Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Quadrupole”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Shapes and widths of ammonia lines collision-broadened by hydrogen.

Measurement of half-widths and shapes of several rotational lines in nu sub 2 bands of ammonia, collision-broadened by hydrogen. The measurements were made at room temperature with a spectral resolution of 0.15 per cm. Line intensities and self-broadened half-widths were also measured. From the line-intensity data, an estimate of S sub band = 600 plus or minus 30 per sq cm per atm has been derived for the absolute intensity of the pair of bands. Hydrogen-broadened half-widths of all the lines have been found to be equal to 0.075 plus or minus 0.004 per cm per atm. For all the lines measured, shapes of the lines in NH3-H2 collisions seem to conform to the super-Lorenz line shape proposed by Varanasi et al. (1972) for dipole quadrupole collisions.

Varanasi, P.↗

Mass spectra stimulated by O+ and Ar+ interacting with a surface.

Beams of O(+) and Ar(+) in the energy range from 100 to 300 eV were directed into an aperture in one face of a copper box. The mass spectrum from a similar aperture in an adjacent face was observed with the aid of a commercial RF quadrupole spectrometer. On the basis of the results obtained it is reported that O(+) beams at about 200 eV may be essentially lost after a few collisions with a surface, in agreement with similar conclusions about atomic oxygen at thermal energies.

Siegel, M. W.↗

The influence of a crossflow on jet noise

The acoustic field generated by a circular jet in the presence of a low speed crossflow is calculated. The solution is obtained for a quadrupole source located in a uniformly moving acoustic medium. Ribner's work on straight jets is used to model the flow in the turbulent crossflow jet. The movement of the acoustic medium results in the acoustic intensity being greater upstream of the jet flow than at an equal distance downstream. A summary is also presented of the analysis for the acoustic intensity of a crossflow jet which is in motion through a stationary acoustic medium. The analysis is applicable to the noise generated by the lift jet of a V/STOL aircraft under take-off or landing conditions. The results of these two configurations provide a comparision of the directional distribution of acoustic intensity measured in a wind tunnel test of a crossflow jet and in a corresponding flight test.

Cole, J. E., III↗

Determination of contamination character of materials in space technology testing

The contamination character of selected materials used in space technology testing is presented. Many of these materials contain components that become volatile in a space environment. Most previous data were limited to weight loss or vapor pressure. However, these parameters are not necessarily a direct measure of the contamination character of these materials. Selected materials were exposed to a thermal-vacuum environment, and the degree of contamination was measured by collecting the outgases from these materials on a cold test mirror surface. The degradation of reflectivity of the mirror was measured over a spectral range from 1100 A to 2.5 microns. Half the mirror's surface was also exposed to UV irradiation to determine its effects on the contaminative character of the depositing outgases. The amount of deposit per unit area was measured by microbalances mounted near the mirror; the sensor of one microbalance was UV irradiated. A quadrupole mass spectrometer was used to determine the composition of the outgases.

Haynes, D. L.↗

Mie scattering of the interplanetary magnetic field by the whole moon

It is known from the Apollo magnetometer experiments that significant electromagnetic induction takes place in the lunar interior. This induction is excited by fluctuations of the interplanetary magnetic field and is detected by the induced fields on the surface of the moon. These results are reviewed briefly and the formal properties of the theory are discussed. It is shown that the mathematical treatment parallels that for classical electromagnetic scattering. Further the wavelength spectrum of the fluctuations of the interplanetary magnetic field include scales consistent with the radius of the moon. The consequence is that the moon is excited in several modes. Quadrupole and possibly octupole magnetic multipoles are found in the data. The electric type radiation corresponding to transverse magnetic excitation appears suppressed and far below the detection threshold of the magnetometers.

Sonett, C. P.↗

Determination of contamination character of materials in space technology testing

The contamination characters of selected materials used in space technology testing. Specific materials were subjected to a thermal vacuum environment, and the outgases were collected on a cold test mirror surface. Approximately one-half of the surface of the mirror was subjected to ultraviolet irradiation while the outgases were being deposited on the mirror. The purpose of these experiments was to determine the effect of ultraviolet irradiation on the contaminative character of outgases from selected materials. The degree of contamination was measured in terms of degradation of the optical properties of the test mirror and the amount of deposit per unit area on quartz crystal microbalances placed near the test mirror, and by means of quadrupole mass spectral measurements of outgases from the test samples.

