Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Program Reversal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Interfacial Pressure Improves Calendar Aging of Lithium Metal Anodes

Lithium metal is a very attractive anode material because its theoretical specific capacity is approximately 10 times higher than conventional graphite anodes. Despite great promise, Li anodes suffer from capacity fade due to instabilities with the electrolyte as well as stranding of active Li. We have previously shown that applied interfacial pressure improves Li anode cycling because the pressure reduces the propensity for Li isolation and enables easier reconnection. Many researchers have also shown that calendar aging can lead to Li capacity loss and this has been attributed to either electrolyte decomposition with concurrent Li corrosion or to the formation of stranded Li. Our prior research focused on calendar aging during cycling suggests the mechanism for calendar aging is largely related to stranding of Li during rest and reconnection of the stranded Li upon further cycling, evidenced by similar average Coulombic efficiencies and Li loss in cells with and without rest. Because our calendar aging studies suggest Li stranding as a major cause of Coulombic efficiency drops and our Li cycling studies suggest this can be mitigated partially through applied interfacial pressure, we hypothesized that applied pressure would improve calendar aging by reducing stranded Li and enabling reconnection. We systematically varied applied pressure (0-1000 kPa) on Li metal anodes during cycling tests with and without intermittent calendar aging periods. Though the Coulombic efficiency decreases during aging periods, the lost capacity is recovered during subsequent cycles, as shown though average Coulombic efficiency and cumulative Li capacity loss analysis. We find that application of pressure partially mitigates calendar aging, in accordance with our hypothesis that calendar aging is caused by Li standing and can be mitigated to some degree with interfacial pressure. This is further supported by our results showing that the average Coulombic efficiency and cumulative Li capacity losses are similar over 50 cycles for cells that were continuously cycled and cells with periodic calendar aging periods. This result indicates that the losses during aging are reversible, which is consistent with Li stranding and reconnection. We show that pressure is one mitigation technique that helps reduce Li calendar aging in this study, but our finding that calendar aging is primarily governed by the stranding and reconnection of dead Li has wider implications. This research suggests that other mitigations which have been shown to prevent dead Li formation or encourage reconnection during cycling would also likely be successful for the purpose of improving calendar aging. The authors were supported by a Laboratory Directed Research and Development (LDRD) program. This work was performed, in part, at the Center for Integrated Nanotechnologies, an Office of Science User Facility operated for the U.S. Department of Energy (DOE) Office of Science. Sandia National Laboratories is a multi-mission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC (NTESS), a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy's National Nuclear Security Administration (DOE/NNSA) under contract DE-NA0003525. This written work is authored by an employee of NTESS. The employee, not NTESS, owns the right, title and interest in and to the written work and is responsible for its contents. This work was authored in part by the National Renewable Energy Laboratory, operated by Alliance for Sustainable Energy, LLC, for the U.S. Department of Energy (DOE) under Contract No. DE-AC36-08GO28308. Any subjective views or opinions that might be expressed in the written work do not necessarily represent the views of the U.S. Government.

applied pressure↗

Kinetic studies on the control of the bean rust fungus (Uromyces phaseoli L.) by an inhibitor of polyamine biosynthesis

alpha-Difluoromethylornithine (DFMO), a specific and irreversible inhibitor of the polyamine biosynthetic enzyme ornithine decarboxylase, effectively inhibits mycelial growth of several phytopathogenic fungi on defined media in vitro and provides systemic protection of bean plants against infection by Uromyces phaseoli L. race 0 (MV Rajam, AW Galston 1985 Plant Cell Physiol 26: 683-692; MV Rajam et al. 1985 Proc Natl Acad Sci USA 82: 6874-6878). We now find that application of 0.5 millimolar DFMO to unifoliolate leaves of Pinto beans up to 3 days after inoculation with uredospores of U. phaseoli completely inhibits the growth of the pathogen, while application 4 or 5 days after inoculation results in partial protection against the pathogen. Spores do not germinate on the surface of unifoliolate leaves treated with DFMO 1 day before infection, but addition of spermidine to the DFMO treatments partially reverses the inhibitory effect. The titer of polyamines in bean plants did not decline after DFMO treatment; rather, putrescine and spermidine contents actually rose, probably due to the known but paradoxical stimulation of arginine decarboxylase activity by DFMO.

