Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Packaging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

FABRICATION AND DEPLOYMENT OF THE 9979 TYPE AF RADIOACTIVE WASTE PACKAGING FOR THE DEPARTMENT OF ENERGY

This paper summarizes the development, testing, and certification of the 9979 Type A Fissile Packaging that replaces the UN1A2 Specification Shipping Package eliminated from Department of Transportation (DOT) 49 CFR 173. The DOT Specification Package was used for many decades by the U.S. nuclear industry as a fissile waste container until its removal as an authorized container by DOT. This paper will discuss stream lining procurement of high volume radioactive material packaging manufacturing, such as the 9979, to minimize packaging production costs without sacrificing Quality Assurance. The authorized content envelope (combustible and non-combustible) as well as planned content envelope expansion will be discussed.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Ga2O3 Packaging and Thermal Management Challenges and Opportunities

This project addresses the early-stage research and development to design and build packages that enable practical utilization of Ga2O3 semiconductor devices in power electronic circuits. The project will encompass electrical, thermal, thermomechanical and reliability aspects in the package design. As compared to silicon (Si), SiC or GaN-based packaging, using a Ga2O3 device will require significant research and innovations in the attachment of the oxide device to substrates, attachment of the substrate to the baseplate/heat exchanger, appropriate electrical interconnections, as well as the type and location of the thermal management solutions. A thorough understanding and characterization of the thermal transport properties of the Ga2O3 device layer is also essential to understand and quantify the package performance. Addressing all these aspects will result in a high-performance, low-cost and reliable package.

30 DIRECT ENERGY CONVERSION↗

Modeling used fuel response to normal conditions of transportation package drops to access geometric sensitivities

The US Department of Energy Used Fuel Disposition program is performing research to determine the loading conditions that used nuclear fuel (UNF) experiences during normal conditions of transportation (NCT). This loading environment includes mechanical shock and vibration as the UNF is transported by rail or truck, and it also includes potential package free drop conditions, which are the topic of this study. NCT drop test requirements for UNF package designs are defined in 10 CFR 71.71. The free drop test height is 30 cm for the UNF packages considered in this study. Explicit dynamic finite element models of generic rail and truck UNF packages containing a highly resolved 17x17 PWR fuel assembly are used to estimate the potential range of loading experienced by UNF during NCT horizontal package drops onto an unyielding surface. There are many variables and uncertainties that can affect the loading of UNF during this type of free drop scenario. This study focuses on geometric variables, such as gap conditions and small adjustments to the angle of impact, in a number of analysis cases. The LS-DYNA finite element analyses calculate detailed results for all the components of the fuel assembly. The results show that the peak localized axial strain in the fuel cladding is estimated to be 0.006421 (nominal) with an upper bound of 0.014511, based on the peak instantaneous bending moment of 63.65 N-m and other uncertainty factors. For the assumed low burnup condition of the UNF, the cladding yield strain is 0.011027 and the failure strain is 0.015574, which means that the calculated upper bound strain approaches the cladding failure limit without exceeding it. The peak shear force on the cladding was calculated to be 7879 N. This could be significant to cladding integrity if applied to the UNF in a situation where the fuel pellets do not support the shear transfer. Further evaluation is needed to determine if this is a credible threat to cladding integrity for these 30 cm free drop scenarios.

42 ENGINEERING↗

Experience with the Quality Control of Radioactive Waste Packages for the German Repository Konrad - 16493

