Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Perturbative methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Computational study of nonlinear plasma waves. I - Simulation model and monochromatic wave propagation. II - Sideband instability and satellite growth

A hybrid plasma simulation model is described and applied to the study of electrostatic wave propagation in a one-dimensional Maxwellian plasma with periodic boundary conditions. The model employs a cloud-in-cell scheme which can drastically reduce the fluctuations in particle simulation models and greatly ease the computational difficulties of the Vlasov equation approach. A grid in velocity space is introduced and the particles are represented by points in the x-v phase space. The model is tested first in the absence of an applied signal and then in the presence of a small-amplitude perturbation. The method is also used to study propagation of an essentially monochromatic plane wave. Results on amplitude oscillation and nonlinear frequency shift are compared with available theories.

Matsuda, Y.↗
NASA NTRS1975

A uniformly valid solution for motion about the interior libration point of the perturbed elliptic-restricted problem

Bounded motion about Lagrange collinear libration points is considered for a perturbed elliptic-restricted problem. A practical application is the motion of a satellite near a libration point collinear with the sun and the earth-moon barycenter. Such a system is treated here as an earth-sun-satellite elliptic restricted problem with lunar perturbations. The method of dual time scales is utilized to develop a uniformly valid three-dimensional analytical solution to the satellite's equations of motion. The analytical development applies somewhat generally to that class of four-body problems where the second primary mass is much greater than the first, and the third primary mass is much greater than the second.

Richardson, D. L.↗
NASA NTRS1979

Analytic theory of orbit contraction due to atmospheric drag

Theory of space vehicle flight in near vacuum and in a planetary atmosphere is unified for the case of a spherically symmetric atmosphere with exponential variation of density with height. Dimensionless equations of motion are established that bridge the gap between satellite theory and entry theory. Integration is done by Poincare's method of perturbations. Solutions for the dimensionless semimajor axis are numerically obtained.

Vinh, N. X.↗
NASA NTRS1984

Scattering of electrons from neon atoms

Scattering of electrons from neon atoms is investigated by the polarized-orbital method. The perturbed orbitals calculated with use of the Sternheimer approximation lead to the polarizability 2.803 a(0)-cube in fairly good agreement with the experimental value 2.66 a(0)-cube. Phase shifts for various partial waves are calculated in the exchange, exchange-adiabatic, and polarized-orbital approximations. They are compared with the previous results. The calculated elastic differential, total, and momentum-transfer cross sections are compared with the experimental results. The polarized-orbital approximation yields results which show general improvement over the exchange-adiabatic approximation.

Dasgupta, A.↗
NASA NTRS1986

Test of the Hipparcos payload in the Liege vacuum facility focal

The Liege thermal vacuum optical bench (FOCAL) was used to control the mechanical stability of the structure of the European Space Agency's HIPPARCOS astrometry payload. The payload is designed to measure angles of .001 arcsec between stars during 2.5 years and this accuracy can only be reached with the extreme stability of the device. The structure of the payload is made of carbon fiber; it is thermally stabilized with an accuracy of .01 degrees C. During the test, the payload is enclosed in a shell made of shrouds having a geometry close to the shading structure of the spacecraft. The shroud temperatures are defined by the conditions in orbit, e.g., the spacecraft is spinning in front of the Sun with a period of two hours and the temperature of the shrouds is cycled around the payload with a 2 hour period. In order to avoid disturbances by vibrations, the payload is put on an adapter interfaced with the optical bench and the seismic block; the shrouds are supported by a carrier with no direct interface with the table. This method avoids perturbances brought about by the cooling fluid of the shrouds.

Jamar, C.↗
NASA NTRS1987

Torsion effect on fully developed flow in a helical pipe

Two techniques, a series expansion method of perturbed Poiseuille flow valid for low Dean numbers and a solution of the complete Navier-Stokes equation applicable to intermediate Dean values, are used to investigate the torsion effect on the fully developed laminar flow in a helical pipe of constant circular cross section. For the secondary flow patterns, the results show that the presence of torsion can produce a significant effect if the ratio of the curvature to the torsion is of order unity. The secondary flow is distorted in these cases. It is noted that the torsion effect is, however, usually small, and that the secondary flow has the usual pattern of a pair of counter-rotating vortices of nearly equal strength.

