Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ORES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Quantification of Swelling in Hematite Pellets Reduced Using Hydrogen–Nitrogen Gas Mixture

Iron ore pellets are reduced in a 50%H 2 –50%N 2 1 atm gas mixture at 750, 800, 850, 900, and 950 °C while simultaneously documenting swelling (change in pellet radius) and weight change. Swelling increases with increasing temperature, with catastrophic swelling (>20% of reduction swelling index) observed at 850, 900, and 950 °C. As the pellet is reduced, the pellet radius increases until 40–50% reduction is achieved, followed by a decrease in diameter beyond 40–50% reduction at 750 and 850 °C. At 950 °C, the pellet radius continues to increase with additional pellet reduction without any subsequent decrease in diameter. Scanning electron microscopy (SEM) analysis shows that the neighboring grains inside the pellet sinter together at 750 and 850 °C, whereas the individual grains sinter internally at 950 °C. SEM analysis and observations suggest that the reduction process at 750 and 850 °C can be approximated as a topochemical reaction process, while the reduction process at 950 °C can no longer be approximated as a topochemical reaction process. In conclusion, an empirical equation for the radius of the pellet is derived with fitting parameters dependent on temperature and the degree of reduction of the pellet undergoing reduction based on the experimental data.

08 HYDROGEN↗

Experimental determination of lead carbonate solubility at high ionic strengths: A Pitzer model description

In this article, solubility measurements of lead carbonate, PbCO 3 (cr), cerussite, as a function of total ionic strengths are conducted in the mixtures of NaCl and NaHCO 3 up to I = 1.2 mol•kg –1 and in the mixtures of NaHCO 3 and Na 2 CO 3 up to I = 5.2 mol•kg –1 , at room temperature (22.5 ± 0.5 °C). The solubility constant (log K sp ) for cerussite, PbCO 3 (cr) = Pb 2+ + CO 3 2- was determined as –13.76 ± 0.15 (2σ) with a set of Pitzer parameters describing the specific interactions of PbCO 3 (aq), Pb(CO 3 ) 2 2- , and Pb(CO 3 )Cl – with the bulk-supporting electrolytes, based on the Pitzer model. The model developed in this work can reproduce the experimental results including model-independent solubility values from the literature over a wide range of ionic strengths with satisfactory accuracy. The model is expected to find applications in numerous fields, including the accurate description of chemical behavior of lead in geological repositories, the modeling of formation of oxidized Pb–Zn ore deposits, and the environmental remediation of lead contamination.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Results from the third Galaxy Serpent tabletop exercise demonstrating the utility of nuclear forensics libraries in support of an investigation

Galaxy Serpent is a virtual, web-based international ongoing series of tabletop exercises designed to mature the concept of National Nuclear Forensics Libraries (NNFL) and illustrate their utility in answering investigative questions or providing investigative leads as part of an investigation involving nuclear or other radioactive material (R/N) out of regulatory control (MORC). Two prior versions of the exercise have been conducted; the first utilizing surrogate data for spent nuclear fuel as the material of interest, and the second using synthetic sealed radioactive source data. Teams participating in the recently concluded third version of the exercise were provided with synthetic uranium ore concentrate (UOC) data mimicking actual data characteristics (e.g. trace element concentrations), which was used to compile a model NNFL. Teams decided how to organize and interpret the data they were provided, dealt with real world features such as missing data, and assessed discriminating attributes. Next, a hypothetical scenario involving three UOC samples found out of regulatory control was provided, and each team had to assess the self-consistency of the individual sources in the unknown data, and employ their model NNFL as a comparative assessment instrument to determine whether the three UOC materials in question were consistent with any of the types of materials in their library. In conclusion, the design of the exercise, methodologies utilized by participating teams, and aggregate results of the exercise will be presented, along with challenges encountered and benefits realized.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Theoretical and experimental foundations for preparing coke for blast-furnace smelting

This article examines the preparation of coke for blast-furnace smelting by a method that most fully meets the requirements of blast-furnace technology: screening of the -36 mm fraction, the separation of nut coke of the 15-36 mm fraction, and its charging into the furnace in a mixture with the iron-ore-bearing charge components. An analysis is made of trial use of coke of the Premium class on blast furnace No. 5 at the Enakievo Metallurgical Plant. Use of this coke makes it possible to reduce the consumption of skip coke by 3.2-4.1%.

