Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PALLADIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Mercury oxidation in flue gas using gold and palladium catalysts on fabric filters

The feasibility of oxidizing elemental mercury in coal combustion flue gas using catalytic material impregnated onto fabric filters was explored. TiO{sub 2}, Au/TiO{sub 2}, and Pd/Al{sub 2}O{sub 3} were studied based on promising results in previous research. Several fabric coating methods were investigated to determine the best way to load a filter. A spray coat method was found to have the highest initial loading and had the lowest losses after simulated pulse-jet cleaning. The oxidation performance of the catalyst-coated filters was tested using a simulated flue gas in a bench-scale reactor under conditions similar to those found in a baghouse. Au/TiO{sub 2} and Pd/Al{sub 2}O{sub 3} were effective, yielding mercury oxidation ranges of 40-60% and 50-80%, respectively. A 19 kW research combustor equipped with a baghouse was used to fire a range of coals and further test the performance of Pd/Al{sub 2}O{sub 3}. Results obtained warrant further development of this technique as a means of mercury pollution control. 19 refs., 2 figs., 5 tabs.

01 COAL, LIGNITE, AND PEAT↗

Understanding How Surface Morphology and Hydrogen Dissolution Influence Ethylene Hydrogenation on Palladium

Ethylene hydrogenation is a prototypical reaction for catalytic hydrogenation of unsaturated hydrocarbons and as such it has been studied on a number of metals. On single crystalline Pd(111), Pd(110), and Pd(100) surfaces this reaction has been shown to be structure insensitive and to occur with extremely low yield (0.1%) (refs). Recent studies on support4ed Pd particles showed an approximately 10-folded increase in the ethane yield per surface Pd atom which was attributed to the increased surface to bulk Pd ratio on the particles thereby giving rise to reduced sorption of hydrogen into the bulk. The enhanced concentration of surface hydrogen is believed to result in the observed increase in catalytic activity. Even on these nanoparticles the C2H6 yield is relatively low (~2%)(refs).

08 HYDROGEN↗

Epitaxial Overgrowth of Platinum on Palladium Nanocrystals

This paper describes a systematic study on the epitaxial overgrowth of Pt on well-defined Pdnanocrystals with different shapes (and exposed facets), including regular octahedrons, truncated octahedrons, and cubes. Two different reducing agents, i.e., citric acid and L-ascorbic acid, were evaluated and compared for the reduction of K{sub 2}PtCl{sub 4} in an aqueous solution in the presence of Pdnanocrystal seeds. When citric acid was used as a reducing agent, conformal overgrowth of octahedral Pt shells on regular and truncated octahedrons of Pd led to the formation of Pd-Pt core-shell octahedrons, while non-conformal overgrowth of Pt on cubic Pd seeds resulted in the formation of an incomplete octahedral Pt shell. On the contrary, localized overgrowth of Pt branches was observed when L-ascorbic acid was used as a reducing agent regardless of the facets expressed on the surface of Pdnanocrystal seeds. This work shows that both the binding affinity of a reducing agent to the Pt surface and the reduction kinetics for a Pt precursor play important roles in determining the mode of Pt overgrowth on Pdnanocrystal surface.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Molecular beam-thermal hydrogen desorption from palladium

Among the most efficient techniques for hydrogen desorption monitoring, thermal desorption mass spectrometry is a very sensitive one, but in certain cases can give rise to uptake misleading results due to residual hydrogen partial pressure background variations. In this work one develops a novel thermal desorption variant based on the effusive molecular beam technique that represents a significant improvement in the accurate determination of hydrogen mass absorbed on a solid sample. The enhancement in the signal-to-noise ratio for trace hydrogen is on the order of 20%, and no previous calibration with a chemical standard is required. The kinetic information obtained from the hydrogen desorption mass spectra (at a constant heating rate of 1 deg. C/min) accounts for the consistency of the technique.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Kinetics of the sulfur oxidation on palladium: A combined in situ x-ray photoelectron spectroscopy and density-functional study