Non-NASA Center↗

The BESS Program

In nine flights between 1993 and 2002, the Balloon Borne Experiment with a Superconducting Spectrometer (BESS) has measured the energy spectrum of cosmic-ray antiprotons between 0.18 and 4.20 GeV, and the spectra of protons and helium to several hundred GeV. BESS has also placed stringent upper limits on the existence of antihelium and antiduterons. Above about 1 GeV, models in which antiprotons are secondary products of the interactions of primary cosmic rays with the ISM agree with the BESS spectrum. Below 1 GeV, BESS data suggest the presence of an additional source of antiprotons. The antiproton/proton ratios measured between 1993 and 1999, during the Sun's positive-polarity phase, are consistent with simple models of solar modulation. Results from the 2000 flight, following the solar magnetic field reversal, show a sudden increase in the antiproton/proton ratio and tend to favor a charge-sign-dependent drift model. To extend BESS measurements to lower energies, a new instrument, BESS-Polar, is under construction for a flight from Antarctica in 2004.

Mitchell, J. W.↗

Selection of stable reference genes for RT-qPCR in Rhodococcus opacus PD630

Rhodococcus opacus PD630 is a gram-positive bacterium with promising attributes for the conversion of lignin into valuable fuels and chemicals. To develop an organism as a cellular factory, it is necessary to have a deep understanding of its metabolism and any heterologous pathways being expressed. For the purpose of quantifying gene transcription, reverse transcription quantitative PCR (RT-qPCR) is the gold standard due to its sensitivity and reproducibility. However, RT-qPCR requires the use of reference genes whose expression is stable across distinct growth or treatment conditions to normalize the results. Unfortunately, no in-depth analysis of stable reference genes has been conducted in Rhodococcus, inhibiting the utilization of RT-qPCR in R. opacus. In this work, ten candidate reference genes, chosen based on previously collected RNA sequencing data or literature, were examined under four distinct growth conditions using three mathematical programs (BestKeeper, Normfinder, and geNorm). Based on this analysis, the minimum number of reference genes required was found to be two, and two separate pairs of references genes were identified as optimal normalization factors for when ribosomal RNA is either present or depleted. This work represents the first validation of reference genes for Rhodococcus, providing a valuable starting point for future research.

59 BASIC BIOLOGICAL SCIENCES↗

Random vortex method for combusting flows

The random vortex method (RVM) of Chorin was developed by the recirculating flows. The RVM method models turbulence from first principles, tracking the vorticity and obtaining the interaction of vorticity with the bulk flow field. A computer program was produced called MIMOC, Modeling the Interface Motion of Combustion, which can be used to calculate the reacting flow field behind a rearward facing step. Several comparisons between experimental data and calculations were made. The RVM methood computes qualitatively good results, but the quantitative agreement as yet is not completely satisfactory. Much of the difficulty may be caused by the treatment of boundary conditions and the techniques used for obtaining statistical averages of velocities and turbulence quantities. For the rearward facing step the computed reattachment length equals the experimental value. However, the reverse velocity in the recirculation zone is over predicted by 300 percent. In the calculations, a uniform entrance velocity was assumed with no boundary layer at the step lip. This high velocity may be overdriving the reverse flow region.

Marek, C. J.↗

Characterization of thermotropism in primary roots of maize: dependence on temperature and temperature gradient, and interaction with gravitropism

Thermotropism in primary roots of Zea mays L. was studied with respect to gradient strength (degrees C cm-1), temperature of exposure within a gradient, pre-treatment temperature, and gravitropic stimulation. The magnitude of the response decreased with gradient strength. Maximum thermotropism was independent of gradient strength and pre-treatment temperature. The range of temperature for positive and negative thermotropism did not change with pre-treatment temperature. However, the exact range of temperatures for positive and negative thermotropism varied with gradient strengths. In general, temperatures of exposure lower than 25 degrees C resulted in positive tropic responses while temperatures of exposure of 39 degrees C or more resulted in negative tropic responses. Thermotropism was shown to modify and reverse the normal gravitropic curvature of a horizontal root when thermal gradients were applied opposite the 1 g vector. It is concluded that root thermotropism is a consequence of thermal sensing and that the curvature of the primary root results from the interaction of the thermal and gravitational sensing systems.

