Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHASES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Pd₂Cd 11–δ (0.21≤δ≤0.51)–a partly disordered γ-brass type phase and Pd₀.₂₃₈Cd₀.₇₆₂ -a γ-brass related incommensurate phase in the palladium–cadmium system

The Cd rich part of the Cd–Pd phase diagram was reassessed by means of synthesis and single crystal and powder X-ray diffraction. The region contains two phases that have been reported to have substantial compositional widths, Cd₁₁Pd₂ and Cd₄Pd. The phase Cd₁₁Pd₂ that has previously been reported to be a disordered γ-brass crystallizing is space group P4-bar 3m is here shown to crystallize in I4-bar 3m and the mechanism for compositional variation is explained. The phase Pd₄Cd has previously been shown to constitute a phase field or a phase bundle of modulated structures and here we determine the structure of a compound Pd₀.₂₃₈Cd₀.₇₆₂ which crystallizes in the orthorhombic superspace group mm(α00)0s0 (F=[(½, ½, 0, 0); (½, 0, ½, 0 ); (0, ½, ½, 0 )] with the fundamental cell dimensions a=4.687(2) Å, b=10.000(1) Å, c=14.140(2) Å, q=0.6432(6)a⁎. - Graphical abstract: The crystal structures of the partly disordered γ-brass type Pd₂Cd 11–δ (0.21≤δ≤0.51) and γ-brass related Pd₀.₂₃₈Cd₀.₇₆₂ in the palladium–cadmium binary system. Highlights: • Partly disordered γ-brass type Pd₂Cd 11–δ (0.21≤δ≤0.51) and γ-brass related Pd₀.₂₃₈Cd₀.₇₆₂ have been synthesized. • The Pd₂Cd 11–δ structure have been described by cluster concept. • Incommensurately modulated Pd₀.₂₃₈Cd₀.₇₆₂ have been described by (3+1) D space description. • The structure of Pd₀.₂₃₈Cd₀.₇₆₂ has two different chains of atomic subunits, each with their own translational periodicities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pressure-induced structural phase transition in AlN:Mg and AlN:Co nanowires

High-pressure behaviors of AlN:Mg and AlN:Co nanowires have been investigated by in situ angle dispersive synchrotron X-ray diffraction up to 41.5 GPa and 38.2 GPa, respectively. Their corresponding pressure-induced wurtzite-to-rocksalt phase transitions start at 17.7 GPa and 15.0 GPa and complete at 33.2 GPa and 31.0 GPa, respectively. The phase-transition routes are not affected by the doped ions, while the phase transition pressures are lower than that of pure AlN nanowires. The distinct high-pressure behaviors are ascribed to the doped ions, which reduce the formation energy of cation vacancies and induce Al vacancies defects together with substitution defects, resulting in lattice distortion and affecting structural stability and phase transition pressure. - Graphical abstract: The high-pressure behaviors of AlN:Mg and AlN:Co nanowires have been investigated by in situ angle dispersive synchrotron X-ray diffraction. - Highlights: • The high-pressure behaviors of AlN:Mg and AlN:Co nanowires have been investigated. • The pressure-induced wurtzite-to-rocksalt phase transitions have been observed. • The phase transition pressures are lower than that of pure AlN nanowires. • The distinct high-pressure behaviors are ascribed to the dopants. • The vacancy defects and substitution defects influence structural stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

New insights into the application of the valence rules in Zintl phases—Crystal and electronic structures of Ba{sub 7}Ga{sub 4}P{sub 9}, Ba{sub 7}Ga{sub 4}As{sub 9}, Ba{sub 7}Al{sub 4}Sb{sub 9}, Ba{sub 6}CaAl{sub 4}Sb{sub 9}, and Ba{sub 6}CaGa{sub 4}Sb{sub 9}

