Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Polycrystalline structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

X-ray spectroscopic study of amorphous and polycrystalline PbO films, α-PbO, and β-PbO for direct conversion imaging

We investigated the electronic structure of Lead Oxide (PbO) – one of the most promising photoconductor materials for direct conversion x-ray imaging detectors, using soft x-ray emission and absorption spectroscopy. Two structural configurations of thin PbO layers, namely the polycrystalline and the amorphous phase, were studied, and compared to the properties of powdered α-PbO and β-PbO samples. In addition, we performed calculations within the framework of density functional theory and found an excellent agreement between the calculated and the measured absorption and emission spectra, which indicates high accuracy of our structural models. Our work provides strong evidence that the electronic structure of PbO layers, specifically the width of the band gap and the presence of additional interband and intraband states in both conduction and valence band, depend on the deposition conditions. We tested several model structures using DFT simulations to understand what the origin of these states is. The presence of O vacancies is the most plausible explanation for these additional electronic states. Several other plausible models were ruled out including interstitial O, dislocated O and the presence of significant lattice stress in PbO.

42 ENGINEERING↗

Simulating EXAFS patterns of shocked crystals

Extended X-ray absorption fine structure (EXAFS) measurements on shocked polycrystalline iron have provided further evidence for the shock induced {alpha}-{epsilon} phase transition in iron. However, recent molecular dynamics investigation of this system has suggested the presence of fcc material in the shocked region. In this paper we will investigate the difficulties in simulating EXAFS signals from molecular dynamics data. We will aim to show that in the case of the shock induced {alpha}-{epsilon} transition EXAFS is insensitive to the type of close packing of the product phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Efficient conversion from UV light to near-IR emission in Yb{sup 3+}-doped triple-layered perovskite CaLaNb{sub 3}O{sub 10}

Graphical abstract: CaRNb{sub 3}O{sub 10} is a self-activated oxide due to charge transfer transition in octahedral NbO{sub 6} groups. CaLaNb{sub 3}O{sub 10}:Yb{sup 3+} presents intense IR emission due to the cooperative energy transfer from host (NbO{sub 6}) to Yb{sup 3+} is responsible. It could be expected to be potentially applicable for enhancing photovoltaic conversion efficiency of Si-based solar cells. - Abstract: Yb{sup 3+}-doped triple-layered perovskite CaLaNb{sub 3}O{sub 10} micro-particles were synthesized via the solid-state reaction method. The crystal structure and morphology of the polycrystalline samples were investigated by X-ray powder diffraction (XRD) and scanning electron microscopy (SEM) measurements, respectively. The reflectance spectra, photoluminescence (PL) excitation and emission spectra, the decay curves, and the absolute quantum efficiency (QE) of the near-infrared (NIR) emission (910–1100 nm) were measured. Under excitation of UV light, Yb{sup 3+}-doped perovskite shows an intense NIR emission attributed to the {sup 2}F{sub 5/2} → {sup 2}F{sub 7/2} transitions of Yb{sup 3+} ions, which could match maximum spectral response of a Si-based solar cell. This is beneficial for its possible application in an enhancement of the photovoltaic conversion efficiency of solar energy utilization. The efficient energy transfer in Yb{sup 3+}-doped CaLaNb{sub 3}O{sub 10} from NbO{sub 6} groups into Yb{sup 3+} ions was confirmed by the spectra and fluorescent decay measurements. Cooperative energy transfer (CET) was supposed to be the NIR emission mechanism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Mn Doping on the Structural, Magnetic, and Magnetocaloric Effect of Fe{sub 17}Dy{sub 2} Compounds

