Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ORIENTATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

In-plane Néel wall chirality and orientation of interfacial Dzyaloshinskii-Moriya vector in magnetic films

The interfacial Dzyaloshinskii-Moriya interaction (DMI) is of great interest as it can stabilize chiral spin structures in thin films. Experiments verifying the orientation of the interfacial DMI vector remain rare, in part due to the difficulty of separating vector components of DMI. In this study, Fe/Ni bilayers and Co/Ni multilayers were deposited epitaxially onto Cu(001) and Pt(111) substrates, respectively. By tailoring the effective anisotropy, spin reorientation transitions (SRTs) are employed to probe the orientation of the DMI vector by measuring the spin structure of domain walls on both sides of the SRTs. In our results, the interfacial DMI is found to be sufficiently strong to stabilize chiral Néel walls in the out-of-plane magnetized regimes, while achiral Néel walls are observed in the in-plane magnetized regimes. Furthermore, these findings experimentally confirm that the out-of-plane component of the DMI vector is insignificant in these fcc(001) and fcc(111) oriented interfaces, even in the presence of atomic steps.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Electronic structure, magnetic properties, spin orientation, and doping effect in Mn 3 Si 2 Te 6

The layered material Mn 3 Si 2 Te 6 , with alternating stacking honeycomb and triangular layers, is attracting considerable attention due to its rich physical properties. Here, in this study, using density functional theory and classical Monte Carlo (MC) methods, we systematically study this system with the 3d 5 electronic configuration. Near the Fermi level, the states are mainly contributed by Te 5p orbitals hybridized with Mn 3d orbitals, resembling a charge-transfer system. Furthermore, the spin orientations of the ferrimagnetic (FiM) ground state display different conductive behaviors when along the ab plane or out-of-plane directions: insulating vs metallic states. The energy difference between the FiM [110] insulating and FiM [001] metallic phases is very small (~0.71 meV/Mn) . Changing the angle θ of spin orientation from in-plane to out-of-plane directions, the band gaps of this system are gradually reduced, leading to an insulator-metal transition, resulting in an enhanced electrical conductivity, related to the colossal angular magnetoresistance (MR) effect. Although the three main magnetic couplings were found to be antiferromagnetic, overall the ground state is FiM. In addition, we also constructed the magnetic phase diagram using the classical XY spin model studied with the MC method. Three magnetic phases were obtained, including antiferromagnetic order, noncollinear spin patterns, and FiM order. Moreover, we also investigated the Se and Ge doping into the Mn 3 Si 2 Te 6 system: the FiM state has the lowest energy among the magnetic candidates for both Se- and Ge-doped cases. The magnetic anisotropy energy (MAE) decreases in the Se-doped case because the Mn orbital moment is reduced as the doping x increases. Due to the small spin-orbit-coupling effect of Se, the insulator-metal transition caused by the spin orientation disappears in the Se-doped case, resulting in an insulating phase in the FiM [001] phase. This causes a reduced colossal angular MR. However, both the MAE and the band gap of the Ge-doped case do not change much with increasing doping x . Our results for Mn 3 Si 2 Te 6 could provide guidance to experimentalists and theorists working on this system or related materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Influence of the number of orientational domains on avalanche criticality in ferroelastic transitions

In this work, we study the relationship between avalanche criticality and the number of orientational domains in ferroelastic transitions. To this end, we use a general Ginzburg-Landau model appropriate for displacive transitions of the square lattice. The model includes disorder as a quenched distribution of local transition temperatures. We focus on the square-to-rectangle and the square-to-oblique ferroelastic transitions, which have two and four orientational domains, respectively, which in turn determine the corresponding degeneracy of the ground state of the system. The phase transitions are driven by temperature under the assumption of a strict athermal behavior. That is, we assume that thermal fluctuations do not play any role. Numerical results are obtained using a purely relaxational dynamics, and it is shown that both the square-to-rectangle and the square-to-oblique transitions occur intermittently in the form of avalanches. Avalanche sizes and avalanche energies are found to display power-law distributions, which corroborates avalanche criticality. We compare and contrast the dependence of avalanche criticality on the number of orientational domains of the low-symmetry phase. It is found that the critical exponents depend on that number, in agreement with recent experimental results.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Influence of chemical composition and crystallographic orientation on the interfacial magnetism in BiFe O 3 / L a 1 - x S r x Mn O 3 superlattices

