SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Large controlled amounts of helium in uniform concentration in thick samples can be obtained through the radioactive decay of dissolved tritium gas to He3. The term, tritium trick, applies to the case when helium, added by this method, is used to simulate (n,alpha) production of helium in simulated hard flux radiation damage studies.
A detailed description is given of a miniature line-target system that is illuminated by a radioactive source, collimated, and provided with suitable scales to indicate its position within the roll and pitch planes. These components are assembled in a lightweight, goggle that can be precisely positioned by means of a biteboard attachment. Uses of the goggle in the measurements of the perceived direction of space under ordinary and extraordinary test conditions are illustrated. Modifications are suggested that can extend its usefulness.
The experiments in gamma-ray spectrometry to determine the geochemical composition of the lunar surface are reported. The theory is discussed of discrete energy lines of natural radioactivity, and the lines resulting from the bombardment of the lunar surface by high energy cosmic rays. The gamma-ray spectrometer used in lunar orbit and during transearth coast is described, and a preliminary analysis of the results is presented.
A theoretical investigation has been made to design an isotope heat source capable of satisfying the conflicting thermal requirements of steady-state operation and atmosphere entry. The isotope heat source must transfer heat efficiently to a heat exchange during normal operation with a power system in space, and in the event of a mission abort, it must survive the thermal environment of atmosphere entry and ground impact without releasing radioactive material. A successful design requires a compatible integration of the internal components of the heat source with the external aerodynamic shape. To this end, configurational, aerodynamic, motion, and thermal analyses were coupled and iterated during atmosphere entries at suborbital through superorbital velocities at very shallow and very steep entry angles. Results indicate that both thermal requirements can be satisfied by a heat source which has a single stable aerodynamic orientation at hypersonic speeds. For such a design, the insulation material required to adequately protect the isotope fuel from entry heating need extend only half way around the fuel capsule on the aerodynamically stable (wind-ward) side of the heat source. Thus, a low-thermal-resistance, conducting heat path is provided on the opposite side of the heat source through which heat can be transferred to an adjacent heat exchanger during normal operation without exceeding specified temperature limits.
A regular hexagonal prism, having a fineness ratio of 1.67, has been tested in a wind tunnel to determine its static aerodynamic characteristics in a low-density hypervelocity flow. The prism tested was a 1/4-scale model of the graphite heat shield which houses the radioactive fuel for the Viking spacecraft auxiliary power supply. The basic hexagonal prism was also modified to simulate a prism on which ablation of one of the six side flats had occurred. This modified hexagonal prism was tested to determine the effects on the aerodynamic characteristics of a shape change caused by ablation during a possible side-on stable reentry.
Comparison of measurements and calculations of fast neutron spectra from a radioactive neutron source inside spheres of Mo or Pb and from a cylindrical reactor containing a thick Pb or Mo reflector are used as a test of ENDF cross sections. The sphere leakage spectra were measured at a sphere-to-spectrometer distance of 2 meters using a 54 Ci spherical Am-Be neutron source. Reactor leakage spectrum measurements were made at the surface of the ZP-1 reactor when bare, with a Pb radial reflector 21 cm thick, and with a metallic Mo radial reflector 10 cm thick. In the case of the thin Mo sphere there is agreement between the calculation and measurement. The Pb calculation is much lower than the measurement except at the highest neutron energy. Two-dimensional calculations of reactor spectra result indicate that the reactor source is reasonably well known. Significant differences in leakage spectrum shape for both Mo and Pb reflectors suggest that there are large uncertainties in the inelastic cross sections for Pb and some for Mo.
The probable environmental impact and adverse effects of the Lewis Research Center are assessed. The Cleveland and Plum Brook facilities are briefly described. It is felt that the absence of harmful environmental impact from the Cleveland site is apparent, and the monitoring at the Plum Brook reactor facility shows the effectiveness of effluent controls. The probable adverse effects are considered for air, water, and noise pollution, and radioactive and hazardous waste storage and disposal; it is concluded that all emissions are maintained below Federal, and local standards. There are no appropriate alternatives to the operation of the Center, and no improvement in environmental quality would result from relocation. The relationship between local short-term productivity is briefly discussed. No adverse comment has been received from public agencies or private organizations or individuals.
The Backus-Gilbert theory, originally developed for analysis of inversion problems associated with the physics of the solid earth, was applied to the problem of the vertical sounding of the atmosphere by means of remote radiation measurements. An application was made to spectral intervals 2.8/cm wide in the 667/cm band CO2, and tradeoff curves are presented which quantitatively define the relationship between intrinsic vertical resolution and random error in temperature profile estimates. It is found that for a 1-2 K random error with state-of-the-art instrumentation, the intrinsic vertical resolution ranges from approximately 0.5 locale scale height (l.s.h.) in the lower troposphere to greater than 2 l.s.h. in the upper stratosphere with approximately 1 l.s.h. resolution in the vicinity of the tropopause. These values are somewhat smaller than the widths of the radioactive transfer kernels at similar levels. Increasing the number of spectral intervals from 7 to 16 is found to produce only a marginal improvement in vertical resolution.
An alpha particle densitometer was developed for possible application to measurement of the atmospheric density-altitude profile on Martian entry. The device uses an Am-241 radioactive-foil source, which emits a distributed energy spectrum, located about 25 to 75 cm from a semiconductor detector. System response - defined as the number of alphas per second reaching the detector with energy above a fixed threshold - is given for Ar and CO2. The altitude profile of density measurement accuracy is given for a pure CO2 atmosphere with 5 mb surface pressure. The entire unit, including dc-dc converters, requires less than 350 milliwatts of power from +28 volts, weighs about 0.85 lb and occupies less than 15 cubic inches volume.