Haynes, D. L.↗

Role of gas-surface interactions in the reduction of OGO 6 neutral-particle mass spectrometer data

Data obtained with the quadrupole mass spectrometer aboard the OGO 6 satellite show the effects of significant surface interaction processes, including nearly complete recombination of incoming atomic oxygen on the walls of the instrument antechamber plus absorption and desorption of oxygen and carbon monoxide. The observed data are fit by solving the time-dependent continuity equations accounting for production and loss of atomic oxygen, molecular oxygen, and (in the case of mass 28) carbon monoxide. The surface parameters that best fit the data are selected and applied to the determination of ambient densities and their estimated errors.

Hedin, A. E.↗

Exhaust plume and contamination characteristics of a bipropellant (MMH/N2O4) RCS thruster

Results are presented for three recent tests in a series of thruster contamination experiments made in liquid helium-cooled environmental facility. The contaminating effects encountered on various materials, surfaces, and components, due to the exhaust products from a 5-pound thrust, bipropellant (MMH/N2O4) thruster are investigated. The angular distribution of plume effects around the periphery of the thruster established by transmittance changes of quartz samples over the wavelength range from 0.2 to 2.0 micrometer is studied, along with mass deposition rates at a specific location measured with a quartz crystal microbalance for three different experiments. Quadrupole mass spectrometer measurements of the exhaust products over the mass number range from 12 to 75; infrared transmittance measurements of contaminated samples for the wavelength range from 2.5 to 15 microns; and infrared transmittance measurements of residue from the thruster nozzle are also considered.

Spisz, E. W.↗

Design, fabrication, assembly and delivery of a laboratory prototype of a residual gas analyzer

The design, development, and testing of a wide mass range residual gas analyzer which will be one component of an integrated real time contamination monitor system are described. The instrument has been developed and tested to the laboratory prototype phase, demonstrating the performance that can be expected from a flight instrument of similar design. The instrument's analyzer is of the quadrupole type and a cold cathode ion source is employed as the ionizer. The associated electronics supply all necessary operating and mass sweep voltages for the ionizer, analyzer and electron multiplier ion detector. The instrument features a very fast linear electrometer with automatic range changing. The full mass range of 2 to 300 amu is automatically and repetitively scanned every sixty seconds and suitable telemetry outputs are provided for intensity and mass identification as well as a digital identification of the electrometer range.

Kreisman, W. S.↗

Scattering of 42 MeV alpha particles from copper-65

Beams of 42-MeV alpha particles were elastically and inelastically scattered from Cu-65 in an attempt to excite states which may be described in terms of an excited core model. Angular distributions were measured for 17 excited states. Seven of the excited states had angular distributions similar to a core quadrupole excitation and eight of the excited states had angular distributions similar to a core octupole excitation. The excited state at 2.858 MeV had an angular distribution which suggests that it may have results from the particle coupling to a two-phonon core state. An extended particle-core coupling calculation was performed and the predicted energy levels and reduced transition probabilities compared to the experimental data. The low lying levels are described quite well and the wavefunctions of these states explain the large spectroscopic factors measured in stripping reactions. For Cu-65 the coupling of the particle to the core is no larger weak as in the simpler model, and configuration mixing results.

Stewart, W. M.↗

Line formation in a Jovian atmosphere.

The nominal model of the Jovian atmosphere proposed by Divine (1970) is used as a basis for an interpretation of spectroscopic observations. The results discussed are concerned with those observations which may be quantitatively interpreted, i.e., the R-branch of the 3 nu sub 3 band of methane centered at 1.1 micron, and the hydrogen quadrupole spectrum. The results give a self-consistent model for the structure and composition of the atmosphere, and the radiative properties of the visible cloud layers.

Hunt, G. E.↗

Second virial coefficients for the polar species in steam.

The potential function parameters to fit the data obtained by Kell et al. (1968) are determined. The data of Kell et al. cover the temperature range from 150 to 450 C. Data for the temperature range from 500 to 1000 C are from Sugaware et al. (1964). These calculations have been extended to include OH-OH and OH-H2O pairwise interactions. For the latter interaction the formalism was extended to the case of unequal dipole quadrupole moments in the potential function for the interacting species.

Kubin, R. F.↗

Temperature-dependent hyperfine interactions in Fe2B.