Non-NASA Center↗

Determining gas hydrate distribution in sands using integrated analysis of well log and seismic data in the Terrebonne Basin, Gulf of Mexico

The Terrebonne Basin is a salt bounded mini-basin in the northeast section of the Walker Ridge protraction area in the Gulf of Mexico, and the main site for an upcoming gas-hydrate focused International Ocean Discovery Program (IODP) cruise. The basin is infilled by an increasingly mud rich sedimentary sequence with several 5-15 meter gas-hydrate filled sand units of Miocene to Pliocene age overlying the up-domed salt. These gas-hydrate filled sand units can be identified in logging while drilling data from two existing wells in the Terrebonne Basin, drilled in 2009 by the Gas Hydrate Joint Industry Project (JIP) Leg 2. The sand units are cross cut by a distinct bottom-simulating reflector (BSR), and are clearly characterized by a polarity reversal in the sand units. The polarity reversal is caused by a positive gas-hydrate filled sand within the stability zone changing to negative gas-bearing sand. Using well data and calculated synthetic seismogram well ties we are able to identify several additional 1-4 meter gas-hydrate and water-saturated sand units associated with thick (100-200 m-thick), fine grained, hydrate bearing fractured units in the upper sedimentary sequence on the seismic data. Following on previous work, we propose that microbial generation of methane occurring within the fine-grained, fractured units acts as a source for gas hydrate formation in the thin sands. In contrast, it has been proposed that the gas hydrate in the 5-15 m-thick sands first discovered by the JIP was originates from a deeper thermogenic source. Through correlating hydrate occurrence in sands from well data, to amplitudes derived from the seismic data, we can estimate possible distribution of hydrate across the basin. Overall, we find the Terrebonne basin to be a complex gas hydrate system with multiple mechanisms of methane generation and migration.

Hillman, Jess↗

Hardware functional obfuscation with ferroelectric active interconnects

Existing circuit camouflaging techniques to prevent reverse engineering increase circuit-complexity with significant area, energy, and delay penalty. In this paper, we propose an efficient hardware encryption technique with minimal complexity and overheads based on ferroelectric field-effect transistor (FeFET) active interconnects. By utilizing the threshold voltage programmability of the FeFETs, run-time reconfigurable inverter-buffer logic, utilizing two FeFETs and an inverter, is enabled. Judicious placement of the proposed logic makes it act as a hardware encryption key and enable encoding and decoding of the functional output without affecting the critical path timing delay. Additionally, a peripheral programming scheme for reconfigurable logic by reusing the existing scan chain logic is proposed, obviating the need for specialized programming logic and circuitry for keybit distribution. Our analysis shows an average encryption probability of 97.43% with an increase of 2.24%/ 3.67% delay for the most critical path/ sum of 100 critical paths delay for ISCAS85 benchmarks.

42 ENGINEERING↗

The numerical calculation of laminar boundary-layer separation

Iterative finite-difference techniques are developed for integrating the boundary-layer equations, without approximation, through a region of reversed flow. The numerical procedures are used to calculate incompressible laminar separated flows and to investigate the conditions for regular behavior at the point of separation. Regular flows are shown to be characterized by an integrable saddle-type singularity that makes it difficult to obtain numerical solutions which pass continuously into the separated region. The singularity is removed and continuous solutions ensured by specifying the wall shear distribution and computing the pressure gradient as part of the solution. Calculated results are presented for several separated flows and the accuracy of the method is verified. A computer program listing and complete solution case are included.

Klineberg, J. M.↗

Effects of NaCl on metabolic heat evolution rates by barley roots

The effect of salinity stress on metabolic heat output of barley (Hordeum vulgare L.) root tips was measured by isothermal microcalorimetry. Several varieties differing in tolerance to salinity were compared and differences quantified. Two levels of inhibition by increasing salt were found. Following the transition from the initial rate of the first level, inhibition remained at about 50% with further increases in salt concentration up to 150 millimolar. The concentration of salt required to inhibit to this level was cultivar dependent. At highter concentrations (>150 millimolar) of salt, metabolism was further decreased. This decrease was not cultivar dependent. The decreased rate of metabolic heat output at the first transition could be correlated with decreases in uptake of NO3-, NH4+, and Pi that occurred as the salt concentration was increased. The high degree of dependence of the inhibition of metabolic heat output on NaCl concentration points to a highly cooperative reaction responsible for the general inhibition of metabolism and nutrient uptake. The time required to attain the first level of salt inhibition is less than 20 minutes. Inhibition of root tips was not reversible by washing with salt free solutions. In addition to revealing these features of salt inhibition, isothermal microcalorimetry is a promising method for convenient and rapid determination of varietal differences in response to increasing salinity.