Crystals of three new ternary pnictides—Ba{sub 7}Al{sub 4}Sb{sub 9}, Ba{sub 7}Ga{sub 4}P{sub 9}, and Ba{sub 7}Ga{sub 4}As{sub 9} have been prepared by reactions of the respective elements in molten Al or Pb fluxes. Single-crystal X-ray diffraction studies reveal that the three phases are isotypic, crystallizing in the orthorhombic Ba{sub 7}Ga{sub 4}Sb{sub 9}-type structure (space group Pmmn, Pearson symbol oP40, Z=2), for which only the prototype is known. The structure is based on TrPn{sub 4} tetrahedra (Tr=Al, Ga; Pn=P, As, Sb), connected in an intricate scheme into 1D-ribbons. Long interchain Pn–Pn bonds (d{sub P–P}>3.0 Å; d{sub As–As}>3.1 Å; d{sub Sb–Sb}>3.3 Å) account for the realization of 2D-layers, separated by Ba{sup 2+} cations. Applying the classic valance rules to rationalize the bonding apparently fails, and Ba{sub 7}Ga{sub 4}Sb{sub 9} has long been known as a metallic Zintl phase. Earlier theoretical calculations, both empirical and ab-initio, suggest that the possible metallic properties originate from filled anti-bonding Pn–Pn states, and the special roles of the “cations” in this crystal structure. To experimentally probe this hypothesis, we sought to synthesize the ordered quaternary phases Ba{sub 6}CaTr{sub 4}Sb{sub 9} (Tr=Al, Ga). Single-crystal X-ray diffraction work confirms Ba{sub 6.145(3)}Ca{sub 0.855}Al{sub 4}Sb{sub 9} and Ba{sub 6.235(3)}Ca{sub 0.765}Ga{sub 4}Sb{sub 9}, with Ca atoms preferably substituting Ba on one of the three available sites. The nuances of the five crystal structures are discussed, and the chemical bonding in Ba{sub 7}Ga{sub 4}As{sub 9} is interrogated by tight-binding linear muffin-tin orbital calculations. - Graphical abstract: The new Zintl phases—Ba{sub 7}Al{sub 4}Sb{sub 9}, Ba{sub 7}Ga{sub 4}P{sub 9}, and Ba{sub 7}Ga{sub 4}As{sub 9}, and their quaternary variants Ba{sub 6}CaTr{sub 4}Sb{sub 9} (Tr=Al, Ga)—crystallize in the Ba{sub 7}Ga{sub 4}Sb{sub 9} structure type. The structures are based on TrPn{sub 4} tetrahedra (a perspective of the crystal structure is shown, as viewed along the c axis). - Highlights: • Ba{sub 7}Al{sub 4}Sb{sub 9}, Ba{sub 7}Ga{sub 4}P{sub 9}, and Ba{sub 7}Ga{sub 4}As{sub 9} are new compounds in the respective phase diagrams. • The quaternary phases Ba{sub 6}CaTr{sub 4}Sb{sub 9} (Tr=Al, Ga) show nearly ordered Ba/Ca distribution. • Very weak Pn–Pn bonds and pairing distortion are observed for Ba{sub 7}Ga{sub 4}Pn{sub 9} (Pn=P, As).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase transformations, microstructural refinement and defect evolution mechanisms in Al-Si alloys under non-hydrostatic diamond anvil cell compression

Non-hydrostatic compression of materials using a diamond anvil cell (DAC) can transform equilibrium microstructure of an alloy to novel, potentially metastable states. In this study, in situ synchrotron X-ray diffraction (XRD) during compression up to 24 GPa and subsequent ex situ, high resolution analytical electron microscopy (AEM) after decompression of an Al-Si alloy provided insight into the crystallographic changes during the compression as well as microstructural refinement, and defect structures caused by such a high pressure compression-decompression process. Pressure resolved in-situ synchrotron XRD was used to detail the phase transformation pathway of the eutectic Si phase in Al-Si alloy, from Si-I → Si-XI → Si-V during compression, and a final transformation predominantly to Si-III after decompression. Using scanning and transmission electron microscopy (S/TEM), site specific analysis of the alloy immediately underneath the anvil contact surface demonstrated a highly complex microstructure. A narrow region of thick amorphous Al oxide interspersed with nanocrystalline grains was found at the top surface. Underneath this Al oxide, while the majority the eutectic Si was transformed into highly-deformed, polycrystalline (PC) Si-III, a complex intermediate layer was discovered at the interface between Al and Si, comprised of a small fraction of Al nanocrystals and a majority of nanocrystalline Si-I. This combination of pressure resolved in-situ synchrotron XRD coupled with subsequent high resolution, electron microscopy resolved the phase transformation as well as non-equilibrium microstructures in a metallic alloy induced by a non-hydrostatic high pressure compression followed by decompression.

