Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Magnetic property, Raman spectroscopy and crystal field analysis of Sm{sub 3+} in Sm(BrO{sub 3}){sub 3}⋅9H{sub 2}O

Single crystals of Sm(BrO{sub 3}){sub 3}⋅9H{sub 2}O (SmBR) were grown and the principal molar susceptibility perpendicular to c-axis (χ{sub ⊥}) was measured from 300 K down to 14 K and χ{sub ‖}, the parallel susceptibility, anisotropy was measured in the temperature range of 300-120 K. A cross-over between χ{sub ‖} and χ{sub ⊥} was observed at ∼ 120 K i.e., below this temperature χ{sub |||}<χ{sub ‖}. Raman spectra of SmBR were recorded in the wave number range of 10-4000 cm{sup −1} and crystal field (CF) Stark energies were extracted from the spectra. A good theoretical simulation of the observed magnetic susceptibilities and observed CF Stark energies of Sm{sup 3+} in SmBR was achieved using the one electron crystal field (CF) interaction with D{sup 3h} site symmetry. The electronic specific heat along with the quadruple splitting and hyperfine heat capacity were calculated by using the results of CF analysis.

36 MATERIALS SCIENCE↗

Sorption Behavior of Cesium Ions on Calcium Aluminosilicate Hydrate under the Condition Saturated with Saline Water - 17096

This study focused on the interaction of cesium (Cs) ions with calcium silicate hydrate (CSH) and calcium aluminosilicate hydrate (CASH) gel, of which sorption effect may retard the migration of Cs ions in the radioactive waste disposal system. In the sorption experiments, the influences of the Al/Si molar ratio of C(A)SH and the curing periods on the sorption of Cs ions into C(A)SH under the saline conditions were examined without drying processes by monitoring the concentrations of Cs, Ca, Si and Al. Besides, Raman spectroscopy were applied to the structure analysis of C(A)SH. As a result, the sorption of Cs ions on C(A)SH became larger with the increase in the Al/Si molar ratios under the all conditions. Furthermore, Raman spectra showed the formation of Al-tetrahedrons and Al-octahedrons, and the increase in the polymerization degree of silicate chain in CASH with adding Al. These results mean that the negative layer-charge of the sheets containing Si- and Al-tetrahedrons and Al-octahedron will accelerate the sorption of Cs ions of positive charge, electrostatically. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Synthesis of bilayer MoS{sub 2} nanosheets by a facile hydrothermal method and their methyl orange adsorption capacity

Highlights: • Hexagonal phase of MoS{sub 2} nanosheets was synthesized by a facile hydrothermal method. • FE-SEM and TEM images show the sheets-like morphology of MoS{sub 2}. • Bilayer MoS{sub 2} can be grown under the optimized mole ratio of 2:1 of S:Mo at 180 °C for 50 h. • The MoS{sub 2} nanosheets possess high methyl orange adsorption capacity due to the large surface area. - Abstract: Molybdenum disulfide (MoS{sub 2}) nanosheets have received significant attention recently due to the potential applications for exciting physics and technology. Here we show that MoS{sub 2} nanosheets can be prepared by a facile hydrothermal method. The study of the properties of the MoS{sub 2} nanosheets prepared at different conditions suggests that the mole ratio of precursors and hydrothermal time significantly influences the purity, crystalline quality and thermal stability of MoS{sub 2}. X-ray diffraction, Raman spectra and transmission electron microscopy results indicate that bilayer MoS{sub 2} can be grown under an optimized mole ratio of 2:1 of S:Mo at 180 °C for 50 h. Moreover, such ultrathin nanosheets exhibit a prominent photoluminescence and possess high methyl orange adsorption capacity due to the large surface area, which can be potentially used in photodevice and photochemical catalyst.