NASA Discipline Life Support Systems↗

Effects of Buoyancy on Laminar and Turbulent Premixed V-Flame

Turbulent combustion occurs naturally in almost all combustion systems and involves complex dynamic coupling of chemical and fluid mechanical processes. It is considered as one of the most challenging combustion research problems today. Though buoyancy has little effect on power generating systems operating under high pressures (e.g., IC engines and turbines), flames in atmospheric burners and the operation of small to medium furnaces and boilers are profoundly affected by buoyancy. Changes in burner orientation impacts on their blow-off, flash-back and extinction limits, and their range of operation, burning rate, heat transfer, and emissions. Theoretically, buoyancy is often neglected in turbulent combustion models. Yet the modeling results are routinely compared with experiments of open laboratory flames that are obviously affected by buoyancy. This inconsistency is an obstacle to reconciling experiments and theories. Consequently, a fundamental understanding of the coupling between turbulent flames and buoyancy is significant to both turbulent combustion science and applications. The overall effect of buoyancy relates to the dynamic interaction between the flame and its surrounding, i.e., the so-called elliptical problem. The overall flame shape, its flowfield, stability, and mean and local burning rates are dictated by both upstream and downstream boundary conditions. In steady propagating premixed flames, buoyancy affects the products region downstream of the flame zone. These effects are manifested upstream through the mean and fluctuating pressure fields to influence flame stretch and flame wrinkling. Intuitively, the effects buoyancy should diminish with increasing flow momentum. This is the justification for excluding buoyancy in turbulent combustion models that treats high Reynolds number flows. The objectives of our experimental research program is to elucidate flame-buoyancy coupling processes in laminar and turbulent premixed flames, and to characterize microgravity (micro g) premixed flames. The results are used to derive appropriate scaling parameters for guiding the development of theoretical models to include the effects of buoyancy. Knowledge gain from the analysis will also contribute to further understanding of the elliptical nature of premixed flames. Our current emphasis is to examine the momentum limit above which the effects of buoyancy would become insignificant. This is accomplished by comparing the flowfields and the mean properties of normal gravity flames (+g), and reversed gravity flames (-g, up-side-down flames) at different flow velocities and turbulence intensities. Microgravity (micro g) flames experiments provide the key reference data to reconcile the differences between flames in +g and -g. As flame configuration has significant impact on premixed flames characteristics we have studied axi-symmetric conical flames and plane-symmetric rod-stabilized v-flames. The two configurations produce distinct features that dictates how the flames couple with buoyancy. In a conical flame, the hot products plume completely envelopes the flame cone and shields the flame from direct interaction with the ambient air. The plume originates at the burner rim and generates a divergent flowfield. In comparison, the products region of v-flames forms between the twin flame sheets and it is convergent towards the center-plane. Interaction with ambient air is limited to the two end regions of the stabilized rod and beyond the flame sheets.

Cheng, Robert K.↗

Radiological Soil Sorting Considerations and Applications - 19363

A number of methods are available for soil sorting, specifically sorting of radiological materials. These methods have been applied from the Feasibility Study stage of the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) in pilot study operations to full scale operations in the post Record of Decision stages at Formerly Utilized Sites Remedial Action Program (FUSRAP) sites. This application of sorting at multiple sites and under many different conditions has provided the United States Army Corps of Engineers (USACE) with many challenges and lessons learned. Mechanical soil sorting has had varying degrees of success and many factors have been evaluated. Some factors include the type of material that is best suited for sorting, contaminant distribution, and pre-screening of materials. Community acceptance is another non-technical issue that can be key in applying sorting to a FUSRAP cleanup. This paper will discuss multiple types of radiological soil sorting to include reversing belt conveyor, segmented gate, and manual as well as technical considerations and the factors impacting each type. Additionally, how and when soil sorting is applied to FUSRAP operations is discussed. The FUSRAP is conducted in accordance with CERCLA and the impacts to how sorting is applied in terms of considering it treatment under CERCLA will also be discussed. This paper and presentation will be useful for any project considering using radiological soil sorting. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

One-pot catalytic conversion of biomass and alkanes: Kinetically coupling deoxygenation and dehydrogenation pathways