The emergence of magnetism unique to the interface between the multiferroic BiFeO 3 (BFO) and ferromagnetic La 1-x Sr x MnO 3 (LSMO) offers an opportunity to control magnetism in nanoscale heterostructures with electric fields. Here, we investigate the influence of chemical composition and crystallographic orientation on the interfacial magnetism of BFO/LSMO superlattices. Our results reveal that the induced net magnetic moment in the BFO layers increases monotonically with increasing saturation magnetization of the LSMO layers. For the (100)-BFO/LSMO (x=0.2) superlattice, the induced moment reaches a record high value of ~2.8μ B /Fe. No interfacial magnetization is observed at the (100)-BFO/LSMO interface when LSMO is an antiferromagnet. In contrast to (100)-oriented superlattices, no induced moment is observed in (111)-BFO layers. Our results suggest the interfacial structural reconstruction may not be a sufficient condition for the enhanced net moment in BFO layer. Instead, spin canting induced by interfacial exchange coupling is proposed in the (100)- but not in the (111)-BFO, leading to the large net magnetization at the (100)-oriented interface. Lastly, this work further demonstrates the importance of exchange coupling across heterointerfaces for spin canting in nominally antiferromagnets, providing a pathway to control the magnetic properties of artificial oxide heterostructures.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Mapping nanocrystal orientations via scanning Laue diffraction microscopy for multi-peak Bragg coherent diffraction imaging

The recent commissioning of a movable monochromator at the 34-ID-C endstation of the Advanced Photon Source has vastly simplified the collection of Bragg coherent diffraction imaging (BCDI) data from multiple Bragg peaks of sub-micrometre scale samples. Laue patterns arising from the scattering of a polychromatic beam by arbitrarily oriented nanocrystals permit their crystal orientations to be computed, which are then used for locating and collecting several non-co-linear Bragg reflections. The volumetric six-component strain tensor is then constructed by combining the projected displacement fields that are imaged using each of the measured reflections via iterative phase retrieval algorithms. Complications arise when the sample is heterogeneous in composition and/or when multiple grains of a given lattice structure are simultaneously illuminated by the polychromatic beam. Here, a workflow is established for orienting and mapping nanocrystals on a substrate of a different material using scanning Laue diffraction microscopy. The capabilities of the developed algorithms and procedures with both synthetic and experimental data are demonstrated. The robustness is verified by comparing experimental texture maps obtained with Laue diffraction microscopy at the beamline with maps obtained from electron back-scattering diffraction measurements on the same patch of gold nanocrystals. Such tools provide reliable indexing for both isolated and densely distributed nanocrystals, which are challenging to image in three dimensions with other techniques.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Epitaxial growth of Bi 2 Se 3 in the (0015) orientation on GaAs (001)

Here we present that materials with van der Waals bonding show exotic physics and may have applications in a variety of areas including new optoelectronic devices, spintronic devices, and as quantum materials. To date, control over the morphology and surface orientation of thin films of these materials without substrate pretreatment has been difficult. In this paper, the authors report the growth of Bi 2 Se 3 on GaAs (001) substrates. By controlling the growth conditions and adatom mobility, the authors are able to obtain epitaxial growth in the (0015) orientation without substrate prepatterning. Although the growth window is small, this demonstration opens the door for future control of the orientation of van der Waals materials through control of parameters during growth and via interaction with the substrate.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Orientation control of high-χ triblock copolymer for sub-10 nm patterning using fluorine-containing polymeric additives

