Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Outer approximation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

On the theory of the turbulent boundary layer

As a rule, a division of the turbulent boundary layer is admissible: a division into a part near the wall, where the flow is governed only by the wall effects, and into an outer part, where the wall roughness and the viscosity of the flow medium affects only the wall shearing stress occurring as boundary condition but does not exert any other influence on the flow. Both parts may be investigated to a large extent independently. Under certain presuppositions there result for the outer part "similar" solutions. The theoretical considerations give a cue how to set up, by appropriate experiments and their evaluation, generally valid connections which are required for the approximate calculation of the turbulent boundary layer according to the momentum and energy theorem.

TURBULENCE↗

Determination of nitrogen to carbon abundance ratios from transition layer emission lines

We have finished studying the nitrogen to carbon abundance ratios for stars with different effective temperatures T(sub eff) and luminosities using transition layer emission lines and using spectra available in the IUE archives. The N/C abundance ratio determinations using transition layer emission lines are as accurate as the photospheric abundance determinations as found by comparison of results obtained by both methods for the same stars. Our measurements confirm photospheric abundance determinations in regions of the HR diagram where they can be obtained. Our studies have extended the temperature range to higher temperatures. They have shown the exact positions in the HR diagram where the mixing due to the outer convection zones reaches deep enough to bring nuclear processed material to the surface. This occurs at effective temperatures which are higher by delta log T(sub eff) approximately 0.04 or roughly 400 K than expected theoretically. Since the depth of the convection zone increases rapidly with decreasing T(sub eff) this may indicate considerable overshoot beyond the lower boundary of the convection zone. Our N/C abundance ratio determinations from transition layer emission lines have confirmed that the actual enrichment observed for some cool giants is larger than expected theoretically, again indicating a larger degree of mixing in several stars either from below or from above. For the supergiants it probably indicates overshoot above the convective core in the progenitor main sequence stars. For the more massive giants this may also be the case, though we did not find a correlation between delta log N/C and the absolute magnitudes, but these are rather uncertain. As byproducts of these studies we also found anomalies in Si/C and N/C abundance ratios for F giants which can be understood as the relict of surface abundance changes for their main sequence progenitors due to diffusion. This anomaly disappears for G giants, for which the depths of the convection zones are apparently deep enough to wipe out these element separations (Bohm-Vitense 1992).

Boehm-Vitense, Erika↗

Radiation-Driven Warping: Nonisothermal Disks - 2

Recent work by Pringle and by Maloney, Begelman, & Pringle has shown that geometrically thin, optically thick, accretion disks are unstable to warping driven by radiation torque from the central source. This work was confined to isothermal (i.e., surface density Sigma varies as R(sup -3/2) disks. In this paper we generalize the study of radiation-driven warping to include general power-law surface density distributions, Sigma varies as R(sup -delta).We consider the range from Delta = 3/2 (the isothermal case) to Delta = -3/2, which corresponds to a radiation-pressure-supported disk; this spans the range of surface density distributions likely to be found in real astrophysical disks. In all cases there are an infinite number of zero-crossing solutions (i.e., solutions that cross the equator), which are the physically relevant modes if the outer boundary of the disk is required to lie in a specified plane. However, unlike the isothermal disk, which is the degenerate case, the frequency eigenvalues for Delta does not equal 3/2 are all distinct. In all cases the location of the zero moves outward from the steady state (pure precession) value with increasing growth rate; thus, there is a critical minimum size for unstable disks. Modes with zeros at smaller radii are damped. The critical radius and the steady state precession rate depend only weakly on Delta. An additional analytic solution has been found for Delta = 1. The case Delta = 1 divides the solutions into two qualitatively different regimes. For Delta greater than or equal to 1, the fastest growing modes have maximum warp amplitude, close to the disk outer edge, and the ratio of Beta(sub max) to the warp amplitude at the disk inner edge, Beta(sub o), is much greater than 1. For Delta less than 1, Beta(sub max/Beta(sub o) approximately equals 1, and the warp maximum steadily approaches the origin as Delta decreases. This implies that nonlinear effects must be important if the warp extends to the disk inner edge for Delta greater than or equal to 1, but for Delta less than 1 nonlinearity will be important only if the warp amplitude is large at the origin. Because of this qualitative difference in the shapes of the warps, the effects of shadowing of the central source by the warp will also be very different in the two regimes of Delta. This has important implications for radiation-driven warping in X-ray binaries, for which the value of Delta characterizing the disk is likely to be less than unity. In real accretion disks the outer boundary condition is likely to be different from the zero-crossing condition that we have assumed. In accretion disks around massive black holes in active galactic nuclei, the disk will probably become optically thin before the outer disk boundary is reached, whereas in X-ray binaries there will be an outer disk region (outside the circularization radius) in which the inflow velocity is zero but angular momentum is still transported. We show that in both these cases the solutions are similar to the zero-crossing eigenfunctions.

