Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SAPPHIRE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Giant secondary grain growth in Cu films on sapphire

Single crystal metal films on insulating substrates are attractive for microelectronics and other applications, but they are difficult to achieve on macroscopic length scales. The conventional approach to obtaining such films is epitaxial growth at high temperature using slow deposition in ultrahigh vacuum conditions. Here we describe a different approach that is both simpler to implement and produces superior results: sputter deposition at modest temperatures followed by annealing to induce secondary grain growth. We show that polycrystalline as-deposited Cu on α-Al{sub 2}O{sub 3}(0001) can be transformed into Cu(111) with centimeter-sized grains. Employing optical microscopy, x-ray diffraction, and electron backscatter diffraction to characterize the films before and after annealing, we find a particular as-deposited grain structure that promotes the growth of giant grains upon annealing. To demonstrate one potential application of such films, we grow graphene by chemical vapor deposition on wafers of annealed Cu and obtain epitaxial graphene grains of 0.2 mm diameter.

36 MATERIALS SCIENCE↗

Anisotropic strain relaxation and the resulting degree of polarization by one- and two-step growth in nonpolar a-plane GaN grown on r-sapphire substrate

Anisotropic strain relaxation and the resulting degree of polarization of the electronic transition in nonpolar a-plane GaN using one- and two-step growth are studied. By using two-step growth, a slower coalescence and a longer roughening-recovery process lead to larger anisotropic strain relaxation, a less striated surface, and lower densities of basal stacking fault (BSF) and prismatic stacking fault (PSF). It is suggested that anisotropic in-plane strains, surface striation, and BSF and PSF densities in nonpolar a-GaN are consequences of the rate of coalescence, the period of roughening-recovery process, and the degree of anisotropic strain relaxation. In addition, the two-step growth mode can enhance the degree of polarization of the electronic transition. The simulation results of the k⋅p perturbation approach show that the oscillator strength and degree of polarization of the electronic transition strongly depend on the in-plane strains upon anisotropic in-plane strain relaxation. The research results provide important information for optimized growth of nonpolar III-nitrides. By using two-step growth and by fabricating the devices on the high-quality nonpolar free-standing GaN substrates, high-efficiency nonpolar a-plane InGaN LEDs can be realized. Nonpolar a-plane InGaN/GaN LEDs can exhibit a strongly polarized light to improve the contrast, glare, eye discomfort and eye strain, and efficiency in display application.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modulating emission intensity of GaN-based green light emitting diodes on c-plane sapphire

The asymmetric dual-wavelength (green/blue) coupled InGaN/GaN multiple quantum wells were proposed to modulate the green emission intensity. Electroluminescent measurements demonstrate the conspicuous increment of the green light intensity by decreasing the coupled barrier thickness. This was partly attributed to capture of more carriers when holes tunnel across the thinner barrier from the blue quantum wells, as a hole reservoir, to the green quantum wells. While lower effective barrier height of the blue quantum wells benefits improved hole transportation from p-GaN to the active region. Efficiency droop of the green quantum wells was partially alleviated due to the enhanced injection efficiency of holes.

36 MATERIALS SCIENCE↗

Pulsed laser deposition of epitaxial BeO thin films on sapphire and SrTiO{sub 3}

Epitaxial beryllia thin films were grown by pulsed laser deposition on Al{sub 2}O{sub 3}(001) and SrTiO{sub 3}(111) substrates. Nearly relaxed epitaxial films were obtained on both substrates at growth temperatures of up to about 600 °C. Crystalline films with expanded lattice parameters were obtained even at room temperature. The maximum growth temperature was limited by a loss of beryllium from the film surface. The volatility of beryllium appeared to be caused by the slow oxidation kinetics at the film surface and the re-sputtering effect of high-energy Be and BeO species in the ablation plume. Time-of-flight plume composition analysis suggested that the target surface became Be metal rich at low oxygen pressures, reducing the growth rate of beryllia films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of interlayer growth condition on the transport properties of heterostructures with InGaN channel grown on sapphire by metal organic chemical vapor deposition