The German repository Konrad for radioactive waste with negligible heat generation is designed to accept 303,000 m{sup 3} of waste packages in total. Based on the Konrad licensing conditions, any treatment and conditioning of radioactive waste should be planned and carried out in accordance with the waste acceptance requirements of the repository Konrad in order to produce waste packages suitable for disposal. The qualification of the waste treatment processes and the resulting products are achieved by interaction of different parties involved. On behalf of the Federal Office for Radiation Protection - the competent German authority for disposal of radioactive waste - TUV NORD EnSys Hannover GmbH and Co. KG acts as one of the independent expert organizations for more than twenty years in the field of qualification of waste treatment campaigns and review of waste packages documentations. The permitted amount of nuclide activity in the radioactive waste packages depends on the characteristics of the radioactive waste products. Projecting a suitable strategy for loading the waste containers contributes to determine in advance, what requirements the radioactive waste products have to fulfill as well as what properties of the waste products need to be verified and documented during conditioning or treatment process. On the basis of various examples, it is being demonstrated how appropriate advance process planning can ensure that radioactive waste packages are generated to comply with the waste acceptance requirements. In consequence, technical measures due to requalification can be avoided even in case of unpredictable difficulties. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

CRISTAL V2: New package for criticality calculations

A new release of the CRISTAL French criticality calculation package, named CRISTAL V2, has been developed and intensively validated by IRSN and CEA, in collaboration with AREVA. This package was designed to cover the needs of criticality practitioners in the fields of nuclear fuel cycle facilities and transportation of fissile materials. Based on an optimized modular architecture in an updated software development environment, the design of CRISTAL package V2 integrates new generation of cross-section libraries, new calculation schemes consistent with new applications, and up-to-date calculation codes capabilities. Four calculation routes are currently available allowing multi-group and continuous energy calculations. The validation database is composed of more than 3000 critical experiments, in order to cover a wide range of configurations. The CRISTAL V2 package also includes customer services covering a large scope of activities like documentations, hotline, maintenance and training courses. A significant promotion and an increased recognition referred both nationally and internationally are foreseen, including the provision of the CRISTAL V2 package to the OECD / NEA Data Bank. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Designing Flexibility into the Authorized Radioactive Contents of the 9982 Shipping Package

The 9982 radioactive material shipping package, or the 9982, differs from the others by allowing a multitude of radionuclides instead of a single defined set. While allowing flexibility, this requires more justification on why these contents would be worthwhile and why they would not cause various safety hazards when shipped together. The latter was covered through mass limit calculations, and the potential uses for the package are shown through comparison with historical shipments. Here, the mass limits were already calculated[1] and used to show three example shipments are suitable for the 9982 as well. Plutonium stored in 3013 containers[2], training sources shipped in 9977 packages[3], and americium standards shipped in 9978 packages[4] were all analyzed. The mass of each radionuclide and the corresponding mass limit were used to first determine if the listed content could be shipped. If so, the maximum allowed mass of such contents is also calculated in order to see if the 200-gram fissile limit for the 9982 would be violated if additional material was packed. The sum-of-the-fractions method produces contents that do not violate the mass limits or exceed the 200-gram fissile limit. These sets also serve as realistic examples of what may be shipped in the 9982. Well-founded example contents will help the approval of the package by showing its compatibility with previously shipped material. Unfounded hypothetical contents would not show the usefulness of having a wide variety of allowed radionuclides. More contents may be developed in order to incorporate other radionuclides that were not present in these three examples. The light elements will also need to be evaluated due to their exclusion currently preventing some materials from being allowed in the 9982.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Spent Nuclear Fuel Package Consolidation using Metallic Void Fillers

This study introduces the idea of a consolidated spent nuclear fuel (SNF) package, formed by casting a metal into a SNF canister to fill any accessible void spaces. It is well known that castings experience shrinkage during cooling resulting in air gaps between the filler and its boundaries. For a consolidated SNF package, the air gap formed between the metallic filler and package components would have a negative impact on the thermal effusivity benefit offered by the filler. Here we present one solution to this challenge based on thermodynamic/solidification and metallic bonding principles. The key idea here is to pre-coat the package components with a low melting point metal, and to oxidize the coating instead of the components during the pre-heating step of the casting process. This allows for wetting of the boundary with the filler metal without the use of a flux that wouldn't survive the preheat temperature and could also contaminate the boundary with corrosive compounds. Potential benefits of successfully adopting this idea are twofold. First, improved heat diffusion inside the package due to the absence of the gap, which is significant for conceptual SNF with higher decay heat and high peak to average ratio. Second, improved proliferation resistance by making the fissile material recovery process more complex. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