Maloney, Philip R.↗

Hydrodynamic Stability and Magnetic Reconnection in Disks and Stars

The purpose of this grant is to study parametric instability. The simplest example of parametric instability is a harmonic oscillator with a periodic modulation of the spring constant. If the modulation frequency is close to twice the natural frequency of the oscillator, the amplitude of oscillation tends to grow exponentially. The growth rate is proportional to the strength of the modulation, but it also depends upon the closeness to resonance of the two frequencies, and upon natural damping rate or "Q" of the oscillator. Parametric instabilities are very common in physics. A familiar example is a jogger's ponytail--normally a very strongly damped pendulum, it can be destabilized by the variation in effective gravity during the jogger's stride. Observation confirms that the period of the pendulum is half that of the jogger's vertical motion. In astrophysics, parametric instability may occur by external tidal forcing, or by interaction among eigenmodes. In the latter case, an energetic eigenmode may destabilize modes of half its frequency, provided some weak nonlinearity exists to couple them. Under a previous Astrophysical Theory grant (NAGW-2419), the PI discovered a parametric instability of tidally forced disks such as the accretion disks in cataclysmic variables and X ray binaries [2]. The destabilized modes are tightly-wound, incompressible, three-dimensional waves analogous to g-modes and r-modes in stars. Later work has confirmed our analysis [4]. It was hoped that these modes might provide a source of turbulence and angular momentum transport in accretion disks. However, a follow-up investigation of this instability by local numerical simulations, although confirming the analytically estimated growth rates, found negligible angular momentum flux [3]. Other work, partly supported by the ATP, now strongly indicates that the transport mechanism in such disks is magnetohydrodynamic turbulence [6]. Nevertheless, the parametric mechanism may truncate the outer edges of disks in close binaries [2], and it may be important in disks of very low ionization such as protostellar disks, or even cataclysmic-variable disks in quiescence where the MHD mechanism may be ineffective [5]. All analyses up to 1996 were done in a local approximation where the orbital frequency, shear rate, and tidal field were treated as constants. The locally computed growth rate turns out to depend strongly on radius, and it was unclear how to average these local rates to obtain the correct global rate. This is a critical issue for accretion disks in close binaries, because the local growth rate is comparable to the orbital frequency towards the outer edge of the disk but decreases rapidly inwards. Paper #1 examined this issue in a simplified global model where the destabilizing terms vary with position. We found that the global growth rate is essentially equal to the maximum local rate, provided that the latter is smoothed over a radial range equal to the distance that the destabilized wave propagates at its group speed in one growth time. Thus, in an accretion disk, waves would grow rapidly in the outer parts but would propagate both inwards and outwards at a maximum group speed of order the disk thickness divided by the orbital period.

Goodman, Jeremy↗

Characterizing the seismic response of a molten salt nuclear reactor

Abstract One Generation IV nuclear reactor, which uses a fluoride salt as a coolant, graphite reflector blocks as a moderator, and circulating buoyant TRISO pebbles as fuel is at an advanced stage of development. To characterize the seismic behavior of components of this reactor, validate numerical models for analysis, and develop recommendations for design, a set of earthquake‐simulator experiments on a scaled model of the reactor vessel and its internals was executed on a six‐degree‐of‐freedom earthquake simulator. The model was seismically isolated at its base using two types of spherical sliding bearings. The scaled model involved representations of the prototype reactor vessel, core barrel, reflector blocks, coolant, and spherical fuel pebbles. The material and geometric properties of different test components were selected based on a dynamic similitude scaling analysis and an approximate length scale of 0.4. Four sets of three‐component earthquake motions were used as inputs for testing. Instrumentation on the test specimen recorded the dynamic responses of the outer vessel, core barrel, and reflector‐block assembly, the hydrodynamic responses (sloshing and hydrodynamic pressure) of the liquid coolant, pebble consolidation under earthquake shaking, and the behavior of the isolation systems. This paper describes the design of the experiments and presents key results from the tests. The dynamic responses of the outer vessel, core barrel, and the reflector blocks revealed that the components responded as a unit for the intense shaking used in the experiments. The sloshing response of the fluid in a thin annulus near the perimeter of the vessel was heavily damped. The change in the packing fraction of the pebble bed under repeated, intense 3D earthquake shaking was less than 3%. Seismically isolating the vessel substantially reduced demands on its internal components.