Kao, Hsiao C.↗
NASA NTRS1987

Sliding regimes on slow manifolds of systems with fast actuators

In this article the slow manifold of a system with actuator parasitics is used as a sliding surface on which a Variable Structure Controller recovers the qualitative properties of the reduced order, closed loop system obtained from an ideal actuator-based feedback controller design. Illustrative examples are presented, where (1) the simplicity of reduced order singular perturbation design methods; and (2) the robustness of Variable Structure sliding modes, are advantageously combined.

Sira-Ramirez, Hebertt↗
NASA NTRS1988

Planetary detection techniques - An overview

Interest in the search for planets around other stars is due to its connection with SETI, the desire to understand the formation of stars and planetary systems, and curiosity about the earth's place in the cosmic neighborhood. Proposed techniques include direct imaging, detection of transits, and detection of stellar radial velocity and positional perturbations. Each method has advantages and is effective at detecting different kinds of planets. It is concluded that the fundamental questions in this field should be answered during the next decade.

Scargle, J. D.↗
NASA NTRS1989

Time-resolved simplified chemical kinetics modelling using computational singular perturbation

A CO-CH4-air reaction system is used to demonstrate the computational singular perturbation (CSP) method for deriving time-resolved simplified chemical kinetics models. CSP provides a programmable algorithm to group the given collection of elementary reactions into reaction groups which are ordered according to their speed. The concept of Importance Index k(m)exp s is introduced: k(m)exp s is defined to be a number between 0 and 1 which measures the importance of the m-th reaction group to the s-th reactant and can readily be computed from data generated by CSP. It is suggested that the robustness of the solutions of the reaction system can be qualitatively assessed by inspecting the Importance Index data.

Lam, S. H.↗
NASA NTRS1989

Numerical investigation of the control of the secondary instability process in boundary layers

A numerical model has been developed for investigating boundary layer transition control for a flat plate boundary layer. Active control of a periodically forced boundary layer in an incompressible fluid is studied using surface heating techniques. The spatially evolving boundary layer is simulated. The Navier-Stokes and energy equations are integrated using a fully implicit finite difference/spectral method. Temperature perturbations are introduced locally along finite heater strips to directly attenuate the instability waves in the flow. A feedback control loop is employed in which a downstream sensor is used to monitor wall shear stress fluctuations. Active control of small amplitude two-dimensional and three-dimensional disturbances is numerically simulated. With proper phase control, in-phase reinforcement and out-of-phase attenuation are demonstrated. A receptivity study of the localized temperature perturbations is made. It is shown that narrow heater strips are more receptive in that they maximize the amplitude level of the disturbances in the flow. Active control of the early stages of the fundamental breakdown process is also numerically simulated. Control is achieved with either two-dimensional or three-dimensional control inputs.

Kral, L. D.↗
NASA NTRS1990

Reduced and simplified chemical kinetics for air dissociation using Computational Singular Perturbation

The Computational Singular Perturbation CSP methods is employed (1) in the modeling of a homogeneous isothermal reacting system and (2) in the numerical simulation of the chemical reactions in a hypersonic flowfield. Reduced and simplified mechanisms are constructed. The solutions obtained on the basis of these approximate mechanisms are shown to be in very good agreement with the exact solution based on the full mechanism. Physically meaningful approximations are derived. It is demonstrated that the deduction of these approximations from CSP is independent of the complexity of the problem and requires no intuition or experience in chemical kinetics.