Crystal structural and magnetic properties of polycrystalline (Fe{sub 1−x}Mn{sub x}){sub 17}Dy{sub 2} (x = 0.0, 0.1, 0.2, and 0.3) compounds were studied by X-ray diffraction (XRD) and vibrating sample magnetometer (VSM) measurements. The results show that (Fe{sub 1−x}Mn{sub x}){sub 17}Dy{sub 2} forms as a substitutional solid solution with the hexagonal Th{sub 2}Ni{sub 17} type. The unit cell volume increases with Mn content. The Curie temperature (T{sub C}) can be tuned from 364 K for x = 0.0 to 80 K for x = 0.3. The magnetic transition at T{sub C} is a typical second-order ferromagnetic-paramagnetic transition. For an applied field change from 0 to 5 T, the maximum magnetic entropy change (| − ΔS{sub M}|) for (Fe{sub 1−x}Mn{sub x}){sub 17}Dy{sub 2} (x = 0.0, 0.1, and 0.2) compounds are 3.9, 2.8, and 1.7 J kg{sup −1} k{sup −1}, respectively. The high ΔS{sub M}, appropriate T{sub C}, and a high performance-to-cost ratio make (Fe{sub 1−x}Mn{sub x}){sub 17}Dy{sub 2} compounds a candidate materials for room-temperature magnetic refrigeration applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hydrogen Transport from Dielectrics to poly-Si/SiOx Passivating Contacts Measured by Mass Spectrometry and Vibrational Spectroscopy

We demonstrate the relationship between Si solar cell passivation and hydrogen content of various passivating films, including hydrogenated amorphous silicon (a-Si:H), aluminum oxide (Al2O3), silicon nitride (SiNx) and combinations thereof. Through isotopic studies using quadrupole mass spectrometry (QMS), Fourier transform infrared spectroscopy (FTIR), and Raman spectroscopy, we determine how hydrogen content and stability within each type of film relates to final passivation quality of solar cell test structures. Si solar cells using polycrystalline silicon on silicon oxide (poly-Si/SiOx) passivating contacts are at the forefront of Si solar cell research and emerging as top performers within industrial production. Performance of passivating contact Si solar cells is largely determined by a parameter known as the open-circuit voltage Voc, which directly relates to material quality within the bulk of the device and at surfaces. High Voc is achieved when defects within the bulk crystalline silicon (c-Si) and at interfaces are passivated, preventing them from acting as charge carrier recombination centers. One of the most important means of passivating defects within Si solar cells is via hydrogenation, injecting the cells with large amounts of H to satisfy dangling bonds in the bulk and at interfaces. Hydrogen is especially important in deactivating a prevalent defect in industrial p-type devices which leads to decreased device performance over long-term exposure to light, called light-induced degradation (LID). Some of the most common materials used to supply H to devices are a-Si:H, Al2O3, and SiNx, which can contain very large amounts of H. Upon annealing at elevated temperatures, the hydrogen becomes mobile enough to find and disable defect sites. However, too much hydrogen can also be problematic, sometimes leading to an effect called light and elevated temperature induced degradation (LeTID). It has been shown that these films passivate the interfaces of poly-Si passivating contacts differently, leading to differing performance. Though Al2O3 is a well-defined dielectric material, SiNx can have many different values of x depending on precursor gases and deposition conditions. We observe different FTIR and Raman spectra from different SiNx over a range of x values films to determine the bonding environments within them and further correlate the relative concentrations of Si, N, and H to the stability of H within SiNx and the passivation performance of each film. Because deuterium is chemically identical to hydrogen within these systems, but gives different signals in FTIR and Raman spectroscopy as well as in QMS, isotopic substitution can be used as an excellent tool to probe the H within films. In addition to measuring the H and D bonding within films using FTIR and Raman spectroscopy, we will use such isotopic experiments to observe H and D movement out of these hydrogenating films at elevated temperatures using QMS to determine the stability of H bonding within such systems. With these films characterized based on elemental composition, we will relate such measurements to passivation quality of these films and combinations thereof on poly-Si/SiOx contact structures using quasi-steady state photoconductance decay measurements to obtain implied open-circuit voltage (iVoc) and saturation current density J0 values. Such investigations into the performance of different passivating films and film stacks will lead to greater understanding of dielectrics in semiconductor devices, further improvements in passivated contact design, and eventually, greater proliferation of renewable solar energy worldwide.

