Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA DIFFUSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Combined magnetic and kinetic control of advanced tokamak steady state scenarios based on semi-empirical modelling

Our paper shows that semi-empirical data-driven models based on a two-time-scale approximation for the magnetic and kinetic control of advanced tokamak (AT) scenarios can be advantageously identified from simulated rather than real data, and used for control design. The method is applied to the combined control of the safety factor profile, q(x), and normalized pressure parameter, beta(N), using DIII-D parameters and actuators (on-axis co-current neutral beam injection (NBI) power, off-axis co-current NBI power, electron cyclotron current drive power, and ohmic coil). The approximate plasma response model was identified from simulated open-loop data obtained using a rapidly converging plasma transport code, METIS, which includes an MHD equilibrium and current diffusion solver, and combines plasma transport nonlinearity with 0D scaling laws and 1.5D ordinary differential equations. The paper discusses the results of closed-loop METIS simulations, using the near-optimal ARTAEMIS control algorithm (MoreauDet al 2013 Nucl. Fusion 53 063020) for steady stateAT operation. With feedforward plus feedback control, the steady state target q-profile and beta(N) are satisfactorily tracked with a time scale of about 10 s, despite large disturbances applied to the feedforward powers and plasma parameters. We also show the robustness of the control algorithm with respect to disturbances of the H&CD actuators and of plasma parameters such as the H-factor, plasma density and effective charge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulation and flow physics of a shocked and reshocked high-energy-density mixing layer

This work describes a computational investigation of multimode instability growth and multimaterial mixing induced by multiple shock waves in a high-energy-density (HED) environment, where pressures exceed 1 Mbar. The simulations are based on a series of experiments performed at the National Ignition Facility (NIF) and designed as an HED analogue of non-HED shock-tube studies of the Richtmyer–Meshkov instability and turbulent mixing. A three-dimensional computational modelling framework is presented. It treats many complications absent from canonical non-HED shock-tube flows, including distinct ion and free-electron internal energies, non-ideal equations of state, radiation transport and plasma-state mass diffusivities, viscosities and thermal conductivities. The simulations are tuned to the available NIF data, and traditional statistical quantities of turbulence are analysed. Integrated measures of turbulent kinetic energy and enstrophy both increase by over an order of magnitude due to reshock. Large contributions to enstrophy production during reshock are seen from both the baroclinic source and enstrophy–dilatation terms, highlighting the significance of fluid compressibility in the HED regime. Dimensional analysis reveals that Reynolds numbers and diffusive Péclet numbers in the HED flow are similar to those in a canonical non-HED analogue, but conductive Péclet numbers are much smaller in the HED flow due to efficient thermal conduction by free electrons. It is shown that the mechanism of electron thermal conduction significantly softens local spanwise gradients of both temperature and density, which causes a minor but non-negligible decrease in enstrophy production and small-scale mixing relative to a flow without this mechanism.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Transport properties of disordered two‐dimensional complex plasma crystal

In this study, we numerically investigate the transport properties of a two‐dimensional ( 2D ) complex plasma crystal using diffusion of coplanar dust lattice waves. In the limit where the Hamiltonian interactions can be decoupled from the non‐Hamiltonian effects, we identify two distinct types of wave transport: Anderson‐type delocalization and long‐distance excitation. We use a recently developed spectral approach to evaluate the contribution of the Anderson problem and compare it to the results of the simulation. The benefit of our approach to transport problems is twofold. First, we employ a highly tuneable macroscopic hexagonal crystal, which exhibits many‐body interactions and allows for the investigation of transport properties at the kinetic level. Second, the analysis of the transport problem in 2D is provided using an innovative spectral approach, which avoids the use of scaling and boundary conditions. The comparison between the analytically predicted and numerically observed wave dynamics allows for the study of important characteristics of this open system. In our simulations, we observe long‐distance lattice excitation, which occurs around lattice defects even when the initial perturbation does not spread from the centre to the exterior of the crystal. In the decoupled Hamiltonian regime, this many‐body effect can be attributed to the dust lattice interaction with the plasma environment.

