Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PIN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Using irradiation-induced defects as pinning sites to minimize self-alignment in twisted bilayer graphene

Preparing bi-layer graphene under a magic twisting angle of ~1.1° has been challenging due to its strong tendency for self-alignment. We propose a method to pin graphene layers and minimize their self-rotation when positioned close to each other. The feasibility is demonstrated by the present study using molecular dynamics simulations. C 60 clusters are used to bombard two individual graphene layers, creating damage on both layers. When two irradiated layers are moving closer to each other, defects from irradiation damaged zones can interact with each other, hence acting as pinning sites to immobilize graphene and minimize rotation or gliding. Dangling bonds from defective regions of each plane induce the formation of sp bonds. Upon sliding, the bond is strong enough to induce the formation of one-dimensional carbon single chain, acting as a thread to constrain the relative movements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electromagnetic pinned solitons for space debris detection

Electromagnetic “pinned” solitons in the form of stationary nonlinear waves are studied within the framework of an inertial magneto-hydrodynamic model. These structures, that can arise when a charged source moves in a magnetized plasma, have a velocity that is equal to the source velocity and, hence, appear as “pinned” structures that envelope the source. We investigate the excitation of such solitons in the Low Earth Orbit region due to the passage of charged orbital debris objects. The spatial size of these electromagnetic solitons, typically of the order of a few ion skin depths, can be very large in this region. Such solitons can be detected using a variety of ground- or orbit-based radio sounding techniques and may provide a convenient additional means of tracking small sized orbital debris objects that are difficult to spot optically.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High-Fidelity CFD Assessments of Flow Resistance in a 61-Pin Wire-Wrapped Assembly with Partially Blocked Channels

The examination of thermal-hydraulic behaviors in wire-wrapped rod bundles continues to be an active area of research. The sodium fast reactor, a prominent candidate in next-generation nuclear designs, utilizes a hexagonal configuration of wire-wrapped fuel pins. Here, the potential for channel blockage within this compact arrangement poses a significant safety challenge, spurring a number of recent experimental and computational investigations to evaluate its impact on flow and heat transfer. The present work aims to benchmark the high-fidelity NekRS computational fluid dynamics (CFD) solver in predicting the pressure drops associated with substantial blockages, using available experimental data as a reference. A 61-pin wire-wrapped fuel assembly with two flow blockage configurations has been simulated and investigated at a range of low to moderate Reynolds numbers (487 ≤ Re ≤ 14 600). The NekRS solver demonstrates an exponential reduction of spatial discretization error with increasing polynomial order. The high level of agreement between the numerical results and measured data confirms the accuracy and consistency of the present numerical approach. This benchmark study establishes the capability of NekRS to perform reliable hydrodynamic simulations for sodium fast reactor applications and supports its use in design, licensing, and safety analyses.

CFD Benchmarking↗

Enhanced flux pinning in MOCVD-YBCO films through Zr additions : systematic feasibility studies.

Systematic effects of Zr additions on the structural and flux pinning properties of YBa{sub 2}Cu{sub 3}O{sub 7-{delta}} (YBCO) films deposited by metal-organic chemical vapor deposition (MOCVD) have been investigated. Detailed characterization, conducted by coordinated transport, x-ray diffraction, scanning and transmission electron microscopy analyses, and imaging Raman microscopy have revealed trends in the resulting property/performance correlations of these films with respect to varying mole percentages (mol%) of added Zr. For compositions {le} 7.5 mol%, Zr additions lead to improved in-field critical current density, as well as extra correlated pinning along the c-axis direction of the YBCO films via the formation of columnar, self-assembled stacks of BaZrO{sub 3} nanodots.

36 MATERIALS SCIENCE↗

Multifunctional, Phase-Separated, BaTiO 3 + CoFe 2 O 4 Cap Buffer Layers for Improved Flux-Pinning in YBa 2 Cu 3 O 7- Based Coated Conductors

Phase separated, epitaxial, nanostructured film comprised of BaTiO{sub 3} (BTO) and CoFe{sub 2}O{sub 4} (CFO) composite has been developed as a potential multifunctional cap buffer layer for improved flux-pinning in YBa{sub 2}Cu{sub 3}O{sub 7-{delta}} (YBCO) films. All films were deposited by pulsed laser deposition on SrTiO{sub 3} (STO) (100) single crystal substrates. The CFO fraction and growth temperature were identified as key factors for determining the areal number density and mean diameter of the CFO nanocolumns. Compared to the reference sample grown on a pure BTO cap layer, the YBCO films grown on BTO+CFO cap layers show a remarkable improvement in isotropic flux-pinning and, consequently, J{sub c} over the entire field and angle ranges. Transmission electron microscopy analysis confirmed the presence of a very defective YBCO layer containing a high density of randomly distributed defects at the interface area, induced by nanostructural modulation on the surface of the BTO+CFO composite cap layer.