Directed self-assembly (DSA) of block copolymers (BCPs) Is one of the most promising techniques to tackle the ever-increasing demand for subllthographic features In semiconductor industries. BCPs with high Flory-Huggins parameter (chi) are of particular Interest due to their ability to self-assemble at the length scale of sub-10 nm. However, such high-chi BCPs typically have imbalanced surface energies between respective blocks, making it a challenge to achieve desired perpendicular orientation. To address this challenge, we mixed a fluorine-containing polymeric additive with poly(2-vlnylpyrldine)-block-polystyrene-block-poly(2-vlnylpyrldine) (P2VP-b-PS-b-P2VP) and successfully controlled the orientation of the high-chi triblock copolymer. The additive selectively mixes with P2VP block through hydrogen bonding and can reduce the dissimilarity of surface energies between PS and P2VP blocks. After optimizing additive dose and annealing conditions, desired perpendicular orientation formed upon simple thermal annealing. We further demonstrated DSA of this material system with five times density multiplication and a half-pitch as small as 8.5 nm. This material system Is also amenable to sequential Infiltration synthesis treatment to selectively grow metal oxide In P2VP domains, which can facilitate the subsequent pattern transfer. We believe that this integration-friendly DSA platform using simple thermal annealing holds the great potential for sub-10 nm nanopatterning applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Electronic structure orientation as a map of in-plane antiferroelectricity in β'-In 2 Se 3

Antiferroelectric (AFE) materials are excellent candidates for sensors, capacitors, and data storage due to their electrical switchability and high-energy storage capacity. However, imaging the nanoscale landscape of AFE domains is notoriously inaccessible, which has hindered development and intentional tuning of AFE materials. Here, we demonstrate that polarization-dependent photoemission electron microscopy can resolve the arrangement and orientation of in-plane AFE domains on the nanoscale, despite the absence of a net lattice polarization. Through direct determination of electronic transition orientations and analysis of domain boundary constraints, we establish that antiferroelectricity in β'-In 2 Se 3 is a robust property from the scale of tens of nanometers to tens of micrometers. Ultimately, the method for imaging AFE domain organization presented here opens the door to investigations of the influence of domain formation and orientation on charge transport and dynamics.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Dielectric metasurfaces made from vertically oriented nanoresonators

Dielectric metasurfaces control optical wavefronts via nanoscale resonators laid out across a surface. However, most metasurfaces are, by design, planar. In this work, we demonstrate the ability to fabricate dielectric metasurfaces with vertically oriented dielectric resonators using membrane projection lithography. We first numerically characterize the resonant modes of an array of vertically oriented germanium ellipses with no substrate and identify a narrowband region where the resonators satisfy the first Kerker condition. We then fabricate seven metasurfaces by depositing germanium ellipses onto walls of a 3D micrometer-sized silicon nitride photonic scaffold and characterize their transmission. We find that signatures of the multipolar modes seen in the unsupported array persist in the supported array, but the overall behavior is more complicated due to the scaffold. Further, we show that for a conceptual metasurface containing two coupled, vertically oriented ellipses, the ellipses can generate a sharp resonance with a quality factor of 240.

Gennaro, Sylvain D. (ORCID:0000000222090831)↗
DOE OSTI2018

Crystal orientation-dependent polarization state of high-order harmonics

We analyze the crystal orientation-dependent polarization state of extreme ultraviolet (XUV) high-order harmonics from bulk magnesium oxide crystals subjected to intense linearly polarized laser fields. We find that only along high-symmetry directions in crystals high-order harmonics follow the polarization direction of the laser field. In general, the polarization direction of high-order harmonics deviates from that of the laser field, and the deviation amplitude depends on the crystal orientation, harmonic order and the strength of the laser field. We use a real-space electron trajectory model to understand the crystal orientation-dependent polarization state of XUV harmonics. The polarization analysis allows us to track the motion of strong-field-driven electron in conduction bands in two dimensions. These results have implications in all-optical probing of atomic-scale structure in real-space, electronic band-structure in momentum space, and in the possibility of generating attosecond pulses with time-dependent polarization in a compact setup.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Determining Stress Orientation in Rock Valley, Nevada, Using Ambient Seismic Noise