36 MATERIALS SCIENCE↗

Particle Size Distribution Dynamics Can Help Constrain the Phase State of Secondary Organic Aerosol

Particle phase state is a property of atmospheric aerosols that has important implications for the formation, evolution, and gas/particle partitioning of secondary organic aerosol (SOA). In this work, we use a size-resolved chemistry and microphysics model (SOM-TOMAS), updated to include an explicit treatment of particle phase state, to constrain the bulk diffusion coefficient (Db) of SOA produced from ??- pinene ozonolysis. By leveraging data from laboratory experiments performed in the absence of a seed and under dry conditions, we find that the Db for SOA can be constrained (1-7 ×10-15 cm2 s-1 in these experiments) by simultaneously reproducing the time-varying SOA mass concentrations and the evolution of the particle size distribution. Another version of our model that used the predicted SOA composition to calculate the glass transition temperature, viscosity, and, ultimately, Db (~10-15 cm2 s-1) of the SOA was able to reproduce the mass and size distribution measurements when we included oligomer formation (oligomers accounted for about a fifth of the SOA mass). Our work highlights the potential of a size resolved SOA model to constrain the particle phase state of SOA by utilizing historical measurements of the evolution of the particle size distribution.

He, Yicong↗

High pressure–temperature phase diagram of 1,1-diamino-2,2-dinitroethylene (FOX-7)

In this study, the pressure–temperature (P–T) phase diagram of 1,1-diamino-2,2-dinitroethylene (FOX-7) was determined by in situ synchrotron infrared radiation spectroscopy with the resistively heated diamond anvil cell (DAC) technique. The stability of high-P–T FOX-7 polymorphs is established from ambient pressure up to 10 GPa and temperatures until decomposition. The phase diagram indicates two near isobaric phase boundaries at ~2 GPa (α → I) and ~5 GPa (I → II) that persists from 25 °C until the onset of decomposition at ~300 °C. In addition, the ambient pressure, high-temperature α → β phase transition (~111 °C) lies along a steep boundary (~100 °C/GPa) with a α–β–δ triple point at ~1 GPa and 300 °C. A 0.9 GPa isobaric temperature ramping measurement indicates a limited stability range for the γ-phase between 0.5 and 0.9 GPa and 180 and 260 °C, terminating in a β–γ–δ triple point. With increasing pressure, the δ-phase exhibited a small negative dT/dP slope (up to ~0.2 GPa) before turning over to a positive 70 °C/GPa slope, at higher pressures. The decomposition boundary (~55 °C/GPa) was identified through the emergence of spectroscopic signatures of the characteristic decomposition products as well as trapped inclusions within the solid KBr pressure media.

36 MATERIALS SCIENCE↗

In-situ Experiments to Capture the Evolution of Microstructure During Phase Transformation of Titanium Under Dynamic Loading

Under sufficient stresses, such as during dynamic loading, titanium experiences a phase transformation from hcp alpha phase to hexagonal omega phase. Omega phase is often retained in the microstructure after unloading, and has a strong influence on subsequent mechanical properties. Simulations suggest there are multiple pathways and underlying mechanisms for this transformation. Due to the incredibly short timescales involved, experimental measurements for model validation have been difficult. However, new capabilities at the Advanced Photon Source have enabled diffraction measurements during plate impact experiments to study the evolution of titanium during transformation. These high-rate data allow us to probe the mechanism and kinetics of phase transformations in new ways. Recent results will be presented and compared to post-mortem characterization of soft-recovered shocked specimens. Comparisons are then made with previous tests where material was shock-loaded and soft recovered for microstructural analysis. Together these techniques create a consistent picture of material behavior during the shock-induced α–ω phase transformation in titanium.