Kostadinova, E. G.↗

Formation of high-{beta} plasma and stable confinement of toroidal electron plasma in Ring Trap 1

Formation of high-{beta} electron cyclotron resonance heating plasma and stable confinement of pure electron plasma have been realized in the Ring Trap 1 device, a magnetospheric configuration generated by a levitated dipole field magnet. The effects of coil levitation resulted in drastic improvements of the confinement properties, and the maximum local {beta} value has exceeded 70%. Hot electrons are major component of electron populations, and its particle confinement time is 0.5 s. Plasma has a peaked density profile in strong field region [H. Saitoh et al., 23rd IAEA Fusion Energy Conference EXC/9-4Rb (2010)]. In pure electron plasma experiment, inward particle diffusion is realized, and electrons are stably trapped for more than 300 s. When the plasma is in turbulent state during beam injection, plasma flow has a shear, which activates the diocotron (Kelvin-Helmholtz) instability. The canonical angular momentum of the particle is not conserved in this phase, realizing the radial diffusion of charged particles across closed magnetic surfaces. [Z. Yoshida et al., Phys Rev. Lett. 104, 235004 (2010); H. Saitoh et al., Phys. Plasmas 17, 112111 (2010).].

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Increased photocatalytic activity of TiO 2 mesoporous microspheres from codoping with transition metals and nitrogen

The composition of anatase TiO 2 was modified by codoping using combinations of a transition metal and nitrogen in order to increase its photocatalytic activity and extend it performance in the visible region of the electromagnetic spectrum. The transition metals (Mn, Co, Ni, Cu) were added during the hydrothermal preparation of mesoporous TiO 2 particles, and the nitrogen was introduced by post-annealing in flowing ammonia gas at high temperature. The samples were analyzed by SEM, XRD, BET, inductively-coupled plasma spectroscopy, and diffuse reflectance UV-vis spectroscopy. The photocatalytic activity was assessed by observing the change in methylene blue concentrations under both UV-vis and visible-only light irradiation. As a result, the photocatalytic activity of the (Mn,N), (Co,N), (Cu,N), and Ni,N) codoped TiO 2 was significantly enhanced relative to (N) TiO 2 .

36 MATERIALS SCIENCE↗

Progress in development of SiC-based joints resistant to neutron irradiation

This study fills a knowledge gap regarding neutron-irradiation resistance of SiC joints for nuclear applications, by investigating high-dose neutron irradiation effects on the strength of selected joints and low-dose neutron irradiation effects on recently developed joints fabricated by state of the art processing methods. The joining methods used for the high-dose radiation study included pressure-assisted liquid-phase sintering (LPS) of SiC nanopowder, pressureless calcia-alumina glass ceramics joining, and reaction sintering of Ti-Si-C powders with hot-pressing. The joints were neutron-irradiated at 530 °C to 20 displacements per atom (dpa). Other joining methods included low-pressure LPS of cold-pressed SiC green body, pressureless reaction sintered Ti-Si-C powder joint, spark plasma–sintered Ti diffusion bond, and hot-pressed Ti diffusion bond, which were irradiated at ~500 °C to ~2 dpa. There was no notable degradation of torsional strengths of the joints following the high-dose irradiation. The irradiation-induced degradation at low neutron dose was highly dependent on joint type.

36 MATERIALS SCIENCE↗

Instabilities and turbulence in highly ionized plasmas in a magnetic field

Physical mechanisms were considered which are responsible for plasma turbulence and the establishment of necessary conditions for energy exchange and transfer in the frequency spectrum. In addition, work was performed to better understand the drift instability in the highly inhomogeneous Rensselaer arc, and methods to suppress this instability using feedback stabilization techniques. Correlation techniques were refined to study plasma turbulence, the diffusion wave technique for monitoring cross-field diffusion was extended to include regimes of high turbulence levels, and a technique for coupling stabilizing RF power to the Rensselaer arc was developed.