The stress field and the mechanical properties of rocks are important to consider for nuclear explosion monitoring due to their effect on seismic wave radiation from earthquakes and explosions. At the Rock Valley Direct Comparison site, the regional orientation of the maximum horizontal compressive stress (SH max ) is well constrained, but it is unknown whether there are local heterogeneities. Here, I show that stress-induced anisotropy in nonlinear elasticity can be used to estimate the orientation of SH max . Rocks have compliant internal contacts, such as fractures and mineral grain boundaries, that respond to applied strains more strongly than individual mineral crystals. This strain response is asymmetric between compressive and dilatational strains and is affected by anisotropy in the ambient stress field. Traditional seismic velocity measurements are of strain-averaged velocity, which is less sensitive than nonlinear elasticity to the behavior of compliant internal contacts and therefore the stress field and fracture behavior. My results show that the orientation of SH max measured using ambient seismic noise aligns with regional estimates, with some heterogeneity that can also be explained by the limitations of the seismic array. I demonstrate the potential of a passive technique for monitoring the stress field in places that currently lack local measurements.

58 GEOSCIENCES↗
DOE OSTI2018

3% Silicon Steel Core Material (Grain Oriented Electrical Steel) (Rev.01)

3% (Grain-Oriented) Silicon Steel is a soft magnetic material that is best used in electrical power transformers and inductors. It has a silicon content up to 3.2 mass %, which increases the electrical resistivity and reduces eddy current losses. The magnetic properties can be enhanced during a cold rolling stage (along the length) to produce textured sheets, known as grain-oriented electrical steel. Due to its preferred crystallographic orientation, it is used primarily for non-rotating applications, i.e. transformers and inductors. Typical operating frequency of 3% Silicon Steel is 50-60 Hz (hertz). A variety of forms can be manufactured, including lamination, toroidal and C-cores, as well as glued block cores of various shapes by cutting or pressing.

36 MATERIALS SCIENCE↗
DOE OSTI2018

6.5% Silicon Steel Core Material (Non-Grain Oriented Electrical Steel) (Rev.01)

6.5% (Non-Grain-Oriented) Silicon Steel is a soft magnetic material that is best used in electrical rotating machinery, such as motors and generators. It has a high silicon content up to 6.5 mass %, which reduces the alloy magnetostriction to nearly zero, but causes brittleness and other associated manufacturing challenges. Due to its more random texture compared to 3% (grain-oriented) silicon steel, 6.5% (non-grain-oriented) silicon steel is used for primarily for rotating applications, i.e. motors and generators. Typical operating frequencies of 6.5% Silicon Steel is 400 Hz (hertz). A variety of forms can be manufactured, including lamination, toroidal and C-cores, as well as glued block cores of various shapes by cutting or pressing.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Mind the crosscap: $τ$-scaling in non-orientable gravity and time-reversal-invariant systems

Spectral statistics of quantum chaotic systems are governed by random matrix universality. In many cases of interest, time-reversal symmetry selects the Gaussian Orthogonal Ensemble (GOE) as the relevant universality class. In holographic CFTs, this is mirrored by the presence of non-orientable geometries in the dual gravitational path integral. In this work, we analyze general properties of these matrix models and their gravitational counterparts. First, we develop a formalism to express the universal level statistics in the canonical ensemble for arbitrary spectral curves, leading to a topological expansion with finite radius of convergence in the late-time $τ$-scaling limit. Then, we focus on topological gravity and study topological recursion on the moduli space of non-orientable surfaces. We find that the Weil-Petersson volumes display non-analytic behaviour multiplying polynomials in the boundary lengths. The volumes give rise to wormholes with late-time divergences, in contrast with the orientable case, which is finite. We identify systematic cancellations among WP volumes implied by the consistency and finiteness of the $τ$-scaling limit. In particular, the cancellation of late-time divergences requires a nontrivial genus resummation. Working in the gravitational microcanonical ensemble, we derive and resum all orders of the topological expansion matching the GOE matrix model in the high-energy regime.