UK Regulatory experience with the criticality safety of transport package applications - 14519

The UK Government has created the Office for Nuclear Regulation (ONR) as an independent public body to ensure effective and efficient regulation of the nuclear industry in the UK. ONR brings together for the first time in the UK the regulation of nuclear safety, civil nuclear security, nuclear safeguards and the transport of radioactive substances within a single organization. Applications requesting approval to transport packages containing fissile material through the UK have been received for many decades from numerous organisations across the world. Each application is treated equally with the judgement of safety based on the information provided in the design safety report. In recent years, the ONR has questioned a number of criticality safety related assumptions; some of which have been held for many decades. The outcome from these discussions will be examined. Uranium hexafluoride (UF{sub 6}) has been transported across the world for many years, carried in 30B steel cylinders within a variety of overpacks. For simplicity, some criticality safety cases have not claimed for the presence of the overpack. However, it shall be shown that these safety cases will have difficulty in justifying the criticality safety of transporting uranium hexafluoride if credit for the overpack is not claimed. In addition, the applications that have been submitted for Competent Authority approval have made various assumptions regarding the shell thickness of the 30B cylinder, the distribution of the hydrogen fluoride (HF) impurity and the potential for the uranium hexafluoride residues to hydrolyse. The adequacy of these assumptions will be discussed in turn along with the need for the applicant to demonstrate compliance with any certificate restriction on the mass of heel (residue) allowed within the package. Uranium oxide (UO{sub 2}) powder is regularly transported around the world. For most designs, it is assumed that water will enter the package under accident conditions of transport. Under these conditions, a common assumption is that the grains of uranium oxide powder will evenly distribute within the water and internal volume of the package. The validity of this assumption from a realistic and pessimistic perspective will be challenged. It will then be shown that if instead the powder grains of uranium oxide are agglomerated together into larger sized groups, an increase in the k{sub eff} of the system of up to 2,000 pcm can occur. As packages are commonly loaded up to the criticality safety limit, an increase in k{sub eff} such as this is likely to be problematic. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

CRISTAL V2.0: A New-generation criticality package - 14597

A new release of the CRISTAL French criticality calculation package, named CRISTAL V2.0, has been developed and intensively validated by IRSN and CEA, in collaboration with AREVA. This package was designed to cover the needs of criticality practitioners in the fields of nuclear fuel cycle facilities and transportation of fissile materials. Based on an optimized modular architecture in an updated software development environment, the design of CRISTAL package V2.0 integrates new generation of cross section libraries, new calculation schemes consistent with new applications, and up-to-date calculation codes capabilities. Four calculation routes are currently available allowing multi-group and continuous energy calculations. The validation database is composed of more than 3000 critical experiments, in order to cover a wide range of configurations. The CRISTAL V2.0 package also comprises customer services covering a range of areas of activity like documentation, hotline, maintenance and training courses. A wide promotion and an increased recognition referred both nationally and internationally are foreseen, including the provision of the CRISTAL V2.0 package to the OECD / NEA Data Bank. (authors)

42 ENGINEERING↗

COMPARISON OF RESPONSE OF 9977 TEST PACKAGES TO ANALYTICAL RESULTS

Each of the hypothetical accident test cases for the 9977 prototypes was included in the battery of finite element structural analyses performed for the package. Comparison of the experimental and analytical results provides a means of confirming that the analytical model correctly represents the physical behavior of the package. The ability of the analytical model to correctly predict the performance of the foam overpack material for the crush test is of particular interest. The dissipation of energy in the crushing process determines the deceleration of the package upon impact and the duration of the impact. In addition, if the analytical model correctly models the foam behavior, the predicted deformation of the package will match that measured on the test articles. This study compares the deformations of the test packages with the analytical predictions. In addition, the impact acceleration and impact duration for the test articles are compared with those predicted by the analyses.