We studied the reaction kinetics of sulfur oxidation on the Pd(100) surface by in situ high resolution x-ray photoelectron spectroscopy and ab initio density functional calculations. Isothermal oxidation experiments were performed between 400 and 500 K for small amounts ({approx}0.02 ML) of preadsorbed sulfur, with oxygen in large excess. The main stable reaction intermediate found on the surface is SO{sub 4}, with SO{sub 2} and SO{sub 3} being only present in minor amounts. Density-functional calculations depict a reaction energy profile, which explains the sequential formation of SO{sub 2}, SO{sub 3}, and eventually SO{sub 4}, also highlighting that the in-plane formation of SO from S and O adatoms is the rate limiting step. From the experiments we determined the activation energy of the rate limiting step to be 85 {+-} 6 kJ mol{sup -1} by Arrhenius analysis, matching the calculated endothermicity of the SO formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An amorphous phase formation at palladium / silicon oxide (Pd/SiO{sub x}) interface through electron irradiation - electronic excitation process

A Pd-Si amorphous phase was formed at a palladium/silicon oxide (Pd/SiO{sub x}) interface at room temperature by electron irradiation at acceleration voltages ranging between 25 kV and 200 kV. Solid-state amorphization was stimulated without the electron knock-on effects. The total dose required for the solid-state amorphization decreases with decreasing acceleration voltage. This is the first report on electron irradiation induced metallic amorphous formation caused by the electronic excitation at metal/silicon oxide interface.

36 MATERIALS SCIENCE↗

Interaction of hydrogen with palladium clusters deposited on graphene

Hydrogen adsorption on nanoporous carbon materials is a promising technology for hydrogen storage. However, pure carbon materials do not meet the technological requirements due to the week binding of hydrogen to the pore walls. Experimental work has shown that doping with Pd atoms and clusters enhances the storage capacity of porous carbons. Therefore, we have investigated the role played by the Pd dopant on the enhancement mechanisms. By performing density functional calculations, we have found that hydrogen adsorbs on Pd clusters deposited on graphene following two channels, molecular adsorption and dissociative chemisorption. However, desorption of Pd-H complexes competes with desorption of hydrogen, and consequently desorption of Pd-H complexes would spoil the beneficial effect of the dopant. As a way to overcome this difficulty, Pd atoms and clusters can be anchored to defects of the graphene layer, like graphene vacancies. The competition between molecular adsorption and dissociative chemisorption of H{sub 2} on Pd{sub 6} anchored on a graphene vacancy has been studied in detail.

36 MATERIALS SCIENCE↗

Ab initio study of palladium and silicon carbide

Ab initio methods have been used to investigate the properties of Pd as impurity in bulk SiC at five charge states within the framework of density functional theory using the local density spin approximation. Pd interstitials and substitutionals have similar energy to their intrinsic counterparts. In addition, Pd substitutes for a vacancy, di-vacancy, and tri-vacancy with similar energies. Pd will also diffuse through SiC via an interstitial mechanism employing the tetrahedral sites and Pd can substitute for Si and C at positive charge states. Removing electrons (p-type doping) from SiC lowers the formation and migration energies of Pd defects in SiC for most configurations.

36 MATERIALS SCIENCE↗

Ab initio study of the adsorption, migration, clustering, and reaction of palladium on the surface of silicon carbide

This work presents first principle calculations to understand the adsorption, clustering, migration, and reaction of Pd on three different surfaces of 3C-SiC ({l_brace}111{r_brace}, {l_brace}100{r_brace} C-terminated, and {l_brace}100{r_brace} Si-terminated). The surfaces were chosen based upon experimental and theoretical work. Pd preferably binds to Si-terminated surfaces and has higher migration energies on these surfaces. Pd has low migration energies on non-Si-terminated surfaces facilitating the creation of Pd clusters. About 0.5 eV is gained per Pd atom added to a cluster. Reaction mechanisms are reported for Pd reacting on {l_brace}100{r_brace} surfaces. On the {l_brace}100{r_brace} C-terminated surfaces, a single Pd atom can substitute for a C with an energy barrier of 0.48 eV and two Pd atoms can substitute for two C atoms with an energy barrier of 0.04 eV. In both cases, the Pd atoms form Pd-C-C bridges between Si lattice sites. For the {l_brace}100{r_brace} Si-terminated surface, a single Pd atom can substitute for a Si atom with an energy barrier is 1.53 eV. No comparable low energy pathways were found on the {l_brace}111{r_brace} surface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hydrogen Dissociation and Spillover on Individual Isolated Palladium Atoms