36 MATERIALS SCIENCE↗

Stability of Hydrogen-Bonded Supramolecular Architecture under High Pressure Conditions: Pressure-Induced Amorphization in Melamine−Boric Acid Adduct

The effects of high pressure on the structural stability of the melamine-boric acid adduct (C3N6H6 2H3BO3, M 2B), a three-dimensional hydrogen-bonded supramolecular architecture, were studied by in situ synchrotron X-ray diffraction (XRD) and Raman spectroscopy. M 2B exhibited a high compressibility and a strong anisotropic compression, which can be explained by the layerlike crystal packing. Furthermore, evolution of XRD patterns and Raman spectra indicated that the M 2B crystal undergoes a reversible pressure-induced amorphization (PIA) at 18 GPa. The mechanism for the PIA was attributed to the competition between close packing and long-range order. Ab initio calculations were also performed to account for the behavior of hydrogen bonding under high pressure.

08 HYDROGEN↗

Phase transitions of cesium azide at pressures up to 30 GPa studied using in situ Raman spectroscopy

Cesium azide has been studied by Raman spectroscopy at pressures up to ≈30 GPa at room temperature. The sequence of phase transitions to Phase III (at 0.5 GPa), Phase IV (at 4.3 GPa), and Phase V (at ≈19 GPa) has been observed in agreement with recent X-ray diffraction studies. Phase III has been found to adopt a monoclinic C2/m structure with two azide anions in nonequivalent positions, where one set of azide anions appears to be orientationally disordered according to the observed Raman spectra. The transition to Phase IV has been associated with orientational ordering of azide anions, while the transition to Phase V has been shown to proceed with a lowering of crystal symmetry. Moreover, spectroscopic features indicate a possible change of bonding in CsN{sub 3} toward formation of covalent bonds at high pressures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Soret Effect Study on High-Pressure CO 2 -Water Solutions Using UV-Raman Spectroscopy and a Concentric-Tube Optical Cell

Spatially resolved deep-UV Raman spectroscopy was applied to solutions of CO 2 and H 2 O (or D 2 O), which were subject to a temperature gradient in a thermally regulated high-pressure concentric-tube Raman cell in an attempt to measure a Soret effect in the vicinity of the critical point of CO 2 . Although Raman spectra of solutions of CO 2 dissolved in D 2 O at 10 MPa and temperatures near the critical point of CO 2 had adequate signal-to-noise and spatial resolution to observe a Soret effect with a Soret coefficient with magnitude of |S T | > 0.03, no evidence for an effect of this size was obtained for applied temperature gradients up to 19⁰C. The presence of 1 M NaCl did not make a difference. In contrast, the concentration of CO 2 dissolved in H 2 O was shown to vary significantly across the temperature gradient when excess CO 2 was present, but the results could be explained simply by the variation in CO 2 solubility over the temperature range and not to kinetic factors. For mixtures of D 2 O dissolved in scCO 2 at 10 MPa and temperatures close to the critical point of CO 2 , the Raman peaks for H 2 O were too weak to measure with confidence even at the limit of D 2 O solubility.

99 GENERAL AND MISCELLANEOUS↗

Crystal structure, Raman spectroscopy and microwave dielectric properties of xBa3MgNb2O9–(1-x)Ba2InNbO6 [x = 0.4, 0.6, 0.8]