Chaotic Dynamics (nlin.CD)↗
DOE OSTI2018

Analysis of control-oriented wake modeling tools using lidar field results

Abstract. The objective of this paper is to compare field data from a scanning lidar mounted on a turbine to control-oriented wind turbine wake models. The measurements were taken from the turbine nacelle looking downstream at the turbine wake. This field campaign was used to validate control-oriented tools used for wind plant control and optimization. The National Wind Technology Center in Golden, CO, conducted a demonstration of wake steering on a utility-scale turbine. In this campaign, the turbine was operated at various yaw misalignment set points, while a lidar mounted on the nacelle scanned five downstream distances. Primarily, this paper examines measurements taken at 2.35 diameters downstream of the turbine. The lidar measurements were combined with turbine data and measurements of the inflow made by a highly instrumented meteorological mast on-site. This paper presents a quantitative analysis of the lidar data compared to the control-oriented wake models used under different atmospheric conditions and turbine operation. Furthermore, these results show that good agreement is obtained between the lidar data and the models under these different conditions.

17 WIND ENERGY↗
NASA NTRS1972

VLF/ELF input impedance of an arbitrarily oriented loop antenna in a cold collisionless multicomponent magnetoplasma.

A study is made of the input impedance Z of a small strip-loop antenna with arbitrary orientation in a cold collisionless uniform multicomponent magnetoplasma. Assuming a uniform current distribution, an integral expression for Z is derived which is valid for arbitrary values of driving frequency, plasma composition and density, loop orientation angle, and static magnetic field strength. The integral expression is evaluated numerically for the VLF/ELF range in a plasma modeled upon the inner magnetosphere. Approximate closed-form expressions for Z are also developed. It is found that the loop VLF/ELF input reactance is essentially identical to its free space self inductance. Also the loop radiation resistance is found to be a strong function of the loop orientation angle for frequencies near the lower-hybrid-resonance frequency or below the proton gyrofrequency.

Wang, T. N. C.↗
NASA NTRS1973

A study on aircraft map display location and orientation

Six airline pilots participated in a fixed-based simulator study to determine the effects of two horizontal situation display (HSD/map) panel locations relative to the vertical situation display (VSD), and of three map orientations on manual piloting performance. Pilot comments and opinions were formally obtained. Significant performance differences were found between wind conditions and among pilots but not between map locations and orientations. The results also illustrate the potential tracking accuracy of such a display. Recommendations concerning display location and map orientation are made.

Baty, D. L.↗
NASA NTRS1972

Passive solar array orientation devices for terrestrial application.

A passive solar array orientation device, called a thermal heliotrope, is described, and several terrestrial applications are illustrated. The thermal heliotrope consists of a bimetallic helical coil that serves as the motor element, producing torque and angular displacement. A control mechanism in the form of one or more shades completes the basic device. In comparison with electromechanical tracking systems, the thermal heliotrope is electrically passive, has relatively few parts, and is low cost. After describing the principle of operation and several models built for space applications, the design considerations for several terrestrial thermal heliotrope units are presented. It is suggested that the use of the thermal heliotrope for solar array orientation could significantly reduce array cost, thereby increasing the competitive economic posture of solar arrays for terrestrial applications. The thermal heliotrope modified for terrestrial use is readily adaptable to orient solar energy concentrators, such as furnaces and stills.

Fairbanks, J. W.↗