42 ENGINEERING↗

Shipment of Small Quantities of Unspecified Radioactive Material in Chalfant Packagings

In the post 6M era, radioactive materials package users are faced with the disciplined operations associated with use of Certified Type B packaging. Many DOE, commercial and academic programs have a requirement to ship and/or store small masses of poorly characterized or unspecified radioactive material. For quantities which are small enough to be fissile exempt and have low radiation levels, the materials could be transported in a package which provides the required containment level. Because their Chalfant type containment vessels meet the highest standard of containment (helium leak-tight), the 9975, 9977, and 9978 are capable of transporting any of these contents. The issues associated with certification of a high-integrity, general purpose package for shipping small quantities of unspecified radioactive material are discussed and certification of the packages for this mission is recommended.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

FINITE ELEMENT ANALYSIS OF BULK TRITIUM SHIPPING PACKAGE

The Bulk Tritium Shipping Package was designed by Savannah River National Laboratory. This package will be used to transport tritium. As part of the requirements for certification, the package must be shown to meet the scenarios of the Hypothetical Accident Conditions (HAC) defined in Code of Federal Regulations Title 10 Part 71 (10CFR71). The conditions include a sequential 30-foot drop event, 30-foot dynamic crush event, and a 40-inch puncture event. Finite Element analyses were performed to support and expand upon prototype testing. Cases similar to the tests were evaluated. Additional temperatures and orientations were also examined to determine their impact on the results. The peak stress on the package was shown to be acceptable. In addition, the strain on the outer drum as well as the inner containment boundary was shown to be acceptable. In conjunction with the prototype tests, the package was shown to meet its confinement requirements.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

On Gas Ingression of Hermetic Packages

In this paper, a closed-form mathematic equation that governs gas ingression of hermetic packages is derived from first principles and applied to moist air and water vapor ingression conditions. The equation models internal gas partial pressure change as a function of time, external conditions, and package characteristics. The equation provides the theoretical basis for direct comparisons of ingression behaviors of different gases into hermetic packages. Comparing the rates of internal air pressure increase due to air ingression and water vapor partial pressure buildup due to water vapor ingression, the authors theorize that vacuum decay may present a greater challenge to the performance of microelectromechanical systems (MEMS) devices within hermetic packages than that of water vapor content induced corrosion failures. Furthermore, this paper also examines gas ingression of hermetic enclosures with multiple layers of seals.

42 ENGINEERING↗

Mathematics of Gas Ingress of Hermetic Packages

Herein, we have derived a gas ingress and egress equation from the first principles of ideal gases. This work is intended to benefit the hermetic microelectronics packaging community, but it may be applied to other fields that require a deep understanding of gas ingress and egress dynamics. The equation outlined herein encompasses package material properties, package characteristics, hermetic testing conditions, and service conditions. It serves as a practical utility for calculating package pressure changes due to gas ingress and egress and, therefore, a power tool for component and system service life predictions.

42 ENGINEERING↗

Foreword: Special Section on Multiphysics Aspects of Power Electronics Packaging—Power Die, Power Module, and Converter Level: Part 2

Power electronics are increasingly being used to condition electricity for a wide array of applications, such as transportation (on land, air, and water), data centers, radio frequency, directed energy, wind, solar, and grid-tied applications. Here, to increase power density, performance, efficiency, and reliability-as well as to reduce cost-innovations and developments are needed in the multiphysics packaging of power electronics at a die, module, and converter level. This includes fundamental R&D related to emerging high-voltage, high-temperature, and high-switching-frequency power electronics, packaging materials, thermal materials and interfaces, fluid-based thermal management technologies, reliability, condition monitoring, and prognostics. Latest developments in this area are published as a Special Section on Multiphysics Aspects of Power Electronics Packaging. The first part was published in the May 2024 issue of the IEEE Transactions on Components, Packaging and Manufacturing Technology (Volume 14, Issue 5). The second part of that Special Section is being published in this issue. A brief summary of the papers included in the second part are given below.