Highlights: • xBa{sub 3}MgNb{sub 2}O{sub 9}–(1-x)Ba{sub 2}InNbO{sub 6} [x = 0.4, 0.6, 0.8] are synthesized for the first time. • Tetragonal crystal symmetry confirms from Rietveld refinement of XRD & Raman spectra. • τ{sub f} linear with octahedral-distortion. Variation of Q{sub f} with FWHM of ν{sub 1}(O) is analyzed. • Mixing of BIN with BMN improves the microwave dielectric properties of BMN. • For all the materials ε{sub r} > 36 and x = 0.4 and 0.8 materials show high Q{sub f} value than BMN. - Abstract: The dependence of the microwave dielectric properties of xBa{sub 3}MgNb{sub 2}O{sub 9}–(1-x)Ba{sub 2}InNbO{sub 6} [x = 0.4, 0.6, 0.8] on the structural parameters is investigated. The solid-state reaction technique is applied to synthesize these materials and the structural parameters are obtained from the Rietveld refinement of the X-ray diffraction (XRD) data of the samples. The Rietveld refinement confirms the tetragonal crystal structure of all the samples with space group P4/mnc (D{sub 4h}{sup 6}). It has been observed that the Raman shift of the stretching mode ν{sub 1} (BO{sub 6}) and the ionic polarizability of the cations strongly influenced the dielectric constant (ε{sub r}) whereas the value of the quality factor Q{sub f} depends upon the width of ν{sub 1} (BO{sub 6}) mode. It is observed that the temperature coefficient of resonant frequency (τ{sub f}) increases with the increase of the octahedral-distortion in the crystal structure. The factors affecting the microwave dielectric properties are discussed based on the vibrational and structural data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Functional Mn–Mg{sub k} cation complexes in GaN featured by Raman spectroscopy

The evolution of the optical branch in the Raman spectra of (Ga,Mn)N:Mg epitaxial layers as a function of the Mn and Mg concentrations, reveals the interplay between the two dopants. We demonstrate that the various Mn-Mg-induced vibrational modes can be understood in the picture of functional Mn–Mg{sub k} complexes formed when substitutional Mn cations are bound to k substitutional Mg through nitrogen atoms, the number of ligands k being driven by the ratio between the Mg and the Mn concentrations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optical properties of large-area ultrathin MoS{sub 2} films: Evolution from a single layer to multilayers

We investigated the optical properties of ultrathin MoS{sub 2} films (number of layers: N = 1, 2, 4, and 12) using Raman spectroscopy, photoluminescence (PL) spectroscopy, and spectroscopic ellipsometry. We estimated the layer thicknesses based on Raman spectra. We characterized the microstructural properties of a single-layer MoS{sub 2} film using atomic force microscopy. We measured the lowest-energy A and B excitons using PL spectroscopy. We measured the ellipsometric angles (Ψ and Δ) of MoS{sub 2} thin films using spectroscopic ellipsometry, and obtained the dielectric functions as the films' thickness changed from a single layer to multi-layers. We determined the films' optical gap energies from the absorption coefficients. Applying the standard critical point model to the second derivative of the dielectric function (d{sup 2}ε(E)/dE{sup 2}), we determined several critical point energies. The d{sup 2}ε(E)/dE{sup 2} spectra showed doublet peaks around 3 eV corresponding to the C and D transitions, as well as doublet peaks around 2 eV corresponding to the A and B transitions. These doublet structures at 3 eV are attributed to the transitions in the Brillouin zone between the Γ and K points.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Atomate: A high-level interface to generate, execute, and analyze computational materials science workflows

We introduce atomate, an open-source Python framework for computational materials science simula-tion, analysis, and design with an emphasis on automation and extensibility. Built on top of open sourcePython packages already in use by the materials community such as pymatgen, FireWorks, and custodian,atomate provides well-tested workflow templates to compute various materials properties such as elec-tronic bandstructure, elastic properties, and piezoelectric, dielectric, and ferroelectric properties. Atomatealso enables the computational characterization of materials by providing workflows that calculate X-rayabsorption (XAS), Electron energy loss (EELS) and Raman spectra. One of the major features of atomate isthat it provides both fully functional workflows as well as reusable components that enable one to com-pose complex materials science workflows that use a diverse set of computational tools. Additionally,atomate creates output databases that organize the results from individual calculations and contains abuilder framework that creates summary reports for each computed material based on multiplesimulations.