Goussis, D. A.↗
NASA NTRS2001

Inductive Measurement of Plasma Jet Electrical Conductivity (MSFC Center Director's discretionary Fund)

Measurement of plasma jet electrical conductivity has utility in the development of explosively driven magnetohydrodynamic (MHD) energy converters as well as magnetic flux compression reaction chambers for nuclear/chemical pulse propulsion and power. Within these types of reactors, the physical parameter of critical importance to underlying MHD processes is the magnetic Reynolds number, the value of which depends upon the product of plasma electrical conductivity and velocity. Therefore, a thorough understanding of MHD phenomena at high magnetic Reynolds number is essential, and methods are needed for the accurate and reliable measurement of electrical conductivity in high-speed plasma jets. It is well known that direct measurements using electrodes suffer from large surface resistance, and an electrodeless technique is desired. To address this need, an inductive probing scheme, originally developed for shock tube studies, has been adapted. In this method, the perturbation of an applied magnetic field by a plasma jet induces a voltage in a search coil, which, in turn, can be used to infer electrical conductivity through the inversion of a Fredholm integral equation of the first kind. A 1-in.-diameter probe using a light-gas gun. Exploratory laboratory experiments were carried out using plasma jets expelled from 15-g shaped charges. Measured conductivities were in the range of 4 kS/m for unseeded octol charges and 26 kS/m for seeded octol charges containing 2-percent potassium carbonate by mass.

Turner, M. W.↗
NASA NTRS2005

Inductive Measurement of Plasma Jet Electrical Conductivity

An inductive probing scheme, originally developed for shock tube studies, has been adapted to measure explosive plasma jet conductivities. In this method, the perturbation of an applied magnetic field by a plasma jet induces a voltage in a search coil, which, in turn, can be used to infer electrical conductivity through the inversion of a Fredholm integral equation of the first kind. A 1-inch diameter probe was designed and constructed, and calibration was accomplished by firing an aluminum slug through the probe using a light-gas gun. Exploratory laboratory experiments were carried out using plasma jets expelled from 15-gram high explosive shaped charges. Measured conductivities were in the range of 3 kS/m for unseeded octol charges and 20 kS/m for seeded octol charges containing 2% potassium carbonate by mass.

Turner, Matthew W.↗
NASA NTRS1999

A More Accurate and Efficient Technique Developed for Using Computational Methods to Obtain Helical Traveling-Wave Tube Interaction Impedance

The phenomenal growth of commercial communications has created a great demand for traveling-wave tube (TWT) amplifiers. Although the helix slow-wave circuit remains the mainstay of the TWT industry because of its exceptionally wide bandwidth, until recently it has been impossible to accurately analyze a helical TWT using its exact dimensions because of the complexity of its geometrical structure. For the first time, an accurate three-dimensional helical model was developed that allows accurate prediction of TWT cold-test characteristics including operating frequency, interaction impedance, and attenuation. This computational model, which was developed at the NASA Lewis Research Center, allows TWT designers to obtain a more accurate value of interaction impedance than is possible using experimental methods. Obtaining helical slow-wave circuit interaction impedance is an important part of the design process for a TWT because it is related to the gain and efficiency of the tube. This impedance cannot be measured directly; thus, conventional methods involve perturbing a helical circuit with a cylindrical dielectric rod placed on the central axis of the circuit and obtaining the difference in resonant frequency between the perturbed and unperturbed circuits. A mathematical relationship has been derived between this frequency difference and the interaction impedance (ref. 1). However, because of the complex configuration of the helical circuit, deriving this relationship involves several approximations. In addition, this experimental procedure is time-consuming and expensive, but until recently it was widely accepted as the most accurate means of determining interaction impedance. The advent of an accurate three-dimensional helical circuit model (ref. 2) made it possible for Lewis researchers to fully investigate standard approximations made in deriving the relationship between measured perturbation data and interaction impedance. The most prominent approximations made in the analysis were addressed and fully investigated for their accuracy by using the three-dimensional electromagnetic simulation code MAFIA (Solution of Maxwell's Equations by the Finite Integration Algorithm) (refs. 3 and 4). We found that several approximations introduced significant error (ref. 5).