36 MATERIALS SCIENCE↗

A high-resolution multi-slit phase space measurement technique for low-emittance beams

Precise measurement of transverse phase space of a high-brightness electron beamis of fundamental importance in modern accelerators and free-electron lasers. Often, the transverse phase space of a high-brightness, space-charge-dominated electron beam is measured using a multi-slit method. In this method, a transverse mask (slit/pepperpot) samples the beaminto a set of beamlets, which are then analyzed on to a screen downstream. The resolution in this method is limited by the type of screen used which is typically around 20 {mu}m for a high-sensitivity Yttrium Aluminum Garnet screen. Accurate measurement of sub-micron transverse emittance using this method would require a long drift space between the multi-slit mask and observation screen. In this paper, we explore a variation of the technique that incorporates quadrupole magnets between the multi-slit mask and the screen. It is shown that this arrangement can improve the resolution of the transverse-phase-space measurement with in a short footprint.

43 PARTICLE ACCELERATORS↗

Ab initio studies on phase transition, thermoelastic, superconducting and thermodynamic properties of the compressed cubic phase of AlH{sub 3}

The phase transition, thermoelastic, lattice dynamic, and thermodynamic properties of the cubic metallic phase AlH{sub 3} were obtained within the density-function perturbation theory. The calculated elastic modulus and phonon dispersion curves under various pressures at 0 K indicate the cubic phase is both mechanically and dynamically stable above 73 GPa. The superconducting transition temperature T{sub c} was calculated using the Allen-Dynes modification of the McMillan formula based on BCS theory. The calculations show that T{sub c} for the cubic phase AlH{sub 3} is 8.5 K (μ{sup *}=0.1) at the onset of this phase (73 GPa), while decreases to 5.7 K at 80 GPa and almost disappears at 110 GPa, consisting with experimental phenomenon that there was no superconducting transition observed down to 4 K over a wide pressure range 110–164 GPa. It is found that the soft phonon mode for branch 1, namely, the lowest acoustic mode, plays a crucial role in elevating the total EPC parameter λ of cubic AlH{sub 3}. And the evolution of T{sub c} with pressure follows the corresponding change of this soft mode, i.e. this mode is responsible for the disappearance of T{sub c} in experiments. Meanwhile, the softening of this lowest acoustic mode originates from the electronic momentum transfer from M to R point. This phenomenon provides an important insight into why drastic changes in the diffraction pattern were observed in the pressure range of 63–73 GPa in Goncharenko's experiments. Specifically, once finite electronic temperature effects are included, we find that dynamical instabilities can be removed in the phonon dispersion for P≥63 GPa, rendering the metastability of this phase in the range of 63–73 GPa, and T{sub c} (15.4 K) becomes remarkably high under the lowest possible pressure (63 GPa) compared with that of under 73 GPa (8.5 K). Our calculations open the possibility that finite temperature may allow cubic AlH{sub 3} to be dynamically stabilized even for pressures below 73 GPa. It is reasonable to deduced that if special techniques, such as rapid decompression, quenching, and annealing, are implemented in experiments, higher T{sub c} can be observed in hydrides or hydrogen-rich compounds under much lower pressure than ever before.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase transitions and the piezoelectricity around morphotropic phase boundary in Ba(Zr{sub 0.2}Ti{sub 0.8})O{sub 3}-x(Ba{sub 0.7}Ca{sub 0.3})TiO{sub 3} lead-free solid solution

In this paper, two displacive phase transitions around the morphotropic phase boundary (MPB) in Ba(Zr{sub 0.2}Ti{sub 0.8})O{sub 3}-x(Ba{sub 0.7}Ca{sub 0.3})TiO{sub 3} (BZT-xBCT) ceramics were detected by inspecting two anomalies of the Raman Ti{sup 4+}-O{sup 2−} longitudinal optical mode (∼725 cm{sup −1}). Further, permittivity and X-ray diffraction results demonstrated these two phase transitions originate from tetragonal (T) to rhombohedral (R) through an intermediate orthorhombic (O) phase. Importantly, we found that the maximum piezoelectric response (d{sub 33} = 545pC/N) was achieved at the boundary between the T and O phase, indicating that the giant piezoelectricity of BZT-xBCT may mainly stem from the T-O phase boundary due to easier polarization rotation and larger lattice softening.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Impact of relative phase shift on inward turbulent spreading