Using a combination of low-temperature scanning tunneling microscopy and density functional theory it is demonstrated how the nature of an inert host metal of an alloy can affect the thermodynamics and kinetics of a reaction pathway in a much more profound way than simply a dilution, electronic, or geometric effect. This study reveals that individual, isolated Pd atoms can promote H{sub 2} dissociation and spillover onto a Cu(111) surface, but that the same mechanism is not observed for an identical array of Pd atoms in Au(111).

36 MATERIALS SCIENCE↗

Characterization of ALD copper thin films on palladium seed layers

A method for fabricating monolithic nanoscopic tunnel junctions (MNTJs) for tunneling spectroscopy measurements using atomic layer deposition (ALD) of Cu on Pd seed layers has recently been introduced [Gupta and Willis, Appl. Phys. Lett. 90, 253102 (2007)]. The ALD grown layers are characterized here using planar thin films as models for the nanoelectrode composition and structure. ALD Cu films grown on Pd seed layers using a varying number of deposition cycles were characterized using transmission electron microscopy, Auger electron spectroscopy (AES), and glancing incidence x-ray diffraction (GIXRD) to investigate the chemical composition and structure of the nanoelectrodes. Electron diffraction and GIXRD show that as Cu is deposited, the bulk composition progresses from being Pd rich to becoming predominately Cu. In contrast, AES data show that significant Pd consistently remains on the surface of the growing film. The divergence in surface and bulk behaviors is attributed to Pd surface segregation that is driven by hydrogen adsorption during the ALD process. In contrast to the results for Pd seed layers, it is demonstrated that Pt seed layers can be used to grow pure Cu ALD films. This is because hydrogen adsorption does not induce Pt surface segregation within the ALD temperature window.

36 MATERIALS SCIENCE↗

Development of Poison Resistant Palladium Alloys for Hydrogen Processing

Synthetic capability to make Pd alloys at SRNL has been established by the synthesis of three test foils of nominal chemical formula Pd 0.9 Rh 0.1 , Pd 0.86 Rh 0.1 Y 0.04 , and Pd 0.84 Au 0.15 Y 0.01 . These alloy foils were produced by melting appropriate amount of the pure elements in a tube furnace under argon, followed by rolling the resultant buttons to 150-200 micron thicknesses. Alloy quality was assessed by measuring the degree of crystallinity and contaminant content by X-ray diffraction (XRD) and the level of chemical homogeneity by Energy Dispersive X-ray (EDX) analysis spectra and elemental maps coupled with Scanning Electron Microscopy (SEM). Hydrogen isotope absorption/desorption behaviors were also characterized by obtaining hydrogen and deuterium isotherms.

36 MATERIALS SCIENCE↗

Palladium and Tin Alloyed Catalysts for the Ethanol Oxidation Reaction in an Alkaline Medium

In this paper, we present a study of a series of carbon-supported Pd-Sn binary alloyed catalysts prepared through a modified Polyol method as anode electrocatalysts for direct ethanol fuel cell reactions in an alkaline medium. Transmission electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and aberration-corrected scanning transmission electron microscopy equipped with electron energy loss spectroscopy were used to characterize the Pd-Sn/C catalysts, where homogeneous Pd-Sn alloys were determined to be present with the surface Sn being partially oxidized. Among various Pd-Sn catalysts, Pd{sub 86}Sn{sub 14}/C catalysts showed much enhanced current densities in cyclic voltammetric and chronoamperometric measurements, compared to commercial Pd/C (Johnson Matthey). The overall rate law of ethanol oxidation reaction for both Pd{sub 86}Sn{sub 14}/C and commercial Pd/C were also determined, which clearly showed that Pd{sub 86}Sn{sub 14}/C was more favorable in high ethanol concentration and/or high pH environment. Density functional theory calculations also confirmed Pd-Sn alloy structures would result in lower reaction energies for the dehydrogenation of ethanol, compared to the pure Pd crystal.

30 DIRECT ENERGY CONVERSION↗