24 POWER TRANSMISSION AND DISTRIBUTION↗

9977 type b packaging internal data collection feasibility testing - magnetic field communications

The objective of this report is to document the findings from proof-of-concept testing performed by the Savannah River National Laboratory (SRNL) R&D Engineering and Visible Assets, Inc. for the DOE Packaging Certification Program (PCP) to determine if RuBee (IEEE 1902.1) tags and readers could be used to provide a communication link from within a drum-style DOE certified Type B radioactive materials packaging. A Model 9977 Type B Packaging was used to test the read/write capability and range performance of a RuBee tag and reader. Testing was performed with the RuBee tags placed in various locations inside the packaging including inside the drum on the outside of the lid of the containment vessel and also inside of the containment vessel. This report documents the test methods and results. A path forward will also be recommended.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Micro Crystalline Bamboo Cellulose Based Seaweed Biodegradable Composite Films for Sustainable Packaging Material

This study is aimed to fabricate and characterize the seaweed- biodegradable films incorporated with varying concentrations of microcrystalline cellulose (MCC) which was extracted from two bamboo sources: Schizostachyum brachycladum (BLMCC) and Gigantochloa scortechinii (BSMCC). Pure biodegradable seaweed film was directly fabricated from red seaweed (Kappaphycus alvarezii). In this demonstrated work, commercial MCC (CMCC), BLMCC and BSMCC were used to reinforce the pure seaweed bio-degradable film at different loading concentrations (0, 1, 3, 5, 7, 10 and 15%) based on the dried-weight of seaweed, for packaging applications. There was substantial improvement in the tensile strength and contact angle values while reduction in the water vapor permeability and elongation at break values with the incorporation of the CMCC, BLMCC and BSMCC into the seaweed pure film matrix, which is highly desirable for the packaging material in the current scenario. The morphology of the fabricated films confirmed that there was good dispersion of the 7% of CMCC, 5% of BLMCC and 3% of BSMCC in the pure seaweed films, which resulted in the enhanced mechanical properties. So far, this is the first report on the microcrystalline cellulose based seaweed films with excellent mechanical properties, which makes them suitable for packaging application. The demonstrated work proved that both BSMCC and BLMCC based seaweed composite films have the huge potential to be used as biodegradable packaging material for wide range of applications. Graphical Abstract: .

36 MATERIALS SCIENCE↗

Pressure-assisted thermal sterilization of avocado puree in high barrier polymeric packaging

The aim of this study was to examine the influence of pressure-assisted thermal sterilization (PATS) on properties of polymeric packaging and packaged avocado puree. High pressure of 600 MPa and initial vessel temperature of 90 °C were used over 5 min processing time. We used two high barrier film pouches: Film A-(PE/PA6//EVOH//PA6/PE) and film B-(AlO x -coated PET//AlO x -coated PET//PA//CPP). Oxygen transmission rates (OTR) changed from 0.16 ± 0.07 to 3.24 ± 0.52 cm 3 /m 2 .day for film A after processing while OTRs were not detected for film B. Water vapor transmission rates (WVTR) changed from 3.72 ± 0.06 to 4.97 ± 0.14 g/m 2 .day for film A and 0.11 ± 0.02 to 0.62 ± 0.0.6 g/m 2 .day for film B. The dissolved oxygen in packaged avocado puree reduced from 21% to 3% after PATS for both films. Reduced oxygen level in packaged avocado may help extend its shelf life. Dielectric properties and X-ray diffraction helped explain PATS induced changes in film barrier properties. The total chlorophyll, greenness, and lightness decreased significantly (p < 0.05) after PATS. The thiobarbituric acid activity reduced after PATS. PATS showed potential to produced shelf-stable avocado puree; however, shelf-life studies are needed to further develop PATS process.

42 ENGINEERING↗