Engineering↗

Direct stellarator coil optimization for nested magnetic surfaces with precise quasi-symmetry

We present a robust optimization algorithm for the design of electromagnetic coils that generate vacuum magnetic fields with nested flux surfaces and precise quasi-symmetry. The method is based on a bilevel optimization problem, where the outer coil optimization is constrained by a set of inner least squares optimization problems whose solutions describe magnetic surfaces. The outer optimization objective targets coils that generate a field with nested magnetic surfaces and good quasi-symmetry. The inner optimization problems identify magnetic surfaces when they exist, and approximate surfaces in the presence of magnetic islands or chaos. We show that this formulation can be used to heal islands and chaos, thus producing coils that result in magnetic fields with precise quasi-symmetry. We show that the method can be initialized with coils from the traditional two-stage coil design process, as well as coils from a near-axis expansion optimization. We present a numerical example where island chains are healed and quasi-symmetry is optimized up to surfaces with aspect ratio 6. Another numerical example illustrates that the aspect ratio of nested flux surfaces with optimized quasi-symmetry can be decreased from 6 to approximately 4. In conclusion, the last example shows that our approach is robust and a cold-start using coils from a near-axis expansion optimization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nucleosynthesis of an 11.8 M ⊙ Supernova with 3D Simulation of the Inner Ejecta: Overall Yields and Implications for Short-lived Radionuclides in the Early Solar System

Based on a 3D supernova simulation of an 11.8 M ⊙ progenitor model with an initial solar composition, we study the nucleosynthesis using tracers covering the innermost 0.1 M ⊙ of the ejecta. These ejecta are mostly proton-rich and contribute significant amounts of 45 Sc and 64 Zn. The production of heavier isotopes is sensitive to the electron fraction and hence the neutrino emission from the proto-neutron star. The yields of these isotopes are rather uncertain due to the approximate neutrino transport used in the simulation. In order to obtain the total yields for the whole supernova, we combine the results from the tracers with those for the outer layers from a suitable 1D model. Using the yields of short-lived radionuclides (SLRs), we explore the possibility that an 11.8 M ⊙ supernova might have triggered the formation of the solar system and provided some of the SLRs measured in meteorites. In particular, we discuss two new scenarios that can account for at least the data on 41 Ca, 53 Mn, and 60 Fe without exceeding those on the other SLRs.

Astronomy & Astrophysics↗

X-ray spectra of Orion OB supergiants

The spectra are at a higher energy resolution than earlier X-ray observations of OB supergiants, and this allows stronger constraints to be placed on the location of the emission source in the outer atmosphere. The spectra of all three stars are found to be consistent with thermal sources which are only slightly attenuated by stellar wind opacity and have temperatures of approximately 10 to the (6.5 + or - 0.2) power K. A number of explanations of the soft X-ray flux distributions of early-type stars are tested. A model with the X rays coming only from a corona in a slab at the base of the wind does not seem a possibility unless the ionization or density structure of the overlying material is significantly different from that usually assumed for a cool wind. A model where the X rays are produced by radiatively driven shocks, some of which must be strong, can explain the X-ray luminosity and satisfy upper limits on the absorption by oxygen derived from the data. A high-energy (greater than 1 keV) contribution from a base coronal zone is considered possible. The spectrum of Zeta Ori shows emission near 2 keV, wich can be interpreted as line emission of Si XIII and S XV from a very hot source component with T = 1.5 x 10 to the 7th K.

Cassinelli, J. P.↗

Harmonically structured ULF pulsations observed by the AMPTE CCE magnetic field experiment

Spectrograms of ULF waves in the 0 to 80 mHz frequency range have been prepared from magnetic field data obtained by the elliptically orbiting AMPTE/CCE satellite (with an apogee of approximately 8.8 earth radii). The most prominent feature of these spectrograms (which cover a full 15.6-h orbit) is the presence of harmonically structured, azimuthally polarized pulsations in the outer magnetosphere during daytime hours. The frequencies of these pulsations decrease with increasing radial distance from the earth, indicating that they represent independent resonances of local magnetic flux tubes. The latitudinal structure of these harmonic pulsations, observed as AMPTE/CCE traveled to + or - 16 deg magnetic latitude, is consistent with accepted field line resonance models.

Engebretson, M. J.↗

Steady state cooling flow models for normal elliptical galaxies

An extensive grid of steady state cooling flow models for the hot gas in elliptical galaxies is calculated. The effects of allowing inflow of surrounding gas and varying the supernova heating rate, the mass distribution of the galaxy, the rate of stellar mass loss, and the outer boundary pressure are studied. The X-ray luminosities, spectra, and surface brightness profiles of the galaxies are computed. In all of the models, the gas density varies approximately as r exp -3/2. In the models with heavy halos, the X-ray and optical surface brightnesses are nearly proportional to one another within individual galaxies, and the temperature profiles are roughly isothermal.