Kory, Carol L.↗
NASA NTRS2011

Highly Accurate Quartic Force Fields, Vibrational Frequencies, and Spectroscopic Constants for Cyclic and Linear C3H3(+)

High levels of theory have been used to compute quartic force fields (QFFs) for the cyclic and linear forms of the C H + molecular cation, referred to as c-C H + and I-C H +. Specifically the 33 3333 singles and doubles coupled-cluster method that includes a perturbational estimate of connected triple excitations, CCSD(T), has been used in conjunction with extrapolation to the one-particle basis set limit and corrections for scalar relativity and core correlation have been included. The QFFs have been used to compute highly accurate fundamental vibrational frequencies and other spectroscopic constants using both vibrational 2nd-order perturbation theory and variational methods to solve the nuclear Schroedinger equation. Agreement between our best computed fundamental vibrational frequencies and recent infrared photodissociation experiments is reasonable for most bands, but there are a few exceptions. Possible sources for the discrepancies are discussed. We determine the energy difference between the cyclic and linear forms of C H +, 33 obtaining 27.9 kcal/mol at 0 K, which should be the most reliable available. It is expected that the fundamental vibrational frequencies and spectroscopic constants presented here for c-C H + 33 and I-C H + are the most reliable available for the free gas-phase species and it is hoped that 33 these will be useful in the assignment of future high-resolution laboratory experiments or astronomical observations.

Huang, Xinchuan↗
NASA NTRS2012

Computational Optimization of a Natural Laminar Flow Experimental Wing Glove

Computational optimization of a natural laminar flow experimental wing glove that is mounted on a business jet is presented and discussed. The process of designing a laminar flow wing glove starts with creating a two-dimensional optimized airfoil and then lofting it into a three-dimensional wing glove section. The airfoil design process does not consider the three dimensional flow effects such as cross flow due wing sweep as well as engine and body interference. Therefore, once an initial glove geometry is created from the airfoil, the three dimensional wing glove has to be optimized to ensure that the desired extent of laminar flow is maintained over the entire glove. TRANAIR, a non-linear full potential solver with a coupled boundary layer code was used as the main tool in the design and optimization process of the three-dimensional glove shape. The optimization process uses the Class-Shape-Transformation method to perturb the geometry with geometric constraints that allow for a 2-in clearance from the main wing. The three-dimensional glove shape was optimized with the objective of having a spanwise uniform pressure distribution that matches the optimized two-dimensional pressure distribution as closely as possible. Results show that with the appropriate inputs, the optimizer is able to match the two dimensional pressure distributions practically across the entire span of the wing glove. This allows for the experiment to have a much higher probability of having a large extent of natural laminar flow in flight.

Hartshom, Fletcher↗
NASA NTRSDate not supplied

Quantifying Changes in the Arctic Shortwave Cloud Radiative Effects

The shortwave cloud radiative effect (SWCRE) is important on the Arctic surface radiation budget and the major source of inter-model spread in predictions of Arctic climate. To better understand the individual contributions of various radiative processes to changes in SWCRE, the paper presents the use of the extended APRP (Atmospheric Radiative Perturbation Potential) method. This involves adding the absorptivity for the upward beam and considering differences in reflectivity between upward and downward beams, as well as analyzing the cloud masking effect resulting from changes in surface albedo in more detail. Using data from the CMIP5 and CMIP6 climate models, the study decomposes the SWCRE over the Arctic surface and analyzes inter-model differences in quadrupled CO2 simulations. The study takes into account the fact that the response of SWCRE to Arctic warming is influenced by changes in surface albedo, cloud amount, and cloud microphysics. Results show that in the sunlight season, the reduction in surface albedo associated with sea ice loss is directly linked to strong negative SWCRE, which explains the considerable model discrepancy. Arctic clouds can hinder the positive surface albedo feedback by changing the albedo in two ways: (1) decreasing incoming shortwave radiation due to cloud reflection and (2) by decreasing the shortwave reaching the surface after being reflected by clouds. In addition, increased (decreased) cloud amount and cloud liquid water are shown to be less (more) incoming shortwave fluxes at the surface, but not dominating factors to the Arctic surface radiation budget and its inter-model variation. Overall, the extended APRP method offers a useful tool for analyzing the complex interactions between clouds and radiative process, reasonably decomposes the individual SWCRE responses at the Arctic surface, and emphasizes that considering not only the cloud amount or its properties, but also surface albedo change is critical for the prediction of SWCRE on the Arctic surface.

Arctic cloud↗