Moessbauer absorption spectra have been observed for Fe2B from 290 to 1175 K. A change in the electric quadrupole interaction was observed from 460 to 480 K and interpreted as a result of the rotation of the easy axis of magnetization as a function of temperature. The effective magnetic hyperfine field is defined as a function of temperature. A discontinuity in the isomer shift of 0.018 (plus or minus 0.010) mm/sec was found across the ferromagnetic transition.

Murphy, K. A.↗

Analysis of organogenic compounds in Apollo 11, 12, and 14 lunar samples.

DCl was used to distinguish hydrocarbons produced by acid treatment from hydrocarbons originally present in the samples when volatiles released by acid and thermal treatments from Apollo 11, 12, and 14 lunar samples were studied by quadrupole mass spectrometry and gas chromatography mass spectrometry. Multiple ion plotting permitted separation of deuterated from nondeuterated hydrocarbons in the DCl products. Stepwise thermal treatment was used to distinguish the source of the volatile compounds. The presence of LM rocket exhaust products was traced in two samples, and the presence of high-temperature stable nitrides in some samples is indicated.

Flory, D. A.↗

Repeated cascade theory of homogeneous turbulence.

The problem of turbulent spectrum engenders two coupled hierarchies: one originates from the development of stress, leading to a transfer function, and the other from the development of an eddy viscosity. In order to incorporate physical roles among scales, the turbulent velocity fluctuation is decomposed into a series of ranks in the increasing order of randomness, contributing successively to energy or stress, eddy viscosity, relaxation frequency, and higher-rank frequencies in the memory chain. As a result, the first hierarchy mentioned above becomes closed at the quadrupole correlation. The second hierarchy governs the eddy viscosities of different ranks, related to relaxation frequencies of such ranks, in the form of a memory chain. It is cut off by an implicit viscous mechanism. For zero wind gradient, the spectrum in the inertial subrange recovers the Kolmogoroff k to the minus 5/3 law with a numerical constant 1.58, in good agreement with experiments. For a strong wind gradient, the spectrum in the production subrange has a k to the minus 1 law.

Tchen, C. M.↗

Moessbauer spectroscopic studies of iron-doped rutile.

Moessbauer spectra were obtained of single crystal and powdered samples of rutile (TiO2) doped to about one percent by weight in isotopically enriched iron. It is shown that the oxidation state may be reversibly altered in situ. After reduction, the oxygen neighbors of the dopant ion are apparently shifted to accomodate the larger ferrous ion. The agreement of calculated quadrupole splittings with experimental results suggests that impurities and oxygen vacancies are uniformly distributed in powdered samples, giving the dopant ions an 'ideal lattice' local environment. The differences between the single crystal and powder sample hyperfine parameters are attributed to variations in stoichiometry, charge compensation mechanisms, or other diffusion related parameters.

Stampfl, P. P.↗

A neutral-atmosphere composition experiment for the Atmosphere Explorer-C, -D, and -E.

The neutral-atmosphere composition experiment instrumentation is designed to obtain in-situ measurements of neutral thermosphere composition from Atmosphere Explorer-C, -D, and -E. The system is based on previously flown OGO-6 and San Marco-3 composition instruments. The mass-spectrometer sensor includes a gold-plated thermalizing chamber and ion source, a hyperbolic rod quadrupole analyzer, and an off-axis electron multiplier. Automatic ion-source sensitivity control and pulse-counting techniques provide density measurement capability from approximately 125 to 1000 km altitude. The normal operating mode includes measurement at all masses in the range of 1 to 44 amu, with emphasis on hydrogen, helium, oxygen, nitrogen, and argon.

Pelz, D. T.↗

The neutral-atmosphere temperature instrument.

The determination of the temperature of the neutral gas at the location of the satellite is based on measurement of the velocity distribution of the molecular nitrogen. Measurement of the thermal-velocity component in the presence of the free-stream velocity will be obtained through application of the velocity-scan technique and, independently, through use of a baffle technique. A 3-cm diameter spherical sampling chamber with a 0.5-cm diameter precisely knife-edged orifice is located at the satellite equator to permit free diffusion of atmosphere gases between the chamber interior and the atmosphere. The spherical chamber is connected through a high-conductance tube to a quadrupole mass-spectrometer sensor to permit accurate quantitative evaluation of the density of the gas.

Spencer, N. W.↗