Sarazin, Craig L.↗

Singular perturbation and time scale approaches in discrete control systems

After considering a singularly perturbed discrete control system, a singular perturbation approach is used to obtain outer and correction subsystems. A time scale approach is then applied via block diagonalization transformations to decouple the system into slow and fast subsystems. To a zeroth-order approximation, the singular perturbation and time-scale approaches are found to yield equivalent results.

Naidu, D. S.↗

Areas of Seal R/D at GE

About four years ago, work was completed on a 36 inch diameter gas to gas carbon ring seal used to buffer low pressure turbine air at the rim of the forward outer flowpath on the GE36 unducted fan (UDF) engine. At about the same time, we were developing a long life counter-rotating intershaft air-oil seal of approximately 7.6 inch diameter for operation at 800 fps, 800 F, and 50 psid. Although we were successful in meeting most program goals with a split ring seal of the axial bushing type, the seal with the greatest payoff in life and air leakage rates, bearing many features in common with the GE36 seal, could not be successfully tested because of the structural weakness of the primary seal ring carbon material. This was a split ring seal using a hybrid combination of orifice compensated hydrostatic and shrouded hydrodynamic gas bearings. We are presently working to develop this design in conjunction with high strength materials being developed by Pure Carbon Co. In the area of engine secondary gas flow path-sealing for performance improvement, we are currently working with carbon and all metal face seals. A 15 inch diameter all metal 'aspirating' face seal, using self-acting hydrostatic bearings, was successfully tested to 700 fps, 100 psid, and 1000 F, demonstrating long life at flow reduction of 86 percent compared to a 'best' labyrinth. This seal will be developed through 1400 F, 900 fps, and 350 psid. The seal 'aspirates' closed at about idle speed pressure during engine start and reopens at engine shutdown. A hydraulic thrust balance seal, currently using orifice compensated hydrostatics, is under development. Other aspects of these projects are briefly covered.

Pope, A. Nelson↗

A local instability of tidally distorted accretion disks

Hydrodynamic accretion disks in binary star systems have local, three-dimensional, approximately incompressible instabilities whose growth rate is linearly proportional to the tidal field of the secondary star. The instability occurs throughout the disk but is most rapid in the outer parts. The free energy for the instability derives from the tidal distortion of the disk rather than its differential rotation. The instability will excite m-parallel 1 internal waves of the type discussed by Vishniac et al. (1992), and it should facilitate return of angular momentum from the disk to the secondary star. It is closely related to a recently discovered instability that has been suggested as a mechanism for transition to turbulence in terrestrial and laboratory flows, but whether it will lead to strong turbulence in disks is as yet unclear.

Goodman, Jeremy↗

Test Report - Fault Current Through Graphite Filament Reinforced Plastic

Tests were performed to determine the damage to samples of composite material when a current carrying wire is shorted to the surface of the composite material, and to determine whether enough current can flow through the material to blow a fuse before damage can occur. Fault current tests were performed on samples of graphite epoxy materials. Samples consisted of six layers of IM7 graphite fiber mat in Hercules 8552 epoxy resin. A variable power supply provided up to 35 amps of current. The high voltage side of the power supply was attached to a wire at the end of a hinged arm, and the low side was attached to the edge of the sample. To test joints, the return was connected to the edge of one sample, and the high side was shorted to the top of the other sample. Tests show that when current exceeds approximately 5 amps, the graphite glows, and the epoxy melts out at the shorted contact. At higher current levels the epoxy burns. At voltages above 15 volts the epoxy outer coat is easily broken, and fire, flame, and a rise in current occur suddenly. When joints are introduced, resistance is increased, and the maximum current resulting from a short circuit to the graphite epoxy is reduced. This condition can easily result in fault current lower than the circuit breaker limit and higher than the 5 amp ignition level. The shorting contact and the joint become hot spots with melting epoxy, smoke, and fire.