The effects of AlN interlayer growth condition on the properties of InAlN/InGaN heterostructures are investigated in detail. Since the properties of InGaN channel are different from the traditional GaN channel, two-step AlN interlayer is proposed, which is proven to be more suitable for the InGaN channel heterostructures than the interlayers grown at constant temperature. Test results show that two-step AlN interlayer can not only significantly improve the interface morphology between the InGaN channel and barrier layers but also make an effective protection of the high-quality InGaN channel. The electron mobility of the InAlN/InGaN heterostructure with two-step AlN interlayer achieves 890 cm{sup 2}/V s with a high two-dimensional-electron-gas density of 1.78 × 10{sup 13 }cm{sup −2}. The gratifying results indicate that the InGaN channel heterostructure with two-step interlayer is a promising candidate for microwave power devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Appearance of large crystalline domains in VO{sub 2} films grown on sapphire (001) and their phase transition characteristics

We report the first observation of large crystalline domains of several μm-size in VO{sub 2} films deposited on Al{sub 2}O{sub 3} (001) substrates by rf-biased reactive sputtering technique. The large crystalline domains, dominated with random in-plane oriented growth of (011){sub M1}-orientation, appear only under adequate substrate biasing, such as 10 W, while most biasing conditions result in conventional nanosized grains of highly oriented (010){sub M1}-orientation. Two temperature-controlled analyses, x-ray diffraction and micro-Raman spectroscopy, have revealed that some parts of large crystalline domains undergo intermediate monoclinic (M2) phase during the thermally-induced structural phase transition from monoclinic (M1) to rutile-tetragonal (R) phase. As an effect of the appearance of large crystalline domains, the film showed in-plane tensile stress, resulting in high T{sub IMT} of 69 °C due to the elongation of the V-V distance in its low-temperature monoclinic phase.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Stimulated emission of AlGaN layers grown on sapphire substrates using ammonia molecular beam epitaxy

By optimising the growth temperature of the AlGaN layers and using high-temperature AlN buffer layers, high-quality Al{sub x}Ga{sub 1 – x}N layers (x = 0.15, 0.21, 0.26, and 0.3) were obtained, in which stimulated emission in the UV spectral range 330 – 297 nm was implemented with the threshold intensity of excitation I{sub th} ≈ 0.7 – 1.4 MW cm{sup −2}, respectively. It is found that the threshold value of the stimulated emission of AlGaN layers grown by molecular beam epitaxy is largely determined by the intensity of the process of thermal decomposition of GaN, which affects the surface morphology and, consequently, the amount of optical scattering loss. It is shown that no pronounced localisation of nonequilibrium charge carriers occurs in the AlGaN layers, which is manifested in the absence of a large Stokes shift and in the realisation of optical amplification at transitions in an electron-hole plasma, and also indicates a relatively homogeneous material composition. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Improved constraints on isotropic shift and anisotropies of the speed of light using rotating cryogenic sapphire oscillators

We demonstrate that Michelson-Morley tests, which detect direction-dependent anisotropies in the speed of light, can also be used to place limits upon isotropic deviations of the vacuum speed of light from c, as described by the photon-sector standard model extension parameter {kappa}-tilde{sub tr}. A shift in the speed of light that is isotropic in one inertial frame implies anisotropic shifts in others. Using observer Lorentz covariance, we derive the time-dependent variations in the relative resonance frequencies of a pair of electromagnetic resonators that would be generated by such a shift in the rest frame of the Sun. A new analysis of a recent experimental test of relativity using this result constrains {kappa}-tilde{sub tr} with a precision of 7.4x10{sup -9}. This represents the first constraint on {kappa}-tilde{sub tr} by a Michelson-Morley experiment and the first analysis of a single experiment to simultaneously set limits on all nine nonbirefringent terms in the photon sector of the minimal standard model extension.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of gallium doping on properties of a-plane ZnO films on r-plane sapphire substrates by plasma-assisted molecular beam epitaxy

