Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NEUTRON SCIENCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Identification of Material Type and Thickness Using Combined X-ray and Fast Neutron Radiography

Material identification (ID) using radiography is a problem that has implicitly existed since the discovery of the X-ray. Since 9-11, this problem has received renewed attention for homeland security applications of the generic, “what is in the box?” type1. Examples of items potentially in the box include: roadside bombs, nuclear weapons, contraband shipments and the like. In these cases, the “what” can include: explosives, projectiles, fissile material, or drugs. Here we investigate the ability of 60Co gamma-rays, 14MeV neutrons, and their combination to tease apart information about density, thickness and atomic number of items in the box. That information subset can be combined with other types of independent information (e.g. neutron and gammaspectroscopy, intelligence, photographs etc.) to assert a more complete picture of what, exactly, is in the box? That more complete information set can form the basis for actions including: remote detonation, evacuations, disablement, detention, search, arrest etc.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Post Irradiation Examination of Fast Neutron Irradiated 14YWT Tubes at Nuclear Science User Facilities

Cladding materials for next generation nuclear reactors require resistance to high doses of fast neutron flux. Work through the Department of Energy's (DOE) Nuclear Technology Research and Development (NTR and D) Program's Advanced Fuel Campaign has identified 14YWT, a nano-ferritic oxide dispersion strengthened alloy as a promising alloy and has made a 50 kg batch of material, FCRD-NFA1, with nominal composition Fe-14Cr-3W0.4Ti-0.2Y in weight percentage. Plates were extruded from milled powder at Oak Ridge National Laboratory and then electro-discharge machined (EDM) into two sizes of tubes at Los Alamos National Laboratory (LANL). The OD of the tubes were polished to remove the EDM recast layer. Twenty-four of these tubes were placed into the BOR60 reactor, a sodium fast reactor, at the RIAR lab in Dimitrovgrad Russia. Irradiation conditions depended on exact location within the reactor, but the two samples in this study (L108 and L202) were irradiated to 7 dpa at 360-370 deg. C (Sample L108), and 6 dpa at 385-430 deg. C (L202). More detailed temperature models are pending for sample L202. Post irradiation examination took place at both LANL and the University of California, Berkeley (UCB). Facilities used at LANL (CMR Wing 9 Hot Cells, Electron Microscopy Lab (EML)) are part of a pending NSUF partner facility application, while the work at UCB was completed under a Nuclear Science User Facility, Rapid Turnaround Experiment Proposal (NSUF-RTE)

36 MATERIALS SCIENCE↗
DOE OSTI2019

Restart of the Transient Reactor Test (TREAT) Facility Neutron Radiography Program

The TREAT radiography system is used to perform neutron radiography of fuels, experiments, and other specimens before and after irradiation within the TREAT reactor. The TREAT neutron radiography facility performed approximately 5,000 radiographs by the spring of 1977. Originally built in 1958, the TREAT Facility was in operation until it was placed in a shutdown status in 1994. Following the Fukishima disaster and seeing a need for enhanced accident tolerant fuels, the United Stated Department of Energy decided to restart the TREAT facility and resume transient operations. In November 2017, the TREAT reactor was successfully restarted and is currently performing operational testing in preparation for initial experiment irradiations and transient testing. This paper discusses efforts to reactivate the TREAT neutron radiography facility. To characterize the neutron beam, gold foil activation measurements were made to determine an average neutron flux and flux profile. An open beam image provides the information about variations in the beam profile. In conclusion, a series of system qualification radiographs have been acquired to determine the effective image acquisition parameters, resulting image quality, and the relationships between the two.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Study on the residual stress relaxation in girth-welded steel pipes under bending load using diffraction methods

This research is dedicated to the experimental investigation of the residual stress relaxation in girth-welded pipes due to quasi-static bending loads. Ferritic-pearlitic steel pipes are welded with two passes, resulting in a characteristic residual stress state with high tensile residual stresses at the weld root. Also, four-point bending is applied to generate axial load stress causing changes in the residual stress state. These are determined both on the outer and inner surfaces of the pipes, as well as in the pipe wall, using X-ray and neutron diffraction. Focusing on the effect of tensile load stress, it is revealed that not only the tensile residual stresses are reduced due to exceeding the yield stress, but also the compressive residual stresses for equilibrium reasons. Furthermore, residual stress relaxation occurs both parallel and perpendicular to the applied load stress.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Study of Protein Dynamics via Neutron Spin Echo Spectroscopy

Most human body proteins' activity and functionality are related to configurational changes of entire subdomains within the protein crystal structure. The crystal structures build the basis for any calculation that describes the structure or dynamics of a protein, most of the time with strong geometrical restrictions. However, these restrictions from the crystal structure are not present in the solution. The structure of the proteins in the solution may differ from the crystal due to rearrangements of loops or subdomains on the pico to nanosecond time scale (i.e., the internal protein dynamics time regime). This study describes how slow motions on timescales of several tens of nanoseconds can be accessed using neutron scattering. In particular, the dynamical characterization of two major human proteins, an intrinsically disordered protein that lacks a well-defined secondary structure and a classical antibody protein, is addressed by neutron spin echo spectroscopy (NSE) combined with a wide range of laboratory characterization methods. Further insights into protein domain dynamics were achieved using mathematical modeling to describe the experimental neutron data and determine the crossover between combined diffusive and internal protein motions. The extraction of the internal dynamic contribution to the intermediate scattering function obtained from NSE, including the timescale of the various movements, allows further vision into the mechanical properties of single proteins and the softness of proteins in their nearly natural environment in the crowded protein solution.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2012

Particle Energy Spectrum, Revisited from a Counting Statistics Perspective

In nuclear science, gamma and neutron spectra are counted energy by energy, and then particle by particle. Until recently, few studies have been performed on how exactly those energy spectra are counted, or how those counts are correlated. Because of lack of investigation, cross section covariance and correlation matrices are usually estimated using perturbation method. We will discuss a statistical counting scheme that shall mimic the gamma and neutron counting process used in nuclear science. From this counting scheme, the cross section covariance and correlation can be statistically derived.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Intramolecular structure and dynamics in computationally designed peptide-based polymers displaying tunable chain stiffness

Here, polymers assembled using computationally designed coiled coil bundlemers display tunable stiffness via control of interbundlemer covalent connectivity as confirmed using small-angle neutron scattering. Neutron spin echo spectroscopy reveals that rigid rod polymers show a decay rate Γ~Q 2 (Q is the scattering vector) expected of straight cylinders. Semirigid polymers assembled using bundlemers linked via 4-armed organic linker show flexible segmental dynamics at mid-Q and Γ~Q 2 behavior at high Q. The results give insight into linker flexibility-dependent interbundlemer dynamics in the hybrid polymers.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Using micro-XRF to characterize chloride ingress through cold joints in 3D printed concrete

Digital fabrication methods with concrete have been rapidly developing, with many problems related to component production and material control being solved in recent years. These processes produce inherently layered cementitious components that are anisotropic, and in many cases, produces a weak interface between layers, which are generally referred to as cold joints. While material strength at these interfaces has been well studied in recent years, durability has received less attention, even though cold joints can function as channels for aggressive agents, such as chlorides. This work presents a method using micro-X-ray fluorescence (μXRF) to image chloride ingress into layer interfaces of 3D printed fine-grained concrete specimens produced with varying layer deposition time intervals, and also compares it to neutron imaging of moisture uptake. The results show that cold joints formed after a 1 day time interval are highly susceptible to chloride ingress, and that curing conditions play a major role in how quickly interfacial transport can take place. The μXRF method is also shown to be useful for study of transport of chlorides in cold joints, due to its spatial resolution and direct analysis of an aggressive species of interest.

36 MATERIALS SCIENCE↗
DOE OSTI2016

In situ investigations of the hydrogen uptake of zirconium alloys during steam oxidation - 2016-0041

The hydrogen uptake during steam oxidation of Zircaloy-4 and E110 was investigated in situ in the temperature range of 1,000-1,300 deg. C. The procedure to determine hydrogen concentrations from the neutron radiographs measured is explained in detail. Very fast hydrogen absorption (less than 10 s) was observed directly after starting the steam injection. The maximal hydrogen concentration reached increased with increasing temperatures. A slight release of hydrogen was observed after this first fast hydrogen uptake. The hydrogen concentration depended on time with a power of -1/8. An enhanced hydrogen uptake occurred if the oxidation switched into the breakaway mode. The hydrogen concentration increased by nearly one order of magnitude. (authors)

36 MATERIALS SCIENCE↗
DOE OSTI2022

Effect of atomic size mismatch and chemical complexity on the local lattice distortion of BCC solid solution alloys

Here, the effects of atomic size mismatch and chemical complexity on the local lattice distortion of solid-solution alloys VNbTa, TiVNbMo, TiVNbMoTa and TiVNbMoTaWRe with body-centered cubic (BCC) structure are quantitatively studied with time-of-flight neutron total scattering, extended X-ray absorption fine structure (EXAFS) measurements and first principles calculations. Neutron atomic pair distribution function (PDF) measurements found that the local lattice distortion in the ternary solid-solution alloy VNbTa is 1.1 %, obviously larger than that of the most complicated solid-solution alloy (0.27% for TiVNbMoTaWRe). Our results suggested that atomic size mismatch in high entropy alloys is more critical to the local lattice distortion than chemical complexity. Both EXAFS analysis and theoretical calculations indicate that there is a maximum of ~4 % difference between the bonding length of different atomic pairs in VNbTa.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Complexity of deformation mechanism in neutron-irradiated 304L austenitic stainless steel at microstructural scale

The deformation mechanisms of neutron-irradiated 304 L stainless steel have been investigated using the in-situ electron backscattered diffraction (EBSD) technique. To decipher the role of irradiation, a detailed analysis was performed on irradiated miniature samples and compared with nonirradiated samples. Furthermore, at three levels of engineering strain, —0.0%, 4.8%, and 14.5%—microstructural features as well as EBSD were recorded at the identical location during in-situ deformation testing. Post-mortem analysis of the EBSD data revealed that the neutron-irradiated samples had higher fractions of the slip bands even at low amounts of deformation. Along with the slip bands, the neutron-irradiated sample showed the twins and martensitic phase formed almost parallel to the slip bands. In addition, the image results also indicated that the formation of twins and phases associated with the slip bands. A detailed mechanistic understanding has been investigated to identify the (111)γ planes orientation with respect to the loading direction associated with the formation of twins and martensite. The newly formed deformation twins and martensite were also found to maintain this relationship when they existed together.

304L austenitic stainless steel↗
DOE OSTI2021

Phase segregation mechanisms of small molecule-polymer blends unraveled by varying polymer chain architecture

As phase separation between the small-molecule semiconductor and the polymer binder is the key enabler of blend-based organic field-effect transistors (OFETs) fabricated by low-cost solution processing, it is crucial to understand the underlying phase separation mechanisms that determine the phase morphology, which significantly impacts device performance. Beyond the parameter space investigated in previous work, here we investigate the formation of blends by varying the branch architecture of the polymer binder and by shortening the solvent dry time using ultrasonic spray casting. The phase morphologies of the resulting blend films have been thoroughly characterized with a variety of techniques in three dimensions over multiple length scales, including AFM, energy-filtered transmission electron microscope, and neutron reflectivity, and have been correlated with electrical transport performance. From the results, we have inferred that the phase morphology is kinetically determined, limited by the inherent slow movement of polymer macromolecules. The kinetic picture, supported by molecular dynamics modeling, not only consistently explains our observations but also resolves inconsistencies in previous works. The achieved mechanistic understanding will guide further optimization of blend-based organic electronics, such as OFETs and organic photovoltaics.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Structural properties of aqueous grown polydopamine thin films determined by neutron reflectometry

Here, in this work, neutron reflectometry (NR) studies of the bio-mimetic polymer, polydopamine (PDA), deposited from differing initial concentrations of precursor material dopamine hydrochloride for a range of polymerization times, is reported. PDA can form a complex and highly versatile polymer film, with many structure studies having been performed previously, but a comprehensive structural determination of PDA by NR is lacking in the literature. It was found that simple box models were incapable of fully explaining the observed data, necessitating the use of a composite model consisting of the weighted average of both the 1 and 2 box models to fully capture the heterogeneous nature of the PDA film structure. Confocal laser scanning microscopy (CLSM) and atomic force microscopy (AFM) were performed to capture the surface structure and relative mechanical difference between the separate domains of the PDA. The CLSM results provide evidence that the PDA domains are larger than the coherent scattering length of a neutron used in these measurements, 10μm, supporting the need for a composite model. The AFM measurements show complex structure below the coherence length provide physical justification for the two box model. It was determined that film structure and quality are both heavily impacted by the initial concentration of dopamine hydrochloride and the polymerization time, giving confidence to the highly customizable nature of PDA as an adhesion promoting interface treatment in composite systems, such as plastic bonded explosives (PBX).

36 MATERIALS SCIENCE↗
DOE OSTI2024

Poster for 12th World Conference for Neutron Radiography (WCNR-12)

Complimentary Relationships Between Neutron Computed Radiography and Digital X-ray Radiography of Radioactive Specimens The Transient Reactor Test (TREAT) Facility is a 19,000 MW reactor located at the Idaho National Laboratory which is used for transient testing of materials and experiments. A neutron radiography facility is installed which allows for low resolution neutron imaging with a capability of items up to 20 cm wide and 400 cm long. Along with the neutron radiography facility, a 370 kV digital X-ray system is located onsite for when X-ray imaging is more practical or when rapid imaging is requested. The X-ray facility can accommodate specimens up to 61 cm wide and 1000 cm long. This poster discusses the complimentary relationship between transfer-method Neutron Computed Radiography (nCR) and Digital X-ray Radiography (DR) imaging of radioactive specimens along with practical applications for nuclear fuels and materials testing programs. Both nCR and DR images were acquired of inert gas and water filled apparatus containing differing materials at varying radiation levels. Highly radioactive items have no effect on nCR image quality whereas radioactivity has varying degrees of effect in DR. Radioactive items as high as 20 mSv/h have been successfully imaged using X-ray DR methods.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Strong, Yet Split Hydrogen Bonding with Ice Rules in Delafossite (H/D)RhO 2

Despite remaining enigmatic, strong hydrogen bonding provides an advanced design handle for tailoring the properties of functional materials. Here, in this study, 3 R –(H/D)RhO 2 delafossites (prepared by ion exchange of Na + from NaRhO 2 ) contain H/D in linear coordination with O, linking Rh III O 2 layers. Bragg and real-space X-ray and neutron scattering analysis, vibrational and solid-state NMR spectroscopy, and density functional theory (DFT)–based electronic structure calculations have been employed to understand the nature of the hydrogen bonding. Despite short distances between H/D and the two O to which they are bonded, a clear double-minimum corresponding to a shorter and longer (H/D)–O distance is established. The triangular lattices formed by H/D appear to display ice-like disorder, corroborated by low-temperature heat capacity measurements.

NMR spectroscopy↗
DOE OSTI2020

Insights into the Water Transport Mechanism in Polymeric Membranes from Neutron Scattering

Polymeric membranes are ubiquitous in transport applications including gas separation, water desalination, solid-state batteries, and fuel cells. The transport mechanism in certain classes of membranes is well understood. It is generally believed that polymeric membranes used in gas separation follow the solution-diffusion model. However, the transport mechanism in other membranes such as the ones used in water desalination is less clear as both the solution-diffusion and hydrodynamic models have been proposed. In this contribution, we study the structure as well as the water and polymer dynamics of several polymeric membranes using small-angle and quasi-elastic neutron scattering. We demonstrate that on the scale of a few nanometers, water appears to diffuse through a desalination membrane at a rate comparable to bulk water, while water diffuses at a rate that is a factor of 2 slower in an anion-exchange membrane. These results illustrate the importance of studying both the structure and dynamics of membrane materials and have important implications in understanding the transport mechanisms that differentiate the different types of polymeric membranes.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Parametric study of residual stress formation in Wire and Arc Additive Manufacturing

Here, a finite element model was created to simulate the Wire Arc Additive Manufacturing (WAAM) thermal and mechanical processes of Inconel 718 on a A36 steel substrate, as well as the effects of process parameters on Residual Stress (RS). The model was verified using temperature data obtained from three thermocouples attached to the upper surface of the build substrate and micro-strain measurements obtained from Neutron Diffraction (ND) measurement. The model was then used to study the effects of changing the torch travel speed and interlayer dwell time. The study found that travel speed has little effect on RS when maintaining the same heat input rate. As well, the interlayer dwell time has a strong effect on RS. Reducing the dwell time causes the stress profiles to become relatively uniform and a high-stress region extends deeper along the build direction. This study provides important insight into mechanical stresses inside large walls made by the WAAM method.

36 MATERIALS SCIENCE↗