01 COAL, LIGNITE, AND PEAT↗

Orebody Modelling for Exploration: The Western Mineralisation, Broken Hill, NSW

The Western Mineralisation in the Broken Hill deposit was studied to identify the zonation sequence of lithogeochemical haloes along and across the strike of the orebody. Samples used are from 77 drill holes and the samples were assayed for Pb, Zn, Fe, S, Cu, Ag, Cd, Sb, Bi and As. Variogram analyses were calculated for all the elements and kriging was used to construct the 3D block model. Analysis of cross sections along and across the strike of the orebody shows that Bi and Sb form broader halos around sulphide masses and this suggests that they are pathfinder elements for the Pb and Zn elements of this orebody. The threshold concentrations (minimum anomaly) of the 10 elements were determined using the concentration-area analysis. On east-west vertical cross sections, the values of linear productivity, variability gradient and zonality index were calculated for each element. Based on the maximum zonality index of each element, the sequence of geochemical zonation pattern was determined from top to bottom of the orebody. The result shows that S, Pb, Zn and Cd tend to concentrate in the upper part of the mineralisation whereas Ag, Cu, Bi and As have a tendency to concentrate in the lower part of the mineralised rocks. Also, an empirical product ratio index was developed based on the position of the elements in the zonation sequence. The methods and results of this research are applicable to exploration of similar Zn and Pb sulphide ore deposits.

58 GEOSCIENCES↗

A MaxEnt Model for Mineral Prospectivity Mapping

Mineral prospectivity mapping is an important preliminary step for mineral resource exploration. It has been widely applied to distinguish areas of high potential to host mineral deposits and to minimize the financial risks associated with decision making in mineral industry. In the present study, a maximum entropy (MaxEnt) model was applied to investigate its potential for mineral prospectivity analysis. A case study from the Nanling tungsten polymetallic metallogenic belt, South China, was used to evaluate its performance. In order to deal with model over-fitting, varying levels of β j -regularization were set to determine suitable β value based on response curves and receiver operating characteristic (ROC) curves, as well as via visual inspections of prospectivity maps. The area under the ROC curve (AUC = 0.863) suggests good performance of the MaxEnt model under the condition of balancing model complexity and generality. The relative importance of ore-controlling factors and their relationships with known deposits were examined by jackknife analysis and response curves. Prediction–area (P–A) curves were used to determine threshold values for demarcating high probability of tungsten polymetallic deposit occurrence within small exploration area. The final predictive map showed that high favorability zones occupy 14.5% of the study area and contain 85.5% of the known tungsten polymetallic deposits. Our study suggests that the MaxEnt model can be efficiently used to integrate multisource geo-spatial information for mineral prospectivity analysis.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spatial Simulation and Characterization of Three-Dimensional Fractures in Gejiu tin District, Southwest China, Using GEOFRAC

Fracture is an important factor controlling mineralization and ore distribution in metallic deposits. Fracture also affects mechanical stability of drifts. A plausible three-dimensional discrete fracture network (DFN) was constructed using GEOFRAC, a geostatistical method of conditioning directions (strikes and dips) and locations of sample fractures. The northern part of the Gejiu tin district, southwest China, was selected, using 10,212 fractures sampled on drift roofs at five different levels and along a 5463 m length. Key parameters of this DFN are fracture density, direction, and the connective condition of disks that form a fracture plane. The simulated fractures were verified by good correspondence of their directions with those of the sample fractures; furthermore, continuous fractures longer than 1 km matched the faults observed in outcrops. The most notable result was clarification of fracture control by the orebody shape: Simulated gentle fractures (30° dips or less) formed layered orebodies and created boundaries between each layer, while steep fractures (60° dips or more) displaced the layers by acting as faults. Such fault-type fractures and the densely fractured portions require caution with respect to mining safety. It was concluded that GEOFRAC is useful for three-dimensional DFN modeling in underground mines.