The stoichiometric hydrogen deficiency of carbohydrate feedstock implies that all conversion processes must remove oxygen and concurrently increase hydrogen content to form liquid hydrocarbon products. With support from the DOE Early Career program (DE-SC0008418) we have investigated the use of transition metal carbides for hydrodeoxygenation (HDO) chemistries using CH 4 and H 2 as co-reactants. We report that concurrently processing CH 4 and C 1 -C 3 oxygenates (oxygenate/CH 4 = 0.01-0.1) at 950 K on molybdenum carbide clusters encapsulated in zeolite micropores results in a staged bed with upstream CH 4 reforming and downstream CH 4 dehydroaromatization. Forward rates of CH 4 pyrolysis limited by CH 4 activation are unperturbed by the introduction of oxygenates with a (C/H) eff <0.25 after rigorously accounting for the thermodynamic reversibility caused by the H 2 produced in oxygenate reforming reactions and the fraction of the active catalyst bed deemed unavailable for CH 4 dehydroaromatization. A binomial distribution of 12 C/ 13 C isotopologues of CO is observed upon introduction of CH 3 13 COOH/CH 4 reactants suggesting that the introduction of oxygenates with a (C/H) eff <0.25 results in complete fragmentation of the oxygenate at these temperatures which in turn results in the invariance of forward rates of CH 4 pyrolysis when using CO 2 , HCOOH, or CH 3 COOH co-feeds. The stoichiometric loss of oxygen as CO when co-processing C 1 -C 3 oxygenates and CH 4 at these temperatures demonstrates that (C/H) eff =(C-O)/H is a single valued descriptor for oxygen removal on Mo/HZSM-5 catalysts. Separately, we have demonstrated the utility of transition metal carbides for vapor phase catalytic hydrodeoxygenation using molecular hydrogen with high selectivity for C-O cleavage and near absence of sequential hydrogenation reactions at atmospheric hydrogen pressure and illustrated that the faculty of transition metal carbides for selective hydrodeoxygenation arises due to oxygen-modification of the catalyst in situ. The oxophilic characteristics of these materials engender both the observed acid-metal catalytic bifunctionality and selectivity for hydrodeoxygenation. The evolution of catalyst surface composition and catalytic function under oxidative reaction environments proffers unique challenges in structural characterization of these materials and in this context, we developed and demonstrated the use of chemical titration and chemical transient studies to assess catalytic site identity and densities.

09 BIOMASS FUELS↗

NASA's HITEMP program for UHBR engines

NASA's High Temperature Engine Materials Program (HITEMP) is concerned with the laboratory-scale technology development and feasibility demonstration of high-temperature composite materials, in conjunction with the requisite structural analysis models and test methods for their validation. HITEMP encompasses research on metallic/intermetallic, ceramic, and polymer matrix composites, and is giving attention to high-temperature component composites applicable to future widebody commercial aircraft ultrahigh bypass ratio (UHBR) engines. The UHBR components for which advanced composites are envisioned are fan, compressor, and turbine rotor blades, stator vanes, disks, and shafts, thrust bearings, gearbox bearings and linings, combustor cases and linings, nacelles, and thrust-reversers.

Stephens, Joseph R.↗

The Mars Environmental Compatibility Assessment (MECA) Wet Chemistry Experiment on the Mars 2001 Lander

The Mars Environmental Compatibility Assessment (MECA) is an instrument suite that will fly on the Mars Surveyor 2001 Lander Spacecraft. MECA is sponsored by the Human Exploration and Development of Space (HEDS) program and will evaluate potential hazards that the dust and soil of Mars might present to astronauts and their equipment on a future human mission to Mars. Four elements constitute the integrated MECA payload: a microscopy station, patch plates, an electrometer, and the wet chemistry laboratory (WCL). The WCL consists of four identical cells, each of which will evaluate a sample of Martian soil in water to determine conductivity, pH, redox potential, dissolved C02 and 02 levels, and concentrations of many soluble ions including sodium, potassium, magnesium, calcium and the halides. In addition, cyclic voltammetry will be used to evaluate reversible and irreversible oxidants present in the water/soil solution. Anodic stripping voltammetry will be used to measure concentrations of trace metals including lead, copper, and cadmium at ppb levels. Voltammetry is a general electrochemical technique that involves controlling the potential of an electrode while simultaneously measuring the current flowing at that electrode. The WCL experiments will provide information on the corrosivity and reactivity of the Martian soil, as well as on soluble components of the soil which might be toxic to human explorers. They will also guide HEDS scientists in the development of high fidelity Martian soil simulants. In the process of acquiring information relevant to HEDS, the WCL will assess the chemical composition and properties of the salts present in the Martian soil.

Grannan, S. M.↗

3D Geophysical Inversion Modeling of Ground Magnetic Data at Baker Hot Springs, Washington State, USA

Ground-based magnetic survey data were geophysically modelled in 3D as part of a play fairway exploration program at Baker hot springs. Here, a multi-step inversion method was used to address the issue of remanent magnetization in rocks of the study area. The geophysical modelling effort generated an effective susceptibility model that displays the 3D distribution and orientation of magnetization in the subsurface. Importantly, the magnetic modelling effort found that a strong, dipolar magnetic anomaly observed in the study area can be explained by a remanently magnetized body that is ~1¼ km long x ~200 m wide and extends from ~25-400 m below the surface. Geologically, this body may represent 1) an intrusion of reversely magnetized mafic rocks or 2) a magnetite-bearing fault zone. This rock body coincides spatially with Baker hot springs; the margins of this body or the fault structures within it are likely responsible for providing the permeability that gives rise to the hot springs.

Baker hot springs↗