Al2O3↗

Imaging the Hydrogen Absorption Dynamics of Individual Grains in Polycrystalline Palladium Thin Films in 3D

Defects such as dislocations and grain boundaries often control the properties of polycrystalline materials. In nanocrystalline materials, investigating this structure-function relationship while preserving the sample remains challenging because of the short length scales and buried interfaces involved. Here we use Bragg coherent diffractive imaging to investigate the role of structural inhomogeneity on the hydriding phase transformation dynamics of individual Pd grains in polycrystalline films in three-dimensional detail. In contrast to previous reports on single- and polycrystalline nanoparticles, we observe no evidence of a hydrogen-rich surface layer and consequently no size dependence in the hydriding phase transformation pressure over a 125-325 nm size range. We do observe interesting grain boundary dynamics, including reversible rotations of grain lattices while the material remains in the hydrogen-poor phase. The mobility of the grain boundaries, combined with the lack of a hydrogen-rich surface layer, suggests that the grain boundaries are acting as fast diffusion sites for the hydrogen atoms. Such hydrogen-enhanced plasticity in the hydrogen poor phase provides insight into the switch from the size-dependent behavior of single-crystal nanoparticles to the lower transformation pressures of polycrystalline materials and may play a role in hydrogen embrittlement.

Yau, Allison↗

Quantitative study of the effect of grain boundary parameters on the slip system level Hall-Petch slope for basal slip system in Mg-4Al

Several theoretical studies have reported that the geometry and structure of grain boundaries in polycrystalline materials could impose a significant effect on the Hall-Petch slope. However, experimental observations are primarily limited by the ability of the techniques to accurately quantify the grain boundary strength and validate these theoretical models. Using high-resolution electron backscatter diffraction (HR-EBSD), the local stress tensor ahead of a slip band blocked by a grain boundary was quantified and coupled with a continuum dislocation pile-up model to assess the barrier strength of specific grain boundaries to specific slip systems, referred to as micro-Hall-Petch coefficient. For basal slip system in a deformed Mg-4Al alloy, the micro-Hall-Petch coefficient ($k^{basal}_{μ}$) varied significantly, from 0.054 to 0.184 MPa - m 1/2 for nine different grain boundaries. These results were correlated with geometric descriptors of the respective grain boundaries, with three-dimensional GB profile additionally measured via focused ion beam milling. It was found that the angle between the two slip plane traces on the grain boundary plane was the most sensitive parameter affecting $k^{basal}_{μ}$, followed by the angle between the slip directions. A functional form for calculation of $k^{basal}_{μ}$ depending on these two angles is proposed to augment crystal plasticity constitutive models with slip resistance dependent on some measure of the grain size. The method allows a new pathway to calibrate grain size strengthening parameters in crystal plasticity models, allowing further computational investigations of the interrelationship between texture, grain morphology, and the Hall Petch effect.

36 MATERIALS SCIENCE↗

Remarkable enhancement of La{sub (1-x)}Sm{sub x}CrO{sub 3} nanoperovskite properties: An influence of its doping concentrations

Highlights: • LSCO solid solutions have been synthesized using ball milling method for first time. • Highly polycrystalline single phase LSCO with tolerance factor 0.8 < T > 0.9. • Effective occupancy of dopants onto the respective lattice site is analyzed. • Exhibits dendritic morphology and aggregates with decreasing dopant concentrations. • Synthesized LSCO nanoperovskites exhibit room temperature antiferromagnetism. - Abstract: Rare earth orthochromites of type La{sub (1-x)}Sm{sub x}CrO{sub 3} ((LSCO) x = 0, 0.1, 0.3, 0.5) have been synthesized through solid state reaction. These polycrystalline samples exhibit orthorhombic crystal structure and its corresponding distortion depends on the dopant concentrations. With increasing dopant stoichiometry, the A-O bond length changes resulting in the augmentation of perovskite’s physical properties. The occupancy of relatively less ionic radii dopant influences the decrease in crystallite size, blue shift in emission spectrum and intensification of the phonon characteristic vibrations. The finer particles aggregate to form dendritic morphology and become distinct on Sm/La ratio increments as identified from electron micrographs and atomic force microscopy. Ambient temperature magnetization analysis reveals the enhancement of antiferromagnetic nature upon dopant increments.

36 MATERIALS SCIENCE↗

Synthesis and electrical properties of Cu-doped tin oxide nanowires

We report on atmospheric pressure growth of Cu-doped Tin oxide nanowires by thermal evaporation method. Scanning-electron-microscopic analysis shows the growth of wire-like SnO{sub 2} nanostructures (diameter Almost-Equal-To 80 nm and length Almost-Equal-To 70 {mu}m) on gold catalyzed silicon substrate. The as-synthesized Cu-doped SnO{sub 2} nanowires show polycrystalline nature with tetragonal rutile structure. EDX analysis confirms that Cu ( Almost-Equal-To 0.7 at%) have been uniformly doped into SnO{sub 2} nanowires. Electrical measurement of Cu-doped SnO{sub 2} nanowires concludes their resistance of about 5 M{Omega} at room temperature.