58 GEOSCIENCES↗

Crystal Phases Formed in a CaO-Fe 2 O 3 System Under a High Cooling Rate in Air

A CaO-Fe 2 O 3 system is a fundamental binary system for the iron ore sintering process. Although the basic reactions have been investigated since the 1960s, melting and solidification caused by the combustion of coke results in an unstable state owing to extreme temperature variations. In this study, using a hot thermocouple method, samples of 10 pct CaO-90 pct Fe 2 O 3 and 20 pct CaO-80 pct Fe 2 O 3 were melted on a thermocouple and quenched with several techniques. The obtained samples were precisely examined by XRD. It was found that the sample containing 10 pct CaO-90 pct Fe 2 O 3 changed to 10 pct CaO-13 pct FeO-77 pct Fe 2 O 3 under an oxygen partial pressure (P O 2 ) of 0.21 during melting. For the 10 pct CaO sample, the crystal phases found at a low cooling rate (509 K/s) were WF ss , C 4 WF 8 (C: CaO, W: FeO, F: Fe 2 O 3 ), and C 2 W 4 F 9 . When the sample composition was 20 pct CaO, the precipitated crystal phases were C 4 WF 4 , C 4 F 7 , and C 4 WF 8 . On the other hand, the crystal phases for high cooling rates (1590 and 7900 K/s) with 10 pct CaO were WF ss (solid solution of WF and F), F, and C 2 W 4 F 9 . The formation of the equilibrium phases WF ss , F, C 4 WF 4 , and C 4 WF 8 can be understood by examining the isothermal section of the phase diagrams, while the unstable phases C 2 W 4 F 9 and C 4 F 7 are discussed on the basis of the reactions under an equilibrium state.

36 MATERIALS SCIENCE↗

Solid Phase Equilibrium Relations in the CaO-SiO{sub 2}-Nb{sub 2}O{sub 5}-La{sub 2}O{sub 3} System at 1273 K

Silicate slag system with additions Nb and RE formed in the utilization of REE-Nb-Fe ore deposit resources in China has industrial uses as a metallurgical slag system. The lack of a phase diagram, theoretical, and thermodynamic information for the multi-component system restrict the comprehensive utilization process. In the current work, solid phase equilibrium relations in the CaO-SiO{sub 2}-Nb{sub 2}O{sub 5}-La{sub 2}O{sub 3} quaternary system at 1273 K (1000 °C) were investigated experimentally by the high-temperature equilibrium experiment followed by X-ray diffraction, scanning electron microscope, and energy dispersive spectrometer. Six spatial independent tetrahedron fields in the CaO-SiO{sub 2}-Nb{sub 2}O{sub 5}-La{sub 2}O{sub 3} system phase diagram were determined by the Gibbs Phase Rule. The current work combines the mass fraction of equilibrium phase and corresponding geometric relation. A determinant method was deduced to calculate the mass fraction of equilibrium phase in quaternary system according to the Mass Conservation Law, the Gibbs Phase Rule, the Lever’s Rule, and the Cramer Law.