Jennings, W. C.↗

The Pioneer 11 radio occultation measurements of the Jovian ionosphere

Radio occultation data obtained with the Pioneer 11 spacecraft are utilized to study Jupiter's ionosphere. The ingress measurements, which were conducted by using a stable earth-based frequency reference for the tracking link, yielded ionospheric data near the morning terminator at about 79 deg south latitude. Data were also taken during egress on the evening side near 20 deg north latitude. The latter measurements were conducted in the one-way mode; i.e., an on-board crystal oscillator was employed as a frequency reference for the downlink (spacecraft-to-earth) signal. These data confirm previous results obtained with Pioneer 10 and show that Jupiter has a multilayered ionosphere extending over an altitude range of more than 3000 km. The topside scale height near 79 deg south latitude was 540 + or - 60 km. Assuming a topside electron, H(+) distribution controlled by diffusion yields a plasma temperature of 850 + or - 100 K in this region. The radio data indicate that the upper atmosphere is either warmer or more dissociated into atomic hydrogen than previously anticipated.

Fjeldbo, G.↗

Induced gyroresonant emission of extraordinary mode radiation

Induced amplification of extraordinary-mode electromagnetic waves in a magnetized plasma is investigated. The analysis is performed for a plasma which consists of two components: a relatively dense species of thermal plasma and a diffuse population of suprathermal electrons characterized by a loss cone-type distribution. The excitation mechanism is primarily due to the interaction of the electromagnetic waves with the energetic electrons via the relativistic cyclotron resonance which arises because of the momentum dependence of the gyrofrequency. The present study is particularly concerned with waves propagating perpendicularly and nearly perpendicularly with respect to the external magnetic field, since it is expected that for these cases the cyclotron damping due to thermal electrons is vanishingly small and the growth rates are maximum. The results indicate that excitation occurs primarily for frequencies near the first two gyroharmonics.

Freund, H. P.↗

Automated Array Assembly, Phase 2

The solar cell module process development activities in the areas of surface preparation are presented. The process step development was carried out on texture etching including the evolution of a conceptual process model for the texturing process; plasma etching; and diffusion studies that focused on doped polymer diffusion sources. Cell processing was carried out to test process steps and a simplified diode solar cell process was developed. Cell processing was also run to fabricate square cells to populate sample minimodules. Module fabrication featured the demonstration of a porcelainized steel glass structure that should exceed the 20 year life goal of the low cost silicon array program. High efficiency cell development was carried out in the development of the tandem junction cell and a modification of the TJC called the front surface field cell. Cell efficiencies in excess of 16 percent at AM1 have been attained with only modest fill factors. The transistor-like model was proposed that fits the cell performance and provides a guideline for future improvements in cell performance.

Carbajal, B. G.↗

Acoustic waves in supernova remnants

When the Mach number of a supernova shock wave, propagating through the hot interstellar gas, is less than the critical value 2.76, the interaction of the shock with an interstellar cloud produces a reflected pressure pulse that propagates away from the cloud as an acoustic wave. A preliminary analysis indicates that about 4% of the energy of an exploding supernova shell is converted into such waves. When the postshock gas temperature exceeds 2 x 10 to the 6th K, waves as short as 6 pc are damped in less than a wavelength, returning the energy to the hot gas. Longer waves, especially at late stages, are less strongly damped, and are superposed in the hot gas to create a fluctuating magnetoacoustic field, with typical periods of about 100,000 years. In the warm neutral clouds at temperatures of about 8000 K these waves are rapidly damped by plasma slip (ambipolar diffusion), providing a heat source that may account for the temperatures of these clouds.