Steady-state thermal models for the icy satellites are constructed in which the energy released by radioactive decay in the interiors of the satellites is exactly balanced by the net radiative loss from their surfaces. It is shown that the Galilean satellites of Jupiter and the larger satellites of Saturn, Uranus, and Neptune very likely have extensively melted interiors, and most probably contain a core of hydrous silicates, and extensive mantle of ammonia-rich liquid water, and a relatively thin crust of ices. Consequences of this model relating to the Galilean satellites and the rings of Saturn are briefly described. The atmospheric compositions and densities of the large icy satellites and certain features of the retention of volatiles during accretion are discussed.
Evaluation of calculations and experimental evidence from 600-MeV proton irradiation indicating that cosmic-ray-induced radioactivity in detectors used to measure the diffuse gamma-ray background produces a significant counting rate in the energy region around 1 MeV. It is concluded that these counts may be responsible for the observed flattening of the diffuse photon spectrum at this energy.
Potential advantages of fusion power reactors are discussed together with the protection of the public from radioactivity produced in nuclear power reactors, and the significance of tritium releases to the environment. Other subjects considered are biomedical instrumentation, radiation damage problems, low level environmental radionuclide analysis systems, nuclear techniques in environmental research, nuclear instrumentation, and space and plasma instrumentation. Individual items are abstracted in this issue.
Measurement of thermal diffusivity on Apollo 11 type A and type C samples in the temperature range between 150 and 440 K under atmospheric pressure. Thermal diffusivity of type C material is lower and less temperature-dependent than type A material. Both types of samples exhibit lower thermal diffusivities than nonporous terrestrial basalt. The rate of heat generation of Apollo 11 and 12 samples was calculated from the concentrations of radioactive elements: potassium, thorium, and uranium. Apollo 11 crystalline rocks show an average rate of heat generation which is not significantly different from terrestrial basalt. The Th/U ratio does not differ greatly from chondritic and terrestrial averages.
The self-diffusion coefficients were measured by introducing a slab of glass previously irradiated in a reactor between two slabs of unirradiated glass. By heating the specimens, etching them sequentially and determining the radioactivity, self-diffusion coefficients for K and Sr were measured. It is pointed out that the results obtained in the investigations appear to support the proposal that the network of the base glass predominantly controls the activation energy for the diffusion of ions.
Description of a model for radon diffusion through the lunar regolith in which the atom migrates by random walk. The regolith is represented by a system of randomly oriented baffles in which the mean distance which the atom travels between two collisions takes on the role of a mean free path. The effective mean time between two collisions depends on two entities: the actual mean time-of-flight and the mean sticking time on grain surfaces for one collision. The latter depends strongly on the temperature and the heat of adsorption of radon on regolith materials. Both the mean free path as well as the heat of adsorption are either poorly known or unknown for the lunar regolith; hence these quantities are treated as free parameters. Because of the greatly different mean lifetimes against radioactive decay of Rn219, Rn220, and Rn222, the regolith acts as a powerful 'filter' for these species. Rn222 escape is significant (32%) even for a mean free path of 1 micron, a heat of adsorption of 7.0 kcal/mole and a regolith depth of 4 m. Calculations of radon escape from a 4 m thick regolith, using mean free paths of 1, 10, and 80 microns and heats of adsorption of 4.0, 5.2, and 7.0 kcal/mole show that the Rn222/Rn220 escape ratio can be as small as 7.7 and as large as, or larger than 47. The small value of 7.7 is of particular interest, because it is nearly equal to the escape ratio inferred by Turkevich et al. (1970) from their Surveyor 5 results.
The theory for perturbed angular correlations of gamma radiation has been extended to include the possibility of adiabatic variation in the interaction Hamiltonian, K, for the intermediate state. The calculation begins from a polycrystalline model. It is shown that adiabatic variation in K introduces a time dependence into the angles which express the orientation of the molecular frame. The relevance of the adiabatic limit to the use of perturbed angular correlations of gamma radiation for study of the motion of radioactive species in viscous media is discussed.
Lunar heat-flow calculations are carried out for a model moon in which (1) near-surface initial temperatures are very high (as the occurrence of a surface anorthositic layer seems to require), and (2) heat-generating radionuclides are transported upward when melting occurs. Near-surface regions are found to cool and then experience a resurgence of high temperature, as radionuclide-rich magmas from the lunar interior accumulate near the surface. This peaking of near-surface temperature can be brought into correspondence with the episode of vulcanism that gave rise to the basalts represented in the Apollo samples, if we assume relatively high lunar temperatures in early times (due to high initial temperatures, or a high content of radioactive elements, or both).
A brief introduction is given on why Mars is of interest from a biological point of view, along with an overview of the Viking 1975 mission. Details are given about the four biology instruments aboard the spacecraft and the experiments for which they are to be used. These are: the carbon assimilation experiment to determine whether the soil is biologically active; the label release experiment to detect metabolic activity by the release of radioactive CO2 from C-14 labelled simple organic substrates; the gas exchange experiment to detect biological activity by repeated gas chromatography analysis of soil samples; and the light scattering experiment, where increase of scattering and decrease of light transmission would indicate the growth of organisms. Examples are given of data obtained with terrestrial soils in these experiments.