Mathew, Kiran↗

Structural, Morphological, Raman, and Mössbauer Studies on (La{sub 0.8}Ca{sub 0.2}){sub 1−x}Bi{sub x}FeO{sub 3} (x = 0.0, 0.1, and 0.2) Compounds

(La{sub 0.8}Ca{sub 0.2}){sub 1−x}Bi{sub x}FeO{sub 3} (x = 0.0, 0.1, and 0.2) compounds were prepared by the sol-gel method, using the citric acid route. Structural and microstructural characteristics of the samples were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Raman spectroscopy. Mössbauer spectroscopy was also used for magnetic characterization and structural confirmation of X-ray data. Refinement of XRD patterns indicated that the compounds crystallize in an orthorhombic structure, Pnma space group. The SEM measurements showed that the morphology of the samples is characterized by the existence of large agglomerates, while TEM confirmed the fine particle size. Raman spectra revealed that, when increasing temperature, the level of oxygen species adsorbed at the surface of the particles increases progressively. Room temperature Mössbauer spectroscopy data revealed the existence of two octahedral magnetic sites in the structure of the compounds, which is compatible with XRD data, and a small percentage of a paramagnetic phase in the samples, which increases with Bi-content.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strong magnetoelectric and spin phonon coupling in SmFeO{sub 3}/PMN-PT composite

We have investigated spin phonon coupling in the strain coupled magnetoelectric SmFeO{sub 3}/0.65Pb(Mg{sub 1/3}Nb{sub 2/3})O{sub 3}–0.35PbTiO{sub 3} (PMN-PT) composite in the temperature range of 300–650 K by Raman spectroscopy and magnetic measurements. The SmFeO{sub 3}/PMN-PT composite shows sharp rise in magnetic moment across ferroelectric transition temperature (T{sub c}) of PMN-PT. Around this transition temperature (T{sub c} of PMN-PT), the temperature evolution of Raman spectra of the composite also shows anomalies in the phonon frequencies and line width corresponding to the SmFeO{sub 3} phase which indicate structural modifications in the SmFeO{sub 3} phase around T{sub c} of PMN-PT. The observed structural, magnetic, and phonon anomalies of SmFeO{sub 3} around T{sub c} of PMN-PT in SmFeO{sub 3}/PMN-PT are attributed to spin-phonon coupling providing evidence of strong strain mediated magnetoelectric effects.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Pressure-induced structural transformation of CaC{sub 2}

The high pressure structural changes of calcium carbide CaC{sub 2} have been investigated with Raman spectroscopy and synchrotron X-ray diffraction (XRD) techniques in a diamond anvil cell at room temperature. At ambient conditions, two forms of CaC{sub 2} co-exist. Above 4.9 GPa, monoclinic CaC{sub 2}-II diminished indicating the structural phase transition from CaC{sub 2}-II to CaC{sub 2}-I. At about 7.0 GPa, both XRD patterns and Raman spectra confirmed that CaC{sub 2}-I transforms into a metallic Cmcm structure which contains polymeric carbon chains. Along with the phase transition, the isolated C{sub 2} dumbbells are polymerized into zigzag chains resulting in a large volume collapse with 22.4%. Above 30.0 GPa, the XRD patterns of CaC{sub 2} become featureless and remain featureless upon decompression, suggesting an irreversible amorphization of CaC{sub 2}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural, vibrational and photoluminescence properties of Sr{sub (1-x)}Pb{sub x}MoO{sub 4} solid solution synthesized by solid state reaction

Highlights: • The solid solution Sr{sub (1-x)}Pb{sub (x)}MoO{sub 4} is characterized by X-ray diffraction. • Raman spectroscopy confirm that the solid solution is disordered. • Photoluminescence experiments are carried out under X-ray excitation. • Emission bands can be decomposed into four components between 2.1 and 2.9 eV. • The intensities of emission bands reach a maximum for 0.1 < x < 0.4. - Abstract: In this paper, strontium lead molybdate Sr{sub 1-x}Pb{sub x}MoO{sub 4} polycrystalline samples with 0 ≤ x ≤ 1 were prepared by solid state preparation method at 1000 °C. These materials were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and micro-Raman spectroscopy. Their photoluminescence responses were analyzed under X-ray excitation. Rietveld refinements indicate that all the materials present a scheelite-type tetragonal structure. Micro-Raman spectra confirmed the formation of the solid solution with a specific effect due to Sr-O-Mo and Pb-O-Mo links in the scheelite structure. SEM images showed modifications in the shapes and grain sizes as x increased. Broad photoluminescent emission bands were observed in the energy range 2.1–2.9 eV. The emission bands were decomposed into four gaussian components. The intensities of all components presented a strong maximum in the composition range 0.1 < x < 0.4.