The authors report on the structural, optical, and electrical properties of Ga-doped a-plane (1120) ZnO films grown by plasma-assisted molecular beam epitaxy. Ga doping level was controlled by changing the Ga cell temperatures from 350 to 470 deg. C with an interval of 30 deg. C. With up to Ga cell temperatures of 440 deg. C, single crystalline Ga-doped a-plane ZnO films were grown; however, the sample with a Ga cell temperature of 470 deg. C showed polycrystalline features. The typical striated surface morphology normally observed from undoped ZnO films disappeared with Ga doping. ZnO films doped with Ga cell temperatures up to 440 deg. C did not show a significant change in full width at half maximum (FWHM) values of (1120) x-ray rocking curves by doping. The smallest FWHM values were 0.433 deg. ({phi}=90 deg.) and 0.522 deg. ({phi}=0 deg. ) for the sample with a Ga cell temperature of 350 deg. C. The polycrystalline ZnO film with excessive Ga doping at the Ga cell temperature of 470 deg. C showed significantly increased FWHM values. Hall measurements at room temperature (RT) revealed that electron concentration began to be saturated at the Ga cell temperature of 440 deg. C and electron mobility was drastically reduced at the Ga cell temperature of 470 deg. C. The carrier concentration of Ga-doped ZnO films were controlled from 7.2x10{sup 18} to 3.6x10{sup 20} cm{sup -3}. Anisotropic electrical properties (carrier concentration and Hall mobility) were observed in measurements by the van der Pauw method depending on the direction (c- or m-direction) for the undoped sample but not observed for the doped samples. RT photoluminescence (PL) spectra from the Ga-doped single crystalline ZnO films showed dominant near band edge (NBE) emissions with negligibly deep level emission. The NBE intensity in PL spectra increases with Ga doping.

36 MATERIALS SCIENCE↗

Growth model of silicon nanoislands on sapphire

A growth model of silicon nanoislands on silicon by molecular-beam epitaxy is refined. It is shown that silicon islands grow due to the diffusion of material from the wetting layer, with the contribution from direct hits of atoms to this growth being nearly zero.

36 MATERIALS SCIENCE↗

Pulsed modification of germanium films on silicon, sapphire, and quartz substrates: Structure and optical properties

The structural and optical properties of thin Ge films deposited onto semiconducting and insulating substrates and modified by pulsed laser radiation are studied. The films are deposited by the sputtering of a Ge target with a low-energy Xe{sup +} ion beam. Crystallization of the films is conducted by their exposure to nanosecond ruby laser radiation pulses (λ = 0.694 μm) with the energy density W = 0.2−1.4 J cm{sup −2}. During pulsed laser treatment, the irradiated area is probed with quasi-cw (quasi-continuous-wave) laser radiation (λ = 0.532 and 1.064 μm), with the reflectance recorded R(t). Experimental data on the lifetime of the Ge melt are compared with the results of calculation, and good agreement between them is demonstrated. Through the use of a number of techniques, the dependences of the composition of the films, their crystal structure, the level of strains, and the reflectance and transmittance on the conditions of deposition and annealing are established.

36 MATERIALS SCIENCE↗

Estimation of the efficiency of the introduction of a porous layer into a silicon-on-sapphire structure substrate to enhance the reliability of devices under irradiation

We investigate the efficiency of the introduction of a porous layer into the substrate of a silicon-onsapphire structure by the implantation of He ions to enhance the radiation resistance of devices. The properties of the introduced layer and its parameters affecting the concentration of minority charge carriers generated by irradiation are analyzed. The reported results of the analysis and calculations can be used to optimize He-ion implantation conditions during the formation of a porous layer.

36 MATERIALS SCIENCE↗