Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Morphological”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Nonplanar interface morphologies during unidirectional solidification of a binary alloy. II - Three-dimensional computations

A finite difference method is used to obtain three-dimensional steady-state solutions for nonplanar interface morphologies in order to study the situation of equal thermal properties in the crystal and melt with negligible latent heat release. Stable steady-state solutions corresponding to two-dimensional bands and three-dimensional hexagonal nodes, as well as to rectangular interface planiforms, are found using a model of an aluminum-chromium alloy with a distribution coefficient of greater than one. Hexagonal nodes are predicted near the onset of instability, in agreement with weakly nonlinear theory.

Mcfadden, G. B.↗

The morphology of multiple-nucleus brightest cluster galaxies

The morphology of high SNR CCD images of 16 multiple-nucleus brightest cluster galaxies is studied using an algorithm that models images of the systems as the line-of-sight superposition of normal elliptical galaxies. The algorithm is applied initially to the classic multiple-nucleus cD galaxy in A2199. Evidence is found suggestive of deep interpenetrating high-speed encounters by its secondaries. The interactions effects studied include noncentric isophotes, brightness profile effects, excess light around primary galaxies, and dynamical friction wakes. The results show that in many cases multiple systems are interacting systems.

Lauer, Tod R.↗

Monte Carlo particle-trajectory models for neutral cometary gases. I - Models and equations. II - The spatial morphology of the Lyman-alpha coma

The mathematical derivations of various methods employed in the Monte Carlo particle-trajectory model (MCPTM) are presented, and the application of the MCPTM to the calculation of the photochemical heating of the inner coma through the partial thermalization of cometary hydrogen atoms produced by the photodissociation of water is discussed. This model is then used to explain the observed morphology of the spatially extended Ly-alpha comas of comets. The rocket and Skylab images of the Ly-alpha coma of Comet Kohoutek are examined.

Combi, Michael R.↗

Statistics of galaxy orientations - Morphology and large-scale structure

Using the Uppsala General Catalog of bright galaxies and the northern and southern maps of the Lick counts of galaxies, statistical evidence of a morphology-orientation effect is found. Major axes of elliptical galaxies are preferentially oriented along the large-scale features of the Lick maps. However, the orientations of the major axes of spiral and lenticular galaxies show no clear signs of significant nonrandom behavior at a level of less than about one-fifth of the effect seen for ellipticals. The angular scale of the detected alignment effect for Uppsala ellipticals extends to at least theta of about 2 deg, which at a redshift of z of about 0.02 corresponds to a linear scale of about 2/h Mpc.

Lambas, Diego G.↗

On the relationship between dynamics of the polar thermosphere and morphology of the aurora - Global-scale observations from Dynamics Explorers 1 and 2

The effect of the neutral-air circulation in the high-latitude F region on the spatial distribution of the aurora is investigated on the basis of simultaneous global-scale auroral images and neutral-wind vectors obtained over the northern polar cap by the DE 1 and DE 2 satellites in December 1981. The results are presented graphically, along with DE 2 data on the composition, ion densities, and cross-track ion drift of the neutral winds and ISEE-3 IMF measurements, and analyzed. It is found that the large-scale features of the neutral circulation follow the substorm-driven expansion and contraction of the auroral oval, and that the drag effect from ions convecting sunward extends to much lower latitudes and has a more complex morphology than that predicted by GCMs. A number of asymmetries in the flow patterns are considered in detail.

Killeen, T. L.↗

The effect of an electric field on the morphological stability of the crystal-melt interface of a binary alloy

A fully time-dependent linear stability analysis of the morphological stability of a planar interface during directional solidification of a binary alloy at constant velocity in the presence of an electric field, is performed. The electromigration of solute and the differing electrical conductivities of solid and liquid for a model in which the temperature gradient is constant are taken into account. The present results are compared with the constitutional supercooling criterion, and it is shown there may be substantial differences. A modified constitutional supercooling criterion which is valid over a large range of conditions is derived. It is also found under certain conditions that the onset of instability may be time dependent.

Wheeler, A. A.↗

The three-dimensional morphology of the Antarctic ozone minimum

The three-dimensional morphology of the Antarctic ozone minimum was obtained by mapping ozone distribution data from Nimbus-7 solar backscatter UV instrument, obtained at different pressure levels, on a south polar projection. These maps show that a clearly defined ozone minimum relative to the local ozone field extends throughout the stratosphere from about 10 km to above 50 km, though the intensity of the ozone decrease becomes less with altitude. The examination of the behavior of the general ozone-hole area suggests the existence of at least three distinct regions: (1) the region below 33 km, where ozone follows the pattern of the ozone hole, exhibiting a strong trend since 1979 and decreasing from late August to a minimum in October; (2) the 33-43 km height region of relatively stable ozone concentration; and (3) the region above 43 km, where ozone is again fluctuating, with a decrease during September to a minimum in October.

Aikin, A. C.↗

Low altitude transverse ion acceleration - Auroral morphology and in-situ plasma observations

Detailed plasma and field measurements acquired from a recent sounding rocket within regions of transverse ion acceleration near 500 km altitude during a large auroral substorm at Churchill (Canada) are described. Data from simultaneous ground-based observations of the optical auroral morphology are presented as well. Ionospheric ions were energized to about 300 eV, perpendicular to the local geomagnetic field to within about 1-2 deg. The results are suggestive of parametric decay of large-amplitude lower hybrid waves into H(+) Bernstein waves, resulting in the transverse ion acceleration.

Yau, A. W.↗

Continental scale variability in vegetation reflectance and its relationship to canopy morphology

The spectral canopy reflectance, biomass, and projected leaf-area index (LAI) of widely dispersed plots of a North American coastal plant were measured in order to study potential impacts of continental-scale environmental variability on the assumptions underlying remote vegetation analysis. Systematic changes in the canopy geometry and resultant near-infrared reflectance of this plant were noted. Mean infrared canopy reflectances of canopies in the northern half of the range were shown to nearly double those of the southern half. It is suggested that the difference results from divergent canopy morphologies, with the northern canopies presenting greater horizontally projected LAIs per unit biomass than southern canopies.

Bartlett, D. S.↗

Ice or liquid water in the Martian regolith. Morphologic indicators from rampart craters

The morphology of ejecta blankets around certain Martian craters carries implications for volatiles in either the Martian crust or the atmosphere or both. The evidence that rampart crater ejecta can be used to infer the physical condition of volatiles in target rocks at the time of impact is reviewed. It was concluded that ice, and not liquid water, was the main volatile state, although rare examples also suggest the presence of liquid water at the time the craters were formed.

Mouginismark, P. J.↗

The threee-dimensional morphology of the Antarctic ozone hole

The three-dimensional morphology of the spring antarctic ozone distribution as determined by the Nimbus 7 Solar Backscatter Ultraviolet (SBUV) spectrometer instrument is presented for the period 1 to 11 October in 1986. The data show that a clearly defined minimum in ozone relative to the local ozone field extends throughout the stratosphere from the tropopause to above 50 km, though decreasing in intensity with altitude. Near 18 km ozone in the ozone hole is 50 percent less than the average surrounding ozone. But even at 50 km the ozone is 20 percent less than the surrounding ozone field. The ozone minimum in the upper stratosphere is displaced about 6 degrees toward the equator so that observations at a fixed station may provide the illusion that the ozone minimum is restricted only to low altitudes. While the ozone minimum is spatially coherent throughout the stratosphere, there are differences in the behavior of ozone at different altitudes that suggest the existence of at least three distinct altitude domains. Below 30 km ozone is characterized by classic ozone hole behavior. Between 33 and 43 km ozone is more stable, actually increasing during September and October. Above 43 km ozone has always decreased during September to a minimum in October, but it has suffered a long term decrease of 7 to 12 percent since 1979 similar to that seen at low altitudes.

Aikin, Arthur C.↗

Crystal growth of CdTe in space and thermal field effects on mass flux and morphology

The primary, long-range goals are the development of vapor phase crystal growth experiments, and the growth of technologically useful crystals in space. The necessary ground-based studies include measurements of the effects of temperature variations on the mass flux and crystal morphology in vapor-solid growth processes. For in-situ mass flux measurements dynamic microbalance techniques will be employed. Crystal growth procedures and equipment will be developed to be compatible with microgravity conditions and flight requirements. Emphasis was placed on the further development of crystal growth and the investigation of relevant transport properties of CdTe. The dependence of the mass flux on source temperature was experimentally established. The CdTe synthesis and pretreatment procedures are being developed that yield considerable improvements in mass transport rates, and mass fluxes which are independent of the amount of source material. A higher degree of stoichiometric control of CdTe than before was achieved during this period of investigation. Based on this, a CdTe crystal growth experiment, employing physical vapor transport, yielded very promising results. Optical microscopy and X-ray diffraction studies revealed that the boule contained several large sized crystal grains of a high degree of crystallinity. Further characterization studies of CdTe crystals are in progress. The reaction chamber, furnace dimensions, and ampoule location of the dynamic microbalance system were modified in order to minimize radiation effects on the balance performance.

Wiedemeier, H.↗

The effects of temperature gradient and growth rate on the morphology and fatigue properties of MAR-M246(Hf)

MAR-M246(Hf) is a nickel based superalloy used in the turbopump blades of the Space Shuttle main engines. The effects are considered of temperature gradient (G) and growth rate (R) on the microstructure and fatigue properties of this superalloy. The primary dendrite arm spacings were found to be inversely proportional to both temperature gradient and growth rate. Carbide and gamma - gamma prime morphology trends were related to G/R ratios. Weibull analysis of fatigue results shows the characteristic life to be larger by a factor of 10 for the low gradient/fast rate pairing of G and R, while the reliability (beta) was lower.

Schmidt, D. D.↗

Morphological study of near threshold fatigue crack growth in a coarse grain aluminum alloy

Fatigue crack propagation in the near-threshold region has been studied in coarse grain Al 7029 alloy. Over eighty percent of the crack surfaces are planar areas parallel to either 100-oriented or 111-oriented planes. The 100-plane crack surfaces show 'pine tree' morphological features formed by slip on two sets of intersecting planes. The 111-plane crack surfaces were planar and shiny. They were formed primarily by slip on a single dominant 111-oriented slip plane with sparse and very light secondary slip markings. Crack growth rates were measured and correlated with Delta-K.

Maurer, Gerhard↗

Heat of mixing and morphological stability

A mathematical model, which incorporates heat of mixing in the energy balance, has been developed to analyze the morphological stability of a planar solid-liquid interface during the directional solidification of a binary alloy. It is observed that the stability behavior is almost that predicted by the analysis of Mullins and Sekerka (1963) at low growth velocities, while deviations in the critical concentration of about 20-25 percent are observed under rapid solidification conditions for certain systems. The calculations indicate that a positive heat of mixing makes the planar interface more unstable, whereas a negative heat of mixing makes it more stable, in terms of the critical concentration.

Nandapurkar, P.↗

Buoyancy effects on morphological instability during directional solidification

The onset of morphological instability during the directional solidification of a single-phase binary alloy at constant velocity vertically upwards is treated by a linear stability analysis. The case in which a heavier solute is rejected at the solidifying interface is considered, and the effect of natural convection on the critical concentration for the onset of instability is studied. For tin containing lead, a small destabilization of the system at low growth velocities, and a large increase in the wavelength of the instability at the onset are found. Calculations show that the destabilization is enhanced as the variation of density with solute concentration is reduced, and in the limit of neutrally-dense solute, there is a long wavelength instability for which the critical solute concentration is several orders of magnitude lower than that predicted by the Mullins and Sekerka (1964) analysis in the absence of convection. For the neutrally-dense solute, a simplified analysis indicates the roles played by the interface deformation and thermal convection in promoting the instability. In particular, the destabilization is very sensitive to the ratio of crystal and melt thermal conductivities.

Coriell, S. R.↗

Process dependent morphology of the Si/SiO2 interface measured with scanning tunneling microscopy

A new experimental technique to determine Si/SiO2 interface morphology is described. Thermal oxides of silicon are chemically removed, and the resulting surface topography is measured with scanning tunneling microscopy. Interfaces prepared by oxidation of Si (100) and (111) surfaces, followed by postoxidation anneal (POA) at different temperatures, have been characterized. Correlations between interface structure, chemistry, and electrical characteristics are described.

Hecht, Michael H.↗

The morphologies and physical properties of ultracompact H II regions

Seventy-five ultracompact (UC) H II regions are observed 0.4 arcsec resolution at 2 and 6 cm using the Very Large Array, and their radio continuum brightness distributions are presented in the form of contour plots. H-76 alpha recombination line profiles are obtained for six sources using a 4.4 arcsec beam. It is shown that these UC H II regions have electron densities of at least approximately 10,000 per cubic cm, emission measures of at least approximately 10 to the 7th pc cm to the -6th, and diameters no more than approximately 0.1 pc, consistent with their being small photoionized nebulae produced by O and B stars embedded in clouds of molecular gas and dust. At high angular resolution five different morphologies of the ionized gas are seen: spherical or unresolved (43 percent), cometary (20 percent), core-halo (16 percent), shell (4 percent), and irregular or multiply peaked (17 percent). Evidence is presented that the UC H II region phase of a massive star must last for a significant fraction of its main-sequence lifetime.

Wood, Douglas O. S.↗