently available integrated circuits, are estimated in terms of chip count, power, and weight.

Arens, W. E.↗

Preliminary results of SAR soil moisture experiment, November 1975

The experiment was performed using the Environmental Research Institute of Michigan's (ERIM) dual-frequency and dual-polarization side-looking SAR system on board a C-46 aircraft. For each frequency, horizontally polarized pulses were transmitted and both horizontally and vertically polarized return signals were recorded on the signal film simultaneously. The test sites were located in St. Charles, Missouri; Centralia, Missouri; and Lafayette, Indiana. Each test site was a 4.83 km by 8.05 km (3 mile by 5 mile) rectangular strip of terrain. Concurrent with SAR overflight, ground soil samples of 0-to-2.5 cm and 0-to-15 cm layers were collected for soil moisture estimation. The surface features were also noted. Hard-copy image films and the digital data produced via optical processing of the signal films are analyzed in this report to study the relationship of radar backscatter to the moisture content and the surface roughness. Many difficulties associated with processing and analysis of the SAR imagery are noted. In particular, major uncertainty in the quantitative analysis appeared due to the difficulty of quality reproduction of digital data from the signal films.

Choudhury, B. J.↗

Linear Approximation SAR Azimuth Processing Study

A segmented linear approximation of the quadratic phase function that is used to focus the synthetic antenna of a SAR was studied. Ideal focusing, using a quadratic varying phase focusing function during the time radar target histories are gathered, requires a large number of complex multiplications. These can be largely eliminated by using linear approximation techniques. The result is a reduced processor size and chip count relative to ideally focussed processing and a correspondingly increased feasibility for spaceworthy implementation. A preliminary design and sizing for a spaceworthy linear approximation SAR azimuth processor meeting requirements similar to those of the SEASAT-A SAR was developed. The study resulted in a design with approximately 1500 IC's, 1.2 cubic feet of volume, and 350 watts of power for a single look, 4000 range cell azimuth processor with 25 meters resolution.

Lindquist, R. B.↗

An unusual SAR arc observed during ring current development, 4 August 1972

An unusual SAR arc observed during the growth phase of the ring current is described. Proton precipitation was observed, with electron temperature enhancements throughout the region, and an F-region trough present at the equatorward boundary; a high flux of low energy at the SAR arc location and a 'slot' in the ambient electron density are characteristic of this event. Comparisons are made with S3-A spacecraft observations made in the equatorial region at the same time and with Isis-II observations of a more normal SAR arc; the kinetic Alfven process described by Hasegawa and Mima (1978) appears to account for the acceleration of these low energy electrons, although an auroral-type acceleration process cannot be excluded.

Shepherd, G. G.↗

Comparisons between wave directional spectra from SAR and pressure sensor arrays

Simultaneous directional wave measurements were made at Torrey Pines Beach, California, by a synthetic aperture radar (SAR) and a linear array of pressure sensors. The measurements were conducted during the West Coast Experiment in March 1977. Quantitative comparisons of the normalized directional spectra from the two systems were made for wave periods of 6.9-17.0 s. The comparison results were variable but generally showed good agreement of the primary mode of the normalized directional energy. An attempt was made to quantify the physical criteria for good wave imaging in the SAR. A frequency band analysis of wave parameters such as band energy, slope, and orbital velocity did not show good correlation with the directional comparisons. It is noted that absolute values of the wave height spectrum cannot be derived from the SAR images yet and, consequently, no comparisons of absolute energy levels with corresponding array measurements were intended.

Pawka, S. S.↗

SAR observations of coastal zone conditions

Applications of Synthetic Aperture Radar (SAR) technology to the observation of coastal zones phenomena are detailed. The conditions observed include gravity wave detection, surf zone location, surface currents, and long-period 'surf beats'. Algorithms have been developed and successfully tested that determine significant wave and current parameters from the sea surface backscatter of microwave energy. Doppler information from the SAR optical correlator allows a rough estimation of near shore surface flow velocities that has been found in agreement with both theory and in situ observations as well. Seasat SAR data of the Scotland and North Carolina coasts are considered, as well as the results of bathymetric updating of coastal area charts.