The relative cross-phase between density, temperature, and potential perturbations plays a major role in turbulent spreading and transport. Nonlinear Landau-Fluid simulations show that the electron wave-particle resonances provide a relatively strong parallel damping effect on the electron temperature perturbation and can induce a relative cross-phase shift of smaller than π∕2 angle between E × B velocity and the electron temperature perturbation for large electron temperature gradient, which yields a large spreading for electron. The relative phase for ions is about π∕2 and has no turbulent spreading effect on it. The inward turbulent spreading stops at the position where the radial turbulent correlation length is shorter than the magnetic surface spacing. The temperature pedestal height determines the energy loss due to the turbulent spreading.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An insight into the origin of low-symmetry bridging phase and enhanced functionality in systems containing competing phases

High piezoelectric activity of ferroelectrics with morphotropic phase boundary (MPB) compositions has been the focus of numerous recent investigations. The concept of a bridging low-symmetry phase between competing phase structures of the MPB composition remains controversial due to the compositional inhomogeneity near the MPB and the lack of appropriate experimental techniques to delineate the complex crystal structures. We have studied a simple ferroelectric BaTiO 3 by employing a high resolution synchrotron-based technique, in which the formation of different symmetry regions due to chemical inhomogeneity can be ruled out. As a result, we observed two types of thermotropic phase boundaries, revealing the importance of interphase-strain in the formation of a bridging phase between competing phases and the enhancement of functionality.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mesoscale evolution of voids and microstructural changes in HMX-based explosives during heating through the β-δ phase transition

HMX-based explosives LX-10 and PBX-9501 were heated through the β-δ phase transition. Ultra-small angle x-ray scattering (USAXS) and molecular diffraction were simultaneously recorded as the HMX was heated. Mesoscale voids and structure dramatically change promptly with the β-δ phase transition, rather than with other thermal effects. Also, x-ray induced damage, observed in the USAXS, occurs more readily at elevated temperatures; as such, the dose was reduced to mitigate this effect. Optical microscopy performed during a similar heating cycle gives an indication of changes on longer length scales, while x-ray microtomography, performed before and after heating, shows the character of extensive microstructural damage resulting from the temperature cycle and solid-state phase transition.

36 MATERIALS SCIENCE↗

Phase transitions and magnetocaloric and transport properties in off-stoichiometric GdNi{sub 2}Mn{sub x}

The structural, magnetic, magnetocaloric, transport, and magnetoresistance properties of the rare-earth intermetallic compounds GdNi{sub 2}Mn{sub x} (0.5 ≤ x ≤ 1.5) have been studied. The compounds with x = 0.5 and 0.6 crystallize in the cubic MgCu{sub 2} type phase, whereas samples with x ≥ 0.8 form a mixed MgCu{sub 2} and rhombohedral PuNi{sub 3} phase. A second order magnetic phase transition from a ferromagnetic to paramagnetic state was observed near the Curie temperature (T{sub C}). The GdNi{sub 2}Mn{sub x} (0.5 ≤ x ≤ 1.5) compounds order in a ferrimagnetic structure in the ground state. The largest observed values of magnetic entropy changes (at T{sub C} for ΔH = 5T) were 3.9, 3.5, and 3.1 J/kg K for x = 0.5, 0.6, and 0.8, respectively. The respective relative values of the cooling power were 395, 483, and 220 J/kg. These values are greater than some well-known prototype magnetocaloric materials such as Gd (400 J/kg) and Gd{sub 5}Si{sub 2}Ge{sub 2} (240 J/kg). Analysis of the resistivity data showed a T{sup 2} dependence at low temperatures, suggesting strong electron-phonon interactions, whereas at higher temperatures s-d scattering was dominated by the electron-phonon contribution, resulting in a slow increase in resistivity. Magnetoresistance values of ∼−1.1% were found for x = 0.5 near T{sub C}, and −7% for x = 1.5 near T = 80 K.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