Evans, R. W.↗

HST-COS Observations on Hydrogen, Helium, Carbon, and Nitrogen Emission from the SN 1987A Reverse Shock

We present the most sensitive ultraviolet observations of Supernova 1987 A to date. Imaging spectroscopy from the Hubble Space Telescope-Cosmic Origins Spectrograph shows many narrow (Delta v approximates 300 km/s) emission lines from the circumstellar ring, broad Delta v approximates 10-20 x 10(exp 3) km/s) emission lines from the reverse shock, and ultraviolet continuum emission. The high signal-to-noise ratio (>40 per resolution element) broad Ly-alpha emission is excited by soft X-ray and EUV heating of mostly neutral gas in the circumstellar ring and outer supernova debris. The ultraviolet continuum at lambda > 1350 A can be explained by H-I two-photon (2s(exp 2)S(sub 1/2)-l(exp 2)S(sub 1/2)) emission from the same region. We confirm our earlier, tentative detection of N V lambda 1240 emission from the reverse shock and present the first detections of broad He II lambda1640, C IV lambda 1550, and N IV ] lambda1486 emission lines from the reverse shock. The helium abundance in the high-velocity material is He/H = 0.14 +/- 0.06. The N V /H alpha line ratio requires partial ion-electron equilibration (T(sub e)/T(sub p) approximately equal to 0.14-0.35). We find that the N/C abundance ratio in the gas crossing the reverse shock is significantly higher than that in the circumstellar ring, a result that may be attributed to chemical stratification in the outer envelope of the supernova progenitor. The N/C abundance may have been stratified prior to the ring expUlsion, or this result may indicate continued CNO processing in the progenitor subsequent to the expUlsion of the circumstellar ring.

France, Kevin↗

Spatially Resolved Proteome Profiling of <200 Cells from Tomato Fruit Pericarp by Integrating Laser-Capture Microdissection with Nanodroplet Sample Preparation

Due to sensitivity limitations, global proteome measurements generally require large amounts of biological starting material, which masks heterogeneity within the samples and differential protein expression among constituent cell types. Methods for spatially-resolved proteomics are being developed to resolve protein expression for distinct single cell types among highly heterogeneous tissues, but have primarily been applied to mammalian systems. Here we evaluate the performance of cell-type-specific proteome analysis of tomato fruit pericarp tissues by a platform integrating laser capture microdissection (LCM) and a recently developed automated sample preparation system (nanoPOTS, Nanodroplet processing in One pot for Trace Samples). Tomato fruits were cryosectioned prior to LCM, and tissues were dissected and captured directly into nanoPOTS chips for processing. Following processing, samples were analyzed by nanoLC-MS/MS. Approximately 1900 unique peptides and 422 proteins were identified on average from ~0.04 mm2 tissues comprising ~ 8-15 parenchyma cells. Spatially-resolved proteome analyses were performed using cells of outer epidermis, collenchyma, and parenchyma. Using =200 cells, a total of 1,870 protein groups were identified and the various tissues were easily resolved. The results provide spatial and tissue-specific insights into key enzymes and pathways involved in carbohydrate transport and source-sink relationships in tomato fruit. Of note, at the time of fruit ripening studied here, we identified differentially abundant proteins throughout the pericarp related to chlorophyll biogenesis, photosynthesis, and especially transport.

Liang, Yiran↗

Substorm-associated reconfiguration of the dusk side equatorial magnetosphere - A possible source mechanism for isolated plasma regions

A rapid reconfiguration of the dusk side magnetosphere was observed near the magnetic equator by particle and field experiments aboard Explorer 45 at 1715 UT on June 17, 1972. Following the onset of an 800-gamma negative bay in the auroral zone, Explorer 45, inbound at 1700 MLT and L about 5, observed a sharp dropout of outer zone electrons. Simultaneously, the plasma density dropped from a level typical of the plasmasphere to one typical of the ion trough, and plasma sheet proton fluxes increased, producing a 100-gamma depression in B, in a shift to a taillike configuration. Outer zone electrons with pitch angles near 45 deg returned with delay times consistent with injection near midnight at the time of dropout and eastward drift to the dusk meridian. Approximately 45 min after the reconfiguration, the satellite reentered the plasmasphere, and the electron fluxes returned to previous levels. In the next orbit, approximately 6 hours later, a region of isolated plasma was detected near apogee at 1400 MLT. There is therefore circumstantial evidence that the type of magnetospheric reconfiguration observed here is responsible for the detachment of regions of cold plasma from the plasmasphere.

Barfield, J. N.↗

Curvature effects on stagnation radiative transfer in shock wave around blunt axisymmetric bodies

During hypersonic entry of a probe into the atmospheres of outer planets, the radiative energy transport in the shock-heated layer is of great significance in computing the heating to the heat shield. The so-called tangential slab approximation is frequently employed to evaluate the radiative flux to the surface of entry probes. A simple assessment of the accuracy of the tangential slab approximation at the stagnation point is given here for blunt axisymmetric bodies of various shock shapes which include spheres, paraboloids, hyperboloids and ellipsoids of different shock parameters.

Poon, P. T. Y.↗