Meadows, G. A.↗

Seasat SAR cross-section modulation by surface winds - GOASEX observations

Seasat radar observations of the Gulf of Alaska by the Synthetic Aperture Radar (SAR) and the Wind Speed Scatterometer (SASS) indicate that L-band backscatter is modulated by wind speed and possibly by wind direction. It is noted that the L-band backscatter is approximately proportional to the square root of surface winds and that upwind/crosswind differences in backscatter can be as large as 10% in the range of these wind speeds. It is suggested that Seasat SAR images, in conjunction with Seasat Scatterometer data may provide fine-scale mapping of ocean winds and directions. The need for further Seasat SAR-SASS comparisons in order to extend the range of wind speeds is stressed.

Thompson, T. W.↗

A derivation of the statistical characteristics of SAR imagery data

Basic statistical properties of the speckle effect and the associated spatial correlation of SAR image data are discussed. Statistics of SAR sensed measurement and their relationships to the surface mean power reflectivity are derived. The Rayleigh speckle model is reviewed. Applications of the derived statistics to SAR radiometric measures and image processing are considered.

Wu, C.↗

A digital fast correlation approach to produce SEASAT SAR imagery

This paper describes a digital processing algorithm and its associated system design for producing images from SEASAT Synthetic Aperture Radar (SAR) data. The proposed system uses the fast Fourier transform approach to perform the two-dimensional correlation process. The range migration problem, which is often a major obstacle to efficient processing, can be alleviated by approximating the locus of echoes from a point target by several linear segments. SAR data corresponding to each segment is correlated separately, and the results are coherently summed to produce full-resolution images. This processing approach exhibits high computation efficiency and simple processing control functions. It is particularly attractive for software implementation based on general purpose computer. Results of this implementation and examples of digitally correlated SEASAT SAR imagery are discussed

Wu, C.↗

Global observations of a SAR arc

A description is presented of the first results from observations of a stable auroral red (SAR) arc with the global auroral imaging instrumentation on board Dynamics Explorer (DE) 1. This instrumentation includes three spin-scan imaging photometers and a data control unit. The last visible-wavelength imaging sequence prior to onset of the geomagnetic storm begins at 0517 UT on October 20, 1981. An auroral substorm is observed in progress two orbits later, and as the substorm subsides and the diffuse aurora retreats poleward a narrow band of 630-nm emissions is observed at latitudes previously occupied by the aurora. This band is detected at 630 nm only, and is identified as the first optical observation of the SAR arc with DE 1. The third orbit of observations commences at 0830 UT on October 21 with the arc remaining visible across the nightside of earth. No visual signature of the SAR arc is detected during the sixth orbit.

Craven, J. D.↗

Observation of a heated electron population associated with the 6300 A SAR arc emission

Conjunctive observations of the Dynamics Explorer satellite pair and the Pacific Northwest Laboratory scanning photometer unit at Richland, WA have allowed identification of the low energy, heated, electron population associated with the 6300 A Stable Auroral Red (SAR) arc emission. Measurements over the SAR arc on day 296 of 1981 show an enhanced flux in the low altitude 5-12 eV electrons. Analysis of this electron population shows them to be fairly Maxwellian, with temperatures on the order of 9900 + or - 1100 K and an earthward field aligned velocity of approximately 275 + or - 60 km/sec. The electrons are not accompanied by ion precipitation. The ion loss cone is empty at least as high as 6000 km. This fact may cast some doubt as to the role of the ring current ions in the SAR arc production.