36 MATERIALS SCIENCE↗

Pressure-Induced Phase Transition in Hydrogen-Bonded Supramolecular Adduct Formed by Cyanuric Acid and Melamine

Single-crystal samples of the 1:1 adduct between cyanuric acid and melamine (CA {center_dot} M), an outstanding case of noncovalent synthesis, have been studied by Raman spectroscopy and synchrotron X-ray diffraction in a diamond anvil cell up to pressures of 15 GPa. The abrupt changes in Raman spectra around 4.4 GPa have provided convincing evidence for pressure-induced structural phase transition. This phase transition was confirmed by angle dispersive X-ray diffraction (ADXRD) experiments to be a space group change from C2/m to its subgroup P2{sub 1}/m. On release of pressure, the observed transition was irreversible, and the new high-pressure phase was fully preserved at ambient conditions. We propose that this phase transition was due to supramolecular rearrangements brought about by changes in the hydrogen bonding networks.

08 HYDROGEN↗

Preparation and dielectric properties of B-doped SiC powders by combustion synthesis

The SiC(B) solid solution powders were synthesized via combustion reaction of Si/C system in Ar atmosphere, using boron powder as the dopant and polytetrafluoroethylene as the chemical activator, which were investigated by X-ray diffraction (XRD), scanning electronic microscope (SEM) and Raman spectra. Results show that the prepared powders are C-enriched SiC with C antisites and sp{sup 2} carbon defects in which the sp{sup 2} carbon is transformed to the sp{sup 3} carbon due to boron doping. The electric permittivities of the prepared powders were determined in the frequency range of 8.2-12.4 GHz. The dielectric real part {epsilon}' and dielectric loss tan {delta} of undoped powder have maximum values ({epsilon}' = 5.5-5.3, tan {delta} = 0.23-0.20), and decrease with increasing boron content. The mechanism of dielectric loss by doping has been discussed.

36 MATERIALS SCIENCE↗

Local solid phase growth of few-layer graphene on silicon carbide from nickel silicide supersaturated with carbon

Patterned few-layer graphene (FLG) films were obtained by local solid phase growth from nickel silicide supersaturated with carbon, following a fabrication scheme, which allows the formation of self-aligned ohmic contacts on FLG and is compatible with conventional SiC device processing methods. The process was realised by the deposition and patterning of thin Ni films on semi-insulating 6H-SiC wafers followed by annealing and the selective removal of the resulting nickel silicide by wet chemistry. Raman spectroscopy and X-ray photoelectron spectroscopy (XPS) were used to confirm both the formation and subsequent removal of nickel silicide. The impact of process parameters such as the thickness of the initial Ni layer, annealing temperature, and cooling rates on the FLG films was assessed by Raman spectroscopy, XPS, and atomic force microscopy. The thickness of the final FLG film estimated from the Raman spectra varied from 1 to 4 monolayers for initial Ni layers between 3 and 20 nm thick. Self-aligned contacts were formed on these patterned films by contact photolithography and wet etching of nickel silicide, which enabled the fabrication of test structures to measure the carrier concentration and mobility in the FLG films. A simple model of diffusion-driven solid phase chemical reaction was used to explain formation of the FLG film at the interface between nickel silicide and silicon carbide.

77 NANOSCIENCE AND NANOTECHNOLOGY↗