Spitzer, L., Jr.↗

The low-energy plasma in the Jovian magnetosphere

Burke and Franklin (1955) discovered radio emissions from Jupiter at 22.2 MHz. Subsequent observations established the strong control of the decametric emissions by the satellite Io. The Voyager encounters with Jupiter in 1979 have resulted in a dramatic increase in detailed knowledge of the plasma properties of the Jovian magnetosphere. The Io plasma torus is discussed, taking into account the Voyager plasma science experiment, positive-ion temperatures in the torus, electron distribution functions in the torus, elementary-charge concentrations in the torus, positive-ion composition in the torus, and plasma velocities in the torus. The Io flux tube is considered along with the middle magnetosphere and the outer magnetosphere. Attention is given to the sources of plasma, aspects of diffusive transport, questions of inertial loading, and the existence of nonazimuthal flow velocities in the middle magnetosphere.

Belcher, J. W.↗

On the structure of solar and stellar coronae - Loops and loop heat transport

We discuss the principal constraints on mechanisms for structuring and heating the outer atmospheres - the coronae - of stars. We argue that the essential cause of highly localized heating in the coronae of stars like the sun is the spatially intermittent nature of stellar surface magnetic fields, and that the spatial scale of the resulting coronal structures is related to the spatial structure of the photospheric fields. We show that significant constraints on coronal heating mechanisms derive from the observed variations in coronal emission, and, in addition, show that the observed structuring perpendicular to coronal magnetic fields imposes severe constraints on mechanisms for heat dispersal in the low-beta atmosphere. In particular, we find that most of commonly considered mechanisms for heat dispersal, such as anomalous diffusion due to plasma turbulence or magnetic field line stochasticity, are much too slow to account for the observed rapid heating of coronal loops. The most plausible mechanism appears to be reconnection at the interface between two adjacent coronal flux bundles. Based on a model invoking hyperresistivity, we show that such a mechanism naturally leads to dominance of isolated single bright coronal loops and to bright coronal plasma structures whose spatial scale transverse to the local magnetic field is comparable to observed dimensions of coronal X-ray loops.

Litwin, Christof↗

Progress in ODS Alloys: A Synopsis of a 2010 Workshop on Fe- Based ODS Alloys

In Fall 2010, a workshop on the role and future of Fe-based Oxide Dispersion Strengthened (ODS) alloys gathered together ODS alloy suppliers, potential industrial end-users, and technical experts in relevant areas. Presentations and discussions focused on the current state of development of these alloys, their availability from commercial suppliers, past major evaluations of ODS alloy components in fossil and nuclear energy applications, and the technical and economic issues attendant to commercial use of ODS alloys. Significant progress has been achieved in joining ODS alloys, with creep resistant joints successfully made by inertia welding, friction stir welding and plasma-assisted pulse diffusion bonding, and in improving models for the prediction of lifetime components. New powder and alloy fabrication methods to lower cost or improve endproduct properties were also described. The final open discussion centered on challenges and pathways for further development and large-scale use of ODS alloys.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Interpretation of particle pinches and diffusion coefficients in the edge pedestal of DIII-D H-mode plasmas

A procedure is described for evaluating particle pinches to be used in interpreting particle diffusion coefficients from measured density and temperature profiles in the edge pedestal of tokamak plasmas. Application to the interpretation of two DIII-D [J. Luxon, Nucl. Fusion 42, 614 (2002)]. discharges yields new information about particle pinches and particle diffusion coefficient profiles in the edge pedestal.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A simple, analytical model of collisionless magnetic reconnection in a pair plasma

A set of conservation equations is utilized to derive balance equations in the reconnection diffusion region of a symmetric pair plasma. The reconnection electric field is assumed to have the function to maintain the current density in the diffusion region and to impart thermal energy to the plasma by means of quasiviscous dissipation. Using these assumptions it is possible to derive a simple set of equations for diffusion region parameters in dependence on inflow conditions and on plasma compressibility. These equations are solved by means of a simple, iterative procedure. The solutions show expected features such as dominance of enthalpy flux in the reconnection outflow, as well as combination of adiabatic and quasiviscous heating. Furthermore, the model predicts a maximum reconnection electric field of E{sup *}=0.4, normalized to the parameters at the inflow edge of the diffusion region.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