36 MATERIALS SCIENCE↗

Enhanced ferromagnetic properties in Ho and Ni co-doped BiFeO{sub 3} ceramics

The magnetic properties of polycrystalline Bi{sub 1-x}Ho{sub x}Fe{sub 1-y}Ni{sub y}O{sub 3} (x = 0, 0.1; y = 0, 0.03), which were prepared by the solid-state method, have been investigated. The powder X-ray diffraction reveals that all the samples are polycrystalline and show rhombohedral perovskite structure. The micro-Raman scattering studies confirm that Bi{sub 0.9}Ho{sub 0.1}Fe{sub 0.97}Ni{sub 0.03}O{sub 3} has a compressive lattice distortion induced by the simultaneous substitution of Ho and Ni ions at A and B-sites, respectively. From the magnetization dependences at room temperature, Bi{sub 0.9}Ho{sub 0.1}Fe{sub 0.97}Ni{sub 0.03}O{sub 3} has enhanced magnetization (0.2280 emu/g) and low coercive field (280 Oe). It was revealed that the Ni dopant plays an important role for the improved ferromagnetic properties and the Ho dopant favors the magnetic exchange interactions in the co-doped ceramic.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of gamma ray irradiation on the structural and electrical transport properties of PrFe{sub 1−x}Mn{sub x}O{sub 3}

The effect of gamma ray irradiation on the structural and transport properties of polycrystalline bulk samples of PrFe{sub 1−x}Mn{sub x}O{sub 3} (x = 0.0, 0.1, 0.5) were investigated. The samples were synthesized by solid state reaction method and exposed to {sup 60}Co gamma radiation to accumulated dose of 625 KGy. From the Raman study, the modes exhibit a blue shift with broadening of spectral features in the irradiated samples. The dielectric constant (ε′) was also studied as a function of frequency. The dielectric constant and ac conductivity increases with Mn doping but decrease on irradiation. Exposure to gamma radiation results in substantial modification in the physical properties of these compounds.

36 MATERIALS SCIENCE↗

Structure of the near-surface layer of NiTi on the meso- and microscale levels after ion-beam surface treatment

Using the EBSD, SEM and TEM methods, the structure of surface layer of polycrystalline NiTi alloy samples was examined after the modification of material surface by the pulsed action of mean-energy silicon ion beam. It was found that the ion beam treatment would cause grain fragmentation of the near-surface layer to a depth 5÷50 μm; a higher extent of fragmentation was observed in grains whose close-packed planes were oriented approximately in the same direction as the ion beam was. The effect of high-intensity ion beam treatment on the anisotropic behavior of polycrystalline NiTi alloy and the mechanisms involved were also examined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of precursor concentration on the properties of spray deposited CdO thin films

Cadmium oxide (CdO) thin films of thickness 50 to 200 nm were deposited on glass substrates maintained at 400°C using spray pyrolysis technique. CdO thin films were deposited by varying the molar concentrations of cadmium acetate solution such as 0.01, 0.05, 0.1, 0.15 and 0.2 M. X-ray diffraction studies reveal that the films are polycrystalline in nature with cubic structure. SEM images show that the films have well defined spherical grains and grain boundaries are seen. Optical studies reveal that the films prepared from solution of 0.01 and 0.1M concentration have high transparency than films prepared at other solution concentration. The optical energy band gap value decreases from 2.50 to 2.37eV with the increase in molar concentration. Electrical studies revealed that the CdO thin film prepared using 0.1M solution possesses lowest resistivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Antiferromagnetism in the van der Waals layered spin-lozenge semiconductor CrTe 3