Gurgiolo, C.↗

Evaluation of ERIM optically processed SEASAT SAR data

The results of three studies on the radiometric and geometric properties of optically processed SEASAT SAR imagery are summarized. The accuracy with which the image scale can be predicted based upon a knowledge of the SAR platform and recording system parameters and the processor characteristics was evaluated. The considerations involved in making radiometric measurements from image films, the use of point targets for calibrating the effects of Doppler spectrum shifts on the radiometric calibration of the SAR image data over extended swath lengths was evaluated

Shuchman, R. A.↗

Analysis of geologic terrain models for determination of optimum SAR sensor configuration and optimum information extraction for exploration of global non-renewable resources. Pilot study: Arkansas Remote Sensing Laboratory, part 1, part 2, and part 3

Computer-generated radar simulations and mathematical geologic terrain models were used to establish the optimum radar sensor operating parameters for geologic research. An initial set of mathematical geologic terrain models was created for three basic landforms and families of simulated radar images were prepared from these models for numerous interacting sensor, platform, and terrain variables. The tradeoffs between the various sensor parameters and the quantity and quality of the extractable geologic data were investigated as well as the development of automated techniques of digital SAR image analysis. Initial work on a texture analysis of SEASAT SAR imagery is reported. Computer-generated radar simulations are shown for combinations of two geologic models and three SAR angles of incidence.

Kaupp, V. H.↗

Microstrip antennas for SAR applications

Current and future microstrip antenna technology development for Spaceborne Synthetic Aperture Radars (SAR) are summarized. Some of the electrical and mechanical characteristics of previously and presently developed microstrip SAR antennas are shown. The SEASAT, the SIR-A and presently the SIR-B antennas are all designed for operation at L-band with approximately 22 MHz of bandwidth. The antennas have linear polarization with minimum of 20 dB of polarization purity. Both the SEASAT and SIR-A antennas were designed for a fixed pointing angle of 20.5 deg and 47 deg, respectively. However, the SIR-B has the added feature of mechanical beam steering in elevation (range). With the exception of different mechanical characteristics, it is concluded that present spaceborne SAR antennas have only single frequency and single polarization performance. The lack of large spaceborne antennas operating at the higher degree of fabrication tolerance required for a given performance; and larger feed and radiating element losses.

Haddad, H. A.↗

Mapping and monitoring renewable resources with space SAR

The SEASAT-A SAR and SIR-A imagery was examined to evaluate the quality and type of information that can be extracted and used to monitor renewable resources on Earth. Two tasks were carried out: (1) a land cover classification study which utilized two sets of imagery acquired by the SEASAT-A SAR, one set by SIR-A, and one LANDSAT set (4 bands); and (2) a change detection to examine differences between pairs of SEASAT-A SAR images and relates them to hydrologic and/or agronomic variations in the scene.

Ulaby, F. T.↗

Acousto-optic/CCD real-time SAR data processor

The SAR processor which uses an acousto-optic device as the input electronic-to-optical transducer and a 2-D CCD image sensor, which is operated in the time-delay-and-integrate (TDI) mode is presented. The CCD serves as the optical detector, and it simultaneously operates as an array of optically addressed correlators. The lines of the focused SAR image form continuously (at the radar PRF) at the final row of the CCD. The principles of operation of this processor, its performance characteristics, the state-of-the-art of the devices used and experimental results are outlined. The methods by which this processor can be made flexible so that it can be dynamically adapted to changing SAR geometries is discussed.

Psaltis, D.↗

900 km of digital ocean wave spectra from the SEASAT SAR

One of the primary reasons for including the SAR in the complement of ocean microwave instruments on SEASAT was the global ocean wave spectra. An accurate, timely, and global knowledge of the full two dimensional or directional surface wave spectra has great value in both operational wave forecasting and in wave climatology, especially in the Southern Oceans. The sparse sampling obtainable from a single orbiting SAR would by itself be inadequate to reconstruct a global wave field, but when supplemented with auxiliary knowledge of the winds, the SAR might provide essential updates to a global wave model.

Beal, R. C.↗