36 MATERIALS SCIENCE↗

Distribution of P{sub 2}O{sub 5} and Na{sub 2}O Between Solid Solution and Liquid Phase in the CaO-SiO{sub 2}-Fe{sub 2}O{sub 3}-P{sub 2}O{sub 5}-Na{sub 2}O Slag System with High P{sub 2}O{sub 5} Content

The phosphorus content in hot metal will increase in future, because iron ores are steadily deteriorating in quality. Na{sub 2}O addition to slag is considered an effective method for increasing the efficiency of dephosphorization. In addition, Na{sub 2}O modification also facilitates phosphorus recovery from dephosphorization slag with high P{sub 2}O{sub 5} content by selective leaching. Therefore, it is necessary to investigate the distribution ratios of P{sub 2}O{sub 5} and Na{sub 2}O between solid solution and liquid phase in the CaO-SiO{sub 2}-Fe{sub 2}O{sub 3}-P{sub 2}O{sub 5}-Na{sub 2}O slag system. A linear relationship was found between the distribution ratio of P{sub 2}O{sub 5} and the Na{sub 2}O content in slag, and was independent of P{sub 2}O{sub 5} content. When the Na{sub 2}O content was high, the Na{sub 2}O content in the solid solution approached saturation and a new 2CaO·SiO{sub 2}-2CaO·Na{sub 2}O·P{sub 2}O{sub 5} solid solution formed. The addition of Na{sub 2}O decreased the P{sub 2}O{sub 5} content in solid solution, while it increased the mass fraction of solid solution in slag. The distribution ratio of P{sub 2}O{sub 5} increased with increase in the Fe{sub 2}O{sub 3} content and basicity of slag. An increase in P{sub 2}O{sub 5} content in slag results in an increase in the activity coefficient of P{sub 2}O{sub 5} both in the liquid phase and in the solid solution.

36 MATERIALS SCIENCE↗

Kinetic Investigations of SiMn Slags From Different Mn Sources

The kinetics of MnO and SiO 2 reduction were investigated for Silicomanganese (SiMn) slags using a Thermogravimetric analysis (TGA) between 1773 K and 1923 K (1500 °C and 1650 °C) under CO atmospheric pressure. The charge materials were based on Assmang ore and HC FeMn Slag. Rate models for MnO and SiO 2 reduction were applied to describe the metal-producing rates, as shown by the following equations: r MnO =k MnO ×A×(a MnO -((a Mn )/(K{sub T})))r SiO 2 =k SiO 2 ×A×(a SiO 2 -((a Si )/(K T ))).The results show that the choice of raw materials in the charge considerably affected the reduction rate of MnO and SiO 2 . The highest reduction rate was found to be from charges using HC FeMn slag. The difference in the driving forces was insignificant among the SiMn slags, and the similar slag viscosities could not explain the different reduction rates. Instead, the difference is attributed to small amounts of sulfur and the amount of iron in the charge. In addition, the rate models were applicable to describe the reduction of MnO and SiO 2 in SiMn slags.

36 MATERIALS SCIENCE↗

Solidification of Calcium Ferrite Melt Using Ultrasonic Vibration: Effect and Mechanism

Calcium ferrite (CF) is a very important binder phase in iron ore sintering processes. To improve the microstructure of CF, power ultrasound was introduced during its solidification process, and the effect of immersion depth of ultrasonic probe (IDUP) on the properties of CF was investigated in detail. The results indicated that the microstructure of CF was greatly refined; the grain size decreased from 2864 μm without ultrasonic vibration to 841 μm with ultrasonic vibration at an immersion depth of 30 mm. Without ultrasonic vibration, the density and compressive strength of CF slag were 3904 kg/m{sup 3} and 38.3 MPa, respectively. When the IDUP was increased from 10 to 30 mm, the density and compressive strength of CF increased from 4049 to 4452 kg/m{sup 3} and 52.5 to 87.3 MPa, respectively. Further, the reducibility of CF was examined. The reduction time, at the same reduction rate, decreased from 347 minutes without ultrasonic vibration to 200 minutes with ultrasonic vibration at an IDUP of 30 mm. The rate-limiting step was obviously improved, which may be attributable to the grain refinement of CF and composition segregation in the slag. In general, the properties of CF were greatly improved due to the cavitation and acoustic streaming of ultrasonic waves.

36 MATERIALS SCIENCE↗

Element Distribution in the Silicomanganese Production Process

A pilot scale, silicomanganese alloy production campaign was performed in a 440 kVA, single phase electric furnace in order to establish an overview of the minor- and trace element contents in process input raw materials and their distribution in the resulting primary and secondary products. Samples of the in-going raw materials (manganese ore, coke, quartzite, and high carbon ferromanganese slag) and the out-going products (silicomanganese alloy, silicomanganese slag, and dust) were analyzed by inductively coupled plasma mass spectrometry. The distribution of 51 elements between the product phases was discussed in terms of their boiling temperatures, Gibbs energies of oxidation and activity coefficients of elements in the metal. A thermochemical simulation using the thermochemical software FactSage 7.1 was also carried out in order to model element phase distribution between the alloy, slag, and dust/gas. The correlation between the model and experimental element concentrations in the silicomanganese slag and dust is fair for most elements. However, in the metal phase, fewer elements show good correlation between modeled results and measured experimental concentrations. The discrepancy could be explained by a lack of accurate thermodynamic descriptions for several minor species in the database.

36 MATERIALS SCIENCE↗

Effects of Particle Diameter and Coke Layer Thickness on Solid Flow and Stress Distribution in BF by 3D Discrete Element Method

In order to reduce ironmaking-related CO{sub 2} emissions, hydrogen-enriched blast furnace (BF) operation is currently under development. In hydrogen-enriched BF operation, coke layer thickness can be decreased to reduce CO{sub 2} emissions. However, BFs operating with thin coke layers may experience instability or discontinuous phenomena such as particle slip and gas channeling problems, so it is important to optimize the particle diameter and coke layer thickness for optimal BF operation. In this study, the effects of particle diameter and coke layer thickness on the solid flow and stress distribution in a BF were analyzed using a three-dimensional discrete element method. Furthermore, the effects of particle diameter and coke layer thickness on the burden layer stabilities, particle velocities, and particle stress distributions have been investigated. The results show that decreasing the coke layer thickness caused instability owing to the mixing of the coke and ore layers in the BF-cohesive zone and slight increases in both the average particle velocities and the average normal particle stress magnitudes. In addition, the average particle velocities and average normal particle stresses were higher for the smaller particles than for the larger ones during the simulations.

36 MATERIALS SCIENCE↗

Development of Kinetic Model for Reactions Between Cu-Containing Multicomponent Slag and Liquid Sulfide Using Coupled Reaction Model

Copper smelting slag contains less than 2 mass pct of Cu oxide and 30–50 mass pct of Fe{sub x}O. Each year, the grade of copper ore decreases, while the amount of slag generated in the copper smelting process increases. In this study, a coupled reaction model to simulate the reaction between multicomponent slag and FeS-based matte was developed using reported thermodynamic data and double-film theory for the recycling of copper smelting slag. The activity coefficients of oxides in the multicomponent slag were calculated using a regular solution. The activity coefficients of Cu{sub 2}O in the slag and those of FeS, Cu{sub 2}S, and CaS in the FeS-based matte used previously reported data. The behaviors of Cu in slag and matte were confirmed by comparing the simulated results and the reported solubility of Cu in the slag in the temperatures ranging from 1473 K to 1573 K. In addition, the effect of the input amount of FeS on the copper content of the slag was verified by comparing the results of reaction model to experimental results. Using the reaction model, the influences of the initial ratio of FeO/SiO{sub 2} of the slag, temperature, and matte composition on the behaviors of Cu in the slag and matte were investigated.

36 MATERIALS SCIENCE↗

Silicon Carbide Formation Enhanced by In-Situ-Formed Silicon Nitride: An Approach to Capture Thermal Energy of CO-Rich Off-Gas Combustion

Carbothermic smelting of ores to produce metals or alloys in alternating current open/semiclosed and closed submerged arc furnaces, or in closed direct current furnaces, results in large volumes of CO-rich off-gas being generated. Most of the CO-rich off-gas is cleaned and flared on stacks, since the storing of large volumes is problematic due to the associated toxic and explosive risks. Flaring of CO-rich off-gas results in significant wastage of energy. In this study, an alternative method to partially capture the thermal energy associated with off-gas combustion, in the form of silicon carbide (SiC) generated from waste materials (quartz and anthracite fines), is proposed. SiC can partially replace conventional carbonaceous reductants used to produce alloys such as ferrochromium. The influences of quartz and anthracite particle size, treatment temperature, and gaseous atmosphere (nitrogen or air) on SiC formation were investigated. A quartz-anthracite mixture with 90 pct of the particles < 350.9 µm carbothermically treated at 1873.15 K (1600 °C) resulted in almost complete conversion of quartz to SiC in both nitrogen and air atmospheres. The study indicated significant potential for industrial application of the process.

36 MATERIALS SCIENCE↗

Measurement of the Activity Coefficients of P and Mn in Carbon-Saturated Fe-P-Mn-C Alloy

The thermodynamic properties of the Fe-P-Mn-C(sat.) alloy, which is obtained following the reduction of steelmaking slag or manganese ore, are not adequately clarified. Thus, the current study involved measuring the activity coefficients of both Mn and P in the alloy system. The Fe-P-Mn-C (sat.) alloy (2.5 to 15.2 mass pct of P and 2.9 to 12.8 mass pct of Mn) was equilibrated with Ag in a graphite crucible at 1673 K, and thus several thermodynamic data were obtained as follows: Interaction parameters: ε{sub Mn (C sat.)}{sup P}=− 4.72±0.27,(X{sub Mn}<0.06, X{sub P}<0.25, 1673K), ε{sub C (C sat.)}{sup P}=6.09 ± 0.15, (X{sub Mn}<0.06, X{sub P}<0.25, 1673K). C solubility: X{sub C[in Fe-P-Mn-C(sat.)]}=0.19e{sup −(6.09X{sub P}− 0.47X{sub M}{sub n})}. Activity coefficient: lnγ{sub Mn [in Fe-P-Mn-C(sat.)]}=− 4.72X{sub P}−0.47X{sub C}−0.87, lnγ{sub P [in Fe-P-Mn-C(sat.)]}{sup H}−lnγ{sub P [in Fe-P-C]}{sup H}=ε{sub P}{sup Mn}X{sub Mn}=−4.72X{sub Mn}, and lnγ{sub P [in Fe-P-Mn-C (sat.)]}{sup H}=−4.72X{sub Mn}+4.26X{sub P}+6.09X{sub C}. In addition, a comparison with the results obtained by previous studies on the selective reduction of steelmaking slag indicated that the activity coefficients of P and Mn obtained in the study were applicable.

36 MATERIALS SCIENCE↗

Oxidation Behavior of Copper Concentrate, Gold Concentrate, and Their Mixtures Between 1173 K (900 °C) and 1373 K (1100 °C)

Gold is typically extracted from ores using a cyanidation process. However, environmental regulations and low productivity are the main drawbacks of cyanide usage. Alternative technologies for gold extraction are being studied although development of any new technology necessitates additional investments. In South Korea, recovery of gold and silver is performed by the local copper producer by feeding gold concentrate into a smelter. An integrated copper-making process might be an efficient and feasible alternative for the extraction of precious metals without the use of toxic cyanide. Installed exhaust gas cleaning system of copper smelter would minimize the toxic effects of hazardous elements (arsenic, bismuth, antimony, etc.) contained in gold concentrates. A kinetic and thermodynamic understanding of the effects of gold concentrates on copper metallurgy is necessary for the operation. The effects of various parameters on the oxidation kinetics of sulfides were investigated.

36 MATERIALS SCIENCE↗