We have investigated the crystallographic, magnetic, and transport properties of the van der Waals bonded, layered compound CrTe 3 on single-crystal and polycrystalline materials. Furthermore, the crystal structure contains layers made up of lozenge-shaped Cr 4 tetramers. Electrical resistivity measurements show the crystals to be semiconducting, with a temperature dependence consistent with a band gap of 0.3 eV. The magnetic susceptibility exhibits a broad maximum near 300 K characteristic of low dimensional magnetic systems. Weak anomalies are observed in the susceptibility and heat capacity near 55 K, and single-crystal neutron diffraction reveals the onset of long-range antiferromagnetic order at this temperature. Strongly dispersive spin waves are observed in the ordered state. Significant magnetoelastic coupling is indicated by the anomalous temperature dependence of the lattice parameters and is evident in structural optimization in van der Waals density functional theory calculations for different magnetic configurations. The cleavability of the compound is apparent from its handling and is confirmed by first-principles calculations, which predict a cleavage energy 0.5 J / m 2 , similar to graphite. Based on our results, CrTe 3 is identified as a promising compound for studies of low dimensional magnetism in bulk crystals as well as magnetic order in monolayer materials and van der Waals heterostructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical and optical properties of Nb-doped TiO{sub 2} films deposited by dc magnetron sputtering using slightly reduced Nb-doped TiO{sub 2-x} ceramic targets

Nb-doped anatase TiO{sub 2} films were deposited on unheated glass by dc magnetron sputtering using slightly reduced Nb-doped TiO{sub 2-x} targets (Nb concentration: 3.7 and 9.5 at. %) with various hydrogen or oxygen flow ratios. After postannealing in a vacuum (6x10{sup -4} Pa) at 500 deg. C for 1 h, both films were crystallized into the polycrystalline anatase TiO{sub 2} structure. The resistivity decreased from 1.6x10{sup -3} to 6.3x10{sup -4} {Omega} cm with increasing Nb concentration from 2.8 to 8.0 at. %, where the carrier density increased from 5.4x10{sup 20} to 2.0x10{sup 21} cm{sup -3} and the Hall mobility was almost constant at 5-7 cm{sup 2} V{sup -1} s{sup -1}. The films exhibited a high transparency of over 60%-80% in the visible region.

36 MATERIALS SCIENCE↗

Structure and Dielectric Properties of Bi{sub 1 –} {sub x}Sm{sub x}FeO{sub 3} Nanostructured Ceramics

Structure and dielectric properties of polycrystalline multiferroics of Bi{sub 1 –} {sub x}Sm{sub x}FeO{sub 3} (x = 0–0.2) system are studied. Using X-ray diffraction, two coexisting phases (rhombohedral R3c and orthorhombic Pbam) are found in the nanostructured sample with x = 0.1. Four anomalies characteristic for phase transitions are found near temperatures of ~180, 250, 300°C and T{sub N} at ~350°C on temperature dependences of permittivity ε'(T). It is shown that when samarium content is increased, the permittivity ε' grows and tanδ decreases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Biomineral mesostructure

Abstract Biominerals formed by animals are most frequently calcium carbonate or phosphate polycrystalline materials with complex hierarchical structures. This article will focus on the 10-nm–10-µm scale, termed “mesoscale,” at which the “mesostructure” differs greatly across biominerals, is relevant to their mechanical properties, and reveals formation mechanisms in sea urchin teeth, mollusk shell prisms and nacre, human enamel, and coral skeletons. This article will conclude by focusing on important unanswered questions to inspire future research. Graphical abstract

36 MATERIALS SCIENCE↗

Fundamental Processes of Coupled Radiation Damage and Mechanical Behavior in Nuclear Fuel Materials for High Temperature Reactors

The objective of this work has been to elucidate the relationship among microstructure, radiation damage and mechanical properties for nuclear fuel materials. As representative nuclear materials, we have taken an hcp metal (Mg as a generic metal, and Ti alloys for fast reactors) and UO2 (representing fuel). The degradation of the thermo-mechanical behavior of nuclear fuels under irradiation, both the fissionable material itself and its cladding, is a longstanding issue of critical importance to the nuclear industry. There are experimental indications that nanocrystalline metals and ceramics may be more resistant to radiation damage than their coarse-grained counterparts. The objective of this project look at the effect of microstructure on radiation damage and mechanical behavior in these materials. The approach to be taken was state-of-the-art, large-scale atomic-level simulation. This systematic simulation program of the effects of irradiation on the structure and mechanical properties of polycrystalline Ti and UO2 identified radiation damage mechanisms. Moreover, it will provided important insights into behavior that can be expected in nanocrystalline microstructures and, by extension, nanocomposites. The fundamental insights from this work can be expected to help in the design microstructures that are less susceptible to radiation damage and thermomechanical degradation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