36 MATERIALS SCIENCE↗

Flux pinning characteristics in cylindrical ingot niobium used in superconducting radio frequency cavity fabrication

We present the results of from DC magnetization and penetration depth measurements of cylindrical bulk large-grain (LG) and fine-grain (FG) niobium samples used for the fabrication of superconducting radio frequency (SRF) cavities. The surface treatment consisted of electropolishing and low temperature baking as they are typically applied to SRF cavities. The magnetization data were fitted using a modified critical state model. The critical current density Jc and pinning force Fp are calculated from the magnetization data and their temperature dependence and field dependence are presented. The LG samples have lower critical current density and pinning force density compared to FG samples which implies a lower flux trapping efficiency. This effect may explain the lower values of residual resistance often observed in LG cavities than FG cavities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Plasma breakdown in bubbles passing between two pin electrodes

The ignition of plasmas in liquids has applications from medical instrumentation to manipulation of liquid chemistry. Formation of plasmas directly in a liquid often requires prohibitively large voltages to initiate breakdown. Producing plasma streamers in bubbles submerged in a liquid with higher permittivity can significantly lower the voltage needed to initiate a discharge by reducing the electric field required to produce breakdown. The proximity of the bubble to the electrodes and the shape of the bubbles play critical roles in the manner in which the plasma is produced in, and propagates through, the bubble. In this paper, we discuss results from a three-dimensional direct numerical simulation (DNS) used to investigate the shapes of bubbles formed by injection of air into water. Comparisons are made to results from a companion experiment. A two-dimensional plasma hydrodynamics model was then used to capture the plasma streamer propagation in the bubble using a static bubble geometry generated by the DNS The simulations showed two different modes for streamer formation depending on the bubble shape. In an elliptical bubble, a short electron avalanche triggered a surface ionization wave (SIWs) resulting in plasma propagating along the surface of the bubble. In a circular bubble, an electron avalanche first traveled through the middle of the bubble before two SIWs began to propagate from the point closest to the grounded electrode where a volumetric streamer intersected the surface. In an elliptical bubble approaching a powered electrode in a pin-to-pin configuration, we experimentally observed streamer behavior that qualitatively corresponds with computational results. Optical emission captured over the lifetime of the streamer curve along the path of deformed bubbles, suggesting propagation of the streamer along the liquid/gas boundary interface. Plasma generation supported by the local field enhancement of the deformed bubble surface boundaries is a mechanism that is likely responsible for initiating streamer formation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Heterogeneous nucleation of pits via step pinning during Si(100) homoepitaxy

Using scanning tunneling microscopy (STM), we investigate oxide-induced growth pits in Si thin films deposited by molecular beam epitaxy. In the transition temperature range from 2D adatom islanding to step-flow growth, systematic controlled air leaks into the growth chamber induce pits in the growth surface. We show that pits are also correlated with oxygen-contaminated flux from Si sublimation sources. From a thermodynamic standpoint, multilayer growth pits are unexpected in relaxed homoepitaxial growth, whereas oxidation is a known cause for step-pinning, roughening, and faceting on elemental surfaces, both with and without growth flux. Not surprisingly, pits are thermodynamically metastable and heal by annealing to recover a smooth periodic step arrangement. STM reveals new details about the pits' atomistic origins and growth dynamics. Here, we give a model for heterogeneous nucleation of pits by preferential adsorption of Å-sized oxide nuclei at intrinsic growth antiphase boundaries, and subsequent step pinning and bunching around the nuclei.

36 MATERIALS SCIENCE↗

Driven superconducting vortex dynamics in systems with twofold anisotropy in the presence of pinning

Abstract We examine the dynamics of superconducting vortices with twofold anisotropic interaction potentials driven over random pinning, and compare the behavior under drives applied along the hard and the soft anisotropy directions. As the driving force increases, the number of topological defects reaches a maximum near the depinning threshold, and then decreases as the vortices form one-dimensional (1D) chains. This coincides with a transition from a pinned nematic to a moving smectic aligned with the soft anisotropy direction. The system is generally more ordered when the drive is applied along the soft direction of the anisotropy. For driving along the hard direction, there is a critical value of the twofold anisotropy above which the system remains aligned with the soft direction. Hysteretic behavior appears upon cycling the driving force, with 1D vortex chains persisting during the decreasing leg below the threshold for chain formation for increasing drive. More anisotropic systems have a greater amount of structural disorder in the moving state. For lower anisotropy, the system forms a moving smectic-A state, while at higher anisotropy, a moving nematic state appears instead.

36 MATERIALS SCIENCE↗

Field of first magnetic flux entry and pinning strength of superconductors for rf application measured with muon spin rotation

Here, the performance of superconducting radiofrequency (SRF) cavities used for particle accelerators depends on two characteristic material parameters: field of first flux entry H entry and pinning strength. The former sets the limit for the maximum achievable accelerating gradient, while the latter determines how efficiently flux can be expelled related to the maximum achievable quality factor. In this paper, a method based on muon spin rotation (μSR) is developed to probe these parameters on samples. It combines measurements from two different spectrometers, one being specifically built for these studies and samples of different geometries. It is found that annealing at 1400°C virtually eliminates all pinning. Such an annealed substrate is ideally suited to measure H entry of layered superconductors, which might enable accelerating gradients beyond bulk niobium technology.

43 PARTICLE ACCELERATORS↗

Effect of Ni doping on vortex pinning in CaK ( F e 1 - x N i x ) 4 A s 4 single crystals

We study the correlation between chemical composition and vortex dynamics in Ni-doped CaK(Fe 1–x Ni x ) 4 As 4 (x = 0, 0.015, 0.025, 0.03, and 0.05) single crystals by performing measurements of the critical current densities J c and the flux creep rates S . The magnetic relaxation of all the crystals is well described by the collective creep theory. The samples display a glassy exponent μ within the predictions for vortex bundles in a weak pinning scenario and relatively small characteristic pinning energy ( U 0 < 100K). The undoped crystals display modest J c values at low temperatures and high magnetic fields applied along the c axis. J c ( T ) dependences at high fields display an unusual peak. The enhancement in J c ( T ) matches with an increase in U 0 and the appearance of a second peak in the magnetization. As Ni doping increases, whereas there is a monotonic decrease in T c there is a nonmonotonic change in J c . Initially J c increases, reaching a maximum value for x = 0.015, and then J c decreases for x ≥ 0.025. This change in J c ( x ) is coincident with the onset of antiferromagnetic order. The magnetic field dependence of J c ( H ) also manifests a change in behavior between these x values. The analysis of the vortex dynamics for small and intermediate magnetic fields shows a gradual evolution in the glassy exponent μ with Ni content, x . As a result, this implies that there is no appreciable change in the mechanism that determines the vortex relaxation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Chiral edge currents for ac-driven skyrmions in confined pinning geometries

In this work, we show that ac-driven skyrmion lattices in a weak pinning channel confined by regions of strong pinning exhibit edge transport carried by skipping orbits while skyrmions in the bulk of the channel undergo localized orbits with no net transport. The magnitude of the edge currents can be controlled by varying the amplitude and frequency of the ac drive or by changing the ratio of the Magnus force to the damping term. We identify a localized phase in which the orbits are small and edge transport is absent, an edge transport regime, and a fluctuating regime that appears when the ac drive is strong enough to dynamically disorder the skyrmion lattice. We also find that in some cases, multiple rows of skyrmions participate in the transport due to a drag effect from the skyrmion-skyrmion interactions. The edge currents are robust for finite disorder and should be a general feature of skyrmions interacting with confined geometries or inhomogeneous disorder under an ac drive. We show that similar effects can occur for skyrmion lattices at interfaces or along domain boundaries for multiple coexisting skyrmion species. The edge current effect provides a new method to control skyrmion motion, and we discuss the connection of these results with recent studies on the emergence of edge currents in chiral active matter systems and gyroscopic metamaterials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Critical fields and vortex pinning in overdoped Ba 0.2 K 0.8 Fe 2 As 2

We determine the upper and lower critical fields, the penetration depth and the vortex pinning characteristics of single crystals of overdoped Ba 0.2 K 0.8 Fe 2 As 2 with T c ~ 10 K. We find that bulk vortex pinning is weak and vortex dynamics to be dominated by the geometrical surface barrier. The temperature dependence of the lower critical field, H c1 , displays a distinctive upturn at low temperatures, which is suggestive of two distinct superconducting gaps. Furthermore, the penetration depth, λ, varies linearly with temperature below 4 K indicative of line nodes in the superconducting gap. As a result, these observations can be well described in a model based on a multi-band nodal superconducting gap.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Single-vortex pinning and penetration depth in superconducting NdFeAsO 1-x F x

We use a magnetic force microscope (MFM) to investigate single vortex pinning and penetration depth in NdFeAsO 1-x F x , one of the highest-T c iron-based superconductors. In fields up to 20 Gauss, we observe a disordered vortex arrangement, implying that the pinning forces are stronger than the vortex-vortex interactions. We measure the typical force to depin a single vortex, F depin ≃ 4.5 pN, corresponding to a critical current up to J c ≃ 7×10 5 A/cm 2 . As a result, our MFM measurements allow the first local and absolute determination of the superconducting in-plane penetration depth in NdFeAsO 1-x F x , λ ab = 320 ± 60 nm, which is larger than previous bulk measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optimization of vortex pinning by nanoparticles using simulations of the time-dependent Ginzburg-Landau model

Introducing nanoparticles into superconducting materials has emerged as an efficient route to enhance their current-carrying capability. We address the problem of optimizing vortex pinning landscape for randomly distributed metallic spherical inclusions using large-scale numerical simulations of time- dependent Ginzburg-Landau equations. We found the size and density of particles for which the highest critical current is realized in a fixed magnetic field. For each particle size and magnetic field, the critical current reaches a maximum value at a certain particle density, which typically corresponds to 15{23% of the total volume being replaced by nonsuperconducting material. For fixed diameter, this optimal particle density increases with the magnetic field. Furthermore, we found that the optimal particle diameter slowly decreases with the magnetic field from 4.5 to 2.5 coherence lengths at a given temperature. This result shows that pinning landscapes have to be designed for specific applications taking into account relevant magnetic field scales.

36 MATERIALS SCIENCE↗

Metastability and hysteretic vortex pinning near the order-disorder transition in NbSe 2 : Interplay between plastic and elastic energy barriers

We studied thermal and dynamic history effects in the vortex lattice (VL) near the order-disorder transition in clean NbSe 2 single crystals. Comparing the evolution of the effective vortex pinning and the bulk VL structure, we observed metastable superheated and supercooled VL configurations that coexist with a hysteretic effective pinning response due to thermal cycling of the system. A novel scenario, governed by the interplay between (lower) elastic and (higher) plastic energy barriers, is proposed as an explanation for our observations: Plastic barriers, which prevent the annihilation or creation of topological defects, require dynamic assistance to be overcome and to achieve a stable VL at each temperature. Conversely, thermal hysteresis in the pining response is ascribed to low energy barriers, which inhibit rearrangement within a single VL correlation volume and are easily overcome as the relative strength of competing interactions changes with temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pinning, rotation, and metastability of BiFeO 3 cycloidal domains in a magnetic field

Earlier models for the room-temperature multiferroic BiFeO 3 implicitly assumed that a very strong anisotropy restricts the domain wave vectors q to the threefold-symmetric axis normal to the static polarization P. However, recent measurements demonstrate that the domain wave vectors q rotate within the hexagonal plane normal to P away from the magnetic field orientation m. In this paper, we show that the previously neglected threefold anisotropy K 3 restricts the wave vectors to lie along the threefold axis in zero field. Taking m to lie along a threefold axis, the domain with q parallel to m remains metastable below B c1 ≈7 T. Due to the pinning of domains by nonmagnetic impurities, the wave vectors of the other two domains start to rotate away from m above 5.6 T, when the component of the torque τ=M×B along P exceeds a threshold value τ pin . Since τ=0 when m⊥q, the wave vectors of those domains never become completely perpendicular to the magnetic field. Our results explain recent measurements of the critical field as a function of field orientation, small-angle neutron scattering measurements of the wave vectors, as well as spectroscopic measurements with m along a threefold axis. Finally, the model developed in this paper also explains how the three multiferroic domains of BiFeO 3 for a fixed P can be manipulated by a magnetic field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Extraction of P{sub 11} resonances from {pi}N data.

We show that two P11 nucleon resonance poles near the {pi}{Delta} threshold, obtained in several analyses, are stable against large variations of parameters within a dynamical coupled-channels analysis based on meson-exchange mechanisms. By also performing an analysis based on a model with a bare nucleon state, we find that this two-pole structure is insensitive to the analytic structure of the amplitude in the region below the {pi}N threshold. Our results are Mpole=(1363-6+9-i79-5+3) and (1373-10+12-i114-9+14) MeV. We also demonstrate that the number of poles in the 1.5-GeV W 2-GeV region could be more than one, depending on how the structure of the single-energy solution of SAID is fitted. For three-pole solutions, our best estimated result of a pole near N(1710) listed by Particle Data Group is (1829-65+131-i192-110+88) MeV, which is close to the results of several previous analyses. Our results indicate the need for more accurate {pi}N reaction data in the W> 1.6-GeV region for